* Thu Dec 20 2018 mardnh@gmx.de
- Don't enable support for nDPI by default
* Mon Dec 17 2018 Jan Engelhardt <jengelh@inai.de>
- Trim filler wording from description.
* Mon Nov 26 2018 mardnh@gmx.de
- Drop support for older distributions
- Update to version 1.7.2
+ nfacctd, sfacctd: added Kafka broker among the options to receive
NetFlow/IPFIX, sFlow data from. Host, port and topic should all be
specified along with an optional config file to pass to librdkafka.
+ nfacctd, sfacctd, pmtelemetryd: added ZeroMQ queue among the options
to receive NetFlow/IPFIX, sFlow or Streaming Telemetry data from. An
IP address and port should be specified.
+ nfacctd, sfacctd: added sampling_direction to the set of supported
primitives, valid values being ingress, egress and unknown.
+ nfacctd, sfacctd: stats, ie. amount of NetFlow/IPFIX or sFlow packets
received per router, are now available when in tee mode. Stats can be
retrieved via a SIGUSR1 UNIX signal.
+ pcap_savefile_replay: a feature to replay content for the specified
amounf of time when reading from a pcap_savefile.
+ pre_tag_map: added several new keys: src_net and dst_net (to tag on
source and destination IP prefixes respectively), bgp_nexthop (to
tag on BGP nexthop) and nat_event.
+ BGP daemon: added bgp_lrgcomm_pattern feature to filter large BGP
communities (in addition to existing equivalent knobs to filter on
standard and extended communities).
+ BMP, Streaming Telemetry daemons: msglog_file and dump_file config
directives now offer $bmp_router, $bmp_router_port, $telemetry_node
and $telemetry_node_port variables.
+ BGP, BMP, Streaming Telemetry daemons: added BGP, BMP and Streaming
Telemetry exporter TCP/UDP port as variable for dump/log filenames
(to better support NAT traversal scenarios).
+ BGP, BMP daemons: added message sequencing to both BGP and BMP dumps
(bgp_table_dump_*, bmp_dump_*). If dumping and logging are enabled
in parallel then sequencing the dumps allows for check pointing at
regular time intervals.
+ BMP daemon: implemented draft-hsmit-bmp-extensible-routemon-msgs for
a tlv-based encoding of route-monitoring messages with a new message
type.
+ Streaming Telemetry daemon: added sample decoders for gRPC / GPB for
Cisco and Huawei platforms, written in Python. Telemetry data is
decoded using vendor-supplied proto files and output in JSON format
in a ZeroMQ queue - suitable for ingestion in pmtelemetryd. Docs and
sample code is available in the telemetry/ directory. This is all in
addition to TCP/UDP transports and JSON encoding supported natively
in pmtelemetryd.
+ kafka plugin: introduced support for Confluent Schema Registry via
libserdes. A registry can be supplied via kafka_avro_schema_registry
config directive; the schema is generated automatically. The feature
enables validation of data passed through a Kafka broker and uses
Avro encoding.
+ kafka plugin: added $in_iface key (input interface) to the set of
variables supported by kafka_partition_key. Extremely useful when
coupled to $peer_src_ip in some scenarios.
+ print, IMT plugins: separator for CSV format can now be space (\s)
or tab (\t).
+ tee plugin: added Kafka broker among the emitters. kafka_broker and
kafka_topic knobs are now available in the tee_receivers map and a
tee_kafka_config_file directive allows to define a file with config
to pass to librdkafka.
+ tee plugin: added ZeroMQ queue among the emitters. zmq_address knob
defines the queue IP address and port to emit to.
+ tee plugin: introducing support for complex pre_tag_map when doing
replication of NetFlow/IPFIX (sFlow replication had already this).
With this feature flows are individually evaluated against supplied
filters (input interface, BGP next-hop, etc.) and (not) replicated
accordingly.
+ GeoIP v2: added support for latitude and longitude primitives via
src_host_coords and dst_host_coords knobs. This is in addition to
existing country and pocode supports.
