redis-4.0.10-bp150.1.3

- update to 4.0.10 (boo#1097430) CVE-2018-11218 CVE-2018-11219
  https://raw.githubusercontent.com/antirez/redis/4.0.10/00-RELEASENOTES
  - Important security issues related to the Lua scripting engine.
    Please check https://github.com/antirez/redis/issues/5017 for
    more information.
  - A bug with SCAN, SSCAN, HSCAN and ZSCAN, that may not return
    all the elements.  We also add a regression test that can
    trigger the issue often when present, and may in theory be able
    to find unrelated regressions.
  - A PSYNC2 bug is fixed: Redis should not expire keys when saving
    RDB files because otherwise it is no longer possible to use
    such RDB file as a base for partial resynchronization. It no
    longer represents the right state.
  - Compatibility of AOF with RDB preamble when the RDB checksum is
    disabled.
  - Sentinel bug that in some cases prevented Sentinel to detect
    that the master was down immediately. A delay was added to the
    detection.
- refreshed patches to apply cleanly again
  redis-conf.patch
  redis-initscript.patch

- Update redis-enable-bactrace-on-x86-and-ia64-only.patch to handle
  arm and rename it to redis-enable-bactrace-on-x86-ia64-and_arm32_only.patch
- Add redis-disable_integration_logging.patch to disable logging test
  when backtrace is not enabled

- Update to 4.0.9
  * https://raw.githubusercontent.com/antirez/redis/4.0.9/00-RELEASENOTES
  * Critical upgrade for users using AOF with the fsync policy set to "always".
  * Latency monitor could report wrong latencies under certain conditions.
  * AOF rewriting could fail when a backgronud rewrite is triggered and
    at the same time the AOF is switched on/off.
  * Redis Cluster crash-recovery safety improved.
  * Redis Cluster has now the ability to configure certain slaves so that
    they'll never attempt a failover.
  * Keyspace notifications API in modules.
  * RM_Call() is now faster by reusing the same client.
  * Tracking of the percentage of keys already logically expired but yet
    not evicted.

- Update to 4.0.8
  * Release notes: https://raw.githubusercontent.com/antirez/redis/4.0.8/00-RELEASENOTES
  * Fix crash Redis Cluster instances during deletions.

- Update to 4.0.7
  * Release notes: https://raw.githubusercontent.com/antirez/redis/4.0.7/00-RELEASENOTES
  * Many 32 bit overflows were addressed in order to allow to use Redis with
    a very significant amount of data, memory size permitting.
  * MEMORY USAGE fixed for the list type.
  * Allow read-only scripts in Redis Cluster.
  * Fix AOF pipes setup in edge case.
  * AUTH option for MIGRATE.
  * HyperLogLogs are no longer converted from sparse to dense in order
    to be merged.
  * Fix AOF rewrite dead loop under edge cases.
  * Fix processing of large bulk strings (>= 2GB).
  * Added RM_UnlinkKey in modules API.
  * Fix Redis Cluster crashes when certain commands with a variable number
    of arguments are called in an improper way.
  * Fix memory leak in lazyfree engine.
  * Fix many potentially successful partial synchronizations that end
    doing a full SYNC, because of a bug destroying the replication
    backlog on the slave. So after a failover the slave was often not able
    to PSYNC with masters, and a full SYNC was triggered. The bug only
    happened after 1 hour of uptime so escaped the unit tests.
  * Improve anti-affinity in master/slave allocation for Redis Cluster
    when the cluster is created.
  * Improve output buffer handling for slaves, by not limiting the amount
    of writes a slave could receive.

- redis 3.2.2
- Highlight bug fixes:
  * Fix Redis server and Sentinel crashes
  * Fix GEORADIUS errors in reported entries
- New features:
  * slaves support the slave-announce-ip and slave-announce-port
    options.
  * RDB check utlity is now part of Redis and uses the same RDB code
  * redis-check-dump utility is now able to show certain information
    about the RDB file including creating version and date.

