duply-2.4.2-bp156.2.1

- update to 2.4.2:
  * change to purgeAuto in systemd unit files (thx B.Foresman)
  * systemd files should go in /etc, not /lib (thx B.Foresman)
  * read -N not available on macOS (thx Peter Torelli)

- update to 2.4.1:
  * fixup duplicity links, moved to http://duplicity.us
  * bugfix: duply hangs on awk version detection on OpenBSD (thx phthomas137)

- Update to 2.4:
  - bugfix #127: date_from_nsecs ignores format string
  - bugfix #116: separators print date now too
  - featreq #48: add purgeAuto command (see man page)
  - replaced tab indents with 2spaces everywhere
  - bugfix #129,131,132: duply stumbles over 'python -s' shebang,
    python interpreter parse failed if duplicity is a snap app
  - bugfix #130: duplicity version check failed "gpg: WARNING: ..."
  - version output, always print PYTHONPATH, if interpreter was determined
  - update python references to python3
- Changes from 2.3.1:
  - bugfix 123: symmetric encryption errs out, asks for '' private key
- Changes from 2.3:
  - don't import whole key pair anymore if only pub/sec is requested
  - gpg import routine informs on missing key files in profile now
  - add check/import needed secret key for decryption
  - featreq 50: Disable GPG key backups, implemented/added settings
    GPG_IMPORT/GPG_EXPORT='disabled' to conf template

- update to 2.2.2:
  - bugfix 120: Failures in "Autoset trust of key" during restore
    because of gpg2.2 fingerprint output change
  - featreq 46: Example systemd units & Howto, courtesy of Jozef Riha
  - featreq 47: Clarify message about keeping the profile, also by Jozef Riha
  - fix abbreviation spelling of 'e.g.'

- Fix source download URL.

- Updated to version 2.2:
  + Implement grouping for batch commands new separators are []
    (square brackets) or groupIn/groupOut command 'backup'
    translates now to [pre_bkp_post] to be skipped as one block in
    case a condition was set in the batch instruction.
- Changes from version 2.1:
  + Be more verbose when duplicity version detection fails.
  + Using info shows python binary's path for easier
    identification now.
  + Reworked python interpreter handling, it's either configured
    per PYTHON var unconfigured, parsed from duplicity shebang or
    set to current duplicity default 'python2' (was 'python' until
    now).
  + Donot quotewrap strings because of slashes (eg. paths) anymore.
  + Bugfix: improved in/exclude stripping from conf DUPL_PARAMS.
- Remove obsolete Groups tag (fate#326485).

- Ensure neutrality of descriptions.

- Update to version 2.0.4:
  + Bugfix 114: "duply usage is not current" wrt. purgeFull/Incr.
  + Bugfix 115: typo in error message - "Not GPG_KEY entries"
    should be "No".
  + Bugfix 117: no duply_ prefix when ARCH_DIR is set in conf.
  + Occasionally shows negative runtimes, (deb#882159).
- Changes from version 2.0.3:
  +Bugfix: "line 2231: CMDS: bad array subscript".

- Update to version 2.0.2:
  * Bugfix: never insert creds into file:// targets.
  * Bugfix: avail profiles hint sometimes shortend the names by one
    char.
  * Bugfix 108: CMD_NEXT variable should ignore conditional commands
    (and, or).
  * Export condition before/after next/prev command as
    CND_PREV,CND_NEXT now.
  * Bugfix 97: Unknown command should be ERROR, not WARNING.
- Changes from version 2.0.1:
  * Bugfix 104: Duply 2.0 sets wrong archive dir, --name was always
    'duply_'.
- Changes from version 2.0:
  * Made this a major version change, as we broke backward
    compatibility anyway. If your backend stops working w/ this
    version create a new profile and export the env vars needed as
    described in the comments of the conf file directly above the
    SOURCE setting.
  * Making sure multi spaces in TARGET survive awk processing.
  * New env var PROFILE exported to scripts.
  * Fix 102: expose a unique timestamp variable for pre/post scripts
    actually a featreq. exporting RUN_START nanosec unix timestamp.
  * Fix 101: GPG_AGENT_INFO is 'bogus'.
  * Fix 96: duply cannot handle two consecutive spaces in paths.
- Update Copyright year.

- Update to version 1.11.3:
  + Fix wrong "WARNING: No running gpg-agent ..." when sign key was
    not set.
- Changes from version 1.11.2:
  + Fix "gpg: unsafe" version print out.
  + Bugfix 91: v1.11 [r47] broke asymmetric encryption when using
    GPG_KEYS_ENC.
  + Bugfix 90: S3: TARGET_USER/PASS have no effect, added
    additional documentation about needed env vars to template
    conf file.
- Changes from version 1.11.1:
  + Reverted duply's default PYTHON to 'python'.
- Changes from version 1.11:
  + Remove obsolete --ssh-askpass routine.
  + Add PYTHON conf var to allow global override of used python
    interpreter.
  + Enforced usage of "python2" in PATH as default interpreter for
    internal use _and_ to run duplicity (setup.py changed the
    shebang to the fixed path /usr/bin/python until 0.7.05, which
    we circumvent this way).
  + Feature 36: Support gpg-connect-agent as a means to detect if
    an agent is running, used gpg-agent for detection though.
  + Quotewrapped run_cmd parameters to protect it from spaces eg.
    in TMP path.
  + Key export routine respects gpg-agent usage now.
- Update copyright year.
- Add ChangeLog to package.

