* Mon Nov 28 2022 Stephane Thiell <sthiell@stanford.edu>
- Update to upstream release 1.9:
* clush: add --mode support with sudo and sshpass examples
* clush: add options '--outdir=OUTDIR' and '--errdir=ERRDIR'
* clush: always close stdin stream of worker when it is not used
* clush: use daemon attribute instead of deprecated setDaemon()
* slurm.conf.example: filter out more Slurm node state flags
* NodeSet: add special notation @@source to expand group names
* RangeSet: nD folding optimization
* RangeSet: support ranges with zero padding of mixed lengths
* RangeSet: add explicit intiter() method to iterate over integers
* EngineClient: EnginePort improvements, add event ev_port_start()
* Tree: fix start and bufferize early writes
* Tree: fix error with intermediate gateways
* Defaults: Introduce CLUSTERSHELL_CFGDIR
* Fix for python-3.10
* Worker: deprecate old EventHandler method signatures
* Worker: remove old last_*() methods
* Wed May 18 2022 Steve Kowalik <steven.kowalik@suse.com>
- Prepare for Python 3.10 by correcting sitelib install paths.
Version: 1.10.1-bp161.1.1
* Fri Jul 17 2026 Stephane Thiell <stephane@thiell.com>
- Update to upstream release 1.10.1:
* setup: install the ansible.conf.example group source example,
which was missing from binary packages in 1.10 (#645)
* NodeSet: fix stepped slices across multiple patterns on
Python 3 (#661)
* RangeSet: fix unpickling of empty sets (#658)
* Communication: pin the pickle protocol used for gateway
messages, fixing tree mode across mixed Python versions,
including Python 3.14 (#658)
* Communication: fix TypeError when reporting channel errors
(#673)
* Tree: report gateway errors received before channel setup
(#674)
* Tree: fix rcopy extraction error reporting (#663)
* EngineClient: remove stream on broken pipe, fixing a possible
hang with the select engine (#651, #652)
* Engine: fix error handling in the EPoll and Select event
loops (#662)
* conf: remove the deprecated Cray ACE group source example
(#644)
* doc: refresh the installation guide, port library examples to
Python 3, and improve man page and Sphinx documentation
* Sat Jul 04 2026 Stephane Thiell <sthiell@stanford.edu>
- Update to upstream release 1.10:
* NodeUtils: add the 'mapall' group source upcall to retrieve all
group mappings in a single call, greatly speeding up group
resolution on slow sources (#612, #613)
* NodeUtils: do not pass stdin to group source upcalls (#581)
* NodeSet, RangeSet: add a list-like index() method returning the
position of a node or element, the inverse of [i] (#631, #633)
* cluset, nodeset: add a --index command to output a node's
position in the set, the reverse of -I/--slice (#637)
* groups.conf: add mapall upcalls to the Slurm group bindings (#623)
* groups.conf: add an Ansible inventory group source example (#610)
* clush, clubak: add --axis to fold nD node sets along selected
axis only, as already supported by nodeset and cluset (#356)
* Display: fix line buffering on Python 3.6 (#597)
* Tree: implement TreeWorker.abort() and per-gateway abort, with
gateway failover fixes (#229, #566)
* Tree: fire ev_pickup only once the command can no longer be
rerouted and improve reroute event reporting (#594)
* Tree: fix rcopy when a remote node closes (#545)
* Tree: improve handling of MessageProcessingError (#596)
* Tree: keep tar/scp errors on stderr instead of stdout during
forward copy (#622)
* Tree: pass filter='fully_trusted' to tarfile.extractall()
(PEP 706) (#617)
* EngineClient: properly honor the abort flag on close (#591)
* Engine: fix set_events debug logging to identify the client and
stream (#630)
* Task: only terminate a task once when killed, fixing a double
termination (#110, #640)
* NodeUtils, Topology: emit a DeprecationWarning for set_verbosity()
and the topology.conf [Main] section (#226, #639)
* completion: complete copy paths and command, and short options
without spaces (#585, #586)
* completion: treat -b/-B and clush's other no-arg options as flags
(#598, #619)
* completion: fix cluset no-arg option lists (#620)
* setup: clean up wheel packaging metadata (#634)
- Update Source0 to the new PyPI sdist filename, lowercase since 1.10
per PEP 625: clustershell-1.10.tar.gz (importable Python module is
still named ClusterShell)
- Update URL to new upstream project page (repository moved to
https://github.com/clustershell/clustershell)
- Ship the bash completions for clush, cluset and nodeset
- Add an import smoke test to the spec check section