- Fix installation example in README.SUSE

- Update to 3.0.7:
  * [FIX] Many fixes to MIGRATE multiple keys implementation.
  * [FIX] A Redis Cluster node crash was fixed because of wrong handling of
    node->slaveof pointers.
  * [FIX] Fix redis-trib rebalance when nodes need to be left empty because
    the specified weight is zero.
  * [FIX] MIGRATE: Never send -ASK redirections for MIGRATE when there are
  * [FIX] Lua debugger crash when printing too deeply nested objects.
  * [FIX] Redis-cli implementation of Lua debugging now allows to use the
    SCRIPT DEBUG command directly, switching to debugging mode as needed.
  * [FIX] Redis-trib is now able to fix more errors. A new CLUSTER subcommand
    called BUMPEPOCH was introduced in order to support new modes
    for the "fix" subcommand.
  * [NEW] Redis proctected mode: this feature improves Redis security and makes
    harder to run Redis in a configuration that is unsecure because no
    firewalling was used in order to protect Redis from external accesses.
  * [NEW] Cluster/Sentinel tests now use OSX leak to perform leak detection
    at the end of every unit.
  * [NEW] Detect and show server crashes during Cluster/Sentinel tests.
  * [NEW] More reliable Cluster/Sentinel test becuase of timing errors and
  - LOADING errors.
  * [FIX] lua_struct.c/getnum security issue fixed.
  * [FIX] Redis Cluster replica migration fixed.
  * [FIX] Fix a race condition in processCommand() because of interactions
    with freeMemoryIfNeeded().
  * [NEW] Backported from the upcoming Redis 3.2:
    MIGRATE now supports an extended multiple-keys pipelined mode, which
    is an order of magnitude faster. Redis Cluster now uses this mode
    in order to perform reshardings and rebalancings.
  * [NEW] Backported from the upcoming Redis 3.2:
    Redis Cluster has now support for rebalancing via the redis-trib
    rebalance command. Demo here:
  * [NEW] Redis Cluster redis-trib.rb new "info" subcommand.
  * [NEW] Redis Cluster tests improved.
  * [NEW] Log offending memory access address on SIGSEGV/SIGBUS

- Update to 3.0.5
  * [FIX] MOVE now moves the TTL as well. A bug lasting forever...
  finally fixed thanks to Andy Grunwald that reported it.
  * [FIX] Fix a false positive in HSTRLEN test.
  * [FIX] Fix a bug in redis-cli --pipe mode that was not able to
  read back replies from the server incrementally. Now a mass
  import will use a lot less memory, and you can use --pipe to
  do incremental streaming.
  * [FIX] Slave detection of master timeout.
  * [NEW] Cluster: redis-trib fix can fix an additional case for
  opens lots.
  * [NEW] Cluster: redis-trib import support for --copy and
  - -replace options

