python-csvkit-1.0.5-bp156.3.1

- Add missing Requires. (bsc#1227705)

- Drop py2 deps as it works only on py3 atm

- Update to 1.0.4:
  * Dropped Python 3.3 support (end-of-life was September 29, 2017).
  * :doc:`/scripts/csvsql` adds a --chunk-size option to set the chunk size when batch inserting into a table.
  * csvkit is now tested against Python 3.7.
  * Dates and datetimes without punctuation can be parsed with --date-format and datetime-format.
  * Error messages about column indices use 1-based numbering unless --zero is set.
- Remove merged patch remove-unittest2.patch

- Remove devel dependency and do not use symlinks on fdupes call

- Drop py2 deps as it works only on py3 atm

- update to v1.0.5
  * dropped py 3.4 support
  * fix tests
  * minor fixes
- switch from nose to unittest

- Drop python2 support due to dependencies dropping python2 support

- boo#1133137: Fix FTBFS python-csvkit (failing tests gh#wireservice/csvkit#1027)

- Update to 1.0.4:
  * Dropped Python 3.3 support (end-of-life was September 29, 2017).
  * :doc:`/scripts/csvsql` adds a --chunk-size option to set the chunk size when batch inserting into a table.
  * csvkit is now tested against Python 3.7.
  * Dates and datetimes without punctuation can be parsed with --date-format and datetime-format.
  * Error messages about column indices use 1-based numbering unless --zero is set.
- Remove merged patch remove-unittest2.patch

- Remove devel dependency and do not use symlinks on fdupes call

- We already use six, so it is better to use monkey-patching already
  prepared there. remove-unittest2.patch updated.
  Upstream pull request https://github.com/wireservice/csvkit/pull/979

- Remove unnecessary unittest2 dependency
  (Patch remove-unittest2.patch makes necessary changes)

- Remove bias from descriptions.

