borgmatic-1.7.5-bp155.1.6

- Add patch to reduce the requirement of python 3.7 to work with
  python 3.6 so borgmatic can be used in Leap 15.5 . All the tests
  work fine so it seems python 3.7 isn't really required:
  * support-python3.6.patch

- Update to 1.7.5:
  * #463: Add "before_actions" and "after_actions" command hooks that run before/after all the
  actions for each repository. These new hooks are a good place to run per-repository steps like
  mounting/unmounting a remote filesystem.
  * #463: Update documentation to cover per-repository configurations:
  https://torsion.org/borgmatic/docs/how-to/make-per-application-backups/
  * #557: Support for Borg 2 while still working with Borg 1. This includes new borgmatic actions
  like "rcreate" (replaces "init"), "rlist" (list archives in repository), "rinfo" (show repository
  info), and "transfer" (for upgrading Borg repositories). For the most part, borgmatic tries to
  smooth over differences between Borg 1 and 2 to make your upgrade process easier. However, there
  are still a few cases where Borg made breaking changes. See the Borg 2.0 changelog for more
  information: https://www.borgbackup.org/releases/borg-2.0.html
  * #557: If you install Borg 2, you'll need to manually upgrade your existing Borg 1 repositories
  before use. Note that Borg 2 stable is not yet released as of this borgmatic release, so don't
  use Borg 2 for production until it is! See the documentation for more information:
  https://torsion.org/borgmatic/docs/how-to/upgrade/#upgrading-borg
  * #557: Rename several configuration options to match Borg 2: "remote_rate_limit" is now
  "upload_rate_limit", "numeric_owner" is "numeric_ids", and "bsd_flags" is "flags". borgmatic
  still works with the old options.
  * #557: Remote repository paths without the "ssh://" syntax are deprecated but still supported for
  now. Remote repository paths containing "~" are deprecated in borgmatic and no longer work in
  Borg 2.
  * #557: Omitting the "--archive" flag on the "list" action is deprecated when using Borg 2. Use
  the new "rlist" action instead.
  * #557: The "--dry-run" flag can now be used with the "rcreate"/"init" action.
  * #565: Fix handling of "repository" and "data" consistency checks to prevent invalid Borg flags.
  * #566: Modify "mount" and "extract" actions to require the "--repository" flag when multiple
  repositories are configured.
  * #571: BREAKING: Remove old-style command-line action flags like "--create, "--list", etc. If
  you're already using actions like "create" and "list" instead, this change should not affect you.
  * #571: BREAKING: Rename "--files" flag on "prune" action to "--list", as it lists archives, not
  files.
  * #571: Add "--list" as alias for "--files" flag on "create" and "export-tar" actions.
  * Add support for disabling TLS verification in Healthchecks monitoring hook with "verify_tls"
  option.
  * #381: BREAKING: Greatly simplify configuration file reuse by deep merging when including common
  configuration. See the documentation for more information:
  https://torsion.org/borgmatic/docs/how-to/make-per-application-backups/#include-merging
  * #473: BREAKING: Instead of executing "before" command hooks before all borgmatic actions run (and
  "after" hooks after), execute these hooks right before/after the corresponding action. E.g.,
  "before_check" now runs immediately before the "check" action. This better supports running
  timing-sensitive tasks like pausing containers. Side effect: before/after command hooks now run
  once for each configured repository instead of once per configuration file. Additionally, the
  "repositories" interpolated variable has been changed to "repository", containing the path to the
  current repository for the hook. See the documentation for more information:
  https://torsion.org/borgmatic/docs/how-to/add-preparation-and-cleanup-steps-to-backups/
  * #513: Add mention of sudo's "secure_path" option to borgmatic installation documentation.
  * #515: Fix "borgmatic borg key ..." to pass parameters to Borg in the correct order.
  * #516: Fix handling of TERM signal to exit borgmatic, not just forward the signal to Borg.
  * #517: Fix borgmatic exit code (so it's zero) when initial Borg calls fail but later retries
  succeed.
  * Change Healthchecks logs truncation size from 10k bytes to 100k bytes, corresponding to that
  same change on Healthchecks.io.

