ckb-next-0.4.4-bp153.2.3.1

- Fix double slash in /bin/bash requirement in
  ckb-next-use-run.patch (fixes boo#1186929)

- Update to version 0.4.4
  Important bugfixes:
  * Fixed a crash when creating a new profile
  * Fixed lights turning off unexpectedly or not being restored
    correctly
  * Macros can now be repeated quickly by repeatedly pressing
    the keys
  * Fixed various deadlocks when resuming from suspend or during
    device initialisation
  * Fixed devices not functioning during system boot requiring a
    daemon restart
- Refreshed ckb-next-use-run.patch

* Update to version 0.4.3
  Support for new devices:
  * Scimitar RGB Elite
  * Nightsword RGB
  Important bugfixes:
  * Fixed delay when shutting down with K95 RGB
  * Fixed freezing when updating indicator LEDs
  * Indicator LEDs are now more responsive when an animation is
    playing
  * GUI now starts hidden in tray on KDE
  * The pipe animation now works consistently between mode
    changes
  * The pipe animation now handles input commands sent in rapid
    succession before the device is updated
  * Input works on wayland again after recent updates
  * libgdx based games no longer crash on mouse input
  * Mouse settings are now correctly restored when resuming from
    suspend
  * Fixed a bug where some devices would not be initialised on
    daemon start and would require a replug
  * Fixed layouts for K68, K65, K63, M95
  New features:
  * Under X11 only, lights can now automatically turn off after
    a user-set time
  * Macros now loop when the key is held down
  * Macro UI has been redesigned and supports recording from non
    ckb-next managed keyboards
  * Modes can now be changed automatically based on the current
    focused application (X11/XWayland Only)
  * Translations are now supported
  Notes for packagers:
  * The systemd unit directory can be overriden with
  - DSYSTEMD_UNIT_INSTALL_DIR
  * libappindicator is no longer used
  * Minimum Qt version has been bumped up to 5.5.1 (xenial)
  * cmake now checks for quazip 1.0
  * The following new dependencies have been introduced: Qt5
    X11Extras, xcb, xcb-screensaver, xcb-ewmh, Qt5 translation
    tools, dbusmenu-qt5
- Refresh ckb-next-use-run.patch, ckb-next-systemd.patch and
  422.patch
- Drop ckb-next-gcc10.patch (merged upstream)

- Adjust ckb-next-systemd.patch to the change for %_libexecdir

- Add ckb-next-gcc10.patch

- %make_jobs is depricated replaced by %cmake_build
- Use %autosetup to simplify maintenance

- Update to version 0.4.2
  Support for new devices:
  * Harpoon RGB Pro
  * Ironclaw RGB
  Important bugfixes:
  * GUI no longer crashes if an animation has no keys set

- Update to version 0.4.1
  Important bugfixes:
  * Specified keyboard layout is no longer being reverted on
    restart
  * Pipe animation no longer quits if it can't read data
  * Media keys work again on the legacy K65
  * Daemon no longer crashes on quit on macOS
  * Devices are now re-activated after resume on Linux
  * Gradient animation no longer flickers with dithering enabled
  * HiDPI has been disabled by default due to screen resolution
    misdetection
  * Max DPI is now per-device
  * Extra words are now filtered from the device name
  * gpg2 is preferred over gpg for signature verification
  New features:
  * An uninstall button has been added for macOS users that
    allows complete uninstallation, including older versions
  * Life animation has a new transparent preset
  * Confirmation dialog boxes have been added when deleting
    profiles, modes, and animations
  * Animation preview now gets temporarily disabled while
    ckb-next is out of focus
  * Support for multiple animation paths has been added
  * Pollrate can now be changed through the GUI
  Notes for packagers:
  * Udev rules are now installed by default in /lib/udev/rules.d.
  * Udev rule installation path can be changed with
    UDEV_RULE_DIRECTORY in cmake
  * Init systems can manually be force-enabled with
    FORCE_INIT_SYSTEM in cmake
- Refreshed ckb-next-use-run.patch and ckb-next-systemd.patch