+ files_uid, files_gid: now also user and group strings are accepted.
This is in addition to user and group IDs.
! fix, nfacctd: NF_evaluate_flow_type() improved to not detect Cisco
ASA flows (ie. those including initiator and responder octets) as
events. Also improved sanity checking of received NetFlow v9/IPFIX
data and options templates and reviwed modulo functions and improved
template hashing.
! fix, BGP, BMP, Streaming Telemetry daemons: improved log sequencing
by handling counter wrap-up more gracefully. Also a log sequencing
API was developed to improve code re-use.
! fix, BGP daemon: added check for duplicate Router-IDs at BGP OPEN
parsing time. If a duplicate is detected, the session BGP OPENing of
the new session is dropped.
! fix, BGP daemon: ADD-PATH capability was checked only in the first
AFI/SAFI and was being set in the reply for last AFI/SAFI RECEIVE(1)
if first included SEND(2) or SEND-RECEIVE(3). Thanks to Markus Weber
( @FvDxxx ) for his patch.
! fix, BGP daemon: upon route lookup, don't perform ADD-PATH logics if
no PATH-ID (even if ADD-PATH capability is announced by the peer).
Thanks to Camilo Cardona ( @jccardonar ) for his support solving the
issue.
! fix, BGP daemon: graceful handling of invalid AS-PATH segment types
(ie. AS-PATH in BGP UPDATE inconsistent with capabilities passed in
BGP OPEN) in order to avoid SEGVs.
! fix, pmtelemetryd: improved support for UDP timeouts. Also reviewed
natively supported encodings: removed zjson and GPB was moved to pre-
processors (with samples available in telemetry/decoders directory).
! fix, pmtelemetryd: no dump_init / dump_close events sequencing since
all messages are sequenced anyway (consistency with other daemons).
! fix, kafka_common.c: now destroying both config and topic config as
part of p_kafka_close() in order to avoid memory leaks. Also, port is
omitted from broker string if not passed to p_kafka_set_broker(). And
finally output queue length checks in p_kafka_check_outq_len() have
been relaxed (to counter temporary hickups that need more patience).
! fix, kafka plugin: kafka_partition default was zero (that is, a valid
partition number) instead of -1 (RD_KAFKA_PARTITION_UA or unassigned)
which allows librdkafka to attach a partitioner.
! fix, SQL plugins: sql_table_schema is honoured even if sql_table_name
is non-dynamic. This is to cover cases where the table is rotated
externally.
! fix, mysql plugin: my_bool replaced with bool. The plugin now does
compile against MySQL 8.0. Also added inclusion of stdbool.h as on
some systems bool is not defined. Improved overall probing for MySQL
headers.
! fix, pgsql plugin: sql_recovery_backup_host was not being honoured.
PG_create_backend() now composes a proper conn_string.
! fix, print plugin: increase successful queries number, QN, only if
the output file was successfully opened.
! fix, zmq_common.c: moved ZAP socket initialization inside the ZAP
handler. See: https://github.com/zeromq/libzmq/issues/3313 .
! fix, util.c: length checks in handle_dynname_internal_strings() were
reviewed. Existings were not working in absence of starting/trailing
non-variable strings.
! fix, util.c: use lockf() instead of more problematic flock(). Thanks
to Yuri Lachin ( @yuyutime ) and Miki Takata ( @mikiT ) for their
support.
! fix, util.c: in compose_timestamp() pad usecs and use "%ld" since
time fields are signed longs. Thanks to @raymondrussell for the
patch.
! fix, ndpi_util.c: a protocol bitmask is now set in order to increase
match rate. Patch is courtesy by @rsolsn.
! fix, compile time warnings: several warnings were addressed including
but not restricted to -Wreturn-time, -Wunused-variable, implicit func
declarations, -Wformat-extra-args, -Wunused-label, -Wunused-value,
- Wunused-function, sbrk calls, -Wpointer-to-int-cast, -Wparentheses
and -Wint-to-pointer-cast.
