sundials-mvapich2-7.2.0-bp160.1.13

- Update to version 7.2.0:
  * Many changes, see
    <https://sundials.readthedocs.io/en/latest/Changelog_link.html#changes-to-sundials-in-release-7-2-0>

- Update to version 7.1.1:
  * Fixed a bug in v7.1.0 with the SYCL N_Vector N_VSpace
  * function (gh#LLNL/sundials#523).
- Changes from version 7.1.0:
  * Too many to list, see
    <https://github.com/LLNL/sundials/releases/tag/v7.1.0>.

- Update to version 7.0.0:
  * Many changes, see
    https://github.com/LLNL/sundials/releases/tag/v7.0.0.
- Update shared library package names in keeping with upstream
  so version bumps.
- Adapt to name change of shared library: libsundials_generic ->
  libsundials_core.

- Load the full mpivars instead of manually setting LD_LIBRARY_PATH
- Add flags to handle oversubscription for %check (bsc#1201273).
  _constraints avoids this in OBS, but local runs may not have 4
  cores available.

- Update to version 6.7.0:
  * Many changes, see
    https://github.com/LLNL/sundials/releases/tag/v6.7.0.
- Adapt shlib names for sunlinsol and sunnonlin libraries in
  keeping with upstream so versioning changes.

- Update to version 6.6.2:
  * Fixed build system support for MAGMA when using a NVIDIA HPC
    SDK installation of CUDA
  * Fixed targets used for rocBLAS and rocSPARSE.
- Changes from version 6.6.1:
  * Updated the Tpetra NVector interface to support Trilinos 14.
  * Fixed a memory leak when destroying a CUDA, HIP, SYCL, or
    system SUNMemoryHelper object.
  * Fixed a bug in ARKODE, CVODE, CVODES, IDA, and IDAS where the
    stop time may not be cleared when using normal mode if the
    requested output time is the same as the stop time.
- Changes from versio 6.6.0:
  * A new time-stepping module, SPRKStep, was added to ARKODE.
    This time-stepper provides explicit symplectic partitioned
    Runge-Kutta methods up to order 10 for separable Hamiltonian
    systems.
  * Added support for relaxation Runge-Kutta methods to ERKStep
    and ARKStep in ARKODE.
  * Added the second order IMEX method from Giraldo, Kelly, and
    Constantinescu 2013 as the default second order IMEX method in
    ARKStep.
  * Updated CVODE, CVODES and ARKODE default behavior when
    returning the solution when the internal time has reached a
    user-specified stop time.
  * A potential bug was fixed when using inequality constraint
    handling and calling ARKStepGetEstLocalErrors or
    ERKStepGetEstLocalErrors after a failed step in which an
    inequality constraint violation occurred.
  * Updated the F2003 utility routines SUNDIALSFileOpen and
    SUNDIALSFileClose to support user specification of stdout and
    stderr strings for the output file names.
- Changes from older releases: see
  https://computing.llnl.gov/projects/sundials/release-history
- Drop sundials-link-pthread.patch: fixed upstream.
- Bump so versions in keeping with upstream.

- Drop support for obsolete openmpi[123]
- Prepare support for openmpi5

- Add Requires: libsundials_sunmatrix4 explicitly for
  libsundials_sunlinsol4_3_0; automatic deps fails to distinguish
  between serial and mpi flavors causing resolving issues when
  building apps dependent on libsundials_sunlinsol.

- Update to version 6.3.0:
  * Added GetUserData functions in each package to retrieve the
    user data pointer provided to SetUserData functions
  * Fixed a bug in ERKStepReset, ERKStepReInit, ARKStepReset,
    ARKStepReInit, MRIStepReset, and MRIStepReInit where a
    previously-set value of tstop (from a call to
    ERKStepSetStopTime, ARKStepSetStopTime, or MRIStepSetStopTime,
    respectively) would not be cleared.
  * Updated MRIStepReset to call the corresponding
    MRIStepInnerResetFn with the same (tR,yR) arguments for the
    MRIStepInnerStepper object that is used to evolve the MRI
    "fast" time scale subproblems.
  * Added a new example which demonstrates using CVODE with a
    discontinuous right-hand-side function and rootfinding.
  * Added a variety of embedded DIRK methods from [Kennedy &
    Carpenter, NASA TM-2016-219173, 2016] and [Kennedy &
    Carpenter, Appl. Numer. Math., 146, 2019] to ARKODE.
  * Fixed the unintuitive behavior of the USE_GENERIC_MATH CMake
    option which caused the double precision math functions to be
    used regardless of the value of SUNDIALS_PRECISION.
  * Changed SUNDIALS_LOGGING_ENABLE_MPI CMake option default to be
  'OFF'.
- Split off sundials-sunlibs (previously libsundials4) into
  individual shared lib packages: libsundials_sunlinsol4_3_0,
  libsundials_sunmatrix4, and libsundials_sunnonlin3_3_0.

- Rename libsundials4 to sundials-sunlibs as it packages multiple
  shared libs pertaining to the main sundials library; shlib
  naming guidelines do not apply in this case.
- Drop no longer needed rpmlintrc file.
- Make -doc package into noarch.

