* Sat Dec 30 2023 Dirk Müller <dmueller@suse.com>
- update to 4.97.1 (bsc#1218387, CVE-2023-51766):
* Fixes for the smtp protocol smuggling (CVE-2023-51766)
- patch-cve-2022-3559, patch-CVE-2023-42115-CVE-2023-42116-CVE-2023-42114.patch,
patch-CVE-2023-42117.patch,patch-CVE-2023-42119.patch: upstream
* Mon Jun 27 2022 Peter Wullinger <wullinger@rz.uni-kiel.de>
- update to exim 4.96
* Move from using the pcre library to pcre2.
* Constification work in the filters module required a major version
bump for the local-scan API. Specifically, the "headers_charset"
global which is visible via the API is now const and may therefore
not be modified by local-scan code.
* Bug 2819: speed up command-line messages being read in. Previously a
time check was being done for every character; replace that with one
per buffer.
* Bug 2815: Fix ALPN sent by server under OpenSSL. Previously the string
sent was prefixed with a length byte.
* Change the SMTP feature name for pipelining connect to be compliant with
RFC 5321. Previously Dovecot (at least) would log errors during
submission.
* Fix macro-definition during "-be" expansion testing. The move to
write-protected store for macros had not accounted for these runtime
additions; fix by removing this protection for "-be" mode.
* Convert all uses of select() to poll().
* Fix use of $sender_host_name in daemon process. When used in certain
main-section options or in a connect ACL, the value from the first ever
connection was never replaced for subsequent connections.
* Bug 2838: Fix for i32lp64 hard-align platforms
* Bug 2845: Fix handling of tls_require_ciphers for OpenSSL when a value
with underbars is given.
* Bug 1895: TLS: Deprecate RFC 5114 Diffie-Hellman parameters.
* Debugging initiated by an ACL control now continues through into routing
and transport processes.
* The "expand" debug selector now gives more detail, specifically on the
result of expansion operators and items.
* Bug 2751: Fix include_directory in redirect routers. Previously a
bad comparison between the option value and the name of the file to
be included was done, and a mismatch was wrongly identified.
* Support for Berkeley DB versions 1 and 2 is withdrawn.
* When built with NDBM for hints DB's check for nonexistence of a name
supplied as the db file-pair basename.
* Remove the "allow_insecure_tainted_data" main config option and the
"taint" log_selector.
* Fix static address-list lookups to properly return the matched item.
Previously only the domain part was returned.
* The ${run} expansion item now expands its command string elements after
splitting. Previously it was before; the new ordering makes handling
zero-length arguments simpler.
* Taint-check exec arguments for transport-initiated external processes.
Previously, tainted values could be used. This affects "pipe", "lmtp" and
"queryprogram" transport, transport-filter, and ETRN commands.
The ${run} expansion is also affected: in "preexpand" mode no part of
the command line may be tainted, in default mode the executable name
may not be tainted.
* Fix CHUNKING on a continued-transport. Previously the usabilility of
the facility was not passed across execs, and only the first message
passed over a connection could use BDAT; any further ones using DATA.
* Support the PIPECONNECT facility in the smtp transport when the helo_data
uses $sending_ip_address and an interface is specified.
* OpenSSL: fix transport-required OCSP stapling verification under session
resumption.
* TLS resumption: the key for session lookup in the client now includes
more info that a server could potentially use in configuring a TLS
session, avoiding oferring mismatching sessions to such a server.
* Fix string_copyn() for limit greater than actual string length.
* Bug 2886: GnuTLS: Do not free the cached creds on transport connection
close; it may be needed for a subsequent connection.
* Fix CHUNKING for a second message on a connection when the first was
rejected.
* Fix ${srs_encode ...} to handle an empty sender address, now returning
an empty address.
* Bug 2855: Handle a v4mapped sender address given us by a frontending
proxy.
