Package Release Info

clustershell-1.9.2-bp157.1.2

Update Info: Base Release
Available in Package Hub : 15 SP7

platforms

AArch64
ppc64le
s390x
x86-64

subpackages

clustershell
python3-clustershell

Change Logs

Version: 1.10.1-bp161.1.1
* Fri Jul 17 2026 Stephane Thiell <stephane@thiell.com>
- Update to upstream release 1.10.1:
  * setup: install the ansible.conf.example group source example,
    which was missing from binary packages in 1.10 (#645)
  * NodeSet: fix stepped slices across multiple patterns on
    Python 3 (#661)
  * RangeSet: fix unpickling of empty sets (#658)
  * Communication: pin the pickle protocol used for gateway
    messages, fixing tree mode across mixed Python versions,
    including Python 3.14 (#658)
  * Communication: fix TypeError when reporting channel errors
    (#673)
  * Tree: report gateway errors received before channel setup
    (#674)
  * Tree: fix rcopy extraction error reporting (#663)
  * EngineClient: remove stream on broken pipe, fixing a possible
    hang with the select engine (#651, #652)
  * Engine: fix error handling in the EPoll and Select event
    loops (#662)
  * conf: remove the deprecated Cray ACE group source example
    (#644)
  * doc: refresh the installation guide, port library examples to
    Python 3, and improve man page and Sphinx documentation
* Sat Jul 04 2026 Stephane Thiell <sthiell@stanford.edu>
- Update to upstream release 1.10:
  * NodeUtils: add the 'mapall' group source upcall to retrieve all
    group mappings in a single call, greatly speeding up group
    resolution on slow sources (#612, #613)
  * NodeUtils: do not pass stdin to group source upcalls (#581)
  * NodeSet, RangeSet: add a list-like index() method returning the
    position of a node or element, the inverse of [i] (#631, #633)
  * cluset, nodeset: add a --index command to output a node's
    position in the set, the reverse of -I/--slice (#637)
  * groups.conf: add mapall upcalls to the Slurm group bindings (#623)
  * groups.conf: add an Ansible inventory group source example (#610)
  * clush, clubak: add --axis to fold nD node sets along selected
    axis only, as already supported by nodeset and cluset (#356)
  * Display: fix line buffering on Python 3.6 (#597)
  * Tree: implement TreeWorker.abort() and per-gateway abort, with
    gateway failover fixes (#229, #566)
  * Tree: fire ev_pickup only once the command can no longer be
    rerouted and improve reroute event reporting (#594)
  * Tree: fix rcopy when a remote node closes (#545)
  * Tree: improve handling of MessageProcessingError (#596)
  * Tree: keep tar/scp errors on stderr instead of stdout during
    forward copy (#622)
  * Tree: pass filter='fully_trusted' to tarfile.extractall()
    (PEP 706) (#617)
  * EngineClient: properly honor the abort flag on close (#591)
  * Engine: fix set_events debug logging to identify the client and
    stream (#630)
  * Task: only terminate a task once when killed, fixing a double
    termination (#110, #640)
  * NodeUtils, Topology: emit a DeprecationWarning for set_verbosity()
    and the topology.conf [Main] section (#226, #639)
  * completion: complete copy paths and command, and short options
    without spaces (#585, #586)
  * completion: treat -b/-B and clush's other no-arg options as flags
    (#598, #619)
  * completion: fix cluset no-arg option lists (#620)
  * setup: clean up wheel packaging metadata (#634)
- Update Source0 to the new PyPI sdist filename, lowercase since 1.10
  per PEP 625: clustershell-1.10.tar.gz (importable Python module is
  still named ClusterShell)
