urh-2.9.4-bp155.1.6

- Update to version 2.9.4
  * 'Remove Carrier' encoding truncates initial input.
  * Add I/Q view.
  * Refresh protocol view also when hidden.
  * Adding Save As pcapng for ProtocolAnalyzer.
  * Keep Y-Scale when showing/hiding demodulated view.
  * Fix .sub file RAW_data strip.
  * Add rad1o support.
  * Fix error when selecting large ranges in Interpretation.
  * Allow configuration of fractional font sizes.
- Drop urh-rpmlintrc

- Update to version 2.9.3
  * add bias tee check box on device settings.
  * add category HamRadio to desktop file.
  * Signal: retain the sample_rate on create_new.
  * Simulation fix: use sending device dtype for modulation.
  * Variable type mismatch.
  * remove HackRF anti-freeze timeouts in places that do not
    require them.
  * add b before data string.
  * get magnitudes in cython for less memory consumption.
  * join simulation thread when simulation stopped.
  * add default noise threshold setting.
  * Fix cython warnings.
  * set BladeRF min sample rate to 520.834 kHz.
  * fix #933 improve y-scale in SendRecvDialog.

- Update to version 2.9.2
  * allow incomplete complex files to load fix #848
  * Use list for checksum data_ranges

- Update to version 2.9.1
  * use *.wav format for demodulated signal export.
  * change separation colors to green and magenta.
  * fix disappearing separation area in demod view.
  * fix overflow in AutoInterpretation for certain signals.

- Update to version 2.9.0
  * Avoid graph overlapping legend in spectrum analyzer.
  * Improve Auto Interpretation Performance.
  * Improve sdr check fix.
  * Use costas loop for PSK demod.
  * Consider checksum label in copy operation.

- Update to version 2.8.9
  * make HackRF bias tee configurable.
  * Fix deprecation warnings due to invalid escape sequences.
  * Use ElementTree instead of deprecated cElementTree.
  * Refactor FileOperator.
  * properly remember size and position of dialogs fix.
  * add De Bruijn fuzzing.
  * add support for already demodulated signals.
  * Remove NRZ-I to prevent mixing with NRZ + Invert, clarify names.

- Update to version 2.8.8
  * support for complex16u (2xuint8) signals.
  * Remove padding when drawing signals and remove autofit -> Weak
    captures are visible at a glance, use Y-Scale instead.

- Update to version 2.8.7
  * improve pyinstaller_helper.py
  * nicer output for device log in dialogs
  * enforce smaller headers -> more data visible in table views
  * update README.md
  * only close current project if new one requested
  * remove parallelization in ExtensionHelper.py [ #761 ]

- Update to version 2.8.6
  * remove superfluous os.join
  * Improve appicon_big
  * New logo and icon (#757)
  * fix attribute assignment
  * use more recent UHD version

- Update to version 2.8.5
  * Beautify LFSR implementation
  * Fix decoding UI
  * Overhaul GNU Radio backend (ready for gr 3.8)
  * improve waiting in unittests

- Update to version 2.8.4
  * fix message break plugin
  * Close old project only when new project acknowledged
  * build sequentially in pyinstaller_helper.py
  * UI: Updated capitalization of GNU Radio
  * make include path in rebuild configurable
  * make combobox for device selection editable

- Update to version 2.8.3
  * allow more granular values in spinboxes
  * Show if demodulation is in progress
  * add environment variables to set API version explicitly
  * centralize setting operations + rename constants.py->settings.py

- Update to version 2.8.2
  * Fix some typos
  * Ensure every message has a message type after awre
  * increase range for samples_per_symbol (fix #699)

- Update to version 2.8.1
  * fix PSK threshold in AInterpretation
  * remove randomness when equally common modulations found
  * improve performance of AInterpretation for long signals
  * update ranges for BladeRF
  * Update README.md

- Update to version 2.8.0
  * update filter dialog UI
  * fix crash when creating new project with compressed signal
    loaded
  * Add GUI for higher order modulations
  * Update PSK Demod routine to support higher order PSK

- Update to version 2.7.5
  * Fix bug in FSK modulation: remove spiky jumps
  * Add missing update when deleting bits
  * Add hidden import
  * make subdevice and antenna for usrp configurable
  * make analysis look better in lower resolutions

- Update to version 2.7.2
  * Show shortcuts in context menus if possible
  * Refactor demod backend
  * Add oqpsk modulation in backend
  * Fix crash when running spectrum dialog for long time
  * Improve usability of Decoding
  * Make modulation backend more generic
  * Several fixes

- Update to version 2.7.0
  * This release brings #652 which uses native IQ formats of SDRs.
    This improves performance and reduces RAM requirements when
    recording and sending with native backend.

- Update to version 2.6.0
  * This release greatly enhances the capabilities of automatic label
    and message type inference. Preamble, Synchronization, Address
    (SRC/DST), Sequence Number and Checksum labels are now assigned
    automatically when hitting the Analyze button.
  Further Changes:
  * More accurate logic analysis
  * Fix parameters of auto interpretation for better PSK detection
  * Fix appearance of message type edit button in dark themes
  * Fix error with message length divisor

- Update to version 2.5.7
  * Improve dialog construction to prevent error on KDE
  * Increase frequency range of PlutoSDR
  * Fix crash when showing diff of empty protocol
  * Create directory before to prevent error with multiprocessing

- Update to version 2.5.6
  * fix center detection crash on special signals

- Upstream changed license terms
  https://github.com/jopohl/urh/commit/2ce8174330fd14adfb5642affea6d3f4f1693213
  Correct license tag:
  * "Apache-2.0 AND GPL-2.0-only" -> "GPL-3.0-only"

- Update to version 2.5.5
  * refactor name filters
  * Add .cu8 .cs8 format alias
  * remove MAX_MESSAGE_SAMPLES threshold in auto interpretation
  * add user feedback if auto detection fails
  * improve max memory allocation on 32 bit
  * Make auto interpretation work in live mode during simulation

- Update to version 2.5.4
  * Test release only - no changes for users
- Update to version 2.5.3
  * fix crash when using spectrum analyzer with GNU Radio backend

- Update to version 2.5.2
  Bugfixes
  * prevent crash in substitution encoding
  * consider alignment offset when showing selected labels
  Adjustments
  * remove Save and Close of fuzzing dialog, as closing means
    saving here anyway
  New features
  * make application font size configurable in Options -> View

- Update to version 2.5.1
  * improve stability when capturing with SoundCard
  * stop simulation instantly after finishing

- Update to version 2.0.4
  * Improve external program behaviour in Simulator
  * Improve simulator useability
  * Improve transcript for external programs
  * make endianness selectable in order column
  * UI improvements
  * add support for soundcards as new SDR device
  * Multi device support
  * add support for 24bit wav

- Update to version 2.0.2
  * Improve external program behaviour in Simulator
  * Improve simulator useability
  * Improve transcript for external programs
  * Make endianness selectable in order column
  * UI improvements

- Update to version 2.0.1
  * Bugfix release

- Update to version 2.0.0
  * Add Simulator mode
  * Performance and stability improvements:
  - improve accuracy when sending messages with short pauses
  - improve accuracy of protocol sniffer
  - allow setting lower frequencies for HackRF (#396)
  - consider latest changes of LimeSuite API (#397)
  - add timestamp to protocol sniffer output (#392)
  - improve performance of modulations
  - improve performance of filtering in analysis
  - improve performance when starting sending
  - improve send accuracy of HackRF
  - improve performance when filtering messages in Analysis

- Update to version 1.9.2
  * Add BCD (Binary Coded Decimal) as new display format
  * Make bit order configurable in analysis view table
  * Improved loading of protocol files
- Package svg version of the app-icon

- Add more required runtime deps:
  * python3-pyzmq
  * python3-qt5

- Update to version 1.9.1
  * hotfix release that fixes an error with HackRF receiving

- Update to version 1.9.0
  * added native support for SDRplay
  * improved performance for continuous send mode
  * added collapsable comboboxes to device dialog

- Update to version 1.8.17
  * show warning at bottom if no project loaded
  * if no project is opened an new project is created, add
    currently opnened files to new project
  * add --version flag to command line script

- Update to version 1.8.16
  * This release fixes an issue on Windows where processes ended
    with an error.
  * The NetworkSDR can now be used in continuous send mode

- Update to version 1.8.15
  * This release fixes a problem mentioned in #366 and #368
    with GNU Radio backend on Windows.

- Update to version 1.8.14
  * This release fixes an overflow error (#364) when modulating
    very long messages in Generator.
  * The highlight of this release is an enhanced spectrum analyzer
    (#365) with increased performance and a waterfall plot to have
    a different, time based perspective on the spectrum.

- Update to version 1.8.13

- Update to version 1.8.12
  * added a CSV import wizard for generic support of USB oscilloscopes

- Update to version 1.8.11
  The following issues were fixed in this release:
  * crash when entering bits on empty position in Analysis/Generation
  * bandpass filter can now also work with negative frequencies
  * bandpass filter operations now run in a separate process and
    can be canceled with the ESC button
  * added a csv import to work with USB oscilloscopes
  * added a advanced modulation menu in Interpretation where a
    minimum message length for ASK can be configured

- Remove macros %desktop_database_post and %icon_theme_cache_post
  from %post and %postun section. These macros are not longer
  needed.

- Update summary.

- Update to version 1.8.10

- Initial package, version 1.8.8