python-dbus-python-1.2.4-bp152.2.19

- license update: MIT
  SPDX format for MIT license

- add libtool as buildrequire to make the spec file more reliable

- Remove redundant tags/sections from specfile
  (cf. packaging guidelines)
- Use %_smp_mflags for parallel build

- new upstream version 0.83.2 :
  - libdbus 1.2 is still supported, but libdbus >= 1.4 is
  recommended.
  - Make BusConnection.list_activatable_names actually call
  ListActivatableNames, not ListNames
  - Don't override CFLAGS when adding compiler warnings
  - Fix compilation on platforms where Py_ssize_t is larger than
  int, like x86-64
  - fd.o #21831: deserialize empty byte arrays with byte_arrays=True
  as ByteArray(''), not ByteArray('None')
  - fd.o #23278, #25105: fix crashes when trying to append more
  struct entries than the signature allows with libdbus 1.4
  - fd.o #23831: fix crashes when an embedded Python interpreter
  imports dbus, is finalized, is re-initialized, and re-imports
  dbus
  - fd.o #21172: avoid some deprecation warnings in Python 2.6
  - fd.o #15013: add dbus.lowlevel.MESSAGE_TYPE_SIGNAL etc., for
  those who care about message types at a low level
  - When removing signal matches, clean up internal state, avoiding
  a memory leak in long-lived Python processes that connect to
  signals from arbitrarily many object paths (fd.o #17551)
  - When setting the sender of a message, allow it to be
  org.freedesktop.DBus so you can implement a D-Bus daemon in
  pure Python

- Use %_smp_mflags

- use new python macros

- use py_sitedir macro in filelist

- new upstream version 0.83.0
  - Add bindings for DBusServer (thanks to Mathias Hasselmann,
  Huang Peng; fd.o #14322, #15514).
  - Omit the service's traceback from certain D-Bus errors:
  specifically, those that were probably deliberately raised as
  part of an API. Subclasses of DBusException that indicate
  programmer error can turn the traceback back on if it seems
  likely to be useful.
  - Don't emit spurious Error messages if libdbus gives object-path
  handlers a message that isn't a method call (most likely because
  of binding to a locally emitted signal, as in fd.o #14199).
  - Make multiple filters added by Connection.add_message_filter
  work (fd.o #15547, thanks to Huang Peng).
  - Make the API docs build correctly when out-of-tree
  - Require dbus 1.0 so we can get rid of DBUS_API_SUBJECT_TO_CHANGE

- supplying reply_handler but not error_handler raises
  MissingReplyHandlerException instead of
  MissingErrorHandlerException, and vice versa (fd.o #12304, patch
  from René Neumann)
- Using non-recursive make for dbus/ directory should fix builds in
  some environments (fd.o #12741)
- Everything is now under the same MIT/X11 license used for
  Collabora code in the previous release
- Added copyright headers to some files that were still missing
  them