! fix, dangerous uninitialized values: net_aggr.c, pmacct.c: in merge()
argument with non-NULL attribute could be passed NULL; bmp_msg.c: in
bmp_process_msg_route_monitor() bdata.tstamp could be uninitialized;
sfprobe_plugin.c: calloc() return value (possibly null) was not being
checked; sflow_agent.c: uninitialized ret value in sfl_agent_init()
could lead to undefined bind() error behaviour.
! fix, thread_pool.c: reviewed logics in deallocate_thread_pool() and
solved a minor memory leak in allocate_thread_pool().
- pmacctd: removed support for FDDI
- nfacctd: discontinued support for NetFlow v1, v7 and v8 collection
and replication.
- pre_tag_map: matching on 'sampling_rate' is not supported anymore as
a sampling_rate primitive is now available; the 'return' feature to
return matched data before completing the map workflow has started
being obsoleted (retired from docs but still available).
- plugin_pipe_check_core_pid: deprecating feature given RabbitMQ and
Kafka are not supported anymore for internal message delivery.
- tee plugin: obsoleted tee_dissect_send_full_pkt knob, entire packets
are now replicated only if no pre_tag_map or a simple pre_tag_map is
defined.
- nfprobe plugin: removed support for NetFlow v1 export.
* Sun May 06 2018 mardnh@gmx.de
- update to version 1.7.1
+ pmbgpd: introduced a BGP connect feature meant to map BGP peers
(ie. PE routers) to BGP collectors (ie. nfacctd, sfacctd) via a
standalone BGP daemon (pmbgpd). The aim is to facilitate operations
when re-sizing/re-balancing the collection infrastructure without
impacting (ie. re-configuring) BGP peers. bgp_daemon_xconnect_map
expects full pathname to a file where cross-connects are defined;
mapping works only against the IP source address and not the BGP
Router ID, only 1:1 relationships can be formed (ie. this is about
cross-connecting, not replication) and only one session per BGP
peer is supported (ie. multiple BGP agents are running on the same
IP address or NAT traversal scenarios are not supported [yet]).
A sample map is provided in 'examples/bgp_xconnects.map.example'.
+ pmbgpd: introduced a BGP Looking Glass server allowing to perform
queries, ie. lookup of IP addresses/prefixes or get the list of BGP
peers, against available BGP RIBs. The server is asyncronous and
uses ZeroMQ as transport layer to serve incoming queries. Sample
C/Python LG clients are available in 'examples/lg'. A sample LG
server config is available in QUICKSTART. Request/Reply Looking
Glass formats are documented in 'docs/LOOKING_GLASS_FORMAT'.
+ pmacctd: a single daemon can now listen for traffic on multiple
interfaces via a polling mechanism. This can be configured via a
pcap_interfaces_map feature (interface/pcap_interface can still be
used for backward compatiblity to listen on a single interface). The
map allows to define also ifindex mapping and capturing direction on
a per-interface basis. The map can be reloaded at runtime via a USR2
signal and a sample map is in examples/pcap_interfaces.map.example.
+ Kafka plugin: dynamic partitioning via kafka_partition_dynamic and
kafka_partition_key knobs is introduced. The Kafka topic can contain
variables, ie. $peer_src_ip, $src_host, $dst_port, $tag, etc., which
are all computed when data is purged to the backend. This feature is
in addition to the existing kafka_partition feature which allows to
rely on the built-in Kafka partitioning to assign data statically to
one partition or rely dynamically on the default partitioner. The
feature is courtesy by Corentin Neau / Codethink ( @weyfonk ).
+ Introduced rfc3339 formatted timestamps: in logs, ie. UTC timezone
represented as yyyy-MM-ddTHH:mm:ss(.ss)Z; for aggregation primitives
the timestamps_rfc3339 knob can be used to enable this feature (left
disabled by default for backward compatibility).
+ timestamps_utc: new knob to decode timestamps to UTC timezone even
if the Operating System is set to a different timezone. On the goods
of running a system set to UTC please read Q18 of FAQS.