- Remove unneded dependencies

- Update to 1.0.3
  + Improvements:
  * :doc:`/scripts/csvgrep` adds a :code:`--any-match` (:code:`-a`) flag to select rows where any column matches instead of all columns.
  * :doc:`/scripts/csvjson` no longer emits a property if its value is null.
  * :doc:`/scripts/csvjson` adds :code:`--type` and :code:`--geometry` options to emit non-Point GeoJSON features.
  * :doc:`/scripts/csvjson` adds a :code:`--no-bbox` option to disable the calculation of a bounding box.
  * :doc:`/scripts/csvjson` supports :code:`--stream` for newline-delimited GeoJSON.
  * :doc:`/scripts/csvsql` adds a :code:`--unique-constraint` option to list names of columns to include in a UNIQUE constraint.
  * :doc:`/scripts/csvsql` adds :code:`--before-insert` and :code:`--after-insert` options to run commands before and after the INSERT command.
  * :doc:`/scripts/csvpy` reports an error message if input is provided via STDIN.
  * :doc:`/scripts/in2csv` adds a :code:`--encoding-xls` option to specify the encoding of the input XLS file.
  * :doc:`/scripts/in2csv` supports :code:`--no-header-row` on XLS and XLSX files.
  * Suppress agate warning about column names not specified when using :code:`--no-header-row`.
  * Prompt the user if additional input is expected (i.e. if no input file or piped data is provided).
  * Update to `agate-excel 0.2.2 <http://agate-excel.readthedocs.io/en/0.2.2/#changelog>`_, `agate-sql 0.5.3 <http://agate-sql.readthedocs.io/en/0.5.3/#changelog>`_.
  + Fixes:
  * :doc:`/scripts/csvgrep` accepts utf-8 arguments to the :code:`--match` and :code:`--regex` options in Python 2.
  * :doc:`/scripts/csvjson` streams input and output only if :code:`--snifflimit` is :code:`0`.
  * :doc:`/scripts/csvsql` sets a DECIMAL's precision and scale and a VARCHAR's length to avoid dialect-specific errors.
  * :doc:`/scripts/csvstack` no longer opens all files at once.
  * :doc:`/scripts/in2csv` respects :code:`--no-header-row` when :code:`--no-inference` is set.
  * :doc:`/scripts/in2csv` CSV-to-CSV conversion streams input and output only if :code:`--snifflimit` is :code:`0`.
  * :doc:`/scripts/in2csv` supports GeoJSON files with: ``geometry`` set to ``null``, missing Point ``coordinates``, altitude coordinate values.
  + csvkit is no longer tested on PyPy.
- Update to 1.0.2
  + Improvements:
  * Add a :code:`--version` flag.
  * Add a :code:`--skip-lines` option to skip initial lines (e.g. comments, copyright notices, empty rows).
  * Add a :code:`--locale` option to set the locale of any formatted numbers.
  * Add a :code:`--date-format` option to set a strptime date format string.
  * Add a :code:`--datetime-format` option to set a strptime datetime format string.
  * Make :code:`--blanks` a common argument across all tools.
  * :code:`-I` is the short option for :code:`--no-inference`.
  * :doc:`/scripts/csvclean`, :doc:`/scripts/csvformat`, :doc:`/scripts/csvjson`, :doc:`/scripts/csvpy` support :code:`--no-header-row`.
  * :doc:`/scripts/csvclean` is faster and no longer requires exponential time in the worst case.
  * :doc:`/scripts/csvformat` supports :code:`--linenumbers` and `--zero` (no-op).
  * :doc:`/scripts/csvjoin` supports :code:`--snifflimit` and :code:`--no-inference`.
  * :doc:`/scripts/csvpy` supports :code:`--linenumbers` (no-op) and :code:`--zero` (no-op).
  * :doc:`/scripts/csvsql` adds a :code:`--prefix` option to add expressions like OR IGNORE or OR REPLACE following the INSERT keyword.
  * :doc:`/scripts/csvsql` adds a :code:`--overwrite` flag to drop any existing table with the same name before creating.
  * :doc:`/scripts/csvsql` accepts a file name for the :code:`--query` option.
  * :doc:`/scripts/csvsql` supports :code:`--linenumbers` (no-op).
  * :doc:`/scripts/csvsql` adds a :code:`--create-if-not-exists` flag to not abort if the table already exists.
  * :doc:`/scripts/csvstat` adds a :code:`--freq-count` option to set the maximum number of frequent values to display.
  * :doc:`/scripts/csvstat` supports :code:`--linenumbers` (no-op).
  * :doc:`/scripts/in2csv` adds a :code:`--names` flag to print Excel sheet names.
  * :doc:`/scripts/in2csv` adds a :code:`--write-sheets` option to write the named Excel sheets to files.
  * :doc:`/scripts/sql2csv` adds an :code:`--encoding` option to specify the encoding of the input query file.
  + Fixes:
  * :doc:`/scripts/csvgrep` no longer ignores common arguments if :code:`--linenumbers` is set.
  * :doc:`/scripts/csvjson` supports Decimal.
  * :doc:`/scripts/csvpy` again supports IPython.
  * :doc:`/scripts/csvsql` restores support for :code:`--no-constraints` and :code:`--db-schema`.
  * :doc:`/scripts/csvstat` will no longer crash when :code:`--freq` is set.
