* Tue Oct 25 2022 Martin Hauke <mardnh@gmx.de>
- Update to version 22.09.1
* correct API version info in src/VersionInfo.h
* Thu Sep 08 2022 Martin Hauke <mardnh@gmx.de>
- Update to version 22.09.0
* Fix FFTviewer crash when forwarding X11 over SSH
* Add LimeSDR-mini-v2 support
* Workaround crash with libusb-1.0.25
* Fix wxWidgets assertions, GUI sizers and alignments
Version: 20.10.0-bp154.1.172
* Mon Jul 12 2021 Wojciech Kazubski <wk@ire.pw.edu.pl>
- SoapySDR version bumped to 0.8
* Fri Oct 30 2020 Martin Hauke <mardnh@gmx.de>
- Update to version 20.10.0
LimeSuite library changes:
* Fixed GFIR floating point comparison.
* Disabled caller-saves optimization for GCC versions 9.3 onwards
* Changed USB processing, FIFO and remote thread priorities.
* Fixed null pointer dereferences in StreamChannel write/read
functions.
* Added option to configure data link format from API.
* TDD mode registers are reset after initialization on
LimeSDR-Core boards.
* Changed default Common Control Signal value for most boards.
* Changed LMS_Init to tune SXR/SXT PLL's.
* Changed LMS_Init to calibrate Tx frontend IAMP gain.
* Updated SXR/SXT MCU tune algorithm to match host.
* Added optional gain behavior where TIA/IAMP gain elements are
removed from available gain range.
* Improved spurious USB transfer handling.
LimeSuiteGUI:
* Fixed an issue of file close not being called in FFTviewer.
* Fixed compilation for wxWidgets STL.
SoapyLMS:
* Updated linkFormat stream option so it changes link format
in LimeSuite library.
Other changes:
* Added LimeSuite library information to QuickTest.
* Added CMake option to enable optional gain behavior.
- Drop patch (included upstream):
* 0001-Allow-compilation-with-wxWidgets-STL-build.patch
* Sun Sep 06 2020 Stefan Brüns <stefan.bruens@rwth-aachen.de>
- Use wxGTK3 instead of wxWidgets (GTK2), allow building with
STL variant:
* 0001-Allow-compilation-with-wxWidgets-STL-build.patch
- Remove irrelevant dependencies: i2c-tools, sqlite3
* Thu Aug 06 2020 Martin Hauke <mardnh@gmx.de>
- Update to version 20.07.2
- Updated CMake to automatically include atomic library when
needed.
- Updated CMake to include required thread libraries on different
systems.
- Added missing changelog entries and version information
* Fri Jul 31 2020 Martin Hauke <mardnh@gmx.de>
- Update to version 20.07.1
LimeSuite library changes:
* Changed LimeSDR-Mini SXR default values to match SXT
* Fix for lms chip id not changing when setting interface
frequency
* Improve SXT/SXR tune in MCU calibrations
* Set stream FIFO size to be at least 4 packets
* Increased availble COM port values for LimeRFE board
* Added unicode check when LimeRFE COM port is being opened
LimeSuiteGUI:
* Fixed display of CLKGEN values
* Changed numeric slider settings for better fit on some
distributions
* Changed power meter to always be visible in LimeRFE panel
* Changed LimeRFE panel's info to be read only
* Added clear button to LimeRFE info panel
* Fixed GUI freezing when opening LimeRFE board through SDR
connection with flipped cable
SoapyLMS:
* Return actual supported sample rates instead of returning
static limits
Octave:
* Fixed warnings when loading LimeSuite library
Other changes:
* Updated CMake so that LimeRFE module is optional
* Added HW, GW version and temperature information to QuickTest
output
* Fixed LimeUtil loading wrong device with optional arguments
- Remove patch (not longer needed):
* 0001-Remove-some-warnings-LimeRFE-related.patch
Version: 20.01.0-bp152.1.12
* Wed Jan 29 2020 Martin Hauke <mardnh@gmx.de>
- Update to version 20.01.0
LimeSuite library changes:
* Including LimeRFE support
* Update CGEN calculation to allow lower CGEN values
* Configure RF switches (when possible) to avoid transmission
during calibration
* Automatically reconfigure GFIR LPF after sample rate change
* Remove LMS_EnableCalibCache function from LimeSuite.h
* Improve PLL locking in calibration procedures