- python-six is not required
  https://trello.com/c/MO53MocR/143-remove-python3-six

- update to 1.5.24:
  * #431: Add "working_directory" option to support source directories with relative paths.
  * #444: When loading a configuration file that is unreadable due to file permissions, warn instead
    of erroring. This supports running borgmatic as a non-root user with configuration in ~/.config
    even if there is an unreadable global configuration file in /etc.
  * #469: Add "repositories" context to "before_" and "after_" command action hooks. See the
    documentation for more information:
    https://torsion.org/borgmatic/docs/how-to/add-preparation-and-cleanup-steps-to-backups/
  * #486: Fix handling of "patterns_from" and "exclude_from" options to error instead of warning when
    referencing unreadable files and "create" action is run.
  * #507: Fix Borg usage error in the "compact" action when running "borgmatic --dry-run". Now, skip
    "compact" entirely during a dry run.
  * #394: Compact repository segments and free space with new "borgmatic compact" action. Borg 1.2+
    only. Also run "compact" by default when no actions are specified, as "prune" in Borg 1.2 no
    longer frees up space unless "compact" is run.
  * #394: When using the "atime", "bsd_flags", "numeric_owner", or "remote_rate_limit" options,
    tailor the flags passed to Borg depending on the Borg version.
  * #480, #482: Fix traceback when a YAML validation error occurs.
  * #288: Add database dump hook for MongoDB.
  * #470: Move mysqldump options to the beginning of the command due to MySQL bug 30994.
  * #471: When command-line configuration override produces a parse error, error cleanly instead of
    tracebacking.
  * #476: Fix unicode error when restoring particular MySQL databases.
    Drop support for Python 3.6, which has been end-of-lifed.
    Add support for Python 3.10.
- avoid bashism in post scripts (bsc#1195391)
- light modernization of spec file

- Update 1.5.21 which is last that supports Python 3.6
  * #28: Optionally retry failing backups via "retries" and "retry_wait" configuration options.
  * #306: Add "list_options" MySQL configuration option for passing additional arguments to MySQL
    list command.
  * #459: Add support for old version (2.x) of jsonschema library.
  * #387: Fix error when configured source directories are not present on the filesystem at the time
    of backup. Now, Borg will complain, but the backup will still continue.
  * #455: Mention changing borgmatic path in cron documentation.
    Update sample systemd service file with more granular read-only filesystem settings.
  * Move Gitea and GitHub hosting from a personal namespace to an organization for better
    collaboration with related projects.
  * #389: Fix "message too long" error when logging to rsyslog.
  * #440: Fix traceback that can occur when dumping a database.

- ExcludeArch %ix86: this is a bit a special trick, but as there is
  no pandoc for intel/i586 arch, we can't build there anyway. As
  the resulting package is noarch though, it does not matter much.

- Update to 1.5.17
  * Fix error when configuration file contains "umask" option.
  * Remove test dependency on vim and /dev/urandom.
- Update to 1.5.16
  * Suppress console output in sample crontab and
    systemd service files.
  * Fix syslog logging on FreeBSD.
  * Fix hang when restoring a PostgreSQL "tar" format database dump.
  * Better error messages! Switch the library used
    for validating configuration files
  * Link borgmatic Ansible role from installation documentation:

- Update to 1.5.15
  * Document use case of running backups conditionally based on
    laptop power level
  * Run arbitrary Borg commands with new "borgmatic borg" action

- Update to 1.5.14:
  * Add link to Hetzner storage offering from the documentation.
  * Clarify canonical home of borgmatic in documentation.
  * Clarify that spaces in path names should not be backslashed
    in path names.
  * Fix error handling to error loudly when Borg gets killed due to
    running out of memory!
  * Fix build so as not to attempt to build and push documentation
    for a non-master branch.

