python-icalendar-4.0.5-bp154.1.32

- %python3_only -> %python_alternative

- update to 4.0.5
  * Fixed a docs issue related to building on Read the Docs

- update to 4.0.4:
  - Reduce Hypothesis iterations to speed up testing, allowing PRs to pass

- Fix fdupes and pytest calls

- Remove no longer necessary pytest argument
  - k 'not test_create_america_new_york'

- Version update to 4.0.3
  * Categories are comma separated not 1 per line #265.
  * mark test with mixed timezoneaware and naive datetimes as an expected
    failure.

- Explicitly require hypothesis as it is requested in setup.py

- Version update to 4.0.2:
  * Update all pypi.python.org URLs to pypi.org
  * Added rudimentary command line interface.
  * Readme, setup and travis updates.
  * Drop support for Python 2.6 and 3.3.
  * Accept Windows timezone identifiers as valid. #242
  * Fix ResourceWarnings in setup.py when Python warnings are enabled. #244
  * Fix invalid escape sequences in string and bytes literals. #245
  * Include license file in the generated wheel package. #243
  * Fix non-ASCII TZID and TZNAME parameter handling. #238
  * Docs: update install instructions. #240
  * added vUTCOffset.ignore_exceptions to allow surpressing of failed TZOFFSET parsing (for now this ignores the check for offsets > 24h)
  * Fix VTIMEZONEs including RDATEs #234.
- Update URL to point to the repo rather than to docs
- Use %license for license install

- Update to version 3.11.5
  * added an assertion that VTIMEZONE sub-components' DTSTART must
    be of type DATETIME [geier]
  * Fix handling of VTIMEZONEs with subcomponents with the same
    DTSTARTs and OFFSETs but which are of different types  [geier]
  3.11.4:
  * Don't break on parameter values which contain equal signs,
    e.g. base64 encoded binary data [geier]
  * Fix handling of VTIMEZONEs with subcomponents with the same
    DTSTARTs. [geier]
  3.11.3:
  * Removed ``setuptools`` as a dependency as it was only required
    by setup.py and not by the package.
  * Don't split content lines on the unicode ``LINE SEPARATOR``
    character ``\u2028`` but only on ``CRLF`` or ``LF``.
- Converted to single-spec

- correct source url

- update to version 3.11.2 (2017-01-12)
  - Run tests with python 3.5 and 3.6. [geier]
  - Allow tests failing with pypy3 on travis.ci. [geier]
- update to version 3.11.1 (2016-12-19)
  - Encode error message before adding it to the stack of collected error
    messages.
- update to version 3.11 (2016-11-18)
  - Successfully test with pypy and pypy3. [gforcada]
  - Minor documentation update. [tpltnt]
- update to version 3.10 (2016-05-26)
  - Updated components description to better comply with RFC 5545. Refs #183.
    [stlaz]
  - Added PERIOD value type to date types. Also fixes incompatibilities
    described in #184. Refs #189. [stlaz]
  - Fix testsuite for use with dateutil>=2.5. Refs #195. [untitaker]
  - Reintroduce cal.Component.is_broken that was removed with 3.9.2. Refs #185.
    [geier]
- update to version 3.9.2 (2016-02-05)
  - Defined test_suite in setup.py. Now tests can be run via python setup.py
    test. [geier]
  - Fixed cal.Component.from_ical() representing an unknown component as one of
    the known. [stlaz]
  - Fixed possible IndexError exception during parsing of an ical string. [stlaz]
  - When doing a boolean test on icalendar.cal.Component, always return True.
    Before it was returning False due to CaselessDict, if it didn’t contain any
    items. [stlaz]
  - Fixed date-time being recognized as date or time during parsing. Added
    better error handling to parsing from ical strings. [stlaz]
  - Added __version__ attribute to init.py. [TomTry]
  - Documentation fixes. [TomTry]
  - Pep 8, UTF 8 headers, dict/list calls to literals. [thet]

- adjust to python-python-dateutil renaming

- Removed not needed run time dependency on unittest2

- Update to 3.9.1:
  - Fix vPeriod.__repr__. [spacekpe]
  - Improve foldline() performance. This improves the foldline
    performance, especially for large strings like base64-encoded
    inline attachements. In some cases (1MB string) from 7 Minutes
    to less than 20ms for ASCII data and 500ms for non-ASCII data.
    Ref: #163. [emfree]