* Wed Sep 29 2021 Peter Wullinger <wullinger@rz.uni-kiel.de>
- update to exim 4.95
* includes taintwarn (taintwarn.patch)
* fast-ramp queue run
* native SRS
* TLS resumption
* LMDB lookups with single key
* smtp transport option "message_linelength_limit"
* optionally ignore lookup caches
* quota checking for appendfile transport during message reception
* sqlite lookups allow a "file=<path>" option
* lsearch lookups allow a "ret=full" option
* command line option for the notifier socket
* faster TLS startup
* new main config option "proxy_protocol_timeout"
* expand "smtp_accept_max_per_connection"
* log selector "queue_size_exclusive"
* main config option "smtp_backlog_monitor"
* main config option "hosts_require_helo"
* main config option "allow_insecure_tainted_data"
Version: 4.94.2-2.1
* Tue May 04 2021 wullinger@rz.uni-kiel.de
- update to exim-4.94.2
security update (bsc#1185631)
* CVE-2020-28007: Link attack in Exim's log directory
* CVE-2020-28008: Assorted attacks in Exim's spool directory
* CVE-2020-28014: Arbitrary PID file creation
* CVE-2020-28011: Heap buffer overflow in queue_run()
* CVE-2020-28010: Heap out-of-bounds write in main()
* CVE-2020-28013: Heap buffer overflow in parse_fix_phrase()
* CVE-2020-28016: Heap out-of-bounds write in parse_fix_phrase()
* CVE-2020-28015: New-line injection into spool header file (local)
* CVE-2020-28012: Missing close-on-exec flag for privileged pipe
* CVE-2020-28009: Integer overflow in get_stdinput()
* CVE-2020-28017: Integer overflow in receive_add_recipient()
* CVE-2020-28020: Integer overflow in receive_msg()
* CVE-2020-28023: Out-of-bounds read in smtp_setup_msg()
* CVE-2020-28021: New-line injection into spool header file (remote)
* CVE-2020-28022: Heap out-of-bounds read and write in extract_option()
* CVE-2020-28026: Line truncation and injection in spool_read_header()
* CVE-2020-28019: Failure to reset function pointer after BDAT error
* CVE-2020-28024: Heap buffer underflow in smtp_ungetc()
* CVE-2020-28018: Use-after-free in tls-openssl.c
* CVE-2020-28025: Heap out-of-bounds read in pdkim_finish_bodyhash()
* Wed Apr 28 2021 wullinger@rz.uni-kiel.de
- update to exim-4.94.1
* Fix security issue in BDAT state confusion.
Ensure we reset known-good where we know we need to not be reading BDAT
data, as a general case fix, and move the places where we switch to BDAT
mode until after various protocol state checks.
Fixes CVE-2020-BDATA reported by Qualys.
* Fix security issue in SMTP verb option parsing (CVE-2020-EXOPT)
* Fix security issue with too many recipients on a message (to remove a
known security problem if someone does set recipients_max to unlimited,
or if local additions add to the recipient list).
Fixes CVE-2020-RCPTL reported by Qualys.
* Fix CVE-2020-28016 (PFPZA): Heap out-of-bounds write in parse_fix_phrase()
* Fix security issue CVE-2020-PFPSN and guard against cmdline invoker
providing a particularly obnoxious sender full name.
* Fix Linux security issue CVE-2020-SLCWD and guard against PATH_MAX
better.
* Mon Aug 24 2020 wullinger@rz.uni-kiel.de
- bring back missing exim_db.8 manual page
(fixes bsc#1173693)
* Mon Jun 08 2020 wullinger@rz.uni-kiel.de
- bring in changes from current +fixes (lots of taint check fixes)
* Bug 1329: Fix format of Maildir-format filenames to match other mail-
related applications. Previously an "H" was used where available info
says that "M" should be, so change to match.
* Bug 2587: Fix pam expansion condition. Tainted values are commonly used
as arguments, so an implementation trying to copy these into a local
buffer was taking a taint-enforcement trap. Fix by using dynamically
created buffers.
