ceph-iscsi-3.5+1679292226.g8769429-bp156.1.2

- Update to 3.5+1679292226.g8769429:
  + rbd-target-api: don't ignore controls on disk create (bsc#1208820)
- checkin.sh: default to ses7 branch

- Update to 3.5+1655410541.gf482c7a.
  + Improve werkzeug version checking (bsc#1198435)

- Update to 3.5+1647618797.gb7bc626.
  + ceph_iscsi_config: disable emulate_legacy_capacity (bsc#1179557)

- Update to 3.5+1638408991.g5341b5d
  + rbd unmap image when deleting target (bsc#1190772)
  + gwcli: add error handling path for config api request (#231)
  + rbd-target-api: misc fixing for disk API (#229)
  + iscsi: raise if the 'gateway.conf' config file doesn't exist (#228)
  + iscsi: write cert/key to temp files in mode 'w' to handle strings (#227)
  + Fix the default value for gateway_conf (#226)
  + Add a strip to ListSetting.Normalize (#220, bsc#1177100)
  + Make settings mon config key store aware (#217)
  + Rename blacklist to blocklist (#216)
  + Fix gateway creation crash in python3 (#196)
  + Report tcmu-runner device status (#210)
  + Fix list access violiation when load config (#200, bsc#1183028)
  + fix delete disk error when disk owner is not specified (#206)
  + Support specified gateway config name (#207)
  + spec: added dependency on ceph-common package (#201)

- Update to 3.4+1614165221.g78e33bb
  + Gateway fails to start when using SSL (bsc#1182611)

- Update to 3.4+1602850653.g9af452e
  + Support spaces on 'trusted_ip_list' (#220, bsc#1177100)

- Update to 3.4+1602668899.ga7b4d38
  + Update RBD supported features for SLE15-SP2 kernel (bsc#1177202)
  + Make settings mon config key store aware (#217)

- Update to 3.4+1589469085.ga007663
  + Add a config option to log to stderr (#186)
  + Don't store to config if create_target fails (#187)
  + Fixed numerous string format issues on errors paths (#189)

- Update to 3.4+1588266755.g4a5a2cb
  + Attempt to pull SSL crt and key's from mon config-key store (#173)

- Update to 3.4+1586869678.gf041d18
  + Allow target reconfigure without clients (bsc#1164571)
  + Fix ceph blacklist ls test (#171)
  + Always perform full deletion on local node (#170)
  + Fix crash during unblacklisting with python3 (#170)
  + Fix metrics crash if gw not setup yet (#170)
  + Fix keys() crash with python 3 (#168)
  + Add option to force deletion of unreachable gw (#156)
  + Fix next() crash with python 3 (#164)
  + Fix config upgrade from 2 to 3 (#162)
  + Fix ZeroDivisionError (#155)

- Update to 3.3+1573833100.g55d02da:
  + Allow explicit set LUN number and WWN (bsc#1145756)
  + Should be possible to use a single gateway (bsc#1155283)
  + Fix group disk add on python3
  + Fix crash when CephCluster fails to get Rados object

- Update to 3.3+1570534953.g93940a4:
  + spec/checkin.sh:
  * reinstate "BuildArch: noarch" for all distros except openSUSE (i.e.,
    including SLE, which does not allow arch change in a maintenance update)
  * "ExclusiveArch" on openSUSE only

- Update to 3.3+1569576525.g93940a4:
  + Validate kernel LIO controls type and value (bsc#1140491)
  + TPG lun_id persistence (bsc#1145618)
  + Target level CHAP authentication (bsc#1145617)

- Update to 3.2+1569497618.ga2b17e1:
  + incremental pre-Milestone1 build

- Update to 3.2+1568098374.g09c5205:
  + upstream 3.2 release
  * Always use host FQDN instead of shortname
  * Validate min/max value for target controls and rbd:user/tcmu-runner image
    controls (bsc#1140491)
  + checkin.sh:
  * add "sed" statements to reproduce Dominique Leuenberger's
    downstream-only mod from July 29, 2019 (see previous entry), so it
    doesn't get clobbered every time we run the script
  * add "sed" statement to collapse multiple newlines down to one

- Make package not noarch: it is not installable on archs where
  ceph is not being built. Copy the ExclusiveArch statement from
  ceph.spec.

