python-pika-1.1.0-bp152.2.1

- Switch from using nosetest runner to pytest

- Update to 1.1.0:
  * various bugfixes
- Drop merged patch e95001e480ec30f1617c47e77fb92e0384ff9e78.patch

- Fix build for older distros which fail with
  UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 4575: \
    ordinal not in range(128)
  Added e95001e480ec30f1617c47e77fb92e0384ff9e78.patch

- update to 1.0.1
  * API docstring updates
  * Twisted adapter: Add basic_consume Deferred to the call list

- update to 1.0.0
  * AsyncioConnection, TornadoConnection and TwistedProtocolConnection
    are no longer auto-imported
  * BlockingConnection.consume now returns (None, None, None) when inactivity
    timeout is reached
  * Python 3.7 support
  * all_channels parameter of the Channel.basic_qos method renamed to global_qos
  * global_ parameter of the Basic.Qos spec class renamed to global_qos
  * NOTE: heartbeat_interval is removed, use heartbeat instead.
  * NOTE: The backpressure_detection option of ConnectionParameters
    and URLParameters property is REMOVED in favor of Connection.Blocked
    and Connection.Unblocked. See Connection.add_on_connection_blocked_callback

- Update to 0.13.1:
  * URLParameters with SSL options not working

- Update to 0.13.0:
  * AsyncioConnection, TornadoConnection and TwistedProtocolConnection are no longer auto-imported
  * Python 3.7 support
- Drop merged patch 1119-increase_timeouts.patch

- Add 1119-increase_timeouts.patch to increase timeouts and hopefully
  make tests more resilient.

- Fix %files section double inclduing egg files.

- Switch to github tarball in order to get tests
- Run the tests

- Version update to 0.12.0:
  * BlockingConnection now supports the add_callback_threadsafe method which
    allows a function to be executed correctly on the IO loop thread.

- Added Dep: Pika requires ssl python module provided by python
- Fix license macro

- Update to 0.11.0:
  * Simplify Travis CI configuration for OS X.
  * Add asyncio connection adapter for Python 3.4 and newer.
  * Connection failures that occur after the socket is opened and
    before the AMQP connection is ready to go are now reported by
    calling the connection error callback. Previously these were
    not consistently reported.
  * In BaseConnection.close, call _handle_ioloop_stop only if the
    connection is already closed to allow the asynchronous close
    operation to complete gracefully.
  * Pass error information from failed socket connection to user
    callbacks on_open_error_callback and on_close_callback with
    result_code=-1.
  * ValueError is raised when a completion callback is passed to an
    asynchronous (nowait) Channel operation. It's an application
    error to pass a non-None completion callback with an
    asynchronous request, because this callback can never be
    serviced in the asynchronous scenario.
  * Channel.basic_reject fixed to allow delivery_tag to be of type
    long as well as int. (by quantum5)
  * Implemented support for blocked connection timeouts in
    pika.connection.Connection. This feature is available to all
    pika adapters. See pika.connection.ConnectionParameters
    docstring to learn more about blocked_connection_timeout
    configuration.
  * Deprecated the heartbeat_interval arg in
    pika.ConnectionParameters in favor of the heartbeat arg for
    consistency with the other connection parameters classes
    pika.connection.Parameters and pika.URLParameters.
  * When the port arg is not set explicitly in ConnectionParameters
    constructor, but the ssl arg is set explicitly, then set the
    port value to to the default AMQP SSL port if SSL is enabled,
    otherwise to the default AMQP plaintext port.
  * URLParameters will raise ValueError if a non-empty URL scheme
    other than {amqp | amqps | http | https} is specified.
  * InvalidMinimumFrameSize and InvalidMaximumFrameSize exceptions
    are deprecated. pika.connection.Parameters.frame_max property
    setter now raises the standard ValueError exception when the
    value is out of bounds.
  * Removed deprecated parameter type in Channel.exchange_declare
    and BlockingChannel.exchnage_declare in favor of the
    exchange_type arg that doesn't overshadow the builtin type
    keyword.
  * Channel.close() on OPENING channel transitions it to CLOSING
    instead of raising ChannelClosed.
  * Channel.close() on CLOSING channel raises
    ChannelAlreadyClosing; used to raise ChannelClosed.
  * Connection.channel() raises ConnectionClosed if connection is
    not in OPEN state.
  * When performing graceful close on a channel and Channel.Close
    from broker arrives while waiting for CloseOk, don't release
    the channel number until CloseOk arrives to avoid race
    condition that may lead to a new channel receiving the CloseOk
    that was destined for the closing channel.
  * The backpressure_detection option of ConnectionParameters and
    URLParameters property is DEPRECATED in favor of
    Connection.Blocked and Connection.Unblocked. See
    Connection.add_on_connection_blocked_callback.