- Add 422.patch to fix animations dir (boo#1135528)

- Update to version 0.4.0
  Support for new devices:
  * K70 RGB MK.2 LP
  * M65 RGB Elite
  * M95 Legacy
  Important bugfixes:
  * ST100 now works on macOS properly
  * Strafe RGB MK.2 logo is mapped to the right LEDs, and media
    buttons are positioned correctly
  * A buffer overflow causing the daemon to crash or hang has
    been fixed
  * quickinstall can now run correctly with multibyte characters
    in the path
  * Rename now works correctly in the Profile Manager context
    menu
  * Animations with no presets no longer get loaded to prevent
    crashes
  * K70 Lux is now marked correctly as monochrome
  * ckb-next can be built again with Qt 5.2
  * Save to hardware now gets disabled in the context menu for
    unsupported devices
  * Settings backend has been changed to ini for macOS,
    preventing silent configuration data corruption
  * The K55, the ST100 and the Polaris now have working default
    profiles
  * A few cases that may cause the GUI to crash have been found
    and fixed
  * Blank animation names are no longer allowed
  New features:
  * GUI has gained a monochrome tray icon option
    (QSystemTrayIcon only)
  * Device brightness can be controlled by scrolling on the tray
    icon on Linux systems that support it (AppIndicator or KDE)
  * Profiles and modes can now be changed with the --profile and
  - -mode arguments passed to the GUI binary
  * New Conway's Game of Life animation
  * New 'snake' animation
  * New 'pipe' animation, allowing the user to send rgb data
    from external applications
  * Music Visualizer (mviz) is now supported on macOS, and has
    been reworked to function correctly
  * A --version argument has been added to the daemon
  Notes:
  * On Linux, the udev rule has been renamed and moved
  * On Linux, for builds with libappindicator, it can be force
    enabled/disabled by setting the CKB_NEXT_USE_APPINDICATOR
    environment variable
  * On Linux, libappindicator support is also enabled if the Qt
    platform theme is gtk2 (Useful for Unity on Ubuntu 19.04)
  * The restart command has been removed from the daemon
  * Threads are now named for easier debugging
  * Signal handler has been rewritten
  * A few unneeded packets are no longer being sent to M65 mice
  * Only Red channel data is being sent to monochrome devices
- Refreshed ckb-next-systemd.patch and ckb-next-udev.patch

- Trim filler wording from description.

