swtpm-0.10.0-160000.2.2

- Fix build without %check (boo#1227364)

- Update to 0.10.0:
  + swtpm:
  * Requires libtpms v0.10.0
  * Display tpmstate-opt-lock as a new capability
  * Add support for lock option parameter to tpmstate option
  * nvstore_linear: Add support for file-backend locking
  * Remove broken logic to check for neither dir nor file backend
  * Use ptm_cap_n to build PTM_GET_CAPABILITY response
  * Define a structure to return PTM_GET_CAPABILITY result
  * Implement --print-info to run TPMLIB_GetInfo with flags
  * Support --profile fd= to read profile from file descriptor
  * Support --profile file= to read profile from file
  * Ignore remove-disabled parameter on non-'custom' profile
  * Check for good entropy source in chroot environment
  * Implement a check for HMAC+sha1 for testing future restriction
  * Implement function to check whether a crypto algorithm is
    disabled
  * Print cmdarg-print-profiles as part of capabilities
  * Check whether SHA1 signature support is disabled in profile
  * Use TPMLIB_WasManufactured to check whether profile was applied
  * Determine whether OpenSSL needs to be configured (FIPs, SHA1
    signature)
  * Add support for --print-profiles option
  * Print profile names as part of capabilities JSON
  * Display new capability to allow setting a profile
  * Add support for --profile option to set a profile on TPM 2
  + swtpm_setup:
  * Comment flags for storage primary key and deprecate --create-spk
  * Implement --print-profiles to display all profile
  * Add profile entries to swtpm_setup.conf written by swtpm_setup
  * Add support for --profile-name option
  * Accept profiles with name starting with 'custom:'
  * Support default profile from file in swtpm_setup.conf
  * Support --profile-file-fd to read profile from file descriptor
  * Support --profile-file to read profile from file
  * Always log the active profile
  * Implement --profile-remove-fips-disabled option
  * Read default profile from swtpm_setup.conf
  * Print profile names as part of capabilities JSON
  * Add support for --profile parameter
  * Get default rsa keysize from setup_setup.conf if not given
  + swtpm_ioctl:
  * Use ptm_cap_n for non-CUSE PTM_GET_CAPABILITY response
  + selinux:
  * Change write to append for appending to log
  * Add rule for logging to svirt_image_t labeled files from swtpm_t
  + tests:
  * Update IBMTSS2 test suite to v2.4.0
  * Test activation of PCR banks when not all are available
  * Enable SWTPM_TEST_PROFILE for running test_tpm2_ibmtss2 with
    profile
  * Add a check for OPENSSL_ENABLE_SHA1_SIGNATURES in log file
  * Consolidate custom profile test cases and check for
    StateFormatLevel
  * Convert test_samples_create_tpmca to run installed
  * Mention test_tpm2_libtpms_versions_profiles requiring
    env. variables
  * allow running ibmtss2 tests against installed version
  * Derive support for CUSE from SWTPM_EXE help screen
  * Set OPENSSL_ENABLE_SHA1_SIGNATURES=1 for IBMTSS2 test
  * Extend test case testing across libtpms versions
  * Add test case for testing profiles across libtpms versions
  * Test the --profile option of swtpm_setup and swtpm
  * teach them to run installed
  * add installed-runner.sh
  * install tests on the system
  * lookup system binaries if INSTALLED is set
  + build-sys:
  * enable 64-bit file API on 32-bit systems
  * Add -Wshadow to the CFLAGS
  * Require that libtpms v0.10 is available for TPMLIB_SetProfile

- Fix swtpm custom module (bsc#1229131)
  - Add patch: 1229131-fix-swtpm-selinux-policy-mismatch.patch
  - this can be removed once swtpm upstream sorts out their custom selinux module.
    see: https://github.com/stefanberger/swtpm/issues/885
    there were a couple changes in the selinux-policy libvirt handling
    which causes the logfile in /var/log/swtpm/libvirt/qemu/*.log to be labeled
    virt_log_t instead of var_log_t. this patch allows swtpm_t to open the virt_log_t

- update to 0.9.0:
  - fixes: boo#1226398
  - swtpm:
  - Use umask() to create/truncated state file rather than fchmod()
  - Use fchmod to set mode bits provided by user
  - Replace mkstemp with g_mkstemp_full (Coverity)
  - fix typo in help message
  - cuse: Fix Coverity complaints regarding locks
  - Fix double free in error path
  - Close fd after main loop
  - Restore logging to stderr on log open failure
  - swtpm_setup:
  - Fail --pcr-banks without --tpm2
  - Fail --decryption or --allow-signing without --tpm2
  - Initialized argv in get_swtpm_capabilities()
  - Flush spk after persisting to create room for another key
  - Refactor duplicate code into swtpm_tpm2_write_cert_nvram
  - Move persisting of certificate into tpm2_persist_certificate
  - Pass key_type to function creating filename for key
  - Add scheme parameter before curveid to createprimary_ecc
  - Rename is_ek to preserve for future extension
  - Mask-out EK and plaform certificate flags and set cert_flags
  - Move common code into new function read_certificate_file()
  - Exit with '0' upon --version rather than '1'
  - Close file descriptors passed to swtpm process on parent side
  - Make stdout unbuffered
  - Use medium duration on TSC_PhysicalPresence to avoid timeouts
  - Add poll() after write() and before read() to detect errors
  - swtpm_localca:
  - Add support for up to 20 bytes serial numbers
  - Introduce --key as more generic alias for --ek
  - Add missing NULL option to end of array
  - Make stdout unbuffered
  - swtpm_cert:
  - Add support for serial numbers up to 20 bytes long
  - swtpm_ioctl:
  - Separate return code from flags
  - Repeatedly call PTM_GET_INFO for long responses
  - selinux:
  - Re-add rule for svirt_tcg_t and user_tmp_t:sock_file (virt-install)
  - New SELinux policy that requires Fedora 40 or later
  - tests:
  - Fixed occurrences of stray '' before '-'
  - Rearrange order of test cases to run some also as 'root'
  - Add tests for command line options and combinations of options
  - Add softhsm_setup to shellcheck'ed files and fix issues
  - Add missing 'exit 1' on unexpected file size on --reconfigure
  - Add test cases for swtpm_cert with max serial number
  - Fix spelling mistakes
  - reformat regexs for easier readability and extension
  - ibmtss2: Add patch to disable x509 test with older libtpms
  - Upgrade to ibmtss2 v2.0.1
  - Fixed several issues detected by shellcheck
  - build-sys:
  - Add support for --disable-tests to disable tests
  - Display GMP_LIBS and GMP_CFLAGS
  - Only display warning if pkg-config for gmp fails
  - Add gmp library and devel package as dependency
  - use PKG_CHECK_MODULES to check libtpms version

- Add missing requires for certtool

- Update to version 0.8.1:
  - swtpm:
  - Restore logging to stderr on log open failure
  - swtpm_setup:
  - Exit with '0' upon --version rather than '1'.
  - Initialized @argv in get_swtpm_capabilities()
  - swtpm_localca:
  - Add missing NULL option to end of array
  - SELinux:
  - Add rules for user_tpm_t:sockfile to allow unlink
  - Add rules for sock_file on user_tmp_t

- Make selinux optional to allow building this package for Leap, too.

- remove python3 dependency, no longer needed after rewrite (bsc#1211010)

- swtpm-fix-build.patch: disable -Wstack-protector, it fails on s390x
  bsc#1209117

- Drop trousers requirement