+ sfacctd: implemented mpls_label_top, mpls_label_bottom and
mpls_stack_depth primitives decoded from sFlow flow sample headers.
Thanks to David Barroso ( @dbarrosop ) for his support.
+ nfacctd: added support for IEs 130 (exporterIPv4Address) and 131
(exporterIPv6Address) when passed as part of NetFlow v9/IPFIX
option packets (these IEs were already supported when passed in flow
data). Also added support for IE 351 (dataLinkFrameSection) which
carries the initial portion of a sampled raw packet headers (a-la
sFlow). This was tested working against a Cisco NCS 5k platform.
+ nfprobe plugin: added a new nfprobe_dont_cache knob allowing to
disable caching and summarisation of flows (essentially letting the
NetFlow/IPFIX probe behave like a sFlow probe).
+ nfprobe plugin: added support for MPLS_LABEL_1, NetFlow v9/IPFIX IE
70; improved support for BGP next-hop IE 18 and 63. Also support for
IE 130/131 vi NetFlow v9/IPFIX Options was added.
+ sfprobe plugin: added sfprobe_source_ip knob to define the local IP
address from which sFlow datagrams are exported; improved support
for BGP next-hop.
+ nfacctd, sfacctd, BGP, BMP, Streaming Telemetry daemons: on Linux,
if supported, use SO_REUSEPORT for the listening socket (added to
existing SO_REUSEADDR option).
+ nfacctd, sfacctd: introduced new 'export_proto_sysid' primitive to
give visibility to NetFlow v5/v8 engine_id / NetFlow v9 source ID /
IPFIX Obs Domain ID / sFlow agentSubID.
+ nfacctd, sfacctd: extended nDPI support to NetFlow v9/IPFIX packets
with IE 315 (dataLinkFrameSection) and sFlow v5 packets with header
section.
+ nfacctd, sfacctd: extended custom primitives definition framework,
aggregate_primitives, to NetFlow v9/IPFIX packets with IE 315
(dataLinkFrameSection) and sFlow v5 sampled headers section.
+ nfacctd, sfacctd: added per-collector packets and bytes counts to
stats emitted via SIGUSR1. Also the output was made more formal (so
to be more easily parsed) and is documented in the UPGRADE notes.
+ nfacctd, pmacctd, sfacctd: pcap_savefile_delay feature introduced
to sleep for the supplied amount of seconds before playing a given
pcap_savefile. Useful, for example, to let BGP/BMP sessions come up
so that routing data is available for correlation when processing
data in the trace.
+ Kafka plugin: configuring statistics.interval.ms to a positive value
in a kafka_config_file makes now librdkafka log plenty of internal
metrics.
+ BGP daemon: added support for Extended BGP Administrative Shutdown
Communication (draft-snijders-idr-rfc8203bis-00).
+ BMP daemon: added support for draft-ietf-grow-bmp-adj-rib-out-01 and
draft-ietf-grow-bmp-loc-rib-01. As a result of that, Route Monitor
log messages now contain indication of is_out and is_filtered.
+ BMP daemon: added support for stats reports 9, 10, 11, 12 and 13 and
descriptions for the different Peer Types and and Peer Down reasons.
Finally, indication of is_post is now making to Route Monitor log
messages.
+ plugin_pipe_zmq: introduced plugin_pipe_zmq_hwm (high water mark)
knob to control the maximum amount of messages than can be stored in
the ZeroMQ queue.
+ [ns]facctd_allow_file: the map is now made reloadable at runtime via
SIGUSR2 and accepts IPv4/IPv6 prefixes increasing its scale (before
it was only accepting individual IP addresses).
+ pmacctd: added support for IPv6, MPLS for DLT_LINUX_SLL captures.
Thanks to David Barroso ( @dbarrosop ) for his support.
+ uacctd: added a global 'direction' knob to give visibility of data
capturing direction, ie. in/out. Useful for pre_tag_map use.
+ MySQL plugin: added sql_port knob in order to specify non-default
ports for connecting to the database. Patch is courtesy by Vadim
Tkachenko ( @vadimtk ).