- update to 3.0.4
  Upgrade urgency: HIGH for Redis and Sentinel. However note that in
    order to fix certain replication bugs, the
    replication internals were modified in a very heavy
    way. So while this release is conceptually saner, it
    may contain regressions. For this reason, before the
    release, QA activities were performed by me (antirez)
    and Redis Labs and no evident bug was found.
  - [FIX] A number of bugs related to replication PSYNC and the (yet
    experimental) diskless replication feature were fixed. The bugs
    could lead to inconsistency between masters and slaves. (Salvatore
    Sanfilippo, Oran Agra fixed the issue found by Yuval Inbar)
  - [FIX] A replication bug in the context of PSYNC partial
    resynchonization was found and fixed. This bug happens even when
    diskless replication is off in the case different slaves connect at
    different times while the master is creating an RDB file, and later
    a partial resynchronization is attempted by a slave that connected
    not as the first one. (Salvatore Sanfilippo, Oran Agra)
  - [FIX] Chained replication and PSYNC interactions leading to
    potential stale chained slaves data set, see issue #2694. (Salvatore
    Sanfilippo fixed an issue reported by "GeorgeBJ" user at Github)
  - [FIX] redis-cli --scan iteration fixed when returned cursor
    overflows 32 bit signed integer. (Ofir Luzon, Yuval Inbar)
  - [FIX] Sentinel: fixed a bug during the master switch process, where
    for a failed conditional check, the new configuration is rewritten,
    during a small window of time, in a corrupted way where the master
    is also reported to be one of the slaves. This bug is rare to
    trigger but apparently it happens in the wild, and the effect is to
    see a replication loop where the master will try to replicate with
    itself.  A detailed explanation of the bug and its effects can be
    found in the commit message here:
    https://github.com/antirez/redis/commit/c20218eb5770b2cafb12bc7092313b8358fedc0a.
    The bug was found by Jan-Erik Rediger using a static analyzer and
    fixed by Salvatore Sanfilippo.
  - [FIX] Sentinel lack of arity checks for certain commands.  (Rogerio
    Goncalves, Salvatore Sanfilippo)
  - [NEW] Replication internals rewritten in order to be more resistant
    to bugs.  The replication handshake in the slave side was rewritten
    as a non blocking state machine. (Salvatore Sanfilippo, Oran Agra)
  - [NEW] New "replication capabilities" feature introduced in order to
    signal from the master to the slave what are the features supported,
    so that the master can choose the kind of replication to start
    (diskless or not) when master and slave are of different versions.
    (Oran Agra, Salvatore Sanfilippo)
  - [NEW] Log clients details when SLAVEOF command is received.
    (Salvatore Sanfilippo with inputs from Nick Craver and Marc
    Gravell).

- update to 3.0.3
  * [FIX] Fix blocking operations timeout precision when HZ is at
    its default value (not increased) and there are thousands
    of clients connected at the same time. This bug affected
    Sidekiq users that experienced a very long delay for
    BLPOP and similar commands to return for timeout. Check
    commit b029ff1 for more info. (Salvatore Sanfilippo)
  * [FIX] MIGRATE "creating socket: Invalid argument" error fix.
    Check issues #2609 and #2612 for more info.
    (Salvatore Sanfilippo)
  * [FIX] Be able to connect to the master even when the slave is
    bound to just the loopback interface and has no valid
    public address in the network the master is reacahble.
    (Salvatore Sanfilippo)
  * [FIX] ZADD with options encoding promotion fixed. (linfangrong)
  * [FIX] Reset aof_delayed_fsync on CONFIG RESETSTATS. (Tom Kiemes)
  * [FIX] PFCOUNT key parsing in cluster fixed. (MOON_CLJ)
  * [FIX] Fix Solaris compilation of Redis 3.0. (Jan-Erik Rediger)
  * [NEW] Variadic EXISTS command. Now the command accepts multiple
    arguments and returns the total count of existing keys.
- added missing sentinel link

- also pass the bind address to the redis-cli for shutdown
  (boo#835815)

- update to 3.0.2
  * [FIX] Critical security issue fix by Ben Murphy:
    http://t.co/LpGTyZmfS7
  * [FIX] SMOVE reply fixed when src and dst keys are the same.
    (Glenn Nethercutt)
  * [FIX] Lua cmsgpack lib updated to support str8 type.
    (Sebastian Waisbrot)
  * [NEW] ZADD support for options: NX, XX, CH. See new doc at
    redis.io.  (Salvatore Sanfilippo)
  * [NEW] Senitnel: CKQUORUM and FLUSHCONFIG commands back ported.
    (Salvatore Sanfilippo)

- update to 3.0.1
  * Sentinel memory leak due to hiredis fixed.
  * Sentinel memory leak on duplicated instance.
  * Redis crash on Lua reaching output buffer limits.
  * Sentinel flushes config on +slave events.

