scintilla-5.3.2-bp155.1.6

- Update to version 5.3.2:
  - Add SCI_REPLACETARGETMINIMAL to change text without causing
    unchanged prefix and suffix to be marked as modified in change
    history.
  - Draw background colour for EOL annotations with standard and
    boxed visuals.
  - Add SCI_GETSTYLEDTEXTFULL to support 64-bit document positions
    on Win32 replacing SCI_GETSTYLEDTEXT which is not safe for
    huge documents. Feature #1455.
  - Send SCN_AUTOCCOMPLETED for SCI_AUTOCSHOW triggering insertion
    because of SCI_AUTOCSETCHOOSESINGLE mode. Feature #1459.
  - Change 'paragraph up' commands SCI_PARAUP and SCI_PARAUPEXTEND
    to go to the start position of the paragraph containing the
    caret. Bug #2363.
  - Change release compilation optimization option to favour speed
    over space. -O2 for MSVC and -O3 for gcc and clang.
  - On Qt, implement SCI_SETRECTANGULARSELECTIONMODIFIER for all
    platforms.
  - On Qt, allow string form XPM images for SCI_REGISTERIMAGE.
- Minor refreshing of scintilla-shared.patch to apply cleanly.

- Update to versoin 5.3.1:
  * Added SCI_STYLESETINVISIBLEREPRESENTATION to make it easier to
    edit around invisible text (Feature #1453).
  * Removed NotifyLexerChanged notification from DocWatcher. This
    is a private interface but could be used by independent
    platform layers and was exposed by ScintillaDocument in the Qt
    implementation of ScintillaEdit.
  * Draw lines more consistently in SC_PHASES_TWO and
    SC_PHASES_ONE modes by clipping drawing to just the line
    rectangle.
  * Draw SC_MARK_BAR markers underneath other markers as they
    often cover multiple lines for change history and other
    markers mark individual lines.
  * Enlarge point and point top indicators and scale to be larger
    with larger text.
  * Suppress change history background line shading when printing.
    Bug #2358.
  * Make SCI_LINESCROLL more accurate when width of space not
    integer (Bug #2357).
  * On GTK, fix bug where there were too many or too few lines
    when wrapping (Bug #2349).

- Update to version 5.3.0:
  * Added change history which can display document changes
    (modified, saved, ...) in the margin or in the text.
  * Add SC_MARK_BAR marker and INDIC_POINT_TOP indicator.
  * Improve drawing of rounded rectangles on Direct2D.
  * Line state optimized to avoid excess allocations by always
    allocating for every line.
  * Add SC_FOLDACTION_CONTRACT_EVERY_LEVEL option to contract
    every level for SCI_FOLDALL [Bug #2340].
  * Enable multiline regex for gcc and clang when REGEX_MULTILINE
  * defined [Bug #2338].
  * Stop including STYLE_CALLTIP when calculating line height [Bug
    [#2341]].
  * Fix incorrect display of selection when printing in some modes
    [Bug #2335].
  * Fix crash on Qt when showing autocompletion and the caret
    isn't on a screen.
- Update so versions to match upstream's.

- Update to version 5.2.4:
  * Fix hiding selection when selection layer is
    SC_LAYER_UNDER_TEXT. Bug #2334.
  * Fix bad background colour for additional, secondary, and
    inactive selections when printing. Bug #2335.
  * Fix failures on GTK with non-UTF-8 text when multi-threading
    due to character set conversion code that was not thread-safe.
  * Fix crash when printing on Win32 in bidirectional mode with a
    non-empty selection.

- Update to version 5.2.3:
  * Improve performance of SCI_FOLDALL(SC_FOLDACTION_EXPAND) by
    not lexing whole document as it does not depend on folding
    structure.
  * Fix partial updates and non-responsive scroll bars on Xorg.
    This defers scroll bar changes to an idle task so could affect
    applications that depend on the scroll position being updated.
    Bug #2322, Bug #2196, Bug #2312.
  * Fix problem with horizontally inverted glyphs with buffered
    drawing and WS_EX_LAYOUTRTL set on Win32 GDI. Feature #1435.
  * For Qt 6, fix "modified" signal when text is null but length
    non-0. Bug #2328.
  * Fix pink selection background when printing by making it
    completely transparent.