- Update to 1.5.13:
  * #373: Document that passphrase is used for Borg keyfile encryption,
    not just repokey encryption.
  * #404: Add support for ruamel.yaml 0.17.x YAML parsing library.
  * Update systemd service example to return a permission error when
    a system call isn't permitted
    (instead of terminating borgmatic outright).
  * Drop support for Python 3.5, which has been end-of-lifed.
  * Add support for Python 3.9.
  * Only support black code formatter on Python 3.8+.
- Drop 0001-Update-versions-of-test-dependencies.patch
- Rebase skip-tests.patch

- Update to 1.5.5
  * #314: Fix regression in support for PostgreSQL's "directory" dump format. Unlike other dump
    formats, the "directory" dump format does not stream directly to/from Borg.
  * #315: Fix enabled database hooks to implicitly set one_file_system configuration option to true.
  * This prevents Borg from reading devices like /dev/zero and hanging.
  * #316: Fix hang when streaming a database dump to Borg with implicit duplicate source directories
    by deduplicating them first.
  * #319: Fix error message when there are no MySQL databases to dump for "all" databases.
  * Improve documentation around the installation process. Specifically, making borgmatic commands
    runnable via the system PATH and offering a global install option.
- Update to 1.5.4
  * #310: Fix legitimate database dump command errors (exit code 1) not being treated as errors by
    borgmatic.
  * For database dumps, replace the named pipe on every borgmatic run. This prevent hangs on stale
    pipes left over from previous runs.
  * Fix error handling to handle more edge cases when executing commands.
- Update to 1.5.3
  * #258: Stream database dumps and restores directly to/from Borg without using any additional
    filesystem space. This feature is automatic, and works even on restores from archives made with
    previous versions of borgmatic.
  * #293: Documentation on macOS launchd permissions issues with work-around for Full Disk Access.
  * Remove "borgmatic restore --progress" flag, as it now conflicts with streaming database restores.
- Update to 1.5.2
  * #301: Fix MySQL restore error on "all" database dump by excluding system tables.
  * Fix PostgreSQL restore error on "all" database dump by using "psql" for the restore instead of
    "pg_restore".
- Add skip-tests.patch

- Comment the LogRateLimitIntervalSec option in the systemd service
  when building for SLE/Leap since systemd < 240 doesn't support it.

- Remove unneeded build dependency python-black and python-devel
- Reduce the required python-colorama version since a newer
  version is not really needed.

- Add patch to remove invalid test:
  * remove-invalid-test.patch

- Use `python3 -m venv` instead of invoking pyvenv which doesn't seem
  to exist anymore with python 3.8.

- Fix execution path in borgmatic.service

- Update to 1.5.1
  * #289: Tired of looking up the latest successful archive name in
  order to pass it to borgmatic actions? Me too. Now you can
  specify "--archive latest" to all actions that accept an archive
  flag.
  * 290: Fix the "--stats" and "--files" flags so that they yield
  output at verbosity 0.
  * Reduce the default verbosity of borgmatic logs sent to
  Healthchecks monitoring hook. Now, it's warnings and errors
  only. You can increase the verbosity via the
  "--monitoring-verbosity" flag.
  * Add security policy documentation in SECURITY.md.

- Update to 1.5.0
  * #245: Monitor backups with PagerDuty hook integration. See the
  documentation for more information:
  https://torsion.org/borgmatic/docs/how-to/monitor-your-backups/#pagerduty-hook
  * #255: Add per-action hooks: "before_prune", "after_prune",
  "before_check", and "after_check".
  * #274: Add ~/.config/borgmatic.d as another configuration
  directory default.
  * #277: Customize Healthchecks log level via borgmatic
  "--monitoring-verbosity" flag.
  * #280: Change "exclude_if_present" option to support multiple
  filenames that indicate a directory should be excluded from
  backups, rather than just a single filename.
  * #284: Backup to a removable drive or intermittent server via
  "soft failure" feature. See the documentation for more
  information:
  https://torsion.org/borgmatic/docs/how-to/backup-to-a-removable-drive-or-an-intermittent-server/
  * #287: View consistency check progress via "--progress" flag for
  "check" action. For "create" and "prune" actions, no longer list
  files or show detailed stats at any verbosities by default. You
  can opt back in with "--files" or "--stats" flags. For "list"
  and "info" actions, show repository names even at verbosity 0.