* Fix Tx transfer size being set to Rx transfer size
* Fix RF path being auto-set after it was selected explicitly
for LimeSDR-Mini
* Add option to perform Rx phase alignment instead of of always
running it
* Improve SXT/SXR tune by automatically retrying with higher
bias current setting
* Update FIFO buffers to use memory more efficiently
SoapyLMS:
* Add oversampling setting
* Set bandwidth to sample rate if bandwidth is not explicitly set
* Fix possible segfault when 2 Rx cahnnels are used
* Pause streaming when changing sample rate
* Return time error when negative timestmp is used
* Automatically use wide enough bandwidth setting for RF
frequencies bellow 30 MHz
* Remove master clock setting
* Add setting descriptions
* Implement read for setting advertised by getSettingInfo()
LimeSuiteGUI:
* Add panel for LMS API function testing
* Add option to play WFM file from software
* fix channel measurement in FFTviewer for Ch.B in MIMO mode
Octave plugin:
* Add LimeGetStreamStatus function
* Add LimeTransceiveSamples function
* Update antenna selection after loading ini file
Other changes:
* Fix LimeQuickTest not outputing to windows command line
- Add patch:
* 0001-Remove-some-warnings-LimeRFE-related.patch
* Mon May 13 2019 Martin Hauke <mardnh@gmx.de>
- Update to version 19.04.0
LimeSuite library changes:
* Added support for LimeNet-Micro v2.1
* Fixed Tx ch.B calibration when Rx ch.B is disabled
* Added save and restore of analog DC/IQ calibration values when
saving/loading INI file
* Fixed Rx only mode not working on LimeSDR-USB with sample
rate <2.5 MSps
* Fixed Rx only mode not working on LimeSDR-USB with sample
rate <2.5 MSps
* change coefficents in LMS7002M::GetTemperature() to approximately
match actual temperature
LimeSuiteGUI:
- Updated "Board controls" panel for LimeNet-Micro
Other changes
- Added LimeNET-Micro support to LimeQuickTest
- LimeSDR-USB v1.4 updated to r2.21 gateware
- LimeSDR-Mini updated to r1.30 gateware
Version: 19.01.0-bp151.2.2
* Thu Mar 07 2019 Martin Hauke <mardnh@gmx.de>
- Upate to version 19.01.0
LimeSuite library changes:
* Allow filtering devices by partial serial number
* Add GPIO control for LimeSDR-Mini
* Change LMS_VCTCXOWrite() to save value to non-volatile storage
* Change LMS_VCTCXORead() to read value from non-volatile storage
* Make some improvements in GFIR setup
* Fix Tx not working when Rx is disabled on LimeSDR-Mini
* Add initial support for LimeNET-Micro
* Add auto RF path selection option (LMS_PATH_AUTO) for
LMS_SetAntenna()
* Remove LMS_Disconnect() and LMS_IsOpen() functions from API
* Add support for sending smaller Tx packets (improve end of
burst handling)
* Change Rx RF path set by LMS_Init() for LimeSDR-USB to LNA_L
* Disable Tx channel in LMS_Init()
LimeSuiteGUI:
* Add GPIO controls to "Board controls" panel for LimeSDR-Mini
* Add option to "Board controls" panel to write VCTCXO value to
non-volatile storage
SoapyLMS:
* Update to soapysdr0.7 module ABI
* add manual DC/IQ calibrations
Other changes:
* LimeUtil: fix LimeSDR-Mini not exiting programming mode after
flashing FPGA
* LimeQuickTest: test 1st board when multiple boards are detected
(instead of exiting)
* Add Octave plugin to CMake build
* Add log handler to Octave plugin
* Add IQ/DC calibration to basicTX example
* LimeSDR-USB v1.4 updated to r2.20 gateware
* LimeSDR-Mini updated to r1.29 gateware
* Sat Nov 10 2018 mardnh@gmx.de
- Update soapy-module version 0.6 -> 0.7
* Fri Oct 05 2018 mardnh@gmx.de
- Upate to version 18.10.0
LimeSuite library changes:
* Fix CalibrateTxGain() XBUF settings for 3rd party boards
* Add interpolation/decimation support for SISODDR mode
* Always use SISODDR mode for LimeSDR-Mini
* Fix Rx filter calibration for 2nd channel with low bandwidth
values
* Fix index lookup for opt_gain_tbb cache (ChB out of bounds)
* Add SXT/SXR VCO cache
* Add FPGA register cache
* Add connection remote (disabled by default)