- Update to version 5.2.2:
  * Add SCI_GETSTYLEINDEXAT API to return styles over 127 as
    positive integers. Feature #1431.
  * On GTK, scroll horizontally with shift + scroll wheel.
  * Fix crash with unexpected right-to-left text on GTK. Bug
    [#2309].
  * Fix position of end-of-line annotation when fold display text
    is visible. Bug #2320.
  * On Direct2D, support per-monitor text rendering parameters.
    Feature #1432.

- Update to version 5.2.1:
  * Enable multi-threaded layout on GTK.
  * Fix pixmap leak on GTK. Bug #2317.
  * Fix re-entrant painting on GTK to maintain update region.

- Revert to defining tar_ver macro literally to allow
  source_validator and similar services to work with sources.

- Update to version 5.2.0:
  * Add multithreaded layout to significantly improve performance
    for very wide lines. Feature #1427.
  * Made compatible with Qt 6.
  * Fix potential issue with length of buffer for string returning
    APIs in ScintillaEdit on Qt.
  * Fix inaccurate scroll bar when there are annotations and
    wrapping of inserted or deleted text changes number of screen
    lines. Feature #1422.
  * Allow choice of object file directory with makefile by setting
    DIR_O. Bug #2306.
  * On GTK, use fractional positioning to help Chinese characters
    in monospaced fonts line up better with roman characters. Bug
    [#2310].
- Rebase scintilla-shared.patch to apply cleanly.
- Ensure consistent definitions between packager defined macros,
  with less possibility for mismatch.

- Update to version 5.1.5:
  * ScintillaEditPy, Python bindings for Qt using PySide, has been
    removed.
  * When calling SCI_GETTEXT, SCI_GETSELTEXT, and SCI_GETCURLINE
    with a NULL buffer argument to discover the length that should
    be allocated, do not include the terminating NUL in the
    returned value.
  * Fix assertion failure with autocompletion list when order is
    SC_ORDER_CUSTOM or SC_ORDER_PERFORMSORT and the list is empty.
    Bug #2294.
  * On GTK using Wayland, display autocompletion with window on a
    secondary monitor. Bug #2296, Bug #2261.

- Update to version 5.1.4:
  * Add DEL to standard set of space characters for word
    operations.
  * Add CARETSTYLE_CURSES to draw more than 1 caret on curses
    terminal.
  * On GTK, fix primary selection paste within same instance. Bug
    [#2287].
  * On GTK, fix potential crash when closing Scintilla instances
    due to releasing global settings object.
  * GetLineEndTypesSupported returns LineEndType, not int.

- Update to version 5.1.3:
  * Fix bug with SCI_STYLESETCHECKMONOSPACED on Cocoa that led to
    incorrect layout with overlapping text.
- Changes from version 5.1.2:
  * Add SCI_STYLESETCHECKMONOSPACED which can be used to optimize
    fonts that are monospaced over the ASCII graphics characters.
  * Add SC_ELEMENT_FOLD_LINE to set the colour of fold lines. Add
    SC_ELEMENT_HIDDEN_LINE to show where lines are hidden. Feature
    [#1241], Feature #382, Feature #203.
  * Add SCI_SETCARETLINEHIGHLIGHTSUBLINE to highlight just the
    subline containing the caret instead of the whole document
    line. Feature #841.
  * Allow SCI_HIDELINES to hide the first line or all lines which
    can be useful for filtered views.
  * Make negative settings for extra ascent and descent safer by
    ensuring calculated ascent and thus line height is at least 1
    pixel.
  * Fix display of fold lines when wrapped so they are only drawn
    once per line, not on each subline.
  * Fix crash with too many subexpressions in regular expression
    search with SCFIND_CXX11REGEX. Bug #2281.
  * On GTK, fix the line spacing so that underscores and accents
    are visible for some fonts such as DejaVu Sans Mono 10.
  * On GTK, respond to changes in system font scaling by clearing
    any cached layout data.