- switch to singlespec

- update to 0.10.0:
  * LibevConnection: Fixed dict chgd size during iteration
  * SelectConnection: Fixed KeyError exceptions in IOLoop timeout executions
  * BlockingConnection: Add support to make BlockingConnection a Context Manager
  * f72b58f - Fixed failure to purge _ConsumerCancellationEvt from
    BlockingChannel._pending_events during basic_cancel.
  * Change to 3-Clause BSD License
  * Python 3.x support
  * Over 150 commits from 19 contributors
  * Refactoring of SelectConnection ioloop
  * This major release contains certain non-backward-compatible API changes as
    well as significant performance improvements in the BlockingConnection
    adapter.
  * Non-backward-compatible changes in Channel.add_on_return_callback
    callback’s signature.
  * The AsynchoreConnection adapter was retired
  * see also https://pika.readthedocs.org/en/0.10.0/version_history.html
- Add and update LICENSE. It's now BSD-3-Clause
- Remove README.md . It's shipped as README.rst in the upstream tarball

- Update to version 0.9.14
  + Major issue with socket buffer refactor in 0.9.13 (#328) fixes by cooper6581 and Erik Andersson
  + Fix a bug in SelectConnection that did not allow for a IOLoop to be restarted (#337) fix by Ralf Nyrén
  + Fix an issue in BlockingConnection disconnections (#340) fix by Mark Unsworth
  + Add NullHandler to prevent logging warnings when not configured (#339) by Cenk Altı
  + Added Twisted Adapter example (#314) by nolinksoft

- Update to version 0.9.13
  + IPv6 Support
  + Officially remove support for <= Python 2.5 even though it was
    broken already
  + Drop pika.simplebuffer.SimpleBuffer in favor of the Python stdlib
    collections.deque object
  + New default object for receiving content is a “bytes” object which
    is a str wrapper in Python 2, but paves way for Python 3 support
  + New “Raw” mode for frame decoding content frames (#334) addresses
    issues #331, #229
  + Connection and Disconnection logic refactored, allowing for cleaner
    separation of protocol logic and socket handling logic as well as
    connection state management
  + New “on_open_error_callback” argument in creating connection
    objects and new Connection.add_on_open_error_callback method
  + New Connection.connect method to cleanly allow for reconnection code
  + Support for all AMQP field types, using protocol specified
    signed/unsigned unpacking
  + Method signature for creating connection objects has new argument
    “on_open_error_callback” which is positionally before “on_close_callback”
  + Internal callback variable names in connection.Connection have been
    renamed and constants used. If you relied on any of these callbacks
    outside of their internal use, make sure to check out the new constants.
  + Connection._connect method, which was an internal only method is now
    deprecated and will raise a DeprecationWarning. If you relied on
    this method, your code needs to change.
  + pika.simplebuffer has been removed
  + BlockingConnection consumer generator does not free buffer
    when exited (#328)
  + Unicode body payloads in the blocking adapter raises exception (#333)
  + Support “b” short-short-int AMQP data type (#318)
  + Docstring type fix in adapters/select_connection (#316)
  + IPv6 not supported (#309)
  + Stop the HeartbeatChecker when connection is closed (#307)
  + Unittest fix for SelectConnection (#336)
  + Handle condition where no connection or socket exists but
    SelectConnection needs a timeout for retrying a connection (#322)
  + TwistedAdapter lagging behind BaseConnection changes (#321)
  + Refactored documentation
  + Added Twisted Adapter example (#314)
- Remove CFLAGS definition
- Remove redundant %clean section

- Add REAMDE.md
- Fix License tag

- Update to version 0.9.12:
  - Bugfix: New timeout id hashing was not unique

- Update to version 0.9.11:
- Changes from 0.9.10
  - Address inconsistent channel close callback documentation and add the signature change to the TwistedChannel class (#305)
  - Address a missed timeout related internal data structure name change introduced in the SelectConnection 0.9.10 release. Update all connection adapters to use same signature and docstring (#306).