* Bug 2586: Fix listcount expansion operator. Using tainted arguments is
reasonable, eg. to count headers. Fix by using dynamically created
buffers rather than a local. Do similar fixes for ACL actions "dcc",
"log_reject_target", "malware" and "spam"; the arguments are expanded
so could be handling tainted values.
* Bug 2590: Fix -bi (newaliases). A previous code rearrangement had
broken the (no-op) support for this sendmail command. Restore it
to doing nothing, silently, and returning good status.
* Tue Jun 02 2020 wullinger@rz.uni-kiel.de
- update to exim 4.94
* some transports now refuse to use tainted data in constructing their delivery
location
this WILL BREAK configurations which are not updated accordingly.
In particular: any Transport use of $local_user which has been relying upon
check_local_user far away in the Router to make it safe, should be updated to
replace $local_user with $local_part_data.
* Attempting to remove, in router or transport, a header name that ends with
an asterisk (which is a standards-legal name) will now result in all headers
named starting with the string before the asterisk being removed.
* Tue May 19 2020 wullinger@rz.uni-kiel.de
- switch pretrans to use lua
(fixes bsc#1171877)
* Tue May 12 2020 wullinger@rz.uni-kiel.de
- bring changes from current in +fixes branch
(patch-exim-fixes-ee83de04d3087efaf808d1f2235a988275c2ee94)
* fixes CVE-2020-12783 (bsc#1171490)
* Regard command-line recipients as tainted.
* Bug 2489: Fix crash in the "pam" expansion condition.
* Use tainted buffers for the transport smtp context.
* Bug 2493: Harden ARC verify against Outlook, which has been seen to mix
the ordering of its ARC headers. This caused a crash.
* Bug 2492: Use tainted memory for retry record when needed. Previously when
a new record was being constructed with information from the peer, a trap
was taken.
* Bug 2494: Unset the default for dmarc_tld_file.
* Fix an uninitialised flag in early-pipelining. Previously connections
could, depending on the platform, hang at the STARTTLS response.
* Bug 2498: Reset a counter used for ARC verify before handling another
message on a connection. Previously if one message had ARC headers and
the following one did not, a crash could result when adding an
Authentication-Results: header.
* Bug 2500: Rewind some of the common-coding in string handling between the
Exim main code and Exim-related utities.
* Fix the variables set by the gsasl authenticator.
* Bug 2507: Modules: on handling a dynamic-module (lookups) open failure,
only retrieve the errormessage once.
* Bug 2501: Fix init call in the heimdal authenticator. Previously it
adjusted the size of a major service buffer; this failed because the
buffer was in use at the time. Change to a compile-time increase in the
buffer size, when this authenticator is compiled into exim.
* Wed Apr 01 2020 wullinger@rz.uni-kiel.de
- don't create logfiles during install
* fixes CVE-2020-8015 (bsc#1154183)
* Mon Jan 13 2020 wullinger@rz.uni-kiel.de
- add a spec-file workaround for bsc#1160726
* Tue Jan 07 2020 wullinger@rz.uni-kiel.de
- update to exim 4.93.0.4 (+fixes release)
* Avoid costly startup code when not strictly needed. This reduces time
for some exim process initialisations. It does mean that the logging
of TLS configuration problems is only done for the daemon startup.
* Early-pipelining support code is now included unless disabled in Makefile.
* DKIM verification defaults no long accept sha1 hashes, to conform to
RFC 8301. They can still be enabled, using the dkim_verify_hashes main
option.
* Support CHUNKING from an smtp transport using a transport_filter, when
DKIM signing is being done. Previously a transport_filter would always
disable CHUNKING, falling back to traditional DATA.
* Regard command-line receipients as tainted.
* Bug 340: Remove the daemon pid file on exit, whe due to SIGTERM.
* Bug 2489: Fix crash in the "pam" expansion condition. It seems that the
PAM library frees one of the arguments given to it, despite the
documentation. Therefore a plain malloc must be used.
* Bug 2491: Use tainted buffers for the transport smtp context. Previously
on-stack buffers were used, resulting in a taint trap when DSN information
copied from a received message was written into the buffer.