  * :doc:`/scripts/in2csv` restores support for :code:`--no-inference` for Excel files.
  * :doc:`/scripts/in2csv` restores support for converting Excel files from standard input.
  * :doc:`/scripts/in2csv` accepts utf-8 arguments to the :code:`--sheet` option in Python 2.
- Update to 1.0.1
  * :doc:`/scripts/csvstat` will no longer crash when a :code:`Number` column has :code:`None` as a frequent value. (#738)
  * :doc:`/scripts/csvlook` docs now note that output tables are Markdown-compatible. (#734)
  * :doc:`/scripts/csvstat` now supports a :code:`--csv` flag for tabular output. (#584)
  * :doc:`/scripts/csvstat` output is now easier to read. (#714)
  * :doc:`/scripts/csvpy` now has a better description when using the :code:`--agate` flag. (#729)
  * Fix a Python 2.6 bug preventing :doc:`/scripts/csvjson` from parsing utf-8 files. (#732)
  * Update required version of unittest to latest. (#727)
- Update to 1.0.0
  + Backwards-incompatible changes:
  * :doc:`/scripts/csvjoin` now renames duplicate columns with integer suffixes to prevent collisions in output.
  * :doc:`/scripts/csvsql` now generates ``DateTime`` columns instead of ``Time`` columns.
  * :doc:`/scripts/csvsql` now generates ``Decimal`` columns instead of ``Integer``, ``BigInteger``, and ``Float`` columns.
  * :doc:`/scripts/csvsql` no longer generates max-length constraints for text columns.
  * The ``--doublequote`` long flag is gone, and the ``-b`` short flag is now an alias for ``--no-doublequote``.
  * When using the ``--columns`` or ``--not-columns`` options, you must not have spaces around the comma-separated values, unless the column names contain spaces.
  * When sorting, null values are now greater than other values instead of less than.
  * ``CSVKitReader``, ``CSVKitWriter``, ``CSVKitDictReader``, and ``CSVKitDictWriter`` have been removed. Use ``agate.csv.reader``, ``agate.csv.writer``, ``agate.csv.DictReader`` and ``agate.csv.DictWriter``.
  * Dropped support for older versions of PyPy.
  * Dropped Python 2.6 support.
  * If ``--no-header-row`` is set, the output will have column names ``a``, ``b``, ``c``, etc. instead of ``column1``, ``column2``, ``column3``, etc.
  * csvlook renders a simpler, markdown-compatible table.
  + Improvements:
  * csvkit is now tested against Python 3.6. (#702)
  * ``import csvkit as csv`` will now defer to agate readers/writers.
  * :doc:`/scripts/csvgrep` supports ``--no-header-row``.
  * :doc:`/scripts/csvjoin` supports ``--no-header-row``.
  * :doc:`/scripts/csvjson` streams input and output if the ``--stream`` and ``--no-inference`` flags are set.
  * :doc:`/scripts/csvjson` supports ``--snifflimit`` and ``--no-inference``.
  * :doc:`/scripts/csvlook` adds ``--max-rows``, ``--max-columns`` and ``--max-column-width`` options.
  * :doc:`/scripts/csvlook` supports ``--snifflimit`` and ``--no-inference``.
  * :doc:`/scripts/csvpy` supports ``--agate`` to read a CSV file into an agate table.
  * ``csvsql`` supports custom `SQLAlchemy dialects <http://docs.sqlalchemy.org/en/latest/dialects/>`_.
  * :doc:`/scripts/csvstat` supports ``--names``.
  * :doc:`/scripts/in2csv` CSV-to-CSV conversion streams input and output if the ``--no-inference`` flag is set.
  * :doc:`/scripts/in2csv` CSV-to-CSV conversion uses ``agate.Table``.
  * :doc:`/scripts/in2csv` GeoJSON conversion adds columns for geometry type, longitude and latitude.
  * Documentation: Update tool usage, remove shell prompts, document connection string, correct typos.
  + Fixes:
  * Fixed numerous instances of open files not being closed before utilities exit.
  * Change ``-b``, ``--doublequote`` to ``--no-doublequote``, as doublequote is True by default.
  * :doc:`/scripts/in2csv` DBF conversion works with Python 3.
  * :doc:`/scripts/in2csv` correctly guesses format when file has an uppercase extension.
  * :doc:`/scripts/in2csv` correctly interprets ``--no-inference``.
  * :doc:`/scripts/in2csv` again supports nested JSON objects (fixes regression).
  * :doc:`/scripts/in2csv` with ``--format geojson`` will print a JSON object instead of ``OrderedDict([(...)])``.
  * :doc:`/scripts/csvclean` with standard input works on Windows.
  * :doc:`/scripts/csvgrep` returns the input file's line numbers if the ``--linenumbers`` flag is set.
  * :doc:`/scripts/csvgrep` can match multiline values.
  * :doc:`/scripts/csvgrep` correctly operates on ragged rows.
  * :doc:`/scripts/csvsql` correctly escapes ``%``` characters in SQL queries.
  * :doc:`/scripts/csvsql` adds standard input only if explicitly requested.
  * :doc:`/scripts/csvstack` supports stacking a single file.
  * :doc:`/scripts/csvstat` always reports frequencies.
  * The ``any_match`` argument of ``FilteringCSVReader`` now works correctly.
  * All tools handle empty files without error.