- Updated to version 0.9.10:
- Changes from 0.9.9 to 0.9.10
  - Fix timeout in twisted adapter (Submitted by cellscape)
  - Fix blocking_connection poll timer resolution to milliseconds (Submitted by cellscape)
  - Fix channel._on_close() without a method frame (Submitted by Richard Boulton)
  - Addressed exception on close (Issue #279 - fix by patcpsc)
  - 'messages' not initialized in BlockingConnection.cancel() (Issue #289 fix by Mik Kocikowski)
  - Make queue_unbind behave like queue_bind (Issue #277)
  - Address closing behavioral issues for connections and channels (Issue #275)
  - Pass a Method frame to Channel._on_close in Connection._on_disconnect (Submitted by Jan Urba?ski)
  - Fix channel closed callback signature in the Twisted adapter (Submitted by Jan Urba?ski)
  - Don't stop the IOLoop on connection close for in the Twisted adapter (Submitted by Jan Urba?ski)
  - Update the asynchronous examples to fix reconnecting and have it work
  - Warn if the socket was closed such as if RabbitMQ dies without a Close frame
  - Fix URLParameters ssl_options (Issue #296)
  - Add state to BlockingConnection addressing (Issue #301)
  - Encode unicode body content prior to publishing (Issue #282)
  - Fix an issue with unicode keys in BasicProperties headers key (Issue #280)
  - Change how timeout ids are generated (Issue #254)
  - Address post close state issues in Channel (Issue #302)
  - Change core connection communication behavior to prefer outbound writes over reads, addressing a recursion issue
  - Update connection on close callbacks, changing callback method signature
  - Update channel on close callbacks, changing callback method signature
  - Give more info in the ChannelClosed exception
  - Change the constructor signature for BlockingConnection, block open/close callbacks
  - Disable the use of add_on_open_callback/add_on_close_callback methods in BlockingConnection
- Changes from 0.9.8 to 0.9.9 - lots of bufixes:
  - Only remove the tornado_connection.TornadoConnection file descriptor from the IOLoop if it?s still open (Issue #221)
  - Allow messages with no body (Issue #227)
  - Allow for empty routing keys (Issue #224)
  - Don?t raise an exception when trying to send a frame to a closed connection (Issue #229)
  - Only send a Connection.CloseOk if the connection is still open. (Issue #236 Fix by noleaf)
  - Fix timeout threshold in blocking connection - (Issue #232 - Fix by Adam Flynn)
  - Fix closing connection while a channel is still open (Issue #230 - Fix by Adam Flynn)
  - Fixed misleading warning and exception messages in BaseConnection (Issue #237 Fix by Tristan Penman)
  - Pluralised and altered the wording of the AMQPConnectionError exception (Issue #237 - Fix by Tristan Penman)
  - Fixed _adapter_disconnect in TornadoConnection class (Issue #237 Fix by Tristan Penman)
  - Fixing hang when closing connection without any channel in BlockingConnection (Issue #244 Fix by Ales Teska)
  - Remove the process_timeouts() call in SelectConnection (Issue #239)
  - Change the string validation to basestring for host connection parameters (Issue #231)
  - Add a poller to the BlockingConnection to address latency issues introduced in Pika 0.9.8 (Issue #242)
  - reply_code and reply_text is not set in ChannelException (Issue #250)
  - Add the missing constraint parameter for Channel._on_return callback processing (Issue #257 - Fix by patcpsc)
  - Channel callbacks not being removed from callback manager when channel is closed or deleted (Issue #261)

- Fixed License: tag

- Updated to version 0.9.8:
- Bugfixes
  - Channel.queue_declare/BlockingChannel.queue_declare not setting up callbacks property for empty queue name (Issue #218)
  - Channel.queue_bind/BlockingChannel.queue_bind not allowing empty routing key
  - Connection._on_connection_closed calling wrong method in Channel (Issue #219)
  - Fix tx_commit and tx_rollback bugs in BlockingChannel (Issue #217)
- Changes from version 0.9.6 to 0.9.7:
- New features
  - generator based consumer in BlockingChannel (See Using the BlockingChannel.consume generator to consume messages for example)
- Changes
  - BlockingChannel._send_method will only wait if explicitly told to
- Bugfixes
  - Added the exchange ?type? parameter back but issue a DeprecationWarning
  - Dont require a queue name in Channel.queue_declare()
  - Fixed KeyError when processing timeouts (Issue # 215 - Fix by Raphael De Giusti)
  - Don?t try and close channels when the connection is closed (Issue #216 - Fix by Charles Law)
  - Dont raise UnexpectedFrame exceptions, log them instead
  - Handle multiple synchronous RPC calls made without waiting for the call result (Issues #192, #204, #211)
  - Typo in docs (Issue #207 Fix by Luca Wehrstedt)
  - Only sleep on connection failure when retry attempts are > 0 (Issue #200)
  - Bypass _rpc method and just send frames for Basic.Ack, Basic.Nack, Basic.Reject (Issue #205)

`
- Updated to version 0.9.6
- New features and highlights:
  - Delivery confirmation support
  - New URLParameters class for connecting with AMQP URLs
  - BlockingConnection will raise exceptions for various events, such as
  channel and connection closures.
  - New BlockingConnection methods:
  - process_data_events() - Force BlockingConnection to check for pending
  events from RabbitMQ
  - sleep() - Sleep without blocking communication with RabbitMQ
  - New BlockingChannel methods:
  - start_consuming()
  - stop_consuming()
  - Back-pressure detection is now optional via a connection parameter
  - Configurable IOLoop stopping on asynchronous adapters
  - Rewritten unit test coverage from the ground up. While not complete, it
  is a significant improvement over previous releases.
- Major bugfix areas:
  - Connection handling
  - Blocking functionality in the BlockingConnection
  - SSL
  - UTF-8 Handling
- Things removed:
  - pika.reconnection_strategies
  - pika.channel.ChannelTransport
  - pika.log
  - pika.template
  - examples directory, adding examples to documentation instead.
  - functional tests

- Updated to version 0.9.5
- Spec regenerated from PIP using py2pack

- The entire module is platform-independent, so lets make it noarch.

- Initial package