- new upstream version 0.82.3 (skipped 0.82.1 and 0.82.2)
  - Don't try to distribute COPYING.LGPL-2.1 - no longer exists
  - Fix NEWS indentation
  - Mention relicensing in NEWS
  - Update NEWS, and add regression tests for fd.o #12096 and
    [#12403]
  - fd.o #12432: fix documentation for remove_from_connection
  - dbus.exceptions.DBusException: allow setting _dbus_error_name
    in subclasses
  - Don't raise KeyError when closing private dbus.Bus.
    (fd.o #12096)
  - Also deprecate private dbus.Bus in favour of
    dbus.bus.BusConnection - the only things you gain from using
    dbus.Bus are the shared-instance behaviour and some strange
    more-than-one-way-to-do-it APIs.
  - Relicense Collabora code under the MIT/X11 license proposed for
    dbus core, removing all references to the LGPL as a result
  - dbus.service: Don't assume that exceptions passed to
    asynchronous callbacks are the same as the pending exception
    (fd.o #12403, https://dev.laptop.org/ticket/3370)
  - Makefile.am, test/Makefile.am: Use @abs_top_builddir@,
    @abs_top_srcdir@
  - This fixes incorrect Python path for docs and tests if doing
    an out-of-tree
  - build using an absolute path for $(srcdir), and is also
    less ugly.
  - Unset dbus_python_released
  - Release 0.82.2
  - Mention in NEWS that API docs are generated by default
  - Reorganise README to reflect that API docs are generated
    by default
  - Mention incompatibility with 0.82.1 more prominently
  - Check for epydoc version >= 3, and default to building API docs
    if available
  - Update NEWS to mention #11623 fix
  - Add rel_path_keyword to @method (fd.o #11623)
  - Avoid deprecated API in cross-test
  - Fix introspection on objects with more than one connection or
    more than one object path (bugs.fd.o #11794)
  - NEWS: mention the solved build problems related to
    python-config
  - Re-fix checking for Python include paths. Use $PYTHON-config
    like in 0.82.1 if we can, use the hard-coded logic from
    versions prior to 0.82.0 if we can't.
  - Complete the .m4 renaming
  - Move dbus-py-add-rst2htmlflag.m4 to jh-add-cflag.m4 - the
    contents of two of the .m4 files were the opposite of what
    they should be
  - Move jh-add-cflag.m4 to dbuspy-add-rst2htmlflag.m4 - the
    contents of two of the .m4 files were the opposite of what
    they should be
  - Revert "Use python-config to get Python cppflags (patch from
    Ubuntu, fd.o #11282)."
  - Python < 2.5 didn't have python-config (although some
    distributions, e.g. Debian and Ubuntu, shipped it as an
    add-on). Even for 2.5, some distributions install it under
    gratuitously different names (hi, Gentoo). As a result, this
    patch needs replacing with one that doesn't rely on having
    python-config.
  - _dbus_bindings/mainloop.c: Remove Watch and Timeout.
    They were never used, and didn't make a great deal of sense.
    I now believe the right direction for pure-Python mainloop
    support is to define a Pythonic main loop abstraction and
    coerce libdbus to fit into it, rather than pretending the
    objects in libdbus' abstraction are Python objects.
  - NEWS: update with timeout fix
  - Measure async call timeout in seconds as intended, not in
    ms (blocking calls already used seconds). Add regression tests
  - test-client: Avoid deprecated usage - explicitly pass
    SessionBus() to BusName ctor
  - Try to avoid importing things from _dbus_bindings when they
    could be imported from public API
  - Bump version to 0.82.1.YYYYMMDD
  - Avoid cpp directives inside macro calls, to be nice to old
    gcc versions
  - NEWS, configure.ac: 0.82.1, the "double precision" release
  - Use PyArg_ParseTuple correctly, fixing the timeout in
    send_message_with_reply and send_message_with_reply_and_block.
    (bugs.fd.o #11489; thanks to Marco Pesenti Gritti for report
    and initial patch)
  - Unset dbus_python_released
  - .gitignore: ignore patch(1) cruft, and detached signatures
    for the release tarballs
  - dbus.proxies: If making a call with ignore_reply=True, don't
    block for introspection
  - dbus.service: use DBUS_INTROSPECT_1_0_XML_DOCTYPE_DECL_NODE
  - Expose HANDLER_RESULT_HANDLED, HANDLER_RESULT_NOT_YET_HANDLED
    as public API in dbus.lowlevel
  - Get stacklevel right on deprecation of not specifying bus in
    BusName.__init__
  - _dbus_bindings: add DBUS_INTROSPECT_1_0_XML_DOCTYPE_DECL_NODE
    etc.
  - Avoid using deprecated dbus_watch_get_fd()
  - dbus.service: Deprecate the omission of the `bus` argument in
    the BusName constructor.
  - Explicit is better than implicit.
  - Stop using interactive-Python syntax in tutorial to reduce
    user confusion. Closes bugs.fd.o #11209.

- drop unneeded epydoc requirement properly

- Escape the usage of %{VERSION} when calling out to rpm.
  RPM 4.14 has %{VERSION} defined as 'the main packages version'.

- drop unneeded epydoc requirement (API docs were not built anyway)