* Bug 2493: Harden ARC verify against Outlook, whick has been seen to mix
the ordering of its ARC headers. This caused a crash.
* Bug 2492: Use tainted memory for retry record when needed. Previously when
a new record was being constructed with information from the peer, a trap
was taken.
* Bug 2494: Unset the default for dmarc_tld_file. Previously a naiive
installation would get error messages from DMARC verify, when it hit the
nonexistent file indicated by the default. Distros wanting DMARC enabled
should both provide the file and set the option.
Also enforce no DMARC verification for command-line sourced messages.
* Fix an uninitialised flag in early-pipelining. Previously connections
could, depending on the platform, hang at the STARTTLS response.
* Bug 2498: Reset a counter used for ARC verify before handling another
message on a connection. Previously if one message had ARC headers and
the following one did not, a crash could result when adding an
Authentication-Results: header.
* Bug 2500: Rewind some of the common-coding in string handling between the
Exim main code and Exim-related utities. The introduction of taint
tracking also did many adjustments to string handling. Since then, eximon
frequently terminated with an assert failure.
* When PIPELINING, synch after every hundred or so RCPT commands sent and
check for 452 responses. This slightly helps the inefficieny of doing
a large alias-expansion into a recipient-limited target. The max_rcpt
transport option still applies (and at the current default, will override
the new feature). The check is done for either cause of synch, and forces
a fast-retry of all 452'd recipients using a new MAIL FROM on the same
connection. The new facility is not tunable at this time.
* Fix the variables set by the gsasl authenticator. Previously a pointer to
library live data was being used, so the results became garbage. Make
copies while it is still usable.
* Logging: when the deliver_time selector ise set, include the DT= field
on delivery deferred (==) and failed (**) lines (if a delivery was
attemtped). Previously it was only on completion (=>) lines.
* Authentication: the gsasl driver not provides the $authN variables in time
for the expansion of the server_scram_iter and server_scram_salt options.
* Thu Jan 02 2020 wullinger@rz.uni-kiel.de
spec file cleanup to make update work
- add docdir to spec
* Mon Dec 09 2019 wullinger@rz.uni-kiel.de
- update to exim 4.93
* SUPPORT_DMARC replaces EXPERIMENTAL_DMARC
* DISABLE_TLS replaces SUPPORT_TLS
* Bump the version for the local_scan API.
* smtp transport option hosts_try_fastopen defaults to "*".
* DNSSec is requested (not required) for all queries. (This seemes to
ask for trouble if your resolver is a systemd-resolved.)
* Generic router option retry_use_local_part defaults to "true" under specific
pre-conditions.
* Introduce a tainting mechanism for values read from untrusted sources.
* Use longer file names for temporary spool files (this avoids
name conflicts with spool on a shared file system).
* Use dsn_from main config option (was ignored previously).
* Mon Sep 30 2019 poeml@cmdline.net
- update to exim 4.92.3
* CVE-2019-16928: fix against Heap-based buffer overflow in string_vformat,
remote code execution seems to be possible
* Sat Sep 07 2019 poeml@cmdline.net
- update to exim 4.92.2
* CVE-2019-15846: fix against remote attackers executing arbitrary code as
root via a trailing backslash
* Thu Jul 25 2019 atoptsoglou@suse.com
- update to exim 4.92.1
* CVE-2019-13917: Fixed an issue with ${sort} expansion which could
allow remote attackers to execute other programs with root privileges
(boo#1142207)
* Wed Jun 05 2019 wullinger@rz.uni-kiel.de
- spec file cleanup
* fix DANE inclusion guard condition
* re-enable i18n and remove misleading comment
* EXPERIMENTAL_SPF is now SUPPORT_SPF
* DANE is now SUPPORT_DANE
* Sat Mar 23 2019 seanlew@opensuse.org
- update to exim 4.92
* ${l_header:<name>} expansion
* ${readsocket} now supports TLS
* "utf8_downconvert" option (if built with SUPPORT_I18N)
* "pipelining" log_selector
* JSON variants for ${extract } expansion
* "noutf8" debug option
* TCP Fast Open support on MacOS
* CVE-2019-10149: Fixed a Remote Command Execution (bsc#1136587)
- add workaround patch for compile time error on missing printf
format annotation (gnu_printf.patch)
* Mon Apr 16 2018 wullinger@rz.uni-kiel.de
- update to 4.91
* DEFER rather than ERROR on redis cluster MOVED response.