- Update to version 5.2.0 (See
  https://computing.llnl.gov/projects/sundials/release-history for
  details):
  - Fixed a bug in how ARKode interfaces with a user-supplied,
    iterative, unscaled linear solver.
  - Fixed a bug in how ARKode interfaces with a user-supplied,
    iterative, unscaled linear solver.
  - Fixed a similar bug in how ARKode interfaces with scaled
    linear solvers when solving problems with non-identity mass
    matrices.
  - Fixed a memory leak in CVODES and IDAS from not deallocating
    the atolSmin0 and atolQSmin0 arrays.
  - Fixed a bug where a non-default value for the maximum allowed
    growth factor after the first step would be ignored.
  - Functions were added to each of the time integration packages
    to enable or disable the scaling applied to linear system
    solutions with matrix-based linear solvers to account for
    lagged matrix information.
  - Added two new functions, ARKStepSetMinReduction() and
    ERKStepSetMinReduction() to change the minimum allowed step
    size reduction factor after an error test failure.
  - Added a new SUNMatrix implementation, SUNMATRIX_CUSPARSE, that
    interfaces to the sparse matrix implementation from the NVIDIA
    cuSPARSE library.
  - Added a new "stiff" interpolation module to ARKode, based on
    Lagrange polynomial interpolation, that is accessible to each
    of the ARKStep, ERKStep and MRIStep time-stepping modules.

- Remove duplicated definitions.
- Remove bogus undefines of suffix and mpi_flavor for "serial"
  flavour. The former causes builds to fail for openSUSE >= 1550
  using rpm >= 4.15.

- Run spec-cleaner for minor cleanups.

- Update to version 5.0.0:
  * Two new NVector implementations created to support flexible
    partitioning of solution data among different processing
    elements (e.g., CPU + GPU) or for multi-physics problems that
    couple distinct MPI-based simulations together:
    NVECTOR_MANYVECTOR, amd NVECTOR_MPIMANYVECTOR,
  * An additional NVector implementation, NVECTOR_MPIPLUSX, has
    been created to support the MPI+X paradigm where X is a type
    of on-node parallelism (e.g., OpenMP, CUDA),
  * One new required NVector operation, N_VGetLength, and ten new
    optional vector operations have been added to the NVector API,
  * Two new SUNLinearSolver implementations,
    SUNLINEARSOLVER_SUPERLUDIST which interfaces with the
    SuperLU_DIST distributed, sparse, linear solver library, and
    the SUNLINEARSOLVER_CUSOLVERSP_BATCHQR, which interfaces to
    the cuSOLVE sparse batched QR linear solver,
  * A new SUNNonlinearSolver implementation,
    SUNNONLINSOL_PETSCSNES, which provides an interface to the
    PETSc SNES API,
  * New Fortran 2003 interface modules that provide Fortran users
    access to most of the SUNDIALS C API including ARKode,
    CVODE(S), IDA(S), and KINSOL,
  * Support for using explicit, implicit, or IMEX methods as the
    fast integrator with the MRIStep time-stepper in ARKode,
  * Several other minor changes and bug fixes: see
    https://computing.llnl.gov/projects/sundials/release-history.
- Merge all nvec solver libraries into a single shared lib
  package: %{shlib_nvec}.

- Enable multibuild with serial, openmpi1, openmpi2, openmpi3,
  and mvapich2 flavours.

- Follow shared library packaging policy and split out multiple
  versioned shlib packages. The main shared lib %{shlib_main}
  contains the common shared objects, while each individual solver
  gets its own shared lib package.
- Add blas-devel and lapack-devel BuildRequires; enable blas and
  lapack (does not work with 64 bits) during cmake.
- Enable pthread.

- Update to version 4.1.0:
  * An additional N_Vector implementation was added for Tpetra
    vector from Trilinos library to facilitate interoperability
    between SUNDIALS and Trilinos. This implementation is
    accompanied by additions to user documentation and SUNDIALS
    examples.
  * A bug was fixed where a nonlinear solver object could be freed
    twice in some use cases.
  * The EXAMPLES_ENABLE_RAJA CMake option has been removed. The
    option EXAMPLES_ENABLE_CUDA enables all examples that use CUDA
    including the RAJA examples with a CUDA back end (if the RAJA
    NVECTOR is enabled).
  * The implementation header files (e.g. arkode_impl.h) are no
    longer installed. This means users who are directly
    manipulating package memory structures will need to update
    their code to use the package’s public API.
  * Python is no longer required to run make test and make
    test_install.
  * Fixed a bug in ARKodeButcherTable_Write when printing a
    Butcher table without an embedding.
- Changes between previously packaged version (2.5.0) through
  version 4.0.2:
  https://computation.llnl.gov/projects/sundials/release-history.
- Switch to cmake based build in keeping with upstream.
- Drop devel-static package since application no longer builds
  static libraries anyway.
- Only build one (serial) version for now.
- Update Source and URL tags.
- Remove NOTICE and LICENSE files from includedir; package them
  properly as doc.

- fix mistyping in spec file which broke build where mvapich2
  is not available

- set --with-mpi-libs in configure in order to fix mpi library
  linking

- enable parallel build for openmpi and mvapich2

- remove not applied patch0 from files list

- spec files re-formating
- version 2.5.0
  * Many bugfixes and new features
  * See https://computation.llnl.gov/casc/sundials/download/
  whatsnew.html for a complete list of changes