! fix, plugins: getppid() parent process health check improved so
to work in Docker environments not assuming anymore parent PID is
1. Patch is courtesy by Hidde van der Heide ( @hvanderheide ).
! fix, plugins: imposing a budget for received messages (100) so to
preserve fairness of other operations (ie. time keeping, bucketing,
reloading maps, etc.) and prevent starvations.
! fix, zmq_common.c: retry if zmq_getsockopt() for ZMQ_EVENTS returns
EINTR. Thanks to Wouter de Jong for his support solving the issue.
! fix, plugins: when executing triggers, the first argument passed to
execv() should be the path to the invoked executable to prevent
execv(3) to fail and return EFAULT on OpenBSD. Patch is courtesy
by @higgsd.
! fix, BGP daemon: improved support of multiple capabilities per
optional parameter in the OPEN message. Also add-path capability is
now advertised if neighbor supports send/receive (previously it was
sent back on send only) of such capability. Thanks to Radu Anghel
( @cozonac ) for his support.
! fix, BGP daemon: upon route lookup, don't perform ADD-PATH logics if
no PATH-ID (even if ADD-PATH capability is announced by the peer).
Thanks to Camilo Cardona ( @jccardonar ) for his support solving the
issue.
! fix, BGP daemon: wrong type 2 32-bit ASN Route Distinguisher was
defined in network.h. Thanks to Thomas Graf for reporting the issue.
! fix, BGP, BMP daemons: lookup of BGP-LU entries is now performed
against the correct RIB.
! fix, BMP daemon: the BMP thread is now made mutually exclusive with
the BGP one (until an use-case needs to run them both). This is to
potentially prevent BGP and BMP information to interfere with each
other when correlated. Also the 'bmp' keyword was added for *_as and
* _net config directives (ie. nfacctd_as, nfacctd_net). Thanks to
Juan Camilo Cardona ( @jccardonar ) for his support.
! fix, BMP daemon: improved correlation of BMP data with traffic data
by supporting a replication use-case (the BMP exporter is a route
- server rather than an actual Edge Router) upon lookup. Thanks to
Juan Camilo Cardona ( @jccardonar ) for his support.
! fix, BMP daemon: in bgp_peer_cmp() and bgp_peer_host_addr_cmp() the
comparison function has been changed from generic memcmp() to a more
specific host_addr_cmp() as paddings were giving issues. Thanks to
Juan Camilo Cardona ( @jccardonar ) for reporting the issue.
! fix, BMP daemon: a pm_tdestroy call in bmp_peer_close() was leading
to SEGV under certain conditions by not NULL'ing all pointers. Thanks
to Juan Camilo Cardona ( @jccardonar ) for reporting the issue.
! fix, nfacctd: prevent time calculations to underflow in cases in
which sysUptime < first or last flow switched timestamps in NetFlow
v5. Patch is courtesy by David Steinn Geirsson ( @dsgwork ).
! fix, nfacctd: in the context of aggregate_primitives, now enforcing
terminating the zero when decoding variable-length IEs when applying
string semantics.
! fix, nfprobe: changed ifIndex fields from u_int16_t to u_int32_t in
order to prevent overflows and aligning to the rest of structs.
! fix, MySQL plugin: minor code revisions to restore compiling against
MariaDB 10.2.
! fix, sql_common.c: increased read_SQLquery_from_file() buffer size
so that sql_table_schema can be fed with longer CREATE TABLE
statements.
! fix, print, SQL plugins: post_tag, post_tag2 support was added to
sql_table and print_output_file. Also for Kafka, RabbitMQ plugins
kafka_topic and amqp_routing_key variables support was harmonized
with print and SQL plugins (ie. $pre_tag renamed to $tag), see
UPGRADE notes.
! fix, SQL plugins: sql_startup_delay was not being honored when
sql_trigger_exec was defined without a sql_trigger_time resulting
in empty environment variables being passed to the triggered script.
Thanks to Johannes Maybaum for his support resolving the issue.