- update to 3.0.0
  >> What's new in Redis 3.0 compared to Redis 2.8?
  * Redis Cluster: a distributed implementation of a subset of Redis.
  * New "embedded string" object encoding resulting in less cache
    misses. Big speed gain under certain work loads.
  * AOF child -> parent final data transmission to minimize latency
    due to "last write" during AOF rewrites.
  * Much improved LRU approximation algorithm for keys eviction.
  * WAIT command to block waiting for a write to be transmitted
    to the specified number of slaves.
  * MIGRATE connection caching. Much faster keys migraitons.
  * MIGARTE new options COPY and REPLACE.
  * CLIENT PAUSE command: stop processing client requests for a
    specified amount of time.
  * BITCOUNT performance improvements.
  * CONFIG SET accepts memory values in different units (for
    example you can use "CONFIG SET maxmemory 1gb").
  * Redis log format slightly changed reporting in each line the
    role of the instance (master/slave) or if it's a saving child
    log.
  * INCR performance improvements.
  >> Refactoring changes (no new features nor bug fixes)
  * Blocking operations full refactoring (blocked.c)
  * Client output buffer memory tracking refactored.
  for all the details see
    /usr/share/doc/packages/redis/00-RELEASENOTES
- refreshed redis-enable-bactrace-on-x86-and-ia64-only.patch to
  apply cleanly

- make sure we do not daemonize

- finished systemd support

- update to 2.8.19
  - Don't log admin commands in MONITOR. (antirez)
  - List of commands flagged as admin commands modified. (antirez)
  - Lua cmsgpack lib updated to latest version. (antirez)
  - Add symlink to redis-sentinel during make install (Rhommel
    Lamas)
  - SORT: Don't sort Set elements if not needed. (antirez)
  - Fix zero-ordering SORT when called against lists (Matt
    Stancliff)
  - Update redis_init_script.tpl (Ben Dowling)
  - FIXED redis-benchmark's idle mode.With idle mode shouldn't
    create write event (zhanghailei)
  - zipmap.c: update comments above (Sun He)
  - replaced // comments  #2150 (Deepak Verma)
  - redis-benchmark AUTH command to be discarded after the first
    send #2150 (azure provisioned user)
  - sds.c: Correct two spelling mistakes in comments (Sun He)
  - sds.c/sdscatvprintf: set va_end to finish va_list cpy (Sun He)
  - sds.c: Correct some comments (Sun He)
  - Update whatisdoing.sh (Serghei Iakovlev)
  - Include stropts only if __sun is defined. (antirez)
  - Fix implicit declaration of ioctl on Solaris (Jan-Erik Rediger)
  - Silence _BSD_SOURCE warnings in glibc 2.20 and forward (Johan
    Bergström)
  - Mark whatisdoing.sh as deprecated in top-comment. (antirez)
  - getting pid fixes (Serghei Iakovlev)
  - sparkline.c: AddSample skip Empty label (Sun He)
  - sparkline.c: mov label-ini into the AddSample Function (Sun He)
  - Only ignore sigpipe in interactive mode (Jan-Erik Rediger)
  - Simplify lua_cmsgpack macro and fix build on old Linux distros.
    (antirez)

- redis requires sudo for the systemv-init script.
  As of openSUSE 13.2 sudo is not implicitly included in the dependency tree.

