Update Info

openSUSE-2020-762


Recommended update for shorewall


Type: recommended
Severity: moderate
Issued: 2020-06-03
Description:
This update for shorewall to 5.2.4.4 fixes the following issues:

- Update to bugfix version 5.2.4.4
  + When DYNAMIC_BLACKLIST=ipset... or when SAVE_IPSETS=Yes in
    shorewall[6].conf, 'shorewall[6] start' could hang. Fixed.
  + 'shorewall[6] start' would not automatically create dynamic
    blacklisting ipsets. That has been corrected.

- Update to version 5.2.4.2
  https://shorewall.org/pub/shorewall/5.2/shorewall-5.2.4/releasenotes.txt
- Update to version 5.2.4.1
  + Fixes for openSUSE shorewall-init
  will now ignore 'start' and 'stop' commands, for running firewalls
  + Spurious messages have been removed

- To fix boo#1166114 never restart shorewall-init.service
  macro service_del_postun is replaced by simpler systemd_postun
- Remove conflict between main and lite package.
  A managing station need main to build configuration and can use
  -lite to execute it. Users are in charge of choosing which
  service has to be started and used.

- Update to version 5.2.4
  https://shorewall.org/pub/shorewall/5.2/shorewall-5.2.4/releasenotes.txt
  + Previously, when a Shorewall6 firewall was placed into the
    'stopped' state, ICMP6 packets required by RFC 4890 were not
    automatically accepted by the generated ruleset.
    Beginning with this release, those packets are automatically
    accepted.
  + Previously, the output of 'shorewall[6] help' displayed the
    superseded 'load' command. That text has been deleted.
  + The QOSExample.html file in the documentation and on the web site
    previously showed tcrules content for the /etc/shorewall/mangle
    file (recall that 'mangle' superseded 'tcrules'). That page has
    been corrected.
  + The 'Starting and Stopping' and 'Configuration file basics'
    documents have been updated to align them with the current product
    behavior.
  +  The 'ipsets' document has been updated to clarify the use of
    ipsets in the stoppedrules file.
- Packaging
  + shorewall-init package has a removed %service_del_postun
    macro to close bug boo#1166114 Restarting this service can
    lock down admin out of the system.
  + shorewall(6) and shorewall(6)-lite conflict has they shouldn't
    be installed together on the same system.

- Add version to requires in -lite version

- Update to minor bugfix version 5.2.3.7
  + When DOCKER=Yes, if both the DOCKER-ISOLATE and
    DOCKER-ISOLATE-STAGE-1 existed then the DOCKER-ISOLATE-STAGE-*
    chains were not preserved through shorewall state changes.
    That has been corrected so that both chains are preserved if
    present.
  + Previously, the compiler always detected the OLD_CONNTRACK_MATCH
    capability as being available in IPv6. When OLD_CONNTRACK_MATCH
    was available, the compiler also mishandled inversion ('!') in the
    ORIGDEST columns, leading to an assertion failure.
    Both the incorrect capability detection and the mishandled
    inversion have been corrected.
  + During 'enable' processing, if address variables associated with
    the interface have values different than those when the firewall
    was last started/restarted/reloaded, then a 'reload' is performed
    rather than a simple 'enable'. The logic that checks for those
    changes was incorrect in some configurations, leading to unneeded
    reload operations. That has been corrected.
  + When MANGLE_ENABLED=No in shorewall[6].conf, some features
    requiring use of the mangle table can be allowed, even though the
    mangle table is not updated. That has been corrected such that use
    of such features will raise an error.
  + When the IfEvent(...,reset) action was invoked, the compiler
    previously emitted a spurious "Resetting..." message. That message
    has been suppressed.
- Packaging
  + Introduce define conf_need_update to track when we activate the
  post update warning for users when there's minor or major version
  update of shorewall boo#1166114

- Update to bugfix minor 5.2.3.6
  + Fix for possible start failure when both Docker containers
    and Libvirt VMs were in use.

- Update to bugfix minor 5.2.3.5
  + A typo in the FTP documentation has been corrected.
  + The recommended mss setting when using IPSec with ipcomp
    has been corrected.
  + A number of incorrect links in the manpages have been
    corrected.
  + The 'bypass' option is now allowed when specifying an
    NFQUEUE policy. Previously, specifying that option resulted
    in an error.
  + Corrected IPv6 Address Range parsing.
  + Previously, such ranges were required to be of the form
    [<addr1>-<addr2>] rather than the more standard form
    [<addr1>]-[<addr2>]. In the snat file (and in nat actions),
    the latter form was actually flagged as an error while in
    other contexts, it resulted in a less obvious error being
    raised.
  + The manpages have been updated to refer to
    https://shorewall.org rather than http://www.shorewall.org.
- Refresh spec file

- Update to bugfix minor 5.2.3.4
  + Update release documents.
  + Correct handling of multi-queue NFQUEUE as a policy.
  + Correct handling of multi-queue NFQUEUE as a macro parameter.
  + Correct the description of the 'bypass' NFQUEUE option in
    shorewall-rules(5).

- Update to bugfix minor 5.2.3.3
  Previously, if an ipset was specified in an SPORT column, the
  compiler would raise an error similar to:
  ERROR: Invalid ipset name () /etc/shorewall/rules (line 44)
- Update to bugfix minor 5.2.3.2
  Shorewall 5.2 automatically converts an existing 'masq' file to an
  equivalent 'snat' file. Regrettably, Shorewall 5.2.3 broke that
  automatic update, such that the following error message was issued:
   Use of uninitialized value $Shorewall::Nat::raw::currentline in
   pattern match (m//) at /usr/share/shorewall/Shorewall/Nat.pm
   line 511, <$currentfile> line nnn. and the generated 'masq'
  file contains only initial comments. That has been corrected.

- Update to bugfix minor 5.2.3.1 release
  + An issue in the implementation of policy file zone exclusion,
    released in 5.2.3 has been resolved. In the original release,
    if more than one zone was excluded then the following error was
    raised:
        ERROR: 'all' is not allowed in a source zone list
                etc/shorewall/policy (line ...)

- Update to new 5.2.3 bugfix release
  http://www.shorewall.net/pub/shorewall/5.2/shorewall-5.2.3/releasenotes.txt
  This is the retirement of Tom Eastep see.
  https://sourceforge.net/p/shorewall/mailman/message/36589782/
- Removed module* in file section
- Clean-up changes and spec (trailing slashes)

- Update to new 5.2.2 bugfix release
  http://www.shorewall.net/pub/shorewall/5.2/shorewall-5.2.2/releasenotes.txt
- Packaging:
  + As seen with upstream recommend running shorewall update on
    all version update

- Update to major version 5.2.1.4
  A lot of changes occurs since last package please consult
  http://www.shorewall.net/pub/shorewall/5.2/shorewall-5.2.1/releasenotes.txt
  and the know problem list at
  http://www.shorewall.net/pub/shorewall/5.2/shorewall-5.2.1/known_problems.txt
- Update your configuration shorewall update

This update was imported from the openSUSE:Leap:15.1:Update update project.

              

Packages


  • shorewall-5.2.4.4-bp151.4.3.1