- Fix building on SLES 11

- Update to 3.9.0:
  - Creating timezone objects from VTIMEZONE components.
  - Make ``python-dateutil`` a dependency.
  - Made RRULE tolerant of trailing semicolons.
  - Documentation fixes.
- Use .tar.gz as Source
- Add missing dependency on pytz, dateutil
- Run testsuite in %check and adjust build requires

update to version 3.8.4 changelog from 3.5
- 3.8.4 (2014-11-01)
  * Add missing BYWEEKNO to recurrence rules. [russkel]
- 3.8.3 (2014-08-26)
  * PERCENT property in VTODO renamed to PERCENT-COMPLETE, according to RFC5545. [thomascube]
- 3.8.2 (2014-07-22)
  * Exclude editor backup files from egg distributions. Fixes #144. [thet]
- 3.8.1 (2014-07-17)
  * The representation of CaselessDicts in 3.8 changed the name attribute of Components and therefore broke the external API. This has been fixed. [untitaker]
- 3.8 (2014-07-17)
  * Allow dots in property names (Needed for vCard compatibility). Refs #143. [untitaker]
  * Change class representation for CaselessDict objects to always include the class name or the class' name attribute, if available. Also show subcomponents for Component objects. [thet]
  * Don't use data_encode for CaselessDict class representation but use dict's __repr__ method. [t-8ch]
  * Handle parameters with multiple values, which is needed for vCard 3.0. Refs #142. [t-8ch]
- 3.7 (2014-06-02)
  * For components with ignore_exceptions set to True, mark unparseable lines as broken instead rising a ValueError. VEVENT components have ignore_exceptions set to True by default. Ref #131. Fixes #104. [jkiang13]
  * Make python-dateutil a soft-dependency. [boltnev]
  * Add optional sorted parameter to Component.to_ical. Setting it to false allows the user to preserve the original property and parameter order. Ref #136. Fixes #133. [untitaker]
  * Fix tests for latest pytz. Don't set tzinfo directly on datetime objects, but use pytz's localize function. Ref #138. [untitaker, thet]
  * Remove incorrect use of __all__. We don't encourage using from package import * imports. Fixes #129. [eric-wieser]
- 3.6.2 (2014-04-05)
  * Pep8 and cleanup. [lasudry]
- 3.6.1 (2014-01-13)
  * Open text files referenced by setup.py as utf-8, no matter what the locale settings are set to. Fixes #122. [sochotnicky]
  * Add tox.ini to source tarball, which simplifies testing for in distributions. [sochotnicky]
- 3.6 (2014-01-06)
  * Python3 (3.3+) + Python 2 (2.6+) support [geier]
  * Made sure to_ical() always returns bytes [geier]
  * Support adding lists to a component property, which value already was a list and remove the Component.set method, which was only used by the add method. [thet]
  * Remove ability to add property parameters via a value's params attribute when adding via cal.add (that was only possible for custom value objects and makes up a strange API), but support a parameter attribute on cal.add's method signature to pass a dictionary with property parameter key/value pairs. Fixes #116. [thet]
  * Backport some of Regebro's changes from his regebro-refactor branch. [thet]
  * Raise explicit error on another malformed content line case. [hajdbo]
  * Correctly parse datetime component property values with timezone information when parsed from ical strings. [untitaker]

- Use tarball from https://pypi.python.org/
- Fix download link used as source

- New upstream release 3.5
- Changelog for 3.5
  * Let to_unicode be more graceful for non-unicode strings, as like CMFPlone’s safe_unicode does it. [thet]
- Changelog for 3.4
  * Switch to unicode internally. This should fix all en/decoding errors. [thet]
  * Support for non-ascii parameter values. Fixes #88. [warvariuc]
  * Added functions to transform chars in string with ‘\’ + any of r’,;:’ chars into ‘%{:02X}’ form to avoid splitting on chars escaped with ‘\’. [warvariuc]
  * Allow seconds in vUTCOffset properties. Fixes #55. [thet]
  * Let Component.decode better handle vRecur and vDDDLists properties. Fixes #70. [thet]
  * Don’t let Component.add re-encode already encoded values. This simplifies the API, since there is no need explicitly pass encode=False. Fixes #82. [thet]
  * Rename tzinfo_from_dt to tzid_from_dt, which is what it does. [thet]
  * More support for dateutil parsed tzinfo objects. Fixes #89. [leo-naeka]
  * Remove python-dateutil version fix at all. Current python-dateutil has Py3 and Py2 compatibility. [thet]
  * Declare the required python-dateutil dependency in setup.py. Fixes #90. [kleink]
  * Raise test coverage. [thet]
  * Remove interfaces module, as it is unused. [thet]
  * Remove test_doctests.py, test suite already created properly in test_icalendar.py. [rnix]
  * Transformed doctests into unittests, Test fixes and cleanup. [warvariuc]