- update to 2.8.18
  * [FIX] Linenoise updated to be more VT100 compatible. (Salvatore Sanfilippo)
  * [FIX] A number of typos fixed inside comments. (Various authors)
  * [FIX] redis-cli no longer quits after long timeouts. (Matt Stancliff)
  * [FIX] Test framework improved to detect never terminating scripts, cleanup
    instances on crashes. (Salvatore Sanfilippo)
  * [FIX] PFCOUNT can be used on slaves now. (Salvatore Sanfilippo)
  * [FIX] ZSCAN no longer report very small scores as 0. (Matt Stancliff,
    Michael Grunder, Salvatore Sanfilippo)
  * [FIX] Don't show the ASCII logo if syslog is enabled. Redis is now
    an Enterprise Grade product. (Salvatore Sanfilippo)
  * [NEW] EXPERIMENTAL: Diskless replication, for more info check the doc at
    http://redis.io/topics/replication. (Salvatore Sanfilippo).
  * [NEW] Transparent Huge Pages detection and reporting in logs and
    LATENCY DOCTOR output. (Salvatore Sanfilippo)
  * [NEW] Many Lua scripting enhancements: Bitops API, cjson upgrade and tests,
    cmsgpack upgrade. (Matt Stancliff)
  * [NEW] Total and instantaneous Network bandwidth tracking in INFO.
  * [NEW] DEBUG POPULATE two args form implemented (old form still works).
    The second argument is the key prefix. Default is "key:" (Salvatore
    Sanfilippo)
  * [NEW] Check that tcp-backlog is matched by /proc/sys/net/core/somaxconn, and
    warn about it if not. (Salvatore Sanfilippo)
  for the rest see /usr/share/doc/packages/redis/00-RELEASENOTES