- Update to 1.4.2
  * Extract files to a particular directory via "borgmatic extract --destination" flag.
  * Rename "borgmatic extract --restore-path" flag to "--path" to reduce confusion with the separate
  "borgmatic restore" action. Any uses of "--restore-path" will continue working.
- Update to 1.4.1
  * #229: Restore backed up PostgreSQL databases via "borgmatic restore" action. See the
  documentation for more information:
  https://torsion.org/borgmatic/docs/how-to/backup-your-databases/
  * Documentation on how to develop borgmatic's documentation:
  https://torsion.org/borgmatic/docs/how-to/develop-on-borgmatic/#documentation-development
- Update to 1.4.0
  * #225: Database dump hooks for PostgreSQL, so you can easily dump your databases before backups
  run.
  * #230: Rename "borgmatic list --pattern-from" flag to "--patterns-from" to match Borg.
- Update to 1.3.26
  * #224: Fix "borgmatic list --successful" with a slightly better heuristic for listing successful
  (non-checkpoint) archives.
- Update to 1.3.25
  * #223: Dead man's switch to detect when backups start failing silently, implemented via
  healthchecks.io hook integration. See the documentation for more information:
  https://torsion.org/borgmatic/docs/how-to/monitor-your-backups/#healthchecks-hook
  * Documentation on monitoring and alerting options for borgmatic backups:
  https://torsion.org/borgmatic/docs/how-to/monitor-your-backups/
  * Automatically rewrite links when developing on documentation locally.
- Update to 1.3.24
  * #86: Add "borgmatic list --successful" flag to only list successful (non-checkpoint) archives.
  * Add a suggestion form to all documentation pages, so users can submit ideas for improving the
  documentation.
  * Update documentation link to community Arch Linux borgmatic package.
- Update to 1.3.23
  * #174: More detailed error alerting via runtime context available in "on_error" hook.
- Update to 1.3.22
  * #144: When backups to one of several repositories fails, keep backing up to the other
  repositories and report errors afterwards.
- Update to 1.3.21
  * #192: User-defined hooks for global setup or cleanup that run before/after all actions. See the
  documentation for more information:
  https://torsion.org/borgmatic/docs/how-to/add-preparation-and-cleanup-steps-to-backups/
- Update to 1.3.20
  * #205: More robust sample systemd service: boot delay, network dependency, lowered CPU/IO
  priority, etc.
  * #221: Fix "borgmatic create --progress" output so that it updates on the console in real-time.
- Update to 1.3.19
  * #219: Fix visibility of "borgmatic prune --stats" output.
- Update to 1.3.18
  * #220: Fix regression of argument parsing for default actions.
- Update to 1.3.17
  * #217: Fix error with "borgmatic check --only" command-line flag with "extract" consistency check.
- Update to 1.3.16
  * #210: Support for Borg check --verify-data flag via borgmatic "data" consistency check.
  * #210: Override configured consistency checks via "borgmatic check --only" command-line flag.
  * When generating sample configuration with generate-borgmatic-config, add a space after each "#"
  comment indicator.
- Update to 1.3.15
  * #208: Fix for traceback when the "checks" option has an empty value.
  * #209: Bypass Borg error about a moved repository via "relocated_repo_access_is_ok" option in
  borgmatic storage configuration section.
  * #213: Reorder arguments passed to Borg to fix duplicate directories when using Borg patterns.
  * #214: Fix for hook erroring with exit code 1 not being interpreted as an error.

- BuildRequire pkgconfig(libsystemd) instead of systemd-devel:
  Allow OBS to shortcut through the -mini flavors.

- Fix regexes in spec file now that upstream changed the default borgmatic
  location in the cron and systemd sample files, so we replace them correctly
  with the /usr/bin locations we need for borgmatic to be found.
- Add missing python3-colorama runtime dependency