* Fix incorrect TBB gain control behaviour under certain
conditions
* Disable GFIR coefficient ordering based on oversampling when
coefficient count is to high
* Remove late timestamp reset commands from Rx streaming loop
LimeSuiteGUI:
* Update board controls panel
* Add LPF coefficient calculation controls for GFIRs to TxTSP
and RxTSP tabs
Other changes:
* LimeSDR-USB v1.4 updated to r2.18 gateware
* LimeSDR-Mini updated to r1.27 gateware
* Add Tx only LMS API example
* SoapyLMS: remove stream activity checks
* Wed Jun 13 2018 mardnh@gmx.de
- Update to version 18.06.0
LimeSuite library changes:
* Fixed zero filled packet transmitted on Tx FIFO timeout
* Fixed LMS_GetFrequency() to return correct frequency in TDD mode
* Added HBD/HBI bypass mode for LimeSDR-USB
* Made automatic Tx gain calibrations less frequent
* Fixed some issues with GFIR usage
* Some fixes for LimeSDR-QPCIe
SoapyLMS changes:
* Fixed writeSetting to not throw every time
* Added 'skipCal' stream argument to disable calibration
* Added 'CALIBRATE' setting for writeSetting()
Other changes:
* Added LimeSDR-USB support to LimeQuickTest
* Added sample format and Tx sync selection to FFTviewer
* Fix LimeSuiteConfig for debian packages
* LimeSDR-USB v1.4 updated to r2.17 gateware
* LimeSDR-Mini v1.1 updated to r1.25 gateware
Version: 18.04.1-bp150.1.3
* Thu Apr 19 2018 mardnh@gmx.de
- Update to version 18.04.1
* Add multiple device support for LimeSDR-Mini
* Add QuickTest Utility for LimeSDR-Mini
* Remove calibration cache database
* LimeSuiteGUI: Remove duplicate information from 'Device Info' panel
- Remove patch:
* limesuite-fix-cmake-path.patch (fixed upstream)
* Mon Apr 09 2018 mpluskal@suse.com
- Cleanup with spec-cleaner
* Fri Apr 06 2018 mardnh@gmx.de
- Update to version 18.04.0
* Fixed Tx filter calibration
* Fixed FPGA PLL configuration when B channel is disabled
* Fixed non-working controls in LimeSuiteGUI 'TRX Gain' tab
* Changed CGEN VCO tune algorithm
* LimeSDR-USB v1.4 updated to r2.16 gateware
- Add patch:
* limesuite-fix-cmake-path.patch
- Update to version 18.03.0
SoapyLMS changes:
* Do not tune NCO when LO is within tuning range
* Filter BW reported to match filtersCalibration
* Function implementations changed to use same code as LMS API
LimeSuiteGUI changes:
* Added log levels
* Added additional controls to SPI panel
* Reduced number of programming modes in Programming panel
LimeSuite library changes:
* Added LimeSDR-Mini programming
* Changed default settings for LimeSDR-Mini
* Updated calibrations
* Add phase alignment for dual channel configuration
* Updated FPGA PLL configuration
* Fix B channel only streaming
* Fixed LMS7002M::GetPathRFE for LNAH case
* Fixed CGEN not tuning to 484-487 MHz
LMS API changes:
* LMS_Open() can no longer succeed without connecting to hardware
* LMS_Disconnect() and LMS_IsOpen() are now deprecated because of above change
* Changed firmware/gateware programming functions
* Changed lms_dev_info_t structure
* LMS_SetLOFrequency() now attempts to set different frequencies for A/B channels using NCO
* Fix Rx NCO direction flip (downconvert flag used to set Rx NCO to upconvert)
* Disabling LPF is now same as setting it to maximum bandwidth
* Extented gain range for LMS_SetGaindB()
Other changes:
* Reduce SIMD flags when packaging for x86
* LimeSDR-USB v1.4 updated to r2.15 gateware
* LimeSDR-Mini v1.1 updated to r1.24 gateware
- Add limesuite-fix-cmake-path.patch
* Tue Dec 19 2017 mardnh@gmx.de
- Update to version 17.12.0
SoapyLMS changes:
* Force MIMO alignment
* Add TBB frontend gain configuration
* Fix/adjust gain ranges
LMS API changes:
* Increased USB timeouts
* Updated FTDI library (LimeSDR-Mini on Windows)
* RF switch control for LimeSDR-Mini
* Updated setup/destruction of streams
* various bug fixes
LimeSuiteGUI changes:
* Update LimeSDR-Mini panel
* Sun Nov 05 2017 jengelh@inai.de
- Update descriptions.
