texmaker-5.0.2-bp150.2.4

- Use qmake macros
- Cleanup a bit with spec-cleaner

- Update to version 5.0.2:
  + A memory leak has been fixed in the internal pdf viewer.
- Drop BuildRequires: libpoppler-qt5-devel; no longer required by
  upstream as it uses bundled pdfium instead.

- Update to version 5.0.1:
  - A trouble with the MikTex's ps2pdf command has been fixed
  - The "-dpiscale x" option has been added to the Texmaker
    command line : with this option the environment variable
    QT_SCALE_FACTOR will be set to x before building the GUI (same
    behavior than adding "export QT_SCALE_FACTOR=x" to the
    environment variables). Can be used to adjust the interface
    if the monitor dpi is not well detected.
  - Updated translations.

- Remove redundant wording from descriptions.

- Update to version 5.0:
  + new and more modern interface look
  + highdpi is now supported on windows and linux
  + a spellcheck annoying trouble on kde5 has been fixed
  + new pdf engine
  + synctex updated to 1.18
  + Qt4 support has been removed : Qt5 (>=5.7) is now required
  + de, es, hu, pl, and zh_CN translations have been updated
- Drop texmaker-correct-doc-location.patch as now part of upstream
- Drop texmaker-appdata.patch as now part of upstream
- Require libqt5-qtbase-private-headers-devel at build time
- Require recommended LaTeX packages as runtime as well as at least
  one WEB browser and the xdg-utils for e.g. open help files

- Add texmaker-appdata.patch to install an appstream metadata
  file.
- Remove references to %{buildroot} during the %build stage,
  this is no loger required.
- Pass METAINFODIR=%{_datadir}/appdata to install the metainfo
  to openSUSE's currently preferred metainfo dir; the default
  upstream specification for appdata recommends
  /usr/share/metainfo instead, and is also the default metainfo
  path set in texmaker-appdata.patch.
- Run fdupes only inside the %{_datadir}/texmaker dir to prevent
  /usr/share/pixmaps/texmaker.png from becoming a link; if this
  happens, appstream generator fails to extract the icon and
  promptly fails to generate the appdata.

- Update to version 4.5:
  + The content of the \cite{} command is no more scanned while
    the spell checking.
  + A compilation trouble has been fixed with Qt 5.5.x.
  + A new option allow the svn users to display the uncommitted
    lines with a different color in the line number widget
    (Configure Texmaker -> Editor).
  + Two more options for the pdf internel viewer contextual menu
    (user request): number of words in the current pdf page and
    open the file browser at the pdf file location.
  + De, hu, it, nl, pl, se and zh_CN translations have been
    updated.
- Drop texmaker-include-qdatastream-header.patch: incorporated by
  upstream.

- Add texmaker-include-qdatastream-header.patch to include
  the QDataStream header where appropriate; fixes build failures
  with Qt >= 5.5 (now in Factory).

- Build against qt4 for openSUSE:42 (old poppler in openSUSE:42
  does not support qt5 bindings).

- Honour RPM_OPT_FLAGS.
- switch to QT5, no source code changes needed.

- Update to version 4.4.1:
  + Bugs fixed :
  - Fix crash if the "% !TEX encoding=" meta tag is not valid
  - Fix bug related to some shorctuts (ctrl+shift+?).
- Changes from version 4.4:
  + Features :
  - New wizard for a standard XeLaTeX document
  - A script ("User" menu to execute it) to apply a hard word
    wrap at 80 columns to the selected text
  - List of furnished scripts is displayed in the "Run Script"
    sub-menu of the "User" menu
  - Add support for the meta tags "% !TEX encoding=" and
    "% !TEX spellcheck"
  - Add .vrb,.listing and .spx extensions to the "Clean"
    command
  + Bugs fixed :
  - Include xelatex command in the "Tools" menu
  - Fix a bad behavior when spelling the document while a text
    is selected (issue 1393)
  + Updated translations.

- Update to version 4.3:
  + A visual diff view has been added to the "source viewer"
    (differences between the current files loaded in the editor
    and in the "source viewer") based on jsdifflib from Chas
    Emerick (BSD license)
  + When a command fails, the command is now displayed with the
    error message "Could not start the command"
  + An "reload all documents from file" option has been added to
    the "File" menu
  + If a "completion.txt" file is found in the same directory than
    texmaker.exe on windows, in the "/usr/share/texmaker/" folder
    on linux and in the "Resources" subdirectory of the .app
    on macosx, all items from this file will be added
    automatically for the autocompletion
  + An option to launch the "Clean" tool when exiting the program
    has been added
  + The cs, el, es, hu and se translations have been updated.