- Update to 3.0+1560249372.g70ec7a9:
  + spec: drop python3-configshell-fb version guard

- Update to 3.0+1560181178.g3010fd7:
  + Fix config hash check validation
  + spec: fix rhel conditional blocks

- Update to 3.0+1559837868.g8be74cf:
  + spec: conflict only with lrbd <= 3.0 to ensure lrbd is not installed
    simultaneously with ceph-iscsi

- Update to 3.0+1559815396.g7aa8f7f:
  + Set 'SUSE' SCSI vendor (bsc#1136769)
  + Adds support for multiple IPs per gateway (bsc#1136757)
  + Do not allow lrbd to be installed simultaneously with ceph-iscsi
  + Temporary workaround to support ',' in configshell params (must be removed/reverted in the future, after configshell >= 1.1.f25 is available)
  + Fix problem deleting target with clients/disks
  + Removes the disk 'delete' command

- Update to 3.0+1558465738.g6a0a021:
  + If fqdn is enabled, "getfqdn" should be used instead of "gethostname"

- Update to 3.0+1558465738.g6a0a021:
  + If fqdn is enabled, "getfqdn" should be used instead of "gethostname"

- Update to 3.0+1557415271.g940ac86:
  + Fix race condition on target disk add (bsc#1134479)

- Update to 3.0+1556546618.g28a0e8a:
  + Should be possible to export config without targets
  + Prevent error getting the number of active sessions
  + Fix race condition in '_targetauth' config update
  + Fix error when trying to get client info from 'gwcli'

- Update to 3.0+1554735444.g63aceaf:
  + Adds endpoints:
  * /api/targetinfo/<target_iqn>
  * /api/gatewayinfo
  * /api/clientinfo/<target_iqn>/<client_iqn>
  + Fix upgrade from config v3 when 'controls' field is missing

- Update to 3.0+1553528639.g1149ac6:
  + '/settings' endpoint return required and support RBD features by backstore
  + Enable/disable 'demo_mode_write_protect' when enabling/disabling ACL authentication

- Update to 3.0+1553076762.g61c150a:
  + Gateway management fixes and features
  + regression: fix lun reconfigure failure

- Update to 3.0+1552644320.g118bce3:
  + Fix chap config update
  + Always use rados client name when connecting to Ceph cluster
  + spec: add python-configshell runtime dependency
  + gw: use client id when calling ceph shell command
  + Fix race condition after gateway creation
  + Misc target/acl reconfigure fixes

- Update to 3.0+1552304123.g67b0d30:
  + add support for 'rbd' backstore (Ricardo Marques)

- Update to 3.0+1551350485.g157b5fd:
  + refactor spec file for better Fedora/RHEL and Python 3 support (Ricardo Dias)
  + rados pool for storing configuration is now configurable (Ricardo Marques)
  + support for specifying the cluster client name (Ricardo Dias)

- Update to 3.0+1550592273.gda1fd9b:
  + Support for kernel LIO backstore (which is the default backstore on SES6)
    (Ricardo Marques)
  + Disable OS, and package version checks (Ricardo Marques)

- checkin.sh: append git SHA1 to version number

- Update to 3.0+1549277704:
  + based on upstream master SHA1 17023339c03f8a8ad289db7689f6d6424c2b860f
  * packaging: Move python unbuffered option to systemd unit file
    (bsc#1123070)

- checkin.sh: ensure tarballs are uniquely named

- multiple iSCSI target support (Ricardo Marques)

- migrate from python3-pycrypto to python3-cryptography
  (Ricardo Dias)

- spec: use correct package name for python3-Flask dependency

- Add support for Python3 (Ricardo Marques)

- Initial commit, based on SUSE/ceph-iscsi.git branch "ses6",
  SHA1 9c04ed0c3fe7a9ad057b3bb676f5f07cf97270fc
  (upstream 0b9046105d900ca03249d044ce759c12efa5a016)