* Sat Oct 21 2017 mardnh@gmx.de
- Use SSE-SIMD-FLAGS only on x86_64 machines
* Thu Oct 19 2017 mardnh@gmx.de
- Update to version 17.10.0
SoapyLMS changes:
* Initial support for LimeSDR-Mini
* Disable calibration cache by default
LMS API changes:
* Initial support for LimeSDR-Mini
LimeSuiteGUI changes:
* Added scrollbars
* Fix multiple crashes that occured when board is not connected
* Bring window to front when trying to open already opened window
* Some cosmetic GUI changes
* Added default config button to GUI
Other changes:
* LimeSDR v1.4 updated to r2.11 gateware
- Build with -DENABLE_SIMD_FLAGS="SSE4.2" to avoid the new default
optimization settings "-mmarch=native" otherwise it the binaries
are expected to crash on machines different from the build hosts.
* Sun Oct 01 2017 mardnh@gmx.de
- Update to version 17.09.1
SoapyLMS changes:
- SoapyLMS7 caches stream enable and disables on close
- Fixed late packet reporting in SoapyLMS7 stream status
LMS API changes:
- Added simple GPIO example utilizing functions from LimeSuite.h
- Fixed WriteStream() end of burst flushing in fifo.h
- Fixed abs() overload compiler issue in lms7_device.cpp
- Removed private include in mcu_program/host_src/main.cpp
- Fixed error checking bug causing compilation error on MacOS in
LMS_GetGaindB() and LMS_GetNormalizedGain()
Other changes:
- LimeSDR v1.4 updated to r2.10 gateware
- Update to version 17.09.0
LimeSuite library changes:
- Added transfer size adjustment based on sample rate
- Improved MCU calibration procedures
- Initial support for LimeSDR-QPCIe
- Changed format to 16 bit for data transfer when float (non-native) format
is selected in API
LMS API changes:
- Added external reference clock(LMS_CLOCK_EXTREF) configuration to
LMS_SetClockFreq()
- Change LMS_SetGaindB() and LMS_SetNormalizedGain() to select optimal
TBB gain for TX
- Fixed LMS_GetStreamStatus() not returning some status values
LimeSuiteGUI changes:
- Unified read/write params in board controls panel
- Fixed some GUI fields not updating correctly/reporting wrong values
Other changes:
- LimeSDR v1.4 updated to r2.9 gateware
- Added LMS API doxygen generation to CMake
- Added CMake option to enable compiler SIMD flags
* Wed Jun 21 2017 mardnh@gmx.de
- Update to version 17.06.0
API additions:
- LMS_GPIODirRead
- LMS_GPIODirWrite
- LMS_CalibrateInternalADC
- LMS_CalibrateAnalogRSSIDC
- LMS_CalibrateRP_BIAS
- LMS_CalibrateTxGain
- LMS_SetClockFreqWithSpurCancelation
General changes:
- SoapyLMS7 - added getMasterClockRates()
- SoapyLMS7 - added getSampleRateRange()
- LimeSDR v1.4 updated to r2.8 gateware
- GPIO support in SoapyLM7 module
- Library level logging support
- Speed up x640,x641 spi
- FFTviewer: add checkbox for RX->TX loopback control
- Merged major MCU based calibrations update
* Fri May 05 2017 mardnh@gmx.de
- Update soapy-module version 0.5-2 -> 0.6
* Wed May 03 2017 mardnh@gmx.de
- Update to version 17.02.2
- Fixed register typo in LMS7002M::SetTxDCOffset()
- Added option defaults for stream args in SoapyLMS7
- Fixed LMS7002M::GetPathRFE() currently selected path
* Wed Apr 19 2017 mardnh@gmx.de
- initial package, version 17.02.1