- Update to 1.3.14
  * #204: Do not treat Borg warnings (exit code 1) as failures.
  * When validating configuration files, require strings instead of allowing any scalar type.
- Update to 1.3.13
  * #199: Add note to documentation about using spaces instead of tabs for indentation, as YAML does
  not allow tabs.
  * #203: Fix compatibility with ruamel.yaml 0.16.x.
  * If a "prefix" option in borgmatic's configuration has an empty value (blank or ""), then disable
  default prefix.
- Update to 1.3.12
  * Only log to syslog when run from a non-interactive console (e.g. a cron job).
  * Remove unicode byte order mark from syslog output so it doesn't show up as a literal in rsyslog
  output. See discussion on #197.
- Update to 1.3.11
  * #193: Pass through several "borg list" and "borg info" flags like --short, --format, --sort-by,
  - -first, --last, etc. via borgmatic command-line flags.
  * Add borgmatic info --repository and --archive command-line flags to display info for individual
  repositories or archives.
  * Support for Borg --noatime, --noctime, and --nobirthtime flags via corresponding options in
  borgmatic configuration location section.
- Update to 1.3.10
  * #198: Fix for Borg create error output not showing up at borgmatic verbosity level zero.
- Update to 1.3.9
  * #195: Switch to command-line actions as more traditional sub-commands, e.g. "borgmatic create",
  "borgmatic prune", etc. However, the classic dashed options like "--create" still work!
- Update to 1.3.8
  * #191: Disable console color via "color" option in borgmatic configuration output section.
- Update to 1.3.7
  * #196: Fix for unclear error message for invalid YAML merge include.
  * #197: Don't color syslog output.
  * Change default syslog verbosity to show errors only.
- Update to 1.3.6
  * #53: Log to syslog in addition to existing console logging. Add --syslog-verbosity flag to
  customize the log level. See the documentation for more information:
  https://torsion.org/borgmatic/docs/how-to/inspect-your-backups/
  * #178: Look for .yml configuration file extension in addition to .yaml.
  * #189: Set umask used when executing hooks via "umask" option in borgmatic hooks section.
  * Remove Python cache files before each Tox run.
  * Add #borgmatic Freenode IRC channel to documentation.
  * Add Borg/borgmatic hosting providers section to documentation.
  * Add files for building documentation into a Docker image for web serving.
  * Upgrade project build server from Drone 0.8 to 1.1.
  * Build borgmatic documentation during continuous integration.
  * We're nearly at 500 ?s on GitHub. We can do this!
- Update to 1.3.5
  * #153: Support for various Borg directory environment variables (BORG_CONFIG_DIR, BORG_CACHE_DIR,
  etc.) via options in borgmatic's storage configuration.
  * #177: Fix for regression with missing verbose log entries.
- Update to 1.3.4
  * Part of #125: Color borgmatic (but not Borg) output when using an interactive terminal.
  * #166: Run tests for all installed versions of Python.
  * #168: Update README with continuous integration badge.
  * #169: Automatically sort Python imports in code.
  * Document installing borgmatic with pip install --user instead of a system Python install.
  * Get more reproducible builds by pinning the versions of pip and tox used to run tests.
  * Factor out build/test configuration from tox.ini file.
- Update to 1.3.3
  * Add validate-borgmatic-config command, useful for validating borgmatic config generated by
  configuration management or even edited by hand.
- Update to 1.3.2
  * #160: Fix for hooks executing when using --dry-run. Now hooks are skipped during a dry run.

- Update to 1.3.1
  * #155: Fix for invalid JSON output when using multiple borgmatic configuration files.
  * #157: Fix for seemingly random filename ordering when running through a directory of
    configuration files.
  * Fix for empty JSON output when using --create --json.
  * Now capturing Borg output only when --json flag is used. Previously, borgmatic delayed Borg
    output even without the --json flag.
- Update to 1.3.0
  * #148: Configuration file includes and merging via "!include" tag to support reuse of common
    options across configuration files.
- Update to 1.2.18
  * #147: Support for Borg create/extract --numeric-owner flag via "numeric_owner" option in
    borgmatic's location section.
- Update to 1.2.17
  * #140: List the files within an archive via --list --archive option.
- Update to 1.2.16
  * #119: Include a sample borgmatic configuration file in the documentation.
  * #123: Support for Borg archive restoration via borgmatic --extract command-line flag.
  * Refactor documentation into multiple separate pages for clarity and findability.
  * Organize options within command-line help into logical groups.
  * Exclude tests from distribution packages.
- Update to 1.2.15
  * #127: Remove date echo from schema example, as it's not a substitute for real logging.
  * #132: Leave exclude_patterns glob expansion to Borg, since doing it in borgmatic leads to
    confusing behavior.
  * #136: Handle and format validation errors raised during argument parsing.
  * #138: Allow use of --stats flag when --create or --prune flags are implied.