- Update to version 4.2:
  + Script support has been added (text editor -> "User" menu)
  + New command line option "-n" for launching a new instance of
    Texmaker
  + hu and nl translations have been updated
  + Bugs fixed :
  - While loading the last session, a bug about the focus has
    been fixed
  - A bug about the "commands" combo box in the main toolbar has
    been fixed
  - A typo in the russian translation has been fixed
  - A bad trigger detection for the snippets has been fixed
- Minor rebase of texmaker-correct-doc-location.patch to apply
  cleanly with updated version.

- Update to version 4.1.1:
  + The latex reference manual has been updated
  + ca and pt dictionaries have been added
  + ca, cs, de, es, pl and se translations have been updated
  + The math mode \( \) is now supported by the syntax
    highlighting
  + Double latex and pdflatex compilation has been added for the
    "Quick build" modes with asymptote (required for the cross
    references)
  + While autocompletion, if the inserted item doesn't contain a
    placeholder the cursor will no more jump to the next
    placeholder [user request]
  + The delay after regaining focus while the "check for external
    changes" option is used has been reduced [user request]
  + Autocompletion with an underscore character is no more stopped
    after reaching the undescore [user request]
  + .snm and .nav files are also deleted while using the "Clean"
    command [user request]
  + If the log report an error for the line 1, the cursor doesn't
    jump anymore to the top of the document [user request]
  + "user" completion items can now be directly modified [user
    request]

- Update to version 4.1
  + "Beamer presentation" wizard has been added
  + LuaLaTeX support has been added
  + new predefined "Quick build" modes have been added :
  - lualatex + view pdf
  - pdflatex + bib(la)tex + pdflatex + pdflatex + view pdf
  - latex + bib(la)tex + latex + latex + dvips + ps2pdf + view
    pdf
  - sweave + pdflatex + view pdf
  + Detection of utf8 encoding without BOM has been added
  + The "two pages" mode for the pdf viewer is no more reseted
    after a new compilation (patch from Andreas Volk)
  + "patent" entry to the biblatex menu has been added
  + Placeholders have been added to the "Tabbing" wizard
  + de, el, it and uk translations have been updated
  + A link to the english wikibook about LaTeX has been added to
    the "Help" menu (for non french users)
  + A trouble about the "most used symbols" panel has been fixed

- Update to 4.0.4:
  + poppler-0.24 support has been added
  + a compilation trouble on arm system has been fixed
  + the "Enter" key on numeric pad can now also be used to
    activate the default button in the "goto line", "find" and
    "replace" widgets (user request)
  + a commented line beginning by indent or spaces can now also be
    uncommented by the "uncomment" action of the "edit" menu
  + drag and drop for image files is now allowed in the editor
    (the \includegraphics command will be automatically inserted)
  + a trouble while boldifying some structure items has been fixed
  + CS, ES, PL, SE and ZH_CN translations have been updated.

- Update to version 4.0.3:
  + Find-and-replace actions can now be applied to a selection
    only
  + Users can now check if a new version is available via a new
    option in the "Help" menu
  + A tool to convert source files to Unicode has been added
  + The user manual has been updated
  + UK, ES, LV, El, AR and IT translations have been updated
  + utf8 option has been added to the "letter" wizard.

- Update to version 4.0.2:
  + Structure tags (chapter, section, ...) are now totally
    boldified in the editor
  + "Regular expression" option is no more checked by default in
    the "replace" widget.
  + Session file is no more stored in the temp/ directory, but in
    the "home/.cache" directory
  + detection of acrobat reader 11 and ghostscript 9.07 has been
    added (for new users)
  + ar and lv translations has been added

- Update to version 4.0.1:
  + Bugs fixed:
  - Potential crash when synctex sends a bad page
    number has been fixed
  - An 's' character is no more inserted while using Ctrl+S
    shortcut with an unmodified document
  + Pdownload35 option has been added to the default dvips
    command for miktex
- Pass smp_mflags to make to speed up build.

- Update to version 4.0:
  + Now supports Qt5 (this version can also be compiled on
    Qt>=4.7.2)
  + Ctrl+Shift+F2 keyboard shortcut for toggling between the
    master document and the current document
  + Continuous mode in the internal pdf viewer is not re-enabled
    automatically after a new compilation
  + Unix/MacOSX users can now add an option in the configuration
    dialog to the lp command for printing documents from the
    internal pdf viewer
  + a special "quick build command" has been added for the .asy
    files : if the current document has an .asy extension, this
    "asymptote quick build command" will be used with the F1
    shortcut instead of the standard "quick build command"
  + while using the "user tags", @@ will now be replaced by @
    (a single @ is always used to set a place holder)
  + Bugs fixed :
  - A compilation trouble with gcc 4.8 has been fixed
  - A problem with the insertion of an user tag by using a
    keyboard trigger has been fixed
  - A bad column count in the editor has been fixed