* Catch and remove uninitialized value warning in exiqsumm
* Disallow '/' characters in queue names specified for the "queue=" ACL
modifier. This matches the restriction on the commandline.
* Fix pgsql lookup for multiple result-tuples with a single column.
Previously only the last row was returned.
* Bug 2217: Tighten up the parsing of DKIM signature headers.
* Bug 2215: Fix crash associated with dnsdb lookup done from DKIM ACL.
* Fix issue with continued-connections when the DNS shifts unreliably.
* Bug 2214: Fix SMTP responses resulting from non-accept result of MIME ACL.
* The "support for" informational output now, which built with Content
Scanning support, has a line for the malware scanner interfaces compiled
in. Interface can be individually included or not at build time.
* The "aveserver", "kavdaemon" and "mksd" interfaces are now not included
by the template makefile "src/EDITME". The "STREAM" support for an older
ClamAV interface method is removed.
* Bug 2223: Fix mysql lookup returns for the no-data case (when the number of
rows affected is given instead).
* The runtime Berkeley DB library version is now additionally output by
"exim -d -bV". Previously only the compile-time version was shown.
* Bug 2230: Fix cutthrough routing for nonfirst messages in an initiating
SMTP connection.
* Bug 2229: Fix cutthrough routing for nonstandard port numbers defined by
routers.
* Bug 2174: A timeout on connect for a callout was also erroneously seen as
a timeout on read on a GnuTLS initiating connection, resulting in the
initiating connection being dropped.
* Relax results from ACL control request to enable cutthrough, in
unsupported situations, from error to silently (except under debug)
ignoring.
* Fix Buffer overflow in base64d() (CVE-2018-6789)
* Fix bug in DKIM verify: a buffer overflow could corrupt the malloc
metadata, resulting in a crash in free().
* Fix broken Heimdal GSSAPI authenticator integration.
* Bug 2113: Fix conversation closedown with the Avast malware scanner.
* Bug 2239: Enforce non-usability of control=utf8_downconvert in the mail ACL.
* Speed up macro lookups during configuration file read, by skipping non-
macro text after a replacement (previously it was only once per line) and
by skipping builtin macros when searching for an uppercase lead character.
* DANE support moved from Experimental to mainline. The Makefile control
for the build is renamed.
* Fix memory leak during multi-message connections using STARTTLS.
* Bug 2236: When a DKIM verification result is overridden by ACL, DMARC
reported the original. Fix to report (as far as possible) the ACL
result replacing the original.
* Fix memory leak during multi-message connections using STARTTLS under
OpenSSL
* Bug 2242: Fix exim_dbmbuild to permit directoryless filenames.
* Fix utf8_downconvert propagation through a redirect router.
* Bug 2253: For logging delivery lines under PRDR, append the overall
DATA response info to the (existing) per-recipient response info for
the "C=" log element.
* Bug 2251: Fix ldap lookups that return a single attribute having zero-
length value.
* Support Avast multiline protocol, this allows passing flags to
newer versions of the scanner.
* Ensure that variables possibly set during message acceptance are marked
dead before release of memory in the daemon loop.
* Bug 2250: Fix a longstanding bug in heavily-pipelined SMTP input (such
as a multi-recipient message from a mailinglist manager).
* The (EXPERIMENTAL_DMARC) variable $dmarc_ar_header is withdrawn, being
replaced by the ${authresults } expansion.
* Bug 2257: Fix pipe transport to not use a socket-only syscall.
* Set a handler for SIGTERM and call exit(3) if running as PID 1. This
allows proper process termination in container environments.