- Update to version 5.1.1:
  * In DBCS encodings, treat valid DBCS lead byte followed by
    invalid trail byte as single byte. Feature #1408.
  * Searching was optimized for documents that contain mostly
    ASCII text and is often 2-3 times faster. Feature #1381.
  * Word searching behaves more consistently at start and end of
    document.
  * Add SCI_ALLOCATELINES to allocate indices to hold some number
    of lines. This can decrease reallocation overhead when the
    application can count or estimate the number of lines in huge
    files. Feature #1370.
  * Add SCI_AUTOCSETOPTIONS to allow choosing a non-resizeable
    autocompletion list on Win32. Feature #1284.
- Minor rebase of scintilla-shared.patch to apply cleanly.

- Update to version 5.1.0:
  * Add SciFnDirectStatus, a direct access function which also
    returns status. It can be retrieved with
    SCI_GETDIRECTSTATUSFUNCTION. This can avoid calling
    SCI_GETSTATUS after every API to determine failure so can
    improve performance.
  * Add more type-safe wrappers to the API. These are defined in
    include/ScintillaCall.h and implemented in
    call/ScintillaCall.cxx. ScintillaCall throws
    Scintilla::Failure exceptions when a call fails.
  * Add APIs for setting appearance (traditional blob or plain
    text) and colour of representations and support setting a
    representation for the "\r\n" line end sequence.
  * Add SCI_REPLACERECTANGULAR to insert text like a rectangular
    paste.
  * Fixed bug with SCI_GETLASTCHILD. Bug #2260.
  * Fixed gcc link-time-optimization (LTO) compilation. Bug #2259.
- Refresh scintilla-shared.patch to apply against updated version.
- Install license file using %license.
- Drop fdupes form BuildRequires: no longer needed.
- Minor specfile cleanups.

- Fix RPM groups and compact package descriptions.

- Update to version 3.7.5:
  * Added a caret line frame as an alternative visual for
    highlighting the caret line.
  * Added "Reverse Selected Lines" feature.
  * SciTE adds "Select All Bookmarks" command.
  * SciTE adds a save.path.suggestion setting to suggest a file
    name when saving an unnamed buffer.
  * Updated case conversion and character categories to Unicode 9.
  * The Baan lexer recognizes numeric literals in a more compliant
    manner including hexadecimal numbers and exponentials.
  * The Bash lexer recognizes strings in lists in more cases. Bug
    [#1944].
  * The Fortran lexer recognizes a preprocessor line after a line
    continuation &. Bug #1935.
  * The Fortran folder can fold comments. Bug #1936.
  * The PowerShell lexer recognizes escaped quotes in strings. Bug
    [#1929].
  * The Python lexer recognizes identifiers more accurately when
    they include non-ASCII characters.
  * The Python folder treats comments at the end of the file as
    separate from the preceding structure.
  * The YAML lexer recognizes comments in more situations and
    styles a "..." line like a "---" line. Bug #1931.
  * Update scroll bar when annotations added, removed, or
    visibility changed. Feature #1187.
  * Canceling modes with the Esc key preserves a rectangular
    selection. Bug #1940.
  * Builds are made with a sorted list of lexers to be more
    reproducible. Bug #1946.
  * SciTE examines at most 1 MB of a file to automatically
    determine indentation for indent.auto to avoid a lengthy pause
    when loading very large files.
  * SciTE user interface uses lighter colours and fewer 3D
    elements to match current desktop environments.
  * SciTE sets buffer dirty and shows message when file deleted if
    load.on.activate on.
  * SciTE on Windows Find strip Find button works in incremental
    no-close mode. Bug #1926.
- Drop reproducible.patch: fixed upstream.
- Rebase scintilla-shared.patch for update; make it work with -p1
  for use with quilt.