- Require python-setuptools instead of distribute (upstreams merged)

- Update to version 3.3:
  * Drop support for Python < 2.6.
  * Allow vGeo to be instantiated with list and not only tuples of geo
    coordinates. Fixes #83.
  * Don't force to pass a list to vDDDLists and allow setting individual
    RDATE and EXDATE values without having to wrap them in a list.
  * Fix encoding function to allow setting RDATE and EXDATE values and not
    to have bypass encoding with an icalendar property.
  * Allow setting of timezone for vDDDLists and support timezone properties
    for RDATE and EXDATE component properties.
  * Move setting of TZID properties to vDDDTypes, where it belongs to.
  * Use @staticmethod decorator instead of wrapper function.
  * Extend quoting of parameter values to all of those characters: ",;: ?'".
    This fixes an outlook incompatibility with some characters. Fixes: #79, Fixes: #81.
  * Define VTIMETZONE subcomponents STANDARD and DAYLIGHT for RFC5545 compliance.
- Remove the "Clean" section, useless.

- Fix building on SLES

- Update to 3.1:
  * Make sure parameters to certain properties propagate to the ical output.
  * Re-include doctests.
  * endure correct datatype at instance creation time in ``prop.vCalAddress``
    and ``prop.vText``.
  * Apply TZID parameter to datetimes parsed from RECURRENCE-ID
  * Localize datetimes for timezones to avoid DST transition errors.
  * Allow UTC-OFFSET property value data types in seconds, which follows
    RFC5545 specification.
  * Remove utctz and normalized_timezone methods to simplify the codebase. The
    methods were too tiny to be useful and just used at one place.
  * When using Component.add() to add icalendar properties, force a value
    conversion to UTC for CREATED, DTSTART and LAST-MODIFIED. The RFC expects
    UTC for those properties.
  * Removed last occurrences of old API (from_string).
  * Add 'recursive' argument to property_items() to switch recursive listing.
    For example when parsing a text/calendar text including multiple
    components (e.g. a VCALENDAR with 5 VEVENTs), the previous situation
    required us to look over all properties in VEVENTs even if we just want
    the properties under the VCALENDAR component (VERSION, PRODID, CALSCALE,
    METHOD).
  * All unit tests fixed.
- Remove Sphinx dependency since HTML docs aren't generated anymore.
- Don't rm .swp files anymore, they were removed upstream.

- Fix building on SLE 11
- updated license to BSD-2-Clause
- Note 1: The fork has taken over maintainership and is now the
  official version
- Note 2: The previous package was a git version from what was the
  fork.  The git tarball had version number 3.0, but for
  completeness this changes entry includes changes since the last
  official release, 2.2
- Update to 3.0.1b2
  * For all TZID parameters in DATE-TIME properties, use timezone
    identifiers (e.g. Europe/Vienna) instead of timezone names
    (e.g. CET), as required by RFC5545. Timezone names are used
    together with timezone identifiers in the Timezone components
  * Timezone parsing, issues and test fixes.
  * Since we use pytz for timezones, also use UTC tzinfo object
    from the pytz  library instead of own implementation.
- Update to 3.0.1b1
  * Update Release information.
- Update to 3.0
  * Add API for proper Timezone support. Allow creating ical
    DATE-TIME strings with timezone information from Python
    datetimes with pytz based timezone information and vice versa
  * Unify API to only use to_ical and from_ical and remove string
    casting as a requirement for Python 3 compatibility:
  * New: to_ical.
  * Old: ical, string, as_string and string casting via __str__
    and str.
  * New: from_ical.
  * Old: from_string.

- fix license to be in spdx.org format

- fixed license issue
- closed bug bnx#714664

- fixed fdupes issue

- updated Ownership
- removed rpmlintrc