- Update to version 1.10.1:
  + Bugfix 86: Duply+Swift outputs warning.
  + Bugfix 87: Swift fails without BACKEND_URL.
- Changes from 1.10:
  + Featreq 36: busybox issues - fix awk, grep version detection,
    fix grep failure because --color=never switch is unsupported.
  + Bugfix 81: --exclude-globbing-filelist is deprecated since
    0.7.03.
  + Implemented base-/dirname as bash functions.
  + Featreq 31 " Support for duplicity Azure backend " - ignored a
    contributed patch by Scott McKenzie and instead opted for
    removing almost all code that deals with special env vars
    required by backends. Adding and modifying these results in too
    much overhead so I dropped this feature. The future alternative
    for users is to consult the duplicity manpage and add the
    needed export definitions to the conf file. Appended a
    commented example to the template conf below the auth section.
- Changes from 1.9.2:
  + Bugfix: exporting keys with gpg2.1 works now.
  + Documented GPG_OPTS needed for gpg2.1 to conf template.
  + Bugfix 82: GREP_OPTIONS=--color=always disrupted time
    calculation.
  + Added GPG conf var (see conf template for details).
  + Added grep version output as it is an integral needed binary.
  + Added PYTHONPATH printout in version output.
- Changes from 1.9.1:
  + Export CMD_ERR now for scripts to detect if CMD_PREV
    failed/succeeded.
  + Bugfix: CMD_PREV contained command even if it was skipped.
- Changes from 1.9.0:
  + Bugfix: env vars were not exported when external script was
    executable.
  + Rework GPG_KEY handling, allow virtually anything now (uid,
    keyid etc.) see gpg manpage, section "How to specify a user ID"
    let gpg complain when the delivered values are invalid for
    whatever reason.
  + Started to rework tmp space checking, exposed folder & writable
    check. TODO: reimplement enough file space available checking.
- Changes from 1.8.0:
  + Add command verifyPath to expose 'verify --file-to-restore'
    action.
  + Add time parameter support to verify command.
  + Add section time formats to usage output.

- Update to version 1.7.4:
  + remove ubuntu one support, service is discontinued
  + featreq 31: add authenticated swift (contributed by Justus Seifert)
- Update to version 1.7.3:
  + bugfix: test routines, gpg2 asked for passphrase although GPG_PW was set
- Update to version 1.7.2:
  + bugfix: debian Bug#743190 "duply no longer allows restoration without
    gpg passphrase in conf file"
    GPG_AGENT_INFO env var is now needed to trigger --use-agent
  + bugfix: gpg keyenc test routines didn't work if GPG_PW was not set
- Update to version 1.7.1:
  + bugfix: purge-* commands renamed to purgeFull, purgeIncr due to
    incompatibility with new minus batch separator
- Update to version 1.7.0:
  + disabled gpg key id plausibility check, too many valid possibilities
  + featreq 7 "Halt if precondition fails":
    added and(+), or(-) batch command(separator) support
  + featreq 26 "pre/post script with shebang line":
    if a script is flagged executable it's executed in a subshell
    now as opposed to sourced to bash, which is the default
  + bugfix: do not check if dpbx, swift credentials are set anymore
  + bugfix: properly escape profile name, archdir if used as arguments
  + add DUPL_PRECMD conf setting for use with e.g. trickle

- Update to version 1.6.0:
  + support gs backend
  + support dropbox backend
  + add gpg-agent support to gpg test routines
  + autoenable --use-agent if passwords were not defined in config
  + GPG_OPTS are now honored everywhere, keyrings or complete gpg
    homedir can thus be configured to be located anywhere
  + always import both secret and public key if avail from config profile
  + new explanatory comments in initial exclude file
  + bugfix 7: Duply only imports one key at a time
- Update to version 1.5.11:
  + purge-incr command for remove-all-inc-of-but-n-full feature added
    patch provided by Moritz Augsburger, thanks!
  + documented version command in man page

- Updated to version 1.5.10:
  + Bugfix: exclude filter failed on ubuntu, mawk w/o posix char
    class support.
  + Bugfix: fix url_decoding generally and for python3.
  + Bugfix 3609075: wrong script results in status line
  (thx David Epping).

- Updated to 1.5.9:
  + Bugfix 3588926: filter --exclude* params for restore/fetch ate
    too much.
  + Restore/fetch now also ignores --include* or --exclude='foobar'
- Updates from 1.5.8:
  + Bugfix 3575487: implement proper cloud files support.

- Update to version 1.5.7:
  + Bugfix 3531450: Cannot use space in target URL (file:///)
    anymore.
- Updates from 1.5.6:
  + Commands purge, purge-full have no default value anymore for
    security reasons; instead max value can be given via cmd line
    or must be set in profile; else an error is shown.
  + Minor man page modifications
- Updates from 1.5.5.5:
  + Bugfix 3479605: SEL context confused profile folder's
    permission check.
  + Colon ':' in url passphrase got ignored, added python driven
    url_decoding for user & pass to better process special chars.

- Update to version 1.5.5.4:
  + Bugfix 3421268: SFTP passwords from conf ignored and always
    prompted for.
  + Add support for separate sign passphrase (needs duplicity
    0.6.14+).

- Update version to 1.5.5.3:
  + Bugfix 3416690: repaired preview threw echo1 error.
  + Fix unknown cmds error usage & friends if more than 2 params
    were given.
- Updates from 1.5.5.2:
  + Bugfix 3409643: ssh key auth did ask for passphrase
    (--ssh-askpass ?).
  + Bugfix: mawk does not support \W and did not split multikey
    definitions.
  + All parameters should survive  single (') and double (")
    quotes now.

- Remove redundant tags/sections from specfile
  (cf. packaging guidelines)

- Initial build.