- Rename package from dbus-1-python to python-dbus-python to
  conform to openSUSE package naming guidelines.
- Switch to single-spec version
- Update to version 1.2.4
  + Enhancements:
  * Continous integration metadata for travis-ci.org is now available.
    Similar to dbus, this is split into .travis.yml (Travis-specifics)
    and tools/ci-build.sh (intended to be useful for any CI framework,
    although it does include various workarounds for travis-ci oddities).
    (Simon McVittie)
  + Fixes:
  * Make dbus.version a tuple again, not a list, for consistent sorting.
    This was a regression in 1.2.2. (Debian #816729, Simon McVittie)
  * Use inspect.signature() instead of inspect.getargspec() on Python
    versions that have it. inspect.getargspec() is deprecated in recent
    Python 3 and seems to have disappeared from 3.6 nightly builds.
    (Simon McVittie)
  * Make the tests pass in "narrow" Python builds where unicode objects
    are UTF-16, rather than the UCS-4 used in Linux distributions.
    (fd.o #57140, Simon McVittie)
  * Always include headers in a consistent order (Debian #749133, Simon McVittie)
  * Include config.h in all C code that we compile. This is necessary
    on platforms where it might contain something like "#define _GNU_SOURCE"
    or "#define inline __inline".
    (Simon McVittie)
- Update to version 1.2.2
  + Versioning changes:
  * dbus-python releases now have an even micro version (1.2.0, 1.2.2),
    and snapshots from git have an odd micro version (1.2.1).
  + Dependencies:
  * Building from git (but not from tarballs) now requires
    macros from the GNU Autoconf Archive, for example the autoconf-archive
    package in Debian or Fedora derivatives.
  * Building from git (but not from tarballs) now requires Automake 1.13
    or later.
  * The automated tests and some examples now require PyGI (the gi module),
    not PyGObject 2 (the deprecated glib and gobject modules).
  + Enhancements:
  * There is now a setuptools setup.py, allowing dbus-python to be installed
    into a virtualenv using pip from a standard Automake source release. This
    requires pre-existing system-wide installations of the normal build
    dependencies (pkg-config, libdbus, dbus-glib, a C compiler) and has
    some limitations. For system-wide installations and development,
    please use the Autoconf/Automake build system directly.
    (fd.o #55439; Simon McVittie)
  * dbus-python now uses the common compiler warnings from AX_COMPILER_FLAGS
    (Simon McVittie)
  * The automated tests can now be installed as GNOME-style "installed tests",
    and should be somewhat more reliable (Simon McVittie)
  + Fixes:
  * ``from dbus.service import *`` now imports FallbackObject
    (fd.o #85720; Ben Longbons)
  * The GConf-related examples work again (fd.o #85720; Ben Longbons)
  * Consistently make examples executable, and install them all
    (fd.o #85720; Ben Longbons)
  * Search PATH for an appropriately-versioned pythonX.Y-config, or as a last
    resort python-config, if there isn't a ${PYTHON}-config in the
    same directory as ${PYTHON} (fd.o #92085; Yamashita, Yuu)
  * Add support for the Automake 1.13 parallel test driver (Simon McVittie)
  * Skip building API documentation if "import epydoc" fails (Simon McVittie)
- Add python version-dependent and python version-indepent devel
  packages.

- Add missing dependency on python-gobject (bnc#850792)

- Removed the %{RELEASE} from the dbus-1 Requires: entries (fixes also Factory
  auto check).

- Update to version 1.2.0:
  Dependencies:
  - libdbus 1.6 or later is now required.
  Enhancements:
  - Unicode Corrigendum 9: when used with a suitable version of libdbus
    (1.6.10 or later, or 1.7.2 or later), noncharacters in strings are
    now accepted
  Fixes:
  - Support DBusException('something with non?ASCII') under Python 2
    (Michael Vogt, smcv; fd.o #55899)
  - Correct some misleading wording in COPYING which was written under the
    assumption that libdbus could actually be relicensed to MIT/X11
    (Thiago Macieira)
  - Avoid variable-length arrays, because MSVC++ is still stuck in 1998
    (based on patches from Christoph Höger, fd.o #51725)
  - Remove unnecessary uses of stdint.h (fd.o #51725)
  - Add support for Unix compilers not supporting 'inline', for completeness
  - Use GObject.__class__ instead of GObjectMeta, which can no longer be
    imported from gi.repository.GObject in pygobject 3.8
  - Fix autoreconfiscation on Automake 1.13 (Marko Lindqvist, fd.o #59006)
- Removed libxml2-python runtime requirement (not needed).

- Update to version 1.1.1:
  Dependencies:
  - libdbus 1.6 or later is now recommended. It is not strictly required yet.
  Fixes:
  - Validate UTF-8 according to the rules libdbus uses, falling back to our
    own (inefficient) implementation if not compiled against dbus >= 1.6
    (fdo#40817)
  - Under Python 3, in the absence of introspection or signature='...',
    pass dbus.ObjectPath or dbus.Signature arguments with the obvious
    signature 'o' or 'g', not 's'. This previously only worked in Python 2.
    (fdo#50740)
  From version 1.1.0:
  Deprecations:
  - dbus.gobject_service is deprecated. Use dbus.gi_service and PyGI in new
    code.
  API changes:
  - dbus.gobject_service works in legacy PyGObject 2 applications again,
    like it did before 1.0. The down side is that it doesn't work in all PyGI
    applications any more, unlike 1.0. In PyGI applications, depend on
    dbus-python >= 1.1 and use dbus.gi_service instead - its API is the same.
    (fdo#48904, deb#670516)
  - dbus.gobject_service has been removed from Python 3 builds altogether.
  Enhancements:
  - Use DBusBasicValue from libdbus 1.5, if available, rather than reinventing
    it
  Fixes:
  - Put sockets for the regression tests in /tmp, not the builddir, fixing
    test failures in a really long builddir (fdo#46747)
  - Fix a reference leak in dbus_py_variant_level_set (fdo#47108)
  - Modify AM_CHECK_PYTHON_HEADERS so the "another way" works with Python 3