- Add reproducible.patch to have constant link-order
  and make build fully reproducible

- Version update to 3.6.6:
  * Various small bugfixes
- Remove support for older distros that are marked as dead
- Update shared patch to set properly cflags:
  * scintilla-shared.patch

- Update to 3.6.4
  * avoids some folding bugs by automatically unfolding and
    improves clipboard robustness on Win32.

- Update to 3.6.3
  * No changelog available

- Update to 3.6.2
  * No changelog available

- Update to version 3.5.4
  * No changelog available
- Build with gtk3 support for openSUSE > 13.1
- Bump so version to 3
- Add glib2-devel require; new upstream dependency
- Update scintilla-shared.patch
- Remove redundant %clean section
- Enable parallel building with %{?_smp_mflags}

- license update: MIT
  License is closely related to the MIT license. Use SPDX format

- add libtool as buildrequire to avoid implicit dependency

- updated to the version 2.29

- making sure that no include can be included twice

- commenting out fdupes on non-SuSE distro

- packaging even src headers (MySQL Workbench need them)

- moving headers to the scintilla directory

- updated to version 2.01
  - 2.01 changes
  - Fix to positioning rectangular paste when viewing line ends.
  - Don't insert new lines and indentation for line ends at end of
    rectangular paste.
  - When not in additional selection typing mode, cutting a
    rectangular selection removes all of the selected text.
  - Rectangular selections are copied to the clipboard in document
    order, not in the order of selection.
  - SCI_SETCURRENTPOS and SCI_SETANCHOR work in rectangular mode.
  - On GTK+, drag and drop to a later position in the document now
    drops at the position.
  - Fix bug where missing property did not use default value.
  - 2.0 changes
  - Multiple pieces of text can be selected simultaneously by holding
    control whil dragging the mouse. Typing, backspace and delete may
    affect all selections together.
  - Virtual space allows selecting beyond the last character on a line.
  - SciTE on GTK+ path bar is now optional and defaults to off.
  - MagikSF lexer recognises numbers correctly.
  - Folding of Python comments and blank lines improved. Bug #210240.
  - Bug fixed where background colour of last character in document
    leaked past that character.
  - Crash fixed when adding marker beyond last line in document.
    Bug #2830307.
  - Resource leak fixed in SciTE for Windows when printing fails.
    Bug #2816524.
  - Bug fixed on Windows where the system caret was destroyed during
    destruction when another window was using the system caret.
    Bug #2830223.
  - Bug fixed where indentation guides were drawn over text when the
    indentation used a style with a different space width to the
    default style.
  - SciTE bug fixed where box comment added a bare line feed rather
    than the chosen line end. Bug #2818104.
  - Reverted fix that led to wrapping whole document when displaying
    the first line of the document.
  - Export to LaTeX in SciTE fixed to work in more cases and not use
    as much space. Bug #1286548.
  - Bug fixed where EN_CHANGE notification was sent when performing a
    paste operation in a read-only document. Bug #2825485.
  - Refactored code so that Scintilla exposes less of its internal
    implementation and uses the C++ standard library for some basic
    collections. Projects that linked to Scintilla's SString or PropSet
    classes should copy this code from a previous version of Scintilla
    or from SciTE.

- updated to version 1.79
  - Scintilla reports memory exhaustion instead of crashing.
  - for more details see http://www.scintilla.org/ScintillaHistory.html

- updated to version 1.78
  - allows annotation lines to be displayed beneath each document line and to
    display a margin with different text for each document line
  - for more details see http://www.scintilla.org/ScintillaHistory.html
- not packaging static libraries anymore

- forgotten macro expanded - fixed -devel dependencies

- New Package (Version 1.77)