- Update to version 0.3.2
  Important news:
  * This version fixes a major bug for the Scimitar Pro, causing
    the daemon to not properly interface with the mouse. This
    could require manually reflashing the mouse firmware if a
    firmware update was performed with 0.3.1 or earlier.
  * An updater has been created to more quickly push bugfixes to
    users, especially for those on macOS.
  * There is a new Space Invaders-like minigame that can be
    played as an animation, thanks to @mvladimirovich.
  Support for new devices:
  * Strafe RGB MK.2; by accidental omission from the previous
    release.
  * K66
  Important bugfixes:
  * The Scimitar Pro now defaults to v2.xx endpoints
  * The DPI LED on mice now changes in sniper mode
  * The GUI will warn if uinput cannot be loaded on Linux
  * The "Save to Hardware" button on the Scimitar and Glaive has
    been greyed out due to a current lack of support
  * Thanks to the efforts of @Kedstar99, the codebase compiles
    with much fewer warnings
  * Binding commands to wheels will now repeat properly
  * QuaZip is no longer required for daemon-only builds
  * KissFFT is now built as a static library
  * Symbolic links are now created in /dev/input/by-id for evdev
    users
  * Fixed a regression for devices using the legacy protocol
  Note for packagers:
  * If ckb-next is updated through a package management system,
    `-DDISABLE_UPDATER=1` should be passed to CMake
  version 0.3.1
  Support for new devices:
  * K70 RGB MK.2
  * K70 RGB MK.2 SE
  New major features:
  * The GUI now has a generate ckb-next-dev-detect report button
  Important bugfixes:
  * Rapidfire keyboards have a workaround on shutdown
  * Bugfix for independent X/Y DPI
  * The new Strafe NRGB has firmware updates now
  * The GUI pops up a warning when trying to bind the Windows
    key with Winlock enabled
  * The GUI now has a DPI indicator
  * The K68 NRGB winlock light now lights up
  * The GUI handles SIGINT/SIGTERM cleanly, avoiding stalled
    devices
  * Strafe sidelights now save state on GUI start
  * Original Strafe NRGB's sidelights now toggle correctly
  * ckb-next-dev-detect is now installed to the system and added
    to PATH
  version 0.3.0
  Support for new devices:
  * K55 RGB
  * K68 RGB
  * K90 Legacy
  * Katar RGB
  * Polaris RGB
  * ST100 RGB
  New major features:
  * Use URB Interrupts to read data from devices
  * Profile Import/Export
  * Keyboard Layout autodetection
  * CMake build system
  * Relocation of binaries
  * No single global layout for all devices in the GUI
  Important bugfixes:
  * Deadlock on daemon exit
  * Support for K95 Platinum profile switch key
  * Keymap corruption on the GUI
  * Pulseaudio GUI deadlock
  * Use udev to detect the appropriate endpoint max packet size
  * Ignore devices in BIOS mode
  * Disable save to hardware for unsupported devices
  * Keymap patches for K68
  * Workaround for linux kernel out-of-bounds write
  * Memory leaks on firmware update
  version 0.2.9
  Important changes:
  * Significantly lower CPU usage on idle
  * Add support for K95 Platinum
  * Add support for K68
  * Add support for (new) Strafe non-RGB
  * Add support for Glaive
  * Add support for Harpoon
  * Add support for Corsair firmware v3
  * Add support for pt\_br layout
  * Add support for Japanese layout
  * Add macro delays to the GUI
  * New FIRMWARE file structure
  * GUI warning when daemon is not running
  * udev rule to remove joystick tag
  * Dynamic keymap patching
  * Require Qt >=5.2
  * Numerous small fixes and improvements
  version 0.2.8
  * `ckb` is now `ckb-next`, __but the binaries will be renamed
    in `v0.2.9`__
  * Numerous PRs from `ckb` merged
    [\#4](https://github.com/mattanger/ckb-next/issues/4)
  * SIGSEGV when deleting copied profile is fixed
    [\#38](https://github.com/mattanger/ckb-next/issues/38)
  * `make debug` target on Linux is fixed
    [\#79](https://github.com/mattanger/ckb-next/issues/79)
  * Heat map animation issues fixed
    [\#30](https://github.com/mattanger/ckb-next/issues/30)
  * Compilation of the music visualizer fixed
    [\#21](https://github.com/mattanger/ckb-next/issues/21)
  * Hardware profile loading error on firmware 2.05 fixed
    [\#24](https://github.com/mattanger/ckb-next/pull/24)
  * Project's own firmware table created, signed and populated
    with new devices
    [\#60](https://github.com/mattanger/ckb-next/pull/60)
  * Arch Linux and Fedora/CentOS packages added
    [\#80](https://github.com/mattanger/ckb-next/pull/80)
    [\#5](https://github.com/mattanger/ckb-next/issues/5)
    [\#41](https://github.com/mattanger/ckb-next/pull/41)
- Dropped ckb-external-quazip.patch (no longer necessary)
- Refreshed ckb-use-var-run.patch as ckb-next-use-run.patch
- Added ckb-next-systemd.patch, ckb-next-no-cmake-modules.patch
  and ckb-next-udev.patch

- Update to version 0.2.6
- Use external quazip only when available
- Replaced ckb-fix-desktop-file.patch with %suse_update_desktop_file
- Replaced ckb-daemon-path.patch and ckb-animations-path.patch
  with macros for consistency.

- Add hicoler folder, too

- Fix icon folder

- Initial package
  * Use /var/run instead of /dev/input for communication with the
    daemon.
  * move the daemon and the animations into the libexec folder