- dbus-1-python3 package added

- New upstream version 1.0.0:
  Dependencies:
  - libdbus 1.4 or later is now required.
  - Python 2.6 or later is now required. If Python 3 is used, it must be
    version 3.2 or later.
  - GNU make (or, at your own risk, another make with the GNU $(patsubst)
    extension) is now required.
  API changes:
  - dbus_bindings, which was never meant to be public API and has been
    deprecated for nearly 5 years, has finally been removed.
  - The repr() of every dbus-python object is now unicode.
  - The Python 3 API is not the same as the Python 2 API; see PY3PORT.rst for
    details.
  Enhancements:
  - Python 3 compatibility (fd.o #26420)
  - MethodCallMessage and SignalMessage now have a more useful repr()
  Fixes:
  - OOM while appending a unicode object to a message no longer leaks a string
  - If libdbus somehow gives us invalid UTF-8, don't crash
  - Fix rst2html failure in non-UTF-8 locales
  From version 0.84.0:
  Enhancements:
  - fd.o #30812: add the UnixFd type, and support Unix fd passing if compiled
    against a new enough libdbus
  - fd.o #34342: add Connection.set_allow_anonymous(bool)
  - fd.o #21017: add configure arguments PYTHON_INCLUDES and PYTHON_LIBS which
    can be used to override $PYTHON-config
  Fixes:
  - fd.o #35626: clear ProxyObject's pending introspection queue after
    execution
  - fd.o #22560: remove duplicate code from example-async-client
  - fd.o #36206: allow signature='x' among ProxyObject method arguments
- Spec file updates:
  - Removed pyrex from BuildRequires: (not needed anymore).
  - Removed "autoreconf -fi" from %build section and also libtool requirement
    (not needed).
  - Added epydoc and python-docutils in BuildRequires: to enable generation of
    HTML docs and API documentation.

- Update to latest version from tumbleweed jira#OPENSUSE-22
  boo#1183818
- Enable testsuite

- update to 1.2.16:
  * All tests are run even if the tap.py module is not available, although
    diagnostics for failing tests will be better if it is present.
  * Forbid unexpanded AX-prefixed macros more selectively

- Support builds with more than one python3 flavor
  gh#openSUSE/python-rpm-macros#66
- Remove shebang from examples (rpmlint warning, is in common doc)
- Clean duplicate python flavor variables for configure
- Update the provides/obsoletes tags for old-style dbus-1-$python

- Version update to version 1.2.14:
  * Ensure that the numeric types from dbus.types get the same
    str() under Python 3.8 that they did under previous versions.
  * Disable -Winline.
  * Add Python 3.8 to CI.
  - Changes in version 1.2.12:
  * Don't save and restore the exception indicator when called
    from C code.
  - Changes in version 1.2.10:
  * Rewrite CONTRIBUTING.md document, based on Wayland's equivalent
  * Add clearer license information using SPDX-License-Identifier.
  * Improve test coverage.
  * Don't set deprecated tp_print to NULL under Python 3.
  * Include inherited methods and properties when documenting
    objects, which regressed when migrating from epydoc to sphinx.
  * Add missing variant_level member to UnixFd type, for parity
    with the other dbus.types types (dbus-python!3.
  - Note that this is a potentially incompatible change: unknown
    keyword arguments were previously ignored (!) and are now an
    error.
  * Don't reply to method calls if they have the NO_REPLY_EXPECTED
    flag (fd.o#32529, dbus-python#26.
  * Silence -Wcast-function-type with gcc 8.
  * Fix distcheck with python3.7 by deleting __pycache__ during
    uninstall.
  * Consistently save and restore the exception indicator when
    called from C code.
  * Avoid a long-standing race condition in the automated tests.
  * Fix Qt website URL.
- Up dbus dependency; 1.8 is now required.

- Add missing dependency for pkg-config files

- Version update to version 1.2.8:
  * Python 2.7 required or 3.4 respectively
  * Tests use tap.py functionality
  * Upstream dropped epydoc completely
  * See NEWS for more

- Use requires_ge instead of the rpm calls