- fix bashisms in pre script

- remove unused skip-aof-test.patch

- update to 2.8.13
  * [FIX] CLIENT KILL minor backward compatibility fixes.
    (Salvatore Sanfilippo)
  * [FIX] Enable HAVE_ATOMIC for PowerPC. (Matt Stancliff)
  * [FIX] More robust PSYNC and AOF rewrites tests.
    (Salvatore Sanfilippo)
  * [FIX] Solaris build fixed.
    (Matt Stancliff, Salvatore Sanfilippo)
  * [NEW] The new latency monitoring feature, as documented at
    http://redis.io/topics/latency-monitor
    (Salvatore Sanfilippo)
  * [NEW] The COMMAND command, exposing the Redis command table
    as an API. (Matt Stancliff)
  * [NEW] Update used memory with C11 __atomic. (Matt Stancliff)
- additional changes from 2.8.12
  * [FIX / BREAKS BACKWARD COMPATIBILITY] Using SELECT inside Lua
    scripts no longer makes the selected DB to be set in the
    calling client.  So Lua can still use SELECT, but the client
    calling the script will remain set to the original DB. Thix
    fixes an issue with Redis replication of Lua scripts that
    called SELECT without reverting the selected DB to the original
    one. (Salvatore Sanfilippo)
  * [FIX] Sentinel failover was instalbe if the master was detected
    as available during the failover (especially during manual
    failovers) because of an implementation error (lack of checking
    of SRI_PROMOTED flag). (Salvatore Sanfilippo)
  * [FIX] Cancel SHUTDOWN if initial AOF is being written.
    (Matt Stancliff)
  * [FIX] Sentinel: bind source address for outcoming connections.
    (Matt Stancliff).
  * [FIX] Less timing sensitive Sentinel tests.
    (Salvatore Sanfilippo).
  * [NEW] redis-cli --intrinsic-latency stopped with SIGINT still
    reports stats (Matt Stancliff)
  * [NEW] Sentinels broadcast an HELLO message ASAP after a
    failover in order to reach a consistent state faster (before it
    relied for periodic HELLO messages). (Salvatore Sanfilippo).
  * [NEW] Jemalloc updated to 3.6.0. (Salvatore Sanfilippo)
  * [NEW] CLIENT LIST speedup. (Salvatore Sanfilippo)
  * [NEW] CLIENT LIST new unique incremental ID to every client.
    (Salvatore Sanfilippo)
  * [NEW] ROLE command added. (Salvatore Sanfilippo)
  * [NEW] CLIENT KILL new form to kill by client type and ID (see
    doc at redis.io for more info). (Salvatore Sanfilippo)
  * [NEW] Sentinel now disconnects clients when instances are
    reconfigured (see http://redis.io/topics/sentinel-clients).
    (Salvatore Sanfilippo)
  * [NEW] Hiredis update to latest version. (Matt Stancliff)
- additional changes from 2.8.11
  [#] UPGRADE URGENCY: HIGH if you use Lua scripting, LOW otherwise.
  * [FIX] A previous fix for Lua -> Redis numerical precision
    enhancement introduced a new problem. In Redis 2.8.10 commands
    called from Lua passing a string that "looks like" a very large
    number, may actually use as argument the string converted as a
    float. This bug is now fixed.
  * [FIX] Now commands other than *PUSH* adding elements to a list
    will be able to awake clients blocked in a blocking POP
    operation.
  * [FIX] Cygwin compilation fixes.
- additional changes from 2.8.10
  [#] UPGRADE URGENCY: HIGH if you use min-slaves-to-write option.
  * [FIX] IMPORTANT! A min-slaves-to-write option active in a slave
    totally prevented the slave from acception the master stream of
    commands.  This release includes testes for
    min-slaves-to-write, and a fix for this issue.
  * [FIX] Sometimes DEL returned 1 for already expired keys. Fixed.
  * [FIX] Fix test false positive because new osx 'leaks' output.
  * [FIX] PFCOUNT HLL cache invalidation fixed: no wrong value was
    reported but the cache was not used at all, leading to lower
    performances.
  * [FIX] Accept(2) multiple clients per readable-event invocation,
    and better processing of I/O while loading or busy running a
    timedout script.  Basically now the LOADING / BUSY errors are
    reported at a decent speed.
  * [FIX] A softwaer watchdog crash fixed.
  * [FIX] Fixed a Lua -> Redis numerical precision loss.
  * [NEW] Lua scripting engine speed improved.
  * [NEW] Sentinel generates one new event for humans to understand
    better what is happening during a failover:
    +config-update-from.  Also the time at which a failover will be
    re-attempted is logged.
- additional changes from 2.8.9
  [#] UPGRADE URGENCY: LOW, only new features introduced, no bugs fixed.
  * [NEW] The HyperLogLog data structure. You can read more about
    it in this blog post. http://antirez.com/news/75
  * [NEW] The Sorted Set data type has now support for
    lexicographic range queries, check the new commands
    ZRANGEBYLEX, ZLEXCOUNT and ZREMRANGEBYLEX, which are documented
    at http://redis.io.
- additional changes from 2.8.8
  [#] UPGRADE URGENCY: HIGH for Redis, LOW for Sentinel. There is a
    potentially critical bug fix causing data loss in Redis but it
    requires a combination of disk full and the use of the SHUTDOWN
    command.
  * [FIX] Fixed data loss when SHUTDOWN was used with a disk full
    condition.
  * [FIX] Fixed a memory leak in the SORT syntax error processing.
  * [FIX] When Sentinel down-after-milliseconds parameter is
    modified at runtime now it gets propagated to all the slaves
    and sentinel instances of the master.
  * [FIX] `install_server.sh` script finally fixed.
  * [FIX] Different fixes to maxclients handling.
  * [NEW] Sentinels are now able to send update messages in a
    peer-to-peer fashion even if no Redis instances are available.
    Now the Sentinel liveness property that the most updated
    configuration in a given partition is propagated to all the
    Sentinels is extended to partitions without reachable
    instances.
  * [NEW] Sentinel safety properties are now ensured in a
    crash-recovery system model since some state is persisted on
    disk before replying to other nodes, and reloaded at startup.
  * [NEW] Sentinel now uses CLIENT SETNAME so that it is easy to
    identify Sentinels using CLIENT LIST among other clients.
  * [NEW] Sentinel failure detection and reconnection code
    improved.
  * [NEW] Use all 24 bits (instead of 22) for the Redis objects LRU
    field.  Note that the new LRU algorithm using eviction pools
    was not backported from unstable for safery / code maturity
    concerns.
  * [NEW] Majory speedup for the INFO command (it is now 6 times
    faster).
  * [NEW] More Sentinel unit tests.
  * [NEW] New command DEBUG ERROR returns the specified error.
    Example: DEBUG ERROR "LOADING database". This is handy to write
    Redis client libraries unit tests.
  * [NEW] redis-cli now supports multi-line editing via updated
    linenoise lib.
  Thanks to Matt Stancliff and Jan-Erik Rediger for the work done
  in the context of this release.
- additional changes from 2.8.7
  [#] UPGRADE URGENCY: LOW for Redis, LOW for Sentinel. However this
    release adds new features so users may want to upgrade in order
    to exploit the new functionalities.
  * [FIX] Sometimes the absolute config file path was obtained in a
    wrong way.  This happened when there was a "dir" directive
    inside the config file and at the same time the configuration
    file was given as a relative path to redis-server or
    redis-sentinel executables.
  * [FIX] redis-cli: Automatically enter --slave mode when SYNC or
    PSYNC are called during an interactive session.
  * [FIX] Sentinel "IDONTKNOW" error removed as it does not made
    sense with the new Sentinel design. This error was actually a
    fix for a design error in the first implementation of Sentinel.
  * [FIX] Sentinel: added a missing exit() call to abort after
    config file checks at startup. This error was introduced with
    an improvement in a previous 2.8 release.
  * [FIX] BITCOUNT: fixed unaligned access causing issues in sparc
    and other archs not capable of dealing with unaligned accesses.
    This also makes the code faster in archs where unaligned
    accesses are allowed.
  * [FIX] Sentinel: better nodes fail over start time
    desynchronization to avoid split-brain during the voting
    process needed to get authorization to fail over. This means
    the system is less likely to need to retry and will fail over
    faster. No changes in behavior / correctness.
  * [FIX] Force INFO used_memory_peak to match peak memory. This
    generated some confusion among users even if it was not an
    actual bug.
  * [NEW] Sentinel unit tests and framework. More tests needed and
    units must be improved in order to have less false positives,
    but it is a start and features a debugging console that is
    useful to fix tests or to inspect bugs causing tests failures.
  * [NEW] New Sentinel events: +/-monitor and +set used to monitor
    when an instance to monitor is added or removed, or when a
    configuration is modified via SENTINEL SET.
  * [NEW] Redis-cli updated to use SCAN instead of random sampling
    via RANDOMKEY in order to implement --bigkeys feature. Moreover
    the implementation now supports pipelining and reports more
    information at the end of the scan. Much faster, much better. A
    special thank you to Michael Grunder for this improvement.
  * [NEW] redis-cli now supports a new --intrinsic-latency mode
    that is able to meter the latency of a system due to kernel /
    hypervisor.  How to use it is explained at
    http://redis.io/topics/latency.
  * [NEW] New command BITPOS: find first bit set or clear in a
    bitmap.
  * [NEW] CONFIG REWRITE calls are now logged.

- update to 2.8.6
  Redis 2.6 is mostly a strict subset of 2.8. However there are a
  few things that you should be aware of:
  The following commands changed behavior:
  * SORT with ALPHA now sorts according to local collation locale
    if no STORE option is used.
  * ZADD/ZINCRBY are now able to accept a bigger range of values
    as valid scores, that is, all the values you may end having
    as a result of calling ZINCRBY multiple times.
  * Many errors are now prefixed by a more specific error code
    instead of the generic -ERR, for example -WRONGTYPE, -NOAUTH, ...
  * PUBLISH called inside Lua scripts is now correctly propagated
    to slaves.
  The following redis.conf and CONFIG GET / SET parameters changed:
  * logfile now uses the empty string in order to log to standard
    output, so 'logfile stdout' is now invalid, use 'logfile ""'
    instead.
  The following INFO fields changed format in a non-backward compatible way:
  * The list of slaves in INFO is now in field=value format.
  Replication:
    Redis 2.8 can be used as slave for Redis 2.6, but doing this is
    only a good idea for the short amount of time needed to upgrade
    your servers.  We suggest to update both master and slaves at
    about the same time.
  For all the details see
    /usr/share/doc/packages/redis/00-RELEASENOTES
- updated redis-conf.patch to apply cleanly again

- drop skip-aof-test.patch

- drop skip-aof-test.patch