- Update to 1.2.14
  * When generating sample configuration with generate-borgmatic-config,
    document the defaults for each option.
  * When running multiple configuration files, attempt all configuration
    files even if one of them errors. Log a summary of results at the end.
  * Add borgmatic --version command-line flag to get the current installed
    version number.
- Update to 1.2.13
  * Support for --stats command-line flag independent of --verbosity.
  * With borgmatic --init command-line flag, proceed without erroring if a
    repository already exists.
- Update to 1.2.12
  * Support for Borg repository initialization via borgmatic --init
    command-line flag.
  * Update Borg create --filter values so a dry run lists files to back up.
  * Update README with link to a new/forked Docker image.
  * Prevent deprecated --excludes command-line option from being used.
  * Refactor README a bit to flow better for first-time users.
  * Update README with a few additional borgmatic packages (Debian and Ubuntu).
- Update to 1.2.11
  * Support for Borg create --progress via borgmatic command-line flag.
- Update to 1.2.10
  * Support for Borg --chunker-params create option via "chunker_params"
    in borgmatic's storage section.
- Update to 1.2.9
  * Fix for syntax error that occurred in Python 3.5 and below.
  * Make automated tests support running in Python 3.5.
- Update to 1.2.8
  * Enable consistency checks for only certain repositories via
    "check_repositories" option in borgmatic's consistency
    configuration. Handy for large repositories that take forever to check.
  * Include link to issue tracker within various command output.
  * Run continuous integration tests on a matrix of Python and Borg
    versions.
- Update to 1.2.7
  * Support for Borg --keep-secondly prune option.
  * Use Black code formatter and Flake8 code checker as part of running
    automated tests.
  * Add an end-to-end automated test that actually integrates with Borg.
  * Set up continuous integration for borgmatic automated tests
- Update to 1.2.6
  * Fix generated configuration to also include a "keep_daily" value so
    pruning works out of the box.
- Update to 1.2.5
  * Fix various warnings.
- Update to 1.2.4
  * Bump version.
- Update to 1.2.3
  * Set to release version.

- Update to 1.2.2
  * #85: Fix compatibility issue between pykwalify and ruamel.yaml 0.15.52, which manifested in
  borgmatic as a pykwalify RuleError.
- Update to 1.2.1
  * Skip before/after backup hooks when only doing --prune, --check, --list, and/or --info.
  * #71: Support for XDG_CONFIG_HOME environment variable for specifying alternate user ~/.config/
  path.
  * #74, #83: Support for Borg --json option via borgmatic command-line to --list archives or show
  archive --info in JSON format, ideal for programmatic consumption.
  * #38, #76: Upgrade ruamel.yaml compatibility version range and fix support for Python 3.7.
  * #77: Skip non-"*.yaml" config filenames in /etc/borgmatic.d/ so as not to parse backup files,
  editor swap files, etc.
  * #81: Document user-defined hooks run before/after backup, or on error.
  * Add code style guidelines to the documention.

- Use %{version} in the Source line instead of explicitly writing it.
- Use %license for LICENSE and change the license in the spec file to
  GPL-3.0-only

- update to 1.2.0
  * #61: Support for Borg --list option via borgmatic command-line to list all archives.
  * #61: Support for Borg --info option via borgmatic command-line to display summary information.
  * #62: Update README to mention other ways of installing borgmatic.
  * Support for Borg --prefix option for consistency checks via "prefix" option in borgmatic's
  consistency configuration.
  * Add introductory screencast link to documentation.
  * #59: Ignore "check_last" and consistency "prefix" when "archives" not in consistency checks.
  * #60: Add "Persistent" flag to systemd timer example.
  * #63: Support for Borg --nobsdflags option to skip recording bsdflags (e.g. NODUMP, IMMUTABLE) in
  archive.
  * #69: Support for Borg prune --umask option using value of existing "umask" option in borgmatic's
  storage configuration.
  * Update tox.ini to only assume Python 3.x instead of Python 3.4 specifically.
  * Add ~/.config/borgmatic/config.yaml to default configuration path probing.
  * Document how to develop on and contribute to borgmatic.