! fix, pkt_handlers.c: tmp_asa_bi_flow value was ignored when applied
to a specific plugin.
! fix, util.c: when data timestamp is not available, dynamic file and
table names variables were populated with a 1-Jan-1970 date. Now the
current timestamp is used instead as last resort. Patch is courtesy
by Ivan F. Martinez ( @ivanfmartinez ).
! fix, addr.c: host_addr_mask_sa_cmp() and str_to_addr_mask() network
mask computation for IPv6 addresses was wrong. allow_file feature
was affected.
! fix, build system: several patches committed to the build system to
simplify libraries probing, make sure to bail out upon error. Also
now a minimum required version is imposed to almost all libraries.
- --enable-threads / --disable-threads: removed the configure switch
that was allowing to compile pmacct even when no pthreads library was
available on a system. From now on support for threads is mandatory.
- BGP daemon: offline code, ie. bgp_daemon_offline_* config directives,
has been deprecated in favor of other approaches, ie. BGP Looking
Glass and BGP Xconnects.
- pkt_len_distrib: the primitive, which was meant to bucket packet /
flow / sample lengths in a distribution has been obsoleted.
- Remove patch:
* pmacct-pgsql-fix-header-detection-without-autoreconf.diff
* Sun Oct 22 2017 mardnh@gmx.de
- update to version 1.7.0
+ ZeroMQ integration: by defining plugin_pipe_zmq to 'true', ZeroMQ is
used for queueing between the Core Process and plugins. This is in
alternative to the home-grown circular queue implementation (ie.
plugin_pipe_size). plugin_pipe_zmq_profile can be set to one value
of { micro, small, medium, large, xlarge } and allows to select
among a few standard buffering profiles without having to fiddle
with plugin_buffer_size. How to compile, install and operate ZeroMQ
is documented in the "Internal buffering and queueing" section of
the QUICKSTART document.
+ nDPI integration: enables packet classification, replacing existing
L7-layer project integration, and is available for pmacctd and
uacctd. The feature, once nDPI is compiled in, is simply enabled by
specifying 'class' as part of the aggregation method. How to compile
install and operate nDPI is documented in the "Quickstart guide to
packet classification" section of the QUICKSTART document.
+ nfacctd: introduced nfacctd_templates_file so that NetFlow v9/IPFIX
templates can be cached to disk to limit the amount of lost packets
due to unknown templates when nfacctd (re)starts. The implementation
is courtesy by Codethink Ltd.
+ nfacctd: introduced support for PEN on IPFIX option templates. This
is in addition to already supported PEN for data templates. Thanks
to Gilad Zamoshinski ( @zamog ) for his support.
+ sfacctd: introduced new aggregation primitives (tunnel_src_host,
tunnel_dst_host, tunnel_proto, tunnel_tos) to support inner L3
layers. Thanks to Kaname Nishizuka ( @__kaname__ ) for his support.
+ nfacctd, sfacctd: pcap_savefile and pcap_savefile_wait were ported
from pmacctd. They allow to process NetFlow/IPFIX and sFlow data
from previously captured packets; these also ease some debugging by
not having to resort anymore to tcpreplay for most cases.
+ pmacctd, sfacctd: nfacctd_time_new feature has been ported so, when
historical accounting is enabled, to allow to choose among capture
time and time of receipt at the collector for time-binning.
+ nfacctd: added support for NetFlow v9/IPFIX field types #130/#131,
respectively the IPv4/IPv6 address of the element exporter.
+ nfacctd: introduced nfacctd_disable_opt_scope_check: mainly a work
around to implementations not encoding NetFlow v9/IPIFX option scope
correctly, this knob allows to disable option scope checking. Thanks
to Gilad Zamoshinski ( @zamog ) for his support.
+ pre_tag_map: added 'source_id' key for tagging on NetFlow v9/IPFIX
source_id field. Added also 'fwdstatus' for tagging on NetFlow v9/
IPFIX information element #89: this implementation is courtesy by
Emil Palm ( @mrevilme ).
