lsyncd-2.2.3-bp154.1.32

- Added hardening to systemd service(s) (bsc#1181400). Modified:
  * lsyncd.service

- Use %%cmake macros

- Rebase lsyncd-lua.patch and add fix for implicit declaration of
  function lua_objlen - renamed to lua_rawlen in 5.2
- Run spec-cleaner
- Remove insserv configuration and lsyncd-init.d

- Replace %__-type macro indirections. Use %_smp_mflags for
  parallel build.

- update to 2.2.3
  - enhaencement: supporting includes with new filter and filterFrom
    options
  - change: needing now at least Lua 5.2 (Lua 5.1 no longer
    supported, Lua5.3 supported)
  - change: if the target/targetdir ends with a ':' do not append
    a trailing '/' to it, since that would change it from homedir
    to rootdir!
  - add: example for Amazon S3 Bucket (Daniel Miranda)
  - fix: setting stdout/stderr to linebuffer mode.
  - fix: Lua5.3 compatiblity, using load() instead of loadstring()
  - fix: cmake lua detection, will resort to "lua" and "luac"
    binaries only if more specific suffixes (e.g. luac5.3) are not
    available
  - fix: test suit, Lua5.3 compatibility (table.unpack)
- changes from 2.2.2
  - fix: checkgauge 'insist'
  - fix: no partial path exlusion tests
  - fix: write pid of forked process in pidfile
  - fix: crash on not reachable target
  - workaround: changed back to filter style rsync calling until
    https://bugzilla.samba.org/show_bug.cgi?id=12569 is fixed and
    released.
- changes from 2.2.1
  - enhancement: now always using filter lists with rysnc instead
    of include/exclude lists taking advantage of the new
  - -delete-missing-args parameter to delete files on target.
    >>> Thus Lsyncd 2.2.1 needs rsync >= 3.1.0
  - change: added "tests" make target to run all the tests.
  - fix: crash due to typo in changed ^path, ^pathdir, ^pathname
- changes from 2.2.0
  - enhancement: add rsync options:
    "append",
    "append_verify",
    "backup",
    "backup_dir",
    "chmod",
    "chown",
    "copy_dirlinks",
    "existing",
    "groupmap",
    "omit_dir_times",
    "omit_link_times",
    "suffix,"
    "usermap",
  - enhancement: settings{ } now checks for unknown entries and
    errors if so.
  - change: Level3 scripts ^path,^pathdir and ^pathname now don't
    start with a slash.
  - change: Lsyncd now writes a startup log message before
    daemonizing does in case logging fails, it is recognized before
    it cannot message anything about it, since it deamonized
  - change: compatible with Lua5.3 (along with 5.1 and 5.2)
  - change: _verbatim forced for 'exitcodes' entry.
  - change: manpage is not rebuild by default. it is provided
    precompiled.
  - change: faulty/deprecated config files that use
    settings = { ... }, with equal sign are no longer worked
    around.
  - change: default.direct now calls copy with -p
  - fix: potential race conditions: default.rsyncssh will now
    channel deletes also through rsync and treats moves as
    blocking events.
  - fix: ']' is not escaped for rsync rules, since rsync only
    applies doesn't applie pattern matching if no other pattern
    chars are found.
  - fix: Shell injection hole close for default.direct on mv
    commands.
  - fix: Crash of default-direct when source doesn't exit
  - fix: fixed faulty event replacement, a race condition noticed
    by extensive default.rsyncssh testing changed Delays were not
    reflected in Events
- changes from 2.1.6
  - enhancement: Lsyncd now locks its pidfile
  - enhancement: added ssh.identifyFile and ssh.options options
  - enhancement: added rsync inplace option
  - fix: ignore blank lines and rsync commenits in exclude files
  - fix: don't tread exclude lines with embedded "+" chars as
    inclusions
  - fix: crash when debugging inotify
  - fix: fixed Finished/Retrying error messages being swapped around
  - fix: properly encapsulate filenames on ssh mv commands to avoid
    shell command injections.
  - fix: postcmd example
  - change: closes also on INT signals
  - change: now removes its pidfile on INT and TERM signals
  - change: changed build system from autotools to cmake
- change url and source to new location
- remove lsyncd-lua-5_3.patch, because no more need
- aad patch lsyncd-lua.patch to find libraries
- add patch lsyncd-man.patch to put manpages to correct location
- fix all rpmlint warnings
- Replace %__-type macro indirections.
- Use %_smp_mflags for parallel build.