- Update to 1.5.12
  * Fix for previous release with incorrect version suffix in
    setup.py. No other changes.
- Update to 1.5.11
  * #341: Add "temporary_directory" option for changing Borg's
    temporary directory.
  * #352: Lock down systemd security settings in sample systemd
    service file.
  * #355: Fix traceback when a database hook value is null in
    a configuration file.
  * #361: Merge override values when specifying the "--override"
    flag multiple times. The previous behavior was to take the
    value of the last "--override" flag only.
  * #367: Fix traceback when upgrading old INI-style configuration
    with upgrade-borgmatic-config.
  * #368: Fix signal forwarding from borgmatic to Borg resulting
    in recursion traceback.
  * #369: Document support for Borg placeholders in repository
    names.
- Replace patch:
  * remove-invalid-test.patch
  with patch from upstream that fixes tests:
  * 0001-Update-versions-of-test-dependencies.patch

- Update to 1.5.10
  * #347: Add hooks that run for the "extract" action:
    "before_extract" and "after_extract".
  * #350: Fix traceback when a configuration directory is
    non-readable due to directory permissions.
  * Add documentation navigation links on left side of all
    documentation pages.
  * Clarify documentation on configuration overrides, specifically
    the portion about list syntax:
    http://torsion.org/borgmatic/docs/how-to/make-per-application-backups/#configuration-overrides
  * Clarify documentation overview of monitoring options:
    http://torsion.org/borgmatic/docs/how-to/monitor-your-backups/

- Update to 1.5.9
  * #300: Add “borgmatic export-tar” action to export an archive to
    a tar-formatted file or stream.
  * #339: Fix for intermittent timing-related test failure of
    logging function.
  * Clarify database documentation about excluding named pipes and
    character/block devices to prevent hangs.

- Update to 1.5.8
  * #336: Fix for traceback when running Cronitor, Cronhub, and
    PagerDuty monitor hooks.
- Update to 1.5.7
  * #327: Fix broken pass-through of BORG_* environment variables
    to Borg.
  * #328: Fix duplicate logging to Healthchecks and send "after_*"
    hooks output to Healthchecks.
  * #331: Add SSL support to PostgreSQL database configuration.
  * #333: Fix for potential data loss (data not getting backed up)
    when borgmatic omitted configured source directories in certain
    situations. Specifically, this occurred when two source
    directories on different filesystems were related by parentage
    (e.g. "/foo" and "/foo/bar/baz") and the one_file_system option
    was enabled.
  * Update documentation code fragments theme to better match the
    rest of the page.
  * Improve configuration reference documentation readability via
    more aggressive word-wrapping in configuration schema
    descriptions.

- Update to 1.5.6
  * #292: Allow before_backup and similiar hooks to exit with a
    soft failure without altering the monitoring status on
    Healthchecks or other providers. Support this by waiting to
    ping monitoring services with a "start" status until after
    before_* hooks finish. Failures in before_* hooks still trigger
    a monitoring "fail" status.
  * #316: Fix hang when a stale database dump named pipe from an
    aborted borgmatic run remains on disk.
  * #323: Fix for certain configuration options like ssh_command
    impacting Borg invocations for separate configuration files.
  * #324: Add "borgmatic extract --strip-components" flag to remove
    leading path components when extracting an archive.
  * Tweak comment indentation in generated configuration file for
    clarity.
  * Link to Borgmacator GNOME AppIndicator from monitoring
    documentation.

- Use README.md form source
- Add borgmatic.d folder in /etc for config files
- Update to 1.1.15
  * Support for Borg BORG_PASSCOMMAND environment variable to read a password from an external file.
  * Fix for Borg create error when using borgmatic's --dry-run and --verbosity options together.
  Work-around for behavior introduced in Borg 1.1.3: https://github.com/borgbackup/borg/issues/3298
  * #55: Fix for missing tags/releases on Gitea and GitHub project hosting.
  * #56: Support for Borg --lock-wait option for the maximum wait for a repository/cache lock.
  * #58: Support for using tilde in exclude_patterns to reference home directory.