+ tee plugin: tagging is now possible on NetFlow v5-v8 engine_type/
engine_id, NetFlow v9/IPFIX source_id and sFlow AgentId.
+ tee plugin: added support for 'src_port' in tee_receivers map. When
in non-transparent replication mode, use the specified UDP port to
send data to receiver(s). This is in addition to tee_source_ip,
which allows to set a configured IP address as source.
+ networks_no_mask_if_zero: a new knob so that IP prefixes with zero
mask - that is, unknown ones or those hitting a default route - are
not masked. The feature applies to *_net aggregation primitives and
makes sure individual IP addresses belonging to unknown IP prefixes
are not zeroed out.
+ networks_file: hooked up networks_file_no_lpm feature to peer and
origin ASNs and (BGP) next-hop fields.
+ pmacctd: added support for calling pcap_set_protocol() if supported
by libpcap. Patch is courtesy by Lennert Buytenhek ( @buytenh ).
+ pmbgpd, pmbmpd, pmtelemetryd: added a few CL options to ease output
of BGP, BMP and Streaming Telemetry data, for example: -o supplies
a b[gm]p_daemon_msglog_file, -O supplies a b[gm]p_dump_file and -i
supplies b[gm]p_dump_refresh_time.
+ kafka plugin: in the examples section, added a Kafka consumer script
using the performing confluent-kafka-python module.
! fix, BGP daemon: segfault with add-path enabled peers as per issue
[#128]. Patch is courtesy by Markus Weber ( @FvDxxx ).
! fix, print plugin: do not update link to latest file if cause of
purging is a safe action (ie. cache space is finished. Thanks to
Camilo Cardona ( @jccardonar ) for reporting the issue. Also, for
the same reason, do not execute triggers (ie. print_trigger_exec).
! fix, nfacctd: improved IP protocol check in NF_evaluate_flow_type()
A missing length check was causing, under certain conditions, some
flows to be marked as IPv6. Many thanks to Yann Belin for his
support resolving the issue.
! fix, print and SQL plugins: optimized the cases when the dynamic
filename/table has to be re-evaluated. This results in purge speed
gains when the dynamic part is time-related and nfacctd_time_new is
set to true.
! fix, bgp_daemon_md5_file: if the server socket is AF_INET and the
compared peer address in MD5 file is AF_INET6 (v4-mapped v6), pass
it through ipv4_mapped_to_ipv4(). Also if the server socket is
AF_INET6 and the compared peer addess in MD5 file is AF_INET, pass
it through ipv4_to_ipv4_mapped(). Thanks to Paul Mabey for reporting
the issue.
! fix, nfacctd: improved length checks in resolve_vlen_template() to
prevent SEGVs. Thanks to Josh Suhr and Levi Mason for their support.
! fix, nfacctd: flow stitching, improved flow end time checks. Thanks
to Fabio Bindi ( @FabioLiv ) for his support resolving the issue.
! fix, amqp_common.c: amqp_persistent_msg now declares the RabbitMQ
exchange as durable in addition to marking messages as persistent;
this is related to issue #148.
! fix, nfacctd: added flowset count check to existing length checks
for NetFlow v9/IPFIX datagrams. This is to avoid logs flooding in
case of padding. Thanks to Steffen Plotner for reporting the issue.
! fix, BGP daemon: when dumping BGP data at regular time intervals,
dump_close message contained wrongly formatted timestamp. Thanks to
Yuri Lachin for reporting the issue.
! fix, MySQL plugin: if --enable-ipv6 and sql_num_hosts set to true,
use INET6_ATON for both v4 and v6 addresses. Thanks to Guy Lowe
( @gunkaaa ) for reporting the issue and his support resolving it.
! fix, 'flows' primitive: it has been wired to sFlow so to count Flow
Samples received. This is to support Q21 in FAQS document.
! fix, BGP daemon: Extended Communities value was printed with %d
(signed) format string instead of %u (unsigned), causing issue on
large values.
! fix, aggregate_primitives: improved support of 'u_int' semantics for
8 bytes integers. This is in addition to already supported 1, 2 and
4 bytes integers.
