plplot-5.15.0-bp156.7.3

- Disable python3.12 as it is not supported by upstream.
- Fix doc pakcage location.

- Add plplot-pkgconfig-includedir.patch: Use
  CMAKE_INSTALL_FULL_<dir> macros to fix incorrect include and lib
  dirs in pkgconfig file
  (https://sourceforge.net/p/plplot/bugs/207/).

- Adapt specfile to build plplot against multiple python flavours.
- Set $HOME to current dir during %check to ensure fontconfig does
  not complain about un-writable cache dirs.
- Add plplot-libharu-version-check.patch: Fix check for libharu
  version when configuring build with cmake.
- New subpackages:
  * plplot-driver-pdf: PDf driver based on libharu; new
    BuildRequires: libharu-devel.
  * plplot-pyqt5-cmake: CMake files for building cmake based
    projects using python3-plplot-pyqt5. CMake files are not
    versioned according to python3 versioning, and so can only
    help when using the pyqt5 bindings with the primary python3
    version. NOTE: Currently pkg is noop as pyqt5 bindings do not
    build for python 3.11, since sip4 is not available for the
    latter.
- Make doc package noarch.
- Have python310-plplot-pyqt5 obsolete plplot-python3-qt5.
- Have python311-plplot explicitly obsolete python3-plplot to
  avoid file conflicts during upgrades.
- Let python310-plplot = %{version}-%{release} conflict with
  python3-plplot < %{version}-%{release}.

- Disable octave also for TW (openSUSE >= 1550) since plplot does
  not support octave >= 8.0.

- BuildRequires python3-sip4 for Leap 15.4

- Enforce CMAKE_INSTALL_LIBDIR=%{_libdir} to ensure pkgconfig
  file substitutions for libdir are correct; this became an issue
  after we switched to using the cmake macro for configuring
  (boo#1195074).

- Change shebangs for Python examples to be Python 3.
- Add patch support-python3-pythondemos.patch so pythondemos.py will
  run under Python 3.

- Enable building octave bindings for openSUSE >= 1550 (TW) where
  swig has been patched to support octave 6+.

- Enforce std=c++14 to avoid build failures with GCC 11 that
  defaults to c++17.

- Reenable qhull support, link against reentrant libqhull_r:
  0001-Use-reentrant-libqhull_r-instead-of-deprecated-libqh.patch
- Some minor specfile cleanups

- Add plplot-drop-FindLua-cmake-module.patch to drop in-house
  FindLua.cmake module, which is severely dated, to use cmake's
  own module and fix building for lua >= 5.4; patch taken from
  upstream.

- Disable octave bindings until compilation against octave 6 is
  fixed (fix should happen mostly in swig, see gh#swig/swig#1893).

- Fix dependency of -devel package when built without qhull
  support: libcsironn0 does not exist in this case.

- Disable csironn library since it does not build against recent
  qhull (libqhull_r).
- Disable ada bindings: does not build with fPIC.
- BuildRequires: python3-sip4-devel for openSUSE >= 1550 to enable
  pyqt5 bindings.
- Pass `-DCMAKE_SKIP_RPATH:BOOL=OFF
  - DCMAKE_SKIP_INSTALL_RPATH:BOOL=ON` to cmake to fix build issues
  caused by Leap 15.2's incorrect cmake macros (doesn't hurt for
  other distros anyway).

- Disable octave bindings for openSUSE < 1550 where they fail to
  build.

- Add _constraints for PowerPC avoid "no space left on device" build error

- Add plplot-include-QPainterPath.patch: Include QPainterPath
  header when building Qt modules, needed for Qt >= 5.15.0; patch
  from upstream.
- Re-enable octave bindings (issue with swig and octave seems to
  be fixed now).
- Reorganise the distribution of cmake files so that each cmake
  file belongs in the right package.

- Re-enable csironn bindings for openSUSE >= 1550 as they build
  again (due to fixes to qhull package).

- add conditional for OCaml bindings, they depend on camlidl
- actually fix the OCaml bindings with plplot-ocaml.patch
- use autosetup, build verbose

- Do not require libcsironn0 from the -devel package on
  suse_version>=1550, where this is no longer built.

- plplotqt-devel no longer Requires libqt4-devel, instead the
  appropriate Qt5 headers.

- Disable libcsironn on openSUSE >= 1550 to prevent build
  failures.
- Fix shapelib dependency: BuildRequires: pkgconfig(shapelib)
  instead of BuildRequires: shapelib; install additional shapelib
  files as part of plplot-common.

- Add ExclusiveArch, based on build_ada in gcc.spec

- Update to version 5.15.0
  * Bug fixes
  * Update PLplot to be consistent with modern free software
  * Rewrite the configuration of the INSTALL_RPATH target
    property
  * Rewrite the rpath configuration of traditionally built
    examples
  * Factor the PLplot export files
  * Introduce symbolic constants in our color-map routines
  * New implementation of the range checks for the validity of
    cmap0 and cmap1 user input
  * New implementation of the -bg command-line option
  * Implement ctest for the build system of the installed
    examples

- Disable octave bindings until compilation against octave 5.1.x
  is supported.

- Update to version 5.14.0:
  * Update control of Python version
  * Rewrite the build-system logic for determining PYQT_SIP_DIR
    and PYQT_SIP_FLAGS
  * Implement plStatic2dGrid
  * Difference report default device changed from psc to svg
  * Resolve the remaining difference report issues
  * Improve command-line parsing
  * Cleanup of plmap
  * wxwidgets development status
  * First step toward using best CMake-3 practices for our build
    system
  * Update PLplot to be consistent with modern free software
  * Rewrite documentation of PLplot testing
  * Configure the ps and psttf device drivers just like all other
    device drivers
  * Bug fixes
- Drop plplot-fix-pkgconfig-checks.patch: upstreamed.
- Update shlib package names in keeping with upstream so versions.
- Enable octave bindings: compilation against 4.4.x has been fixed
  upstream.

- Add plplot-fix-pkgconfig-checks.patch: Fix pkg-config based
  checks for installed dependencies; patch taken from upstream
  git.

- Re-enable libcsirocsa and libscironn for i586: these are now
  building (go figure!)

- Disable octave bindings until compilation against octave 4.4 is
  sorted out; remove conditionals for setting octave_enabled as
  plplot is unresolvable against openSUSE < 1320 anyway.

- plplot-devel should not depend on shared libs which are not
  built: %{csirocsa_shlib} and %{csironn_shlib} on certain archs.

- Handle aarch64, ppc64 and ppc64le, not only x86_64 for libs

- Fix building for i586 by packaging x86_64-only libraries only
  for the latter arch.

- Remove python3-base from Requires for %{name}-tcltk; it is
  unneeded in light of python(abi) getting pulled in
  automatically.

- Replace even more python2 Requires with python3 ones; this
  finally fixes build failures on openSUSE:Leap:15.0.

- Swap leftover python2 Requires for explicitly python3 ones,
  rename python package to python3-plplot.

- Switch to using explicit python3 BuildRequires (plplot is
  "unresolvable" for openSUSE <= 1320 anyway); adapt file lists
  accordingly.
- Drop conditionals referring to old openSUSE versions <= 1320.

- Drop legacy dependencies: pkgconfig(gnome-python-2.0) and
  pkgconfig(pygtk-2.0) are not in use.

- Fix License tag in specfile for plplot-octave subpackage: While
  everything else is licensed as LGPL-2.1+, the Octave bindings
  are licensed as GPL-2.0+.

- Drop BuildRequires on libgnomui and libgnomeprintui, as they are
  not really required any more (boo#1067727).
- Change hashbangs for python based examples so that they refer
  directly to the python binary instead of doing so via env.

- Remove the stale gcc-java dependency, since gcc-java is bound to
  go soon and it is really not needed for building here

- Update to version 5.13.0:
  * Bug fixes.
  * The Python binding and examples now work for both Python 2 and
    3.
  * Change the Fortran naming convention.
  * Fix many "space in prefix" issues.
  * Complete rewrite of IPC between -dev wxwidgets and wxPLViewer.
  * Implement a new Windows GDI (wingdi) device driver.
  * Implement new Python extension module to support pytkdemo.
  * Fix OCaml inconsistencies for example 8.
  * Improve the implementation of the OCaml binding.
- Add shapelib BuildRequires for added features.
- Rename fortran shared lib and devel package in keeping with
  corresponding shared object naming changes.
- Use ctest for the check section. This allows the disabling of
  tests that either fail because of issues with the test codes
  themselves (octave), or because of lack of a full Xserver (Qt
  tests).

- Add LDFLAGS=-fPIC to fix the ada compiler test to link successfully
  and enable the generation of ada bindings in Factory.

- Remove Requires(post) since there is not even a %post section.
- Trim descriptions for size, fix wrong summaries.

- Switch to building with Qt5 instead of Qt4.
- Add BuildRequires on qhull, this generates a new shared lib
  now packaged as %{csironn_shlib}.
- Drop unused cmake variables.
- Rename devel pkgs to follow their corresponding shared library
  nomenclature.
- Split out wxPLViewer into its own subpackage, which is now
  called %{name}-wxwidgets (the shared lib which was using this
  name previously has been renamed in keeping with shlib policy).
- Drop %{name}-rpmlintrc file, as it is no longer needed.
- Since version 5.12.0 plplot's fortran bindings depend on
  gcc-fortran >= 6.0.

- Update to version 5.12.0:
  * Bug fixes.
  * Rewrite the CMake Ada language support.
  * Rewrite the Fortran binding.
  * Supply old Fortran binding and examples option.
  * Backwards incompatibilities introduced by the new Fortran
    binding.
  * Examples reworked for the -DPL_DOUBLE=OFF case.
  * Changes to our Ada bindings and examples.
  * Changes to our tclmatrix library.
  * Backwards-incompatible changes to our Tcl/Tk bindings and
    examples.
  * Substantial rewrite of the DocBook documentation.
  * Default page size consistency.
  * Updated D language support.
  * Modernized build-system support for Qt4 and Qt5.
  * Implemented support for pyqt5.
  * Addressed -DPL_DOUBLE=OFF issues.
  * Replaced "Lena" with "Chloe".
  * Removed trailing blanks on most text files in our source tree.
  * Make our wxwidgets find module consistent with the official
    version for CMake-3.7.1.
  * Introduction of two new generic pointer types to help protect
    against a planned future C API breakage.
  * Introduction of additional self-describing names for the types
    of arguments used in our C API.
  * Implement submission of dashboards to the <my.cdash.org> cdash
    server.
  * Substantial update and rename of the Python examples.
  * Linux efficiency improvements for the wxwidgets device driver.
- Drop plplot-cmake36-pkg_check_pkgconfig_macro.patch: upstreamed.
- Rebase plplot-5.9.9-ada-pic.patch for updated version.
- Fix timestamp on previous changelog entry.
- Back to installing plplot.pc by default instead of plplot-c.pc.
- Rename plplot-fortran to libplplotf95-%{sover} as it now
  contains a single shared lib.
- Apply shared library packaging guidelines wherever appropriate;
  remove corresponding %{name}-rpmlintrc snippet. Shared lib
  naming not applied to %{name}-tcltk-libs as all the SO in this
  package are always required together and have their SO numbers
  bumped in lock-step with each other.
- Rename %{name}-tcltk to %{name}-tcltk-libs.
- Except for the most basic drivers, package individual drivers in
  their own subpackages. Users need to individually install
  drivers they need, only mem and null drivers will be installed
  by default [with any of the devel pkgs, for example].
- Split out a %{name}-common package with the most basic drivers
  and common example files included; require it from all driver
  subpackage, and -devel packages.

- build-fix: kill our Xvfb after use

- plplot.pc installs as plplot-c.pc with cmake >= 3.7.1 (now in
  openSUSE:Factory). Manually install a symlink plplot.pc to
  plplot-c.pc for consistency.

- Temporarily disable octave bindings as a workaround to build
  failures caused by octave's upgrade to version 4.2.0 in Factory.

- Enable tk bindings for all openSUSE versions; problem with
  Xvfb segfaulting that prevent building tk bindings for Leap:42.2
  and > 13.2 are worked around by passing the -noreset option to
  Xvfb (see boo#992429).