- Packaging : move to python singlespec
  + application are only py3 (no more alternatives)
  + fix copyright year
  + disable require on sphinx we don't have doc in pypi tar
  + use files.pythonhosted.org
  + remove shebang
  + adjust too strict version with sed in setup.py
- This update prepare the changes in version >1 with agathe

- Require python-python-dateutil. package was renamed

- Update to version 0.9.1:
  + Typo correction.
  + updated Kansas example data URL
  + Fix csvsort -c help text. Closes #373.
  + Add Dave Stanton to AUTHORS.
  + Fix typo. Closes #378.
  + Fix openpyxl version to work around bug. Closes #391.
    Rev down to 0.9.1 for imminent release.
  + Rev to 0.9.2 for dev.
  + in2csv: Support uppercase file extensions when guessing format.
- Packaging:
  + spec-cleaner
  + packaging with update-alternatives support for python3
    package
  + Added python-dbf and python-et_xmlfile as dependences
  + Add BuildRoot for fixing SLE_11 builds

- update to version 0.9.0:
  * Write missing sections of the tutorial. (#32)
  * Remove -q arg from sql2csv (conflicts with common flag).
  * Fix csvjoin in case where left dataset rows without all columns.
  * Rewrote tutorial based on LESO data. (#324)
  * Don't error in csvjson if lat/lon columns are null. (#326)
  * Maintain field order in output of csvjson.
  * Add unit test for json in2csv. (#77)
  * Maintain key order when converting JSON into CSV. (#325.)
  * Upgrade python-dateutil to version 2.2 (#304)
  * Fix sorting of columns with null values. (#302)
  * Added release documentation.
  * Fill out short rows with null values. (#313)
  * Fix unicode output for csvlook and csvstat. (#315)
  * Add documentation for --zero. (#323)
  * Fix Integrity error when inserting zero rows in database with
    csvsql. (#299)
  * Add --count option to CSVStat.
  * Implement csvformat.
  * Fix bug causing CSVKitDictWriter to output 'utf-8' for blank
    fields.
- additional changes from 0.8.0:
  * Fix column specification in csvstat. (#236)
  * Added "Tips and Tricks" documentation. (#297, #298)
  * Remove unnecessary enumerate calls. (#292)
  * Deprecated DBF support for Python 3+.
  * Add support for Python 3.3 and 3.4 (#239)
- additional changes from 0.7.3
  * Fix date handling with openpyxl > 2.0 (#285)
  * Support SQL queries "directly" on CSV files. (#276)
  * Fix off-by-one error in open ended column ranges. (#238)
  * Add line numbers flag to csvlook (#244)
  * Only install argparse for Python < 2.7. (#224)
  * Fix DBF dependency. (#270)
- additional changes from 0.7.2
  * Fix CHANGELOG for release.
- additional changes from 0.7.1
  * Fix homepage url in setup.py.
- additional changes from 0.7.0
  * Fix XLSX datetime normalization bug. (#223)
  * Merged sql2csv utility (#259).
  * Validate csvsql DB connections before parsing CSVs. (#257)
  * Clarify install process for Ubuntu. (#249)
  * Clarify docs for --escapechar. (#242)
  * Make ``import csvkit`` API compatible with ``import csv``.
  * Update Travis CI link. (#258)
  * Use case-sensitive name for SQLAlchemy (#237)
- update URL
- add python-six as dependency
- rework the removal of shebangs to make it more generic
- add sql2csv to the package file

- Update to version 0.6.1
  + No changelog available

- Update to version 0.5.0

- Update to version 0.3.0

- Update to version 0.2.5:
  * Use proper tarball
- Regenerated with py2pack:
  * Proper version checks around fdupes
  * Simpler Buildrequires
  * Fixed several rpmlint issues (non-excutable scripts, summary)

- initial package version 0.2.4 git 3f0d6c2