- Update URL to new upstream project page (repository moved to
  https://github.com/clustershell/clustershell)
- Ship the bash completions for clush, cluset and nodeset
- Add an import smoke test to the spec check section
- Set explicit permissions on the ghost groups file (rpmlint
  zero-perms-ghost)
* Mon Jun 16 2025 Nico Krapp <nico.krapp@suse.com>
- Update to 1.9.3
  * Fix few typos in ChangeLog found by codespell
  * Corrects a typo found by typos [1]
  * Update clush.rst to fix broken URL for llnl.gov pdsh page
  * Tree: use set instead of NodeSet for gwtargets tracking
  * Additional Slurm example bindings
  * Additional Slurm binding for mapping nodes to reservations
  * GitHub Actions: test also with Python 3.12
  * GitHub Actions: update actions to their latest versions
  * Fix tests for libexpat >=2.6.0 (or with CVE-2023-52425 fixes backported)
  * Communication: sax parser: add flush() after feed()
  * CLI/Nodeset: omit @source: prefix for cluset -s source -L
  * GitHub Actions: add Python 3.13
  * bash completions
  * Release 1.9.3
  * Bump pillow from 5.4.1 to 10.3.0 in /doc/sphinx
- convert to pip-based build
- remove obsolete python2 subpackage
Version: 1.9.2-bp156.1.1
* Mon Oct 02 2023 Stephane Thiell <sthiell@stanford.edu>
- Update to upstream release 1.9.2:
  * clush/clubak: fix line buffering with Python 3
  * clush: fix --[r]copy dest when --dest is omitted
  * NodeUtils: allow null values in cluster.yaml
  * Topology: check that node groups/wildcards are non-empty
  * packaging: fix missing xcat.conf.example
Version: 1.9.1-bp155.1.6
* Sat Feb 11 2023 Stephane Thiell <sthiell@stanford.edu>
- Update to upstream release 1.9.1:
  * clush: select proper last parsed config file
  * setup.py: update download url and remove python 2.6 support
  * setup.py: improvements for pip install and venv
  * doc: correct typo 'sterr'
  * Fix typos found with codespell
  * RangeSet: support negative ranges
  * RangeSet: remove duplicate intiter() definition
Version: 1.9-bp154.3.3.1
* Mon Nov 28 2022 Stephane Thiell <sthiell@stanford.edu>
- Update to upstream release 1.9:
  * clush: add --mode support with sudo and sshpass examples
  * clush: add options '--outdir=OUTDIR' and '--errdir=ERRDIR'
  * clush: always close stdin stream of worker when it is not used
  * clush: use daemon attribute instead of deprecated setDaemon()
  * slurm.conf.example: filter out more Slurm node state flags
  * NodeSet: add special notation @@source to expand group names
  * RangeSet: nD folding optimization
  * RangeSet: support ranges with zero padding of mixed lengths
  * RangeSet: add explicit intiter() method to iterate over integers
  * EngineClient: EnginePort improvements, add event ev_port_start()
  * Tree: fix start and bufferize early writes
  * Tree: fix error with intermediate gateways
  * Defaults: Introduce CLUSTERSHELL_CFGDIR
  * Fix for python-3.10
  * Worker: deprecate old EventHandler method signatures
  * Worker: remove old last_*() methods
* Wed May 18 2022 Steve Kowalik <steven.kowalik@suse.com>
- Prepare for Python 3.10 by correcting sitelib install paths.
Version: 1.8.4-bp154.2.1
* Mon May 16 2022 Yuchen Lin <mlin+factory@suse.de>
- Disable py2 support on Leap 15.4
* Mon Nov 08 2021 Stephane Thiell <sthiell@stanford.edu>
- Update to upstream release 1.8.4:
  * RangeSetND: fix padding info when slicing using __getitem__()
  * Defaults: Allow out-of-tree worker modules
  * NodeUtils: allow YAML list to declare node groups
  * Tree: Use default local_worker and allow overriding Defaults
  * Worker/Rsh: return maxrc properly for Rsh Worker