* Bug 2258: Fix spool_wireformat in combination with LMTP transport.
Previously the "final dot" had a newline after it; ensure it is CR,LF.
* SPF: remove support for the "spf" ACL condition outcome values "err_temp"
and "err_perm", deprecated since 4.83 when the RFC-defined words
" temperror" and "permerror" were introduced.
* Re-introduce enforcement of no cutthrough delivery on transports having
transport-filters or DKIM-signing.
* Cutthrough: for a final-dot response timeout (and nonunderstood responses)
in defer=pass mode supply a 450 to the initiator. Previously the message
would be spooled.
* DANE: add dane_require_tls_ciphers SMTP Transport option; if unset,
tls_require_ciphers is used as before.
* Malware Avast: Better match the Avast multiline protocol.
* Fix reinitialisation of DKIM logging variable between messages.
* Bug 2255: Revert the disable of the OpenSSL session caching.
* Add util/renew-opendmarc-tlds.sh script for safe renewal of public
suffix list.
* DKIM: accept Ed25519 pubkeys in SubjectPublicKeyInfo-wrapped form,
since the IETF WG has not yet settled on that versus the original
"bare" representation.
* Fix syslog logging for syslog_timestamp=no and log_selector +millisec.
Previously the millisecond value corrupted the output.
Fix also for syslog_pid=no and log_selector +pid, for which the pid
corrupted the output.
* Thu Mar 15 2018 crrodriguez@opensuse.org
- Replace xorg-x11-devel by individual pkgconfig() buildrequires.
* Tue Feb 13 2018 kbabioch@suse.com
- update to 4.90.1
* Allow PKG_CONFIG_PATH to be set in Local/Makefile and use it correctly
during configuration. Wildcards are allowed and expanded.
* Shorten the log line for daemon startup by collapsing adjacent sets of
identical IP addresses on different listening ports. Will also affect
"exiwhat" output.
* Tighten up the checking in isip4 (et al): dotted-quad components larger
than 255 are no longer allowed.
* Default openssl_options to include +no_ticket, to reduce load on peers.
Disable the session-cache too, which might reduce our load. Since we
currrectly use a new context for every connection, both as server and
client, there is no benefit for these.
* Add $SOURCE_DATE_EPOCH support for reproducible builds, per spec at
<https://reproducible-builds.org/specs/source-date-epoch/>.
* Fix smtp transport use of limited max_rcpt under mua_wrapper. Previously
the check for any unsuccessful recipients did not notice the limit, and
erroneously found still-pending ones.
* Pipeline CHUNKING command and data together, on kernels that support
MSG_MORE. Only in-clear (not on TLS connections).
* Avoid using a temporary file during transport using dkim. Unless a
transport-filter is involved we can buffer the headers in memory for
creating the signature, and read the spool data file once for the
signature and again for transmission.
* Enable use of sendfile in Linux builds as default. It was disabled in
4.77 as the kernel support then wasn't solid, having issues in 64bit
mode. Now, it's been long enough. Add support for FreeBSD also.
* Add commandline_checks_require_admin option.
* Do pipelining under TLS.
* For the "sock" variant of the malware scanner interface, accept an empty
cmdline element to get the documented default one. Previously it was
inaccessible.
* Prevent repeated use of -p/-oMr
* DKIM: enforce the DNS pubkey record "h" permitted-hashes optional field,
if present.
* DKIM: when a message has multiple signatures matching an identity given
in dkim_verify_signers, run the dkim acl once for each.
* Support IDNA2008.
* The path option on a pipe transport is now expanded before use
* Have the EHLO response advertise VRFY, if there is a vrfy ACL defined.
- Several bug fixes
- Fix for buffer overflow in base64decode() (bsc#1079832 CVE-2018-6789)
- removed patches (included upstream now):
* exim-CVE-2017-1000369.patch
* exim-CVE-2017-16943.patch
* exim-CVE-2017-16944.patch
* exim-4.86.2-mariadb_102_compile_fix.patch