- Updated path to lsyncd.conf for lsyncd.service and lsyncd.sysconfig
  (boo#975118)

- Replace references to /var/adm/fillup-templates with new
  %_fillupdir macro (boo#1069468)

- Explicitly package files installed by make install into _docdir:
  rpm 4.13 no longer implicitly packages those files.

- Add lsyncd-lua-5_3.patch: Fix build with LUA 5.3.

- Remove scriptlets pre/post on systems with sysvinit support.

- Update to version 2.1.5
  * enhancement: Added rsync options: bwlimit, timeout
  * fix: Specifying ssh port no longer overwrites the last rsync option
  * fix: rsync option password_file is now accepted
  * fix: onAttrib is accepted again
  * fix: -log Exec now prints now fully all arguments
  * fix: configure script lua detection now includes math lib to workaround
    wrongly created "needs COMPAT_ALL" messages.
  * fix: repaired variable replacement for layer 3 scripts
  * fix: config.delay is now checked to a number >= 0
  * change: a2x is no longer checked by configure script. should not be
    needed when building from tarball
- Use download Url as source
- Add sysconfig config script support for init scripts
- Fix sysvinit script to be able to use sysconfig options
- Add systemd support for openSUSE > 13.2
- Add required macros to support correctly sysvinit script
- Remove redundant %clean section

- update to 2.1.4
- remove lua 5.2 patch (https://github.com/axkibe/lsyncd/pull/148)

- Build against LUA 5.2

- fix build in factory (build against lua 5.1)

- update to 2.0.5
  * fix: Lsyncd will now terminate if it inotify watching exceeds
    its preset limit.
  * fix: rsync error exit code 12 now results in retries.
  * fix: Lsyncd 2.0.5 should now compile better on a bit elder
    GNU/Linux versions.
  * fix: examples are now installed in the configured document directory.
  * fix: partial transfers during startup are considered ok. Lsyncd
    will rework the specified files anyway.
  * change: Layer 1 interface init() now receives an "Init" event
    instead of an inlet.
  * change: builtin Lua code is now loaded via a c-array.Now more
    portable and correct memory flags are set.
  * change: Lsyncd will now bail on unknown error codes.
  * enhancement: settings.maxProcesses can now be set as a global limit of childprocesses
  * enhancement: Lsyncd will refuse to start when any startup rsync
    does not work cleanly and returns "again" unless settings.insist or
  - -insist is specified, then Lsyncd will keep retrying until it works.
  * enhancement: option "rsyncBinary" determines which rsync Lsyncd calls.
    Default is "/usr/bin/rsync"
  * enhancement: fsevents ("inotify for OSX") fixed for Snowleopard.
    and is available to configure by default.
  * enhancement: settings.inotifyMode: the actualy Modification event
    Lsyncd reacts to can now be configured. Default is to react on
    file closing in write mode.
  * enhancement: readdir(path) is available to userscripts, reads the contents
    of a directory.

- update to 2.0.4
  * enhancement: new setting options logident, logfacility
  * fix: moving filenames with spaces through ssh
  * fix: excludes containing chars % $ ( ) . [ ] + -
  * fix: various typos
  * change: api, settings.statusInterval instead of
  settings.statusIntervall

- update to 2.0.3
  * enhancement: new default target --direct using /bin/ binaries
    to keep to local dirs in sync (and by default
    not preserving ownership)
  * example: added a new example how to remotely execute a command
    after each rsync operations
  * fix: possible crash with long rsyncOps table exceeding lua stack.
  * fix: excludes now properly match relative and absolute paths
  * fix: call to nil function when manually adding blanket delays
  * fix: on ReiserFS not delivering proper dir stats and when
    encountering a symlink, aquire the node stat for the symlink
    instead from the linked node.
  * change: leave lua apichecking enabled by default.

- update to 2.0.2
  * fix: exclude rules not terminated with '/' now match a file or dir
  named exactly the same not starting with.
  * fix: pass exclude rules to the startup sync
  * fix: when matching exclusion to not add inotify use same partial path
    than on syncs
  * fix: properly close pipes that needed more than one write.
- 2.0.1 changes
  * most important fix: The garbage collector in 2.0.0 was able to
    remove event lists just at the wrong moment so an "agent unknown"
    error was raised.
  * fixed: The pid in the pidfile should be now the pid after the deamon
    fork() and not the pid initiators pid.
  * improved: You can now specify multiple command-line options in
    rsyncOps by using a table. eg. rsyncOps = {"--lts", "--safe-links"}

- update to 2.0.0 final

- update to 2.0beta3