  * xCAT binding: add support for spaces in group names
  * CLI/Clush: Avoid python3 error with no stdin
  * CLI/Clush: use os.read() in stdin thread
  * CLI/Clush: Add maxrc option to clush.conf
  * CLI/Display: Add support for NO_COLOR and CLICOLOR
* Tue Sep 08 2020 Egbert Eich <eich@suse.com>
- Grab updated spec file from upstream to fix Python2 handling.
* Wed Jul 29 2020 Egbert Eich <eich@suse.com>
- Update to upstream release 1.8.3:
  * Worker/ScpClient: always put remote into brackets (#424)
  * RangeSetND: fix padding info when slicing using __getitem__() (#429)
  * Defaults: Allow out-of-tree worker modules
- Resync spec file with upstream, disable Python2 where not supported
  any more.
- Obsolete python2 package that may be installed when building for
  python3 only.
* Sat Nov 30 2019 Stephane Thiell <sthiell@stanford.edu>
- The correct license is LGPL-2.1-or-later
* Fri Nov 29 2019 Ana Guerrero Lopez <aguerrero@suse.com>
- Update to upstream release 1.8.2:
  * clush: support UTF-8 string encoding with --diff
  * in some cases, timers were too fast due to an issue in EngineTimer
  * fix issue in the Slurm group bindings where job ids were used
    instead of user names
  * performance update for xCAT group bindings
- Update Source to download from GitHub directly
- Use %license and %fdupes
Version: 1.8.1-bp151.1.5
* Mon Nov 26 2018 Stephane Thiell <sthiell@stanford.edu>
- Update to upstream release 1.8.1:
  * support offline gateways in Tree mode
  * CLI: added --conf and --groupsconf command line options
  * NodeSet: speed-up nodeset parsing
  * EventHandler: reinstate ev_error and ev_timeout as deprecated
  * nodeset/cluset CLI: allow litteral new line in -S
  * nodeset/cluset CLI: handle multiline shell arguments in options
Version: 1.8-bp150.2.2
* Thu Oct 26 2017 sthiell@stanford.edu
- Update to new upstream release 1.8:
  * added Python 3 support (3.4+)
  * support for Python 2.5 and below has been dropped
  * new EventHandler API (backward compatible)
  * task.shell() has a new stdin (boolean) argument
  * NodeSet/nodeset/cluset can now handle numeric node names
  * clush now use slightly different colors that are legible on
    dark backgrounds
* Wed Sep 13 2017 sthiell@stanford.edu
- initial support for openSUSE
* Wed Sep 06 2017 sthiell@stanford.edu
- fix condition for ghost groups symlink
* Sun Sep 03 2017 sthiell@stanford.edu
- move vim extensions into the clustershell package
- use Requires: vim-filesystem instead of vim-common
- define upgrade path for vim-clustershell
* Sat Sep 02 2017 sthiell@stanford.edu
- create separate packages for python2 and python3 modules
* Fri Sep 01 2017 sthiell@stanford.edu
- update to 1.7.81 (1.8 beta1)
* Tue Dec 20 2016 sthiell@stanford.edu
- update to 1.7.3
* Sat Jun 18 2016 sthiell@stanford.edu
- update to 1.7.2
* Mon Feb 29 2016 sthiell@stanford.edu
- update to 1.7.1
* Tue Nov 10 2015 sthiell@stanford.edu
- update to 1.7
* Fri Aug 07 2015 stephane.thiell@cea.fr
- update to 1.6.96
* Sun Apr 08 2012 stephane.thiell@cea.fr
- update to 1.6
* Thu Jun 09 2011 stephane.thiell@cea.fr
- update to 1.5.1
* Wed Jun 08 2011 stephane.thiell@cea.fr
- update to 1.5
* Sat Mar 19 2011 stephane.thiell@cea.fr
- update to 1.4.3
* Tue Mar 15 2011 stephane.thiell@cea.fr
- update to 1.4.2
* Sun Feb 13 2011 stephane.thiell@cea.fr
- update to 1.4.1
* Sat Jan 15 2011 stephane.thiell@cea.fr
- update to 1.4
* Wed Oct 20 2010 stephane.thiell@cea.fr
- update to 1.3.3
* Fri Sep 10 2010 stephane.thiell@cea.fr
- renamed Vim subpackage to vim-clustershell
- update to 1.3.2