- Set explicit permissions on the ghost groups file (rpmlint
zero-perms-ghost)
* Mon Jun 16 2025 Nico Krapp <nico.krapp@suse.com>
- Update to 1.9.3
* Fix few typos in ChangeLog found by codespell
* Corrects a typo found by typos [1]
* Update clush.rst to fix broken URL for llnl.gov pdsh page
* Tree: use set instead of NodeSet for gwtargets tracking
* Additional Slurm example bindings
* Additional Slurm binding for mapping nodes to reservations
* GitHub Actions: test also with Python 3.12
* GitHub Actions: update actions to their latest versions
* Fix tests for libexpat >=2.6.0 (or with CVE-2023-52425 fixes backported)
* Communication: sax parser: add flush() after feed()
* CLI/Nodeset: omit @source: prefix for cluset -s source -L
* GitHub Actions: add Python 3.13
* bash completions
* Release 1.9.3
* Bump pillow from 5.4.1 to 10.3.0 in /doc/sphinx
- convert to pip-based build
- remove obsolete python2 subpackage
Version: 1.8.4-bp154.2.1
* Mon May 16 2022 Yuchen Lin <mlin+factory@suse.de>
- Disable py2 support on Leap 15.4
* Mon Nov 08 2021 Stephane Thiell <sthiell@stanford.edu>
- Update to upstream release 1.8.4:
* RangeSetND: fix padding info when slicing using __getitem__()
* Defaults: Allow out-of-tree worker modules
* NodeUtils: allow YAML list to declare node groups
* Tree: Use default local_worker and allow overriding Defaults
* Worker/Rsh: return maxrc properly for Rsh Worker
* xCAT binding: add support for spaces in group names
* CLI/Clush: Avoid python3 error with no stdin
* CLI/Clush: use os.read() in stdin thread
* CLI/Clush: Add maxrc option to clush.conf
* CLI/Display: Add support for NO_COLOR and CLICOLOR
* Tue Sep 08 2020 Egbert Eich <eich@suse.com>
- Grab updated spec file from upstream to fix Python2 handling.
* Wed Jul 29 2020 Egbert Eich <eich@suse.com>
- Update to upstream release 1.8.3:
* Worker/ScpClient: always put remote into brackets (#424)
* RangeSetND: fix padding info when slicing using __getitem__() (#429)
* Defaults: Allow out-of-tree worker modules
- Resync spec file with upstream, disable Python2 where not supported
any more.
- Obsolete python2 package that may be installed when building for
python3 only.
* Sat Nov 30 2019 Stephane Thiell <sthiell@stanford.edu>
- The correct license is LGPL-2.1-or-later
* Fri Nov 29 2019 Ana Guerrero Lopez <aguerrero@suse.com>
- Update to upstream release 1.8.2:
* clush: support UTF-8 string encoding with --diff
* in some cases, timers were too fast due to an issue in EngineTimer
* fix issue in the Slurm group bindings where job ids were used
instead of user names
* performance update for xCAT group bindings
- Update Source to download from GitHub directly
- Use %license and %fdupes
Version: 1.8-bp150.2.2
* Thu Oct 26 2017 sthiell@stanford.edu
- Update to new upstream release 1.8:
* added Python 3 support (3.4+)
* support for Python 2.5 and below has been dropped
* new EventHandler API (backward compatible)
* task.shell() has a new stdin (boolean) argument
* NodeSet/nodeset/cluset can now handle numeric node names
* clush now use slightly different colors that are legible on
dark backgrounds
* Wed Sep 13 2017 sthiell@stanford.edu
- initial support for openSUSE
* Wed Sep 06 2017 sthiell@stanford.edu
- fix condition for ghost groups symlink
* Sun Sep 03 2017 sthiell@stanford.edu
- move vim extensions into the clustershell package
- use Requires: vim-filesystem instead of vim-common
- define upgrade path for vim-clustershell
* Sat Sep 02 2017 sthiell@stanford.edu
- create separate packages for python2 and python3 modules
* Fri Sep 01 2017 sthiell@stanford.edu
- update to 1.7.81 (1.8 beta1)
* Tue Dec 20 2016 sthiell@stanford.edu
- update to 1.7.3
* Sat Jun 18 2016 sthiell@stanford.edu
- update to 1.7.2
* Mon Feb 29 2016 sthiell@stanford.edu
- update to 1.7.1
* Tue Nov 10 2015 sthiell@stanford.edu
- update to 1.7
* Fri Aug 07 2015 stephane.thiell@cea.fr
- update to 1.6.96
* Sun Apr 08 2012 stephane.thiell@cea.fr
- update to 1.6
* Thu Jun 09 2011 stephane.thiell@cea.fr
- update to 1.5.1
* Wed Jun 08 2011 stephane.thiell@cea.fr
- update to 1.5
* Sat Mar 19 2011 stephane.thiell@cea.fr
- update to 1.4.3
* Tue Mar 15 2011 stephane.thiell@cea.fr
- update to 1.4.2
* Sun Feb 13 2011 stephane.thiell@cea.fr
- update to 1.4.1
* Sat Jan 15 2011 stephane.thiell@cea.fr
- update to 1.4
* Wed Oct 20 2010 stephane.thiell@cea.fr
- update to 1.3.3
* Fri Sep 10 2010 stephane.thiell@cea.fr
- renamed Vim subpackage to vim-clustershell
- update to 1.3.2