- Removed _service file. Borgmatic uses to have frequent releases these days.
- Update to 1.1.14
  * Fix for typo in --patterns-from option.
  * Support for Borg --dry-run option via borgmatic command-line.
- Update to 1.1.13
  * Fix for incorrect consistency check flags passed to Borg when all three checks ("repository",
    "archives", and "extract") are specified in borgmatic configuration.
  * Add "local_path" to configuration for specifying an alternative Borg executable path.
  * Support for Borg experimental --patterns-from and --patterns options for specifying mixed
    includes/excludes.
  * Moved issue tracker from Taiga to integrated Gitea tracker at
    https://projects.torsion.org/witten/borgmatic/issues
- Update to 1.1.12
  * Declare dependency on pykwalify 1.6 or above, as older versions yield "Unknown key: version"
    rule errors.
  * Support for Borg --keep-minutely prune option.
- Update to 1.1.11
  * Add "ssh_command" to configuration for specifying a custom SSH command or options.
  * Fix for incorrect /etc/borgmatic.d/ configuration path probing on macOS. This problem manifested
    as an error on startup: "[Errno 2] No such file or directory: '/etc/borgmatic.d'".
- Update to 1.1.10
  * Pass several Unix signals through to child processes like Borg. This means that Borg now properly
    shuts down if borgmatic is terminated (e.g. due to a system suspend).
  * Support for using tilde in repository paths to reference home directory.
  * Support for Borg --files-cache option for setting the files cache operation mode.
  * Support for Borg --remote-ratelimit option for limiting upload rate.
  * Log invoked Borg commands when at highest verbosity level.

- Upstream moved from mercurial to git, so updated _service accordingly,
  updated source code to 6e9e7c4 and set all services mode to disabled.
- Fixed a too restrictive python3-ruamel.yaml version requirement
  in the source code
- Add a rcborgmatic symlink as required by the suse-missing-rclink rpmlint check

- Update to 1.1.9dev0-201
  * #29: Support for using tilde in source directory path to reference home directory.
- python3-ruamel.yaml and python3-pykwalify are now required
- Update to 1.1.8
  * #39: Fix to make /etc/borgmatic/config.yaml optional rather than required when using the default
    config paths.
- Update to 1.1.7
  * #28: Add "archive_name_format" to configuration for customizing archive names.
  * Fix for traceback when "exclude_from" value is empty in configuration file.
  * When pruning, make highest verbosity level list archives kept and pruned.
  * Clarification of Python 3 pip usage in documentation.
- Update to 1.1.6
  * #12, #35: Support for Borg --exclude-from, --exclude-caches, and --exclude-if-present options.
- Update to 1.1.5
  * #34: New "extract" consistency check that performs a dry-run extraction of the most recent
    archive.
- Update to 1.1.4
  * #17: Added command-line flags for performing a borgmatic run with only pruning, creating, or
    checking enabled. This supports use cases like running consistency checks from a different cron
    job with a different frequency, or running pruning with a different verbosity level.
- Update to 1.1.3
  * #14: Support for running multiple config files in /etc/borgmatic.d/ from a single borgmatic run.
  * Fix for generate-borgmatic-config writing config with invalid one_file_system value.
- Update to 1.1.2
  * #32: Fix for passing check_last as integer to subprocess when calling Borg.
- Update to 1.1.1
  * Part of #32: Fix for upgrade-borgmatic-config converting check_last option as a string instead of
    an integer.
  * Fix for upgrade-borgmatic-config erroring when consistency checks option is not present.
- Update to 1.1.0
  * Switched config file format to YAML. Run upgrade-borgmatic-config to upgrade.
  * Added generate-borgmatic-config command for initial config creation.
  * Dropped Python 2 support. Now Python 3 only.
  * #18: Fix for README mention of sample files not included in package.
  * #22: Sample files for triggering borgmatic from a systemd timer.
  * Support for backing up to multiple repositories.
  * To free up space, now pruning backups prior to creating a new backup.
  * Enabled test coverage output during tox runs.
  * Added logo.

- Edited %files to clear unpackaged files builderror in
  openSUSE:Factory

- Trim and wrap description

- version 1.0.3-dev: initial build