! fix, pidfile: pidfile created by plugin processes was not removed.
Thanks to Yuri Lachin for reporting the issue.
! fix, print plugin: checking non-null file descriptor before setvbuf
in order to prevent SEGV. Similar checks were added to prevent nulls
be input to libavro calls when Apache Avro output is selected.
! fix, SQL plugins: MPLS aggregation primitives were not correctly
activated in case sql_optimize_clauses was set to false.
! fix, building system: reviewed minimum requirement for libraries,
removed unused m4 macros, split features in plugins (ie. MySQL) and
supports (ie. JSON).
! fix, sql_history: it now correctly honors periods expressed is 's'
seconds.
! fix, BGP daemon: rewritten bgp_peer_print() to be thread safe.
! fix, pretag.h: addressed compiler warning on 32-bit architectures,
integer constant is too large for "long" type. Thanks to Stephen
Clark ( @sclark46 ) for reporting the issue.
- MongoDB plugin: it is being discontinued since the old Mongo API is
not supported anymore and there has never been enough push from the
community to transition to the new/current API (which would require
a rewrite of most of the plugin). In this phase-1 the existing
MongoDB plugin is still available using 'plugins: mongodb_legacy'
in the configuration.
- Packet classification basing on the L7-filter project is being
discontinued (ie. 'classifiers' directive). This is being replaced
by an implementation basing on the nDPI project. As part of this
also the sql_aggressive_classification knob has been discontinued.
- tee_receiver was part of the original implementation of the tee
plugin, allowing to forward to a single target and hence requiring
multiple plugins instantiated, one per target. Since 0.14.3 this
directive was effectively outdated by tee_receivers.
- tmp_net_own_field: the knob has been discontinued and was allowing
to revert to backward compatible behaviour of IP prefixes (ie.
src_net) being written in the same field as IP addresses (ie.
src_host).
- tmp_comms_same_field: the knob has been discontinued and was
allowing to revert to backward compatible behaviour of BGP
communities (standard and extended) being writeen all in the same
field.
- plugin_pipe_amqp and plugin_pipe_kafka features were meant as an
alternative to the homegrown queue solution for internal messaging,
ie. passing data from the Core Process to Plugins, and are being
discontinued. They are being replaced by a new implementation,
plugin_pipe_zmq, basing on ZeroMQ.
- plugin_pipe_backlog was allowing to keep an artificial backlog of
data in the Core Process so to maximise bypass poll() syscalls in
plugins. If home-grown queueing is found limiting, instead of
falling back to such strategies, ZeroMQ queueing should be used.
- pmacctd: deprecated support for legacy link layers: FDDI, Token Ring
and HDLC.
* Sat Apr 22 2017 mardnh@gmx.de
- update to version 1.6.2
+ BGP, BMP daemons: introduced support for BGP Large Communities IETF
draft (draft-ietf-idr-large-community). Large Communities are stored
in a variable-length field. Thanks to Job Snijders ( @job ) for his
support.
+ BGP daemon: implemented draft-ietf-idr-shutdown. The draft defines a
mechanism to transmit a short freeform UTF-8 message as part of a
Cease NOTIFICATION message to inform the peer why the BGP session is
being shutdown or reset. Thanks to Job Snijders ( @job ) for his
support.
+ tee plugin, pre_tag_map: introduced support for inspetion of specific
flow primitives and selective replication over them. The primitives
supported are: input and output interfaces, source and destination
MAC addresses, VLAN ID. The feature is now limited to sFlow v5 only.
Thanks to Nick Hilliard and Barry O'Donovan for their support.
+ Added src_host_pocode and dst_host_pocode primitives, pocode being a
compact and (de-)aggregatable (easy to identify districts, cities,
metro areas, etc.) geographical representation, based on the Maxmind
v2 City Database. Thanks to Jerred Horsman for his support.
+ Kafka support: introduced support for user-defined (librdkafka) config
file via the new *_kafka_config_file config directives. Full pathname
to a file containing directives to configure librdkