umoci-0.4.4-bp151.2.3.1

- Enable build for s390x on openSUSE

- Update to umoci v0.4.4.
  * Added full-stack verification of blob hashes and descriptors for all
    operations (improving our hardening against bad images).
  * For details, see CHANGELOG.md in the package.

- Update to umoci v0.4.3.
  * Added --no-history to all commands with --history.* flags.
    Should only be used for umoci-config(1).
  * Added `umoci insert --tag` to allow non-destructive modifications.
  * For details, see packaged /usr/share/doc/packages/umoci/CHANGELOG.md.

- Update to umoci v0.4.2.
  * umoci now has an exposed Go API
  * Added `umoci unpack --keep-dirlinks`
  * `umoci insert` now supports whiteouts two ways.
  * For details, see CHANGELOG.md in the package.

- Update to umoci v0.4.1.
  * Support more tags (the valid set of characters in tags has expanded).
  * Add 'umoci insert' and 'umoci raw unpack'.
  * 'umoci unpack' correctly handles out-of-order whiteouts now.
  * 'umoci unpack' and 'umoci repack' make sure of a more optimised gzip
  implementation now -- in some benchmarks 'umoci repack' can have a speedup
  of up to 3x.
  * For details, see CHANGELOG.md in the package.

- Make use of %license macro.

- Update to umoci v0.4.0. Upstream changelog:
  + `umoci repack` now supports `--refresh-bundle` which will update the
  OCI bundle's metadata (mtree and umoci-specific manifests) after packing
  the image tag. This means that the bundle can be used as a base layer for
  future diffs without needing to unpack the image again.
  openSUSE/umoci#196
  + Added a website, and reworked the documentation to be better structured.
  You can visit the website at [`umo.ci`][umo.ci]. openSUSE/umoci#188
  + Added support for the `user.rootlesscontainers` specification, which
  allows for persistent on-disk emulation of `chown(2)` inside rootless
  containers. This implementation is interoperable with [@AkihiroSuda's
  `PRoot` fork][as-proot-fork] (though we do not test its interoperability
  at the moment) as both tools use [the same protobuf
  specification][rootlesscontainers-proto]. openSUSE/umoci#227
  + `umoci unpack` now has support for opaque whiteouts (whiteouts which
  remove all children of a directory in the lower layer), though `umoci
  repack` does not currently have support for generating them. While this
  is technically a spec requirement, through testing we've never
  encountered an actual user of these whiteouts. openSUSE/umoci#224
  openSUSE/umoci#229
  + `umoci unpack` will now use some rootless tricks inside user namespaces
  for operations that are known to fail (such as `mknod(2)`) while other
  operations will be carried out as normal (such as `lchown(2)`). It should
  be noted that the `/proc/self/uid_map` checking we do can be tricked into
  not detecting user namespaces, but you would need to be trying to break
  it on purpose. openSUSE/umoci#171 openSUSE/umoci#230
  * Fix a bug in our "parent directory restore" code, which is responsible
  for ensuring that the mtime and other similar properties of a directory
  are not modified by extraction inside said directory. The bug would
  manifest as xattrs not being restored properly in certain edge-cases
  (which we incidentally hit in a test-case). openSUSE/umoci#161
  openSUSE/umoci#162
  * `umoci unpack` will now "clean up" the bundle generated if an error
  occurs during unpacking. Previously this didn't happen, which made
  cleaning up the responsibility of the caller (which was quite difficult
  if you were unprivileged). This is a breaking change, but is in the error
  path so it's not critical. openSUSE/umoci#174 openSUSE/umoci#187
  * `umoci gc` now will no longer remove unknown files and directories that
  aren't `flock(2)`ed, thus ensuring that any possible OCI image-spec
  extensions or other users of an image being operated on will no longer
  break. openSUSE/umoci#198
  * `umoci unpack --rootless` will now correctly handle regular file
  unpacking when overwriting a file that `umoci` doesn't have write access
  to. In addition, the semantics of pre-existing hardlinks to a clobbered
  file are clarified (the hard-links will not refer to the new layer's
  inode). openSUSE/umoci#222 openSUSE/umoci#223
  [as-proot-fork]: https://github.com/AkihiroSuda/runrootless
  [rootlesscontainers-proto]: https://rootlesscontaine.rs/proto/rootlesscontainers.proto
  [umo.ci]: https://umo.ci/

- do not build on s390, only on s390x (no go on s390)

- Update to umoci v0.3.1. Upstream changelog:
  - Fix several minor bugs in `hack/release.sh` that caused the release artefacts
  to not match the intended style, as well as making it more generic so other
  projects can use it. openSUSE/umoci#155 openSUSE/umoci#163
  - A recent configuration issue caused `go vet` and `go lint` to not run as part
  of our CI jobs. This means that some of the information submitted as part of
  [CII best practices badging][cii] was not accurate. This has been corrected,
  and after review we concluded that only stylistic issues were discovered by
  static analysis. openSUSE/umoci#158
  - 32-bit unit test builds were broken in a refactor in [0.3.0]. This has been
  fixed, and we've added tests to our CI to ensure that something like this
  won't go unnoticed in the future. openSUSE/umoci#157
  - `umoci unpack` would not correctly preserve set{uid,gid} bits. While this
  would not cause issues when building an image (as we only create a manifest
  of the final extracted rootfs), it would cause issues for other users of
  `umoci`. openSUSE/umoci#166 openSUSE/umoci#169
  - Updated to [v0.4.1 of `go-mtree`][gomtree-v0.4.1], which fixes several minor
  bugs with manifest generation. openSUSE/umoci#176
  - `umoci unpack` would not handle "weird" tar archive layers previously (it
  would error out with DiffID errors). While this wouldn't cause issues for
  layers generated using Go's `archive/tar` implementation, it would cause
  issues for GNU gzip and other such tools.
  - `umoci unpack`'s mapping options (`--uid-map` and `--gid-map`) have had an
  interface change, to better match the [`user_namespaces(7)`][user_namespaces]
  interfaces. Note that this is a **breaking change**, but the workaround is to
  switch to the trivially different (but now more consistent) format.
  openSUSE/umoci#167
  - `umoci unpack` used to create the bundle and rootfs with world
  read-and-execute permissions by default. This could potentially result in an
  unsafe rootfs (containing dangerous setuid binaries for instance) being
  accessible by an unprivileged user. This has been fixed by always setting the
  mode of the bundle to `0700`, which requires a user to explicitly work around
  this basic protection. This scenario was documented in our security
  documentation previously, but has now been fixed. openSUSE/umoci#181
  openSUSE/umoci#182
  [cii]: https://bestpractices.coreinfrastructure.org/projects/1084
  [gomtree-v0.4.1]: https://github.com/vbatts/go-mtree/releases/tag/v0.4.1
  [user_namespaces]: http://man7.org/linux/man-pages/man7/user_namespaces.7.html
- Remove patch that has been applied upstream.
  - i586-0001-fix-mis-usage-of-time.Unix.patch

- Add backport of https://github.com/openSUSE/umoci/pull/157, to fix i586
  builds.
    + i586-0001-fix-mis-usage-of-time.Unix.patch

- Update to umoci v0.3.0. Upstream changelog:
  - `umoci` now passes all of the requirements for the [CII best practices bading
  program][cii]. openSUSE/umoci#134
  - `umoci` also now has more extensive architecture, quick-start and roadmap
  documentation. openSUSE/umoci#134
  - `umoci` now supports [`1.0.0` of the OCI image
  specification][ispec-v1.0.0] and [`1.0.0` of the OCI runtime
  specification][rspec-v1.0.0], which are the first milestone release. Note
  that there are still some remaining UX issues with `--image` and other parts
  of `umoci` which may be subject to change in future versions. In particular,
  this update of the specification now means that images may have ambiguous
  tags. `umoci` will warn you if an operation may have an ambiguous result, but
  we plan to improve this functionality far more in the future.
  openSUSE/umoci#133 openSUSE/umoci#142
  - `umoci` also now supports more complicated descriptor walk structures, and
  also handles mutation of such structures more sanely. At the moment, this
  functionality has not been used "in the wild" and `umoci` doesn't have the UX
  to create such structures (yet) but these will be implemented in future
  versions. openSUSE/umoci#145
  - `umoci repack` now supports `--mask-path` to ignore changes in the rootfs
  that are in a child of at least one of the provided masks when generating new
  layers. openSUSE/umoci#127
  - Error messages from `github.com/openSUSE/umoci/oci/cas/drivers/dir` actually
  make sense now. openSUSE/umoci#121
  - `umoci unpack` now generates `config.json` blobs according to the [still
  proposed][ispec-pr492] OCI image specification conversion document.
  openSUSE/umoci#120
  - `umoci repack` also now automatically adding `Config.Volumes` from the image
  configuration to the set of masked paths.  This matches recently added
  [recommendations by the spec][ispec-pr694], but is a backwards-incompatible
  change because the new default is that `Config.Volumes` **will** be masked.
  If you wish to retain the old semantics, use `--no-mask-volumes` (though make
  sure to be aware of the reasoning behind `Config.Volume` masking).
  openSUSE/umoci#127
  - `umoci` now uses [`SecureJoin`][securejoin] rather than a patched version of
  `FollowSymlinkInScope`. The two implementations are roughly equivalent, but
  `SecureJoin` has a nicer API and is maintained as a separate project.
  - Switched to using `golang.org/x/sys/unix` over `syscall` where possible,
  which makes the codebase significantly cleaner. openSUSE/umoci#141
  [cii]: https://bestpractices.coreinfrastructure.org/projects/1084
  [rspec-v1.0.0]: https://github.com/opencontainers/runtime-spec/releases/tag/v1.0.0
  [ispec-v1.0.0]: https://github.com/opencontainers/image-spec/releases/tag/v1.0.0
  [ispec-pr492]: https://github.com/opencontainers/image-spec/pull/492
  [ispec-pr694]: https://github.com/opencontainers/image-spec/pull/694
  [securejoin]: https://github.com/cyphar/filepath-securejoin

- remove the go_arches macro because we are using go1.7 which
  is available in all archs

- Update to umoci v0.2.1. Upstream changelog:
  * `hack/release.sh` automates the process of generating all of the published
  artefacts for releases. The new script also generates signed source code
  archives. openSUSE/umoci#116
  * `umoci` now outputs configurations that are compliant with [`v1.0.0-rc5` of
  the OCI runtime-spec][rspec-v1.0.0-rc5]. This means that now you can use runc
  v1.0.0-rc3 with `umoci` (and rootless containers should work out of the box
  if you use a development build of runc). openSUSE/umoci#114
  * `umoci unpack` no longer adds a dummy linux.seccomp entry, and instead just
  sets it to null. openSUSE/umoci#114
  [rspec-v1.0.0-rc5]: https://github.com/opencontainers/runtime-spec/releases/tag/v1.0.0-rc5
- Add umoci.keyring to check signed archives on check-in and submission.

- Update to umoci v0.2.0. Upstream changelog:
  * `umoci` now has some automated scripts for generated RPMs that are used in
  openSUSE to automatically submit packages to OBS. openSUSE/umoci#101
  * `--clear=config.{cmd,entrypoint}` is now supported. While this interface is a
  bit weird (`cmd` and `entrypoint` aren't treated atomically) this makes the
  UX more consistent while we come up with a better `cmd` and `entrypoint` UX.
  openSUSE/umoci#107
  * New subcommand: `umoci raw runtime-config`. It generates the runtime-spec
  config.json for a particular image without also unpacking the root
  filesystem, allowing for users of `umoci` that are regularly parsing
  `config.json` without caring about the root filesystem to be more efficient.
  However, a downside of this approach is that some image-spec fields
  (`Config.User`) require a root filesystem in order to make sense, which is
  why this command is hidden under the `umoci-raw(1)` subcommand (to make sure
  only users that understand what they're doing use it). openSUSE/umoci#110
  * `umoci`'s `oci/cas` and `oci/config` libraries have been massively refactored
  and rewritten, to allow for third-parties to use the OCI libraries. The plan
  is for these to eventually become part of an OCI project. openSUSE/umoci#90
  * The `oci/cas` interface has been modifed to switch from `*ispec.Descriptor`
  to `ispec.Descriptor`. This is a breaking, but fairly insignificant, change.
  openSUSE/umoci#89
  * `umoci` now uses an updated version of `go-mtree`, which has a complete
  rewrite of `Vis` and `Unvis`. The rewrite ensures that unicode handling is
  handled in a far more consistent and sane way. openSUSE/umoci#88
  * `umoci` used to set `process.user.additionalGids` to the "normal value" when
  unpacking an image in rootless mode, causing issues when trying to actually
  run said bundle with runC. openSUSE/umoci#109

- Update to umoci v0.1.0. Upstream changelog:
  * `CHANGELOG.md` has now been added. openSUSE/umoci#76
  * `umoci` now supports `v1.0.0-rc4` images, which has made fairly minimal
  changes to the schema (mainly related to `mediaType`s). While this change
  * *is** backwards compatible (several fields were removed from the schema, but
  the specification allows for "additional fields"), tools using older versions
  of the specification may fail to operate on newer OCI images. There was no UX
  change associated with this update.
  * `umoci tag` would fail to clobber existing tags, which was in contrast to how
  the rest of the tag clobbering commands operated. This has been fixed and is
  now consistent with the other commands. openSUSE/umoci#78
  * `umoci repack` now can correctly handle unicode-encoded filenames, allowing
  the creation of containers that have oddly named files. This required fixes
  to go-mtree (where the issue was). openSUSE/umoci#80

- Trim irrelevant parts from description.
  Replace %__macros by their simpler commands.
  fdupes should respect partition boundaries.

- Switch upstream channel to openSUSE's GitHub (where the project has been
  moved).
- Update to umoci v0.0.0. Upstream changelog:
  This is the first beta release of umoci, and it includes very few
  changes from v0.0.0-rc3. However, at this point the UX is effectively
  stable and umoci is properly tested. The (small) list of changes in this
  release from -rc3 is:
  * Static compilation now works properly. openSUSE/umoci#64
  * 32-bit builds have been fixed, and now umoci works on 32-bit
  architectures. openSUSE/umoci#70
  * The unit tests can now be run inside the %check section of an rpmbuild
  script, allowing for proper testing of packages when they are built on
  openSUSE (and Fedora). openSUSE/umoci#65
  * Unit tests have been massively expanded, as have the integration
  tests. In addition, full coverage profiles (both unit and integration)
  are generated to fully understand how much of the code is properly
  tested. Currently it is at ~80%. openSUSE/umoci#68 openSUSE/umoci#69
  * The logging output has been cleaned up to be much better for end-users
  to read. It's also a lot less chatty now. openSUSE/umoci#73
  * This project has now been moved to become an openSUSE project.
  openSUSE/umoci#75

- Remove patch already merged upstream.
  - make-local-unit-tests-work-as-non-root.patch
- Switch to running hack/test-unit.sh in %check.

- Add patch to allow running upstream's unit tests in a %check section. This
  has already been merged upstream, this is just a backport. cyphar/umoci#65
  + make-local-unit-tests-work-as-non-root.patch
- Run upstream's unit tests in a %check section.

- Update to umoci 0.0.0~rc3. Upstream changelog:
  umoci has now gone a large amount of cleanup, and included the addition
  of a few previously missing features. The main thing blocking a full
  release is that manifest lists are still unsupported, and there are some
  upstream PRs that define some of umoci's operations that need to be
  merged before umoci can be considered a compliant implementation. In
  addition, the logging library needs to be swapped (and the amount of
  output reduced).
  Here's a short list of features added:
  * xattr support for both packing and unpacking was added, in particular
  this code also handles the issue of security.selinux. More policy
  decisions need to be added, but those are being discussed upstream.
  cyphar/umoci#52 cyphar/umoci#49
  * Ensure that environment variables have no duplicates. This ensures
  that umoci won't duplicate environment variables in either Config.Env
  or the extracted process.env. cyphar/umoci#30
  * Add support for read-only CAS operations with a read-only filesystem.
  Previously, attempting to open an OCI image on a read-only filesystem
  would fail miserably, now you can do read-only operations without
  issue. cyphar/umoci#47
  * Garbage collection now also garbage collects old tmpdirs, and other
  garbage from inside an image layout. cyphar/umoci#17
  * Output a helpful comment about --rootless if you're getting EPERMs.
  * Enable stack traces from an error if the --debug flag was applied to
  umoci. This is a feature that hopefully will be added to pkg/errors
  upstream.
  * Cleanups to vendoring of go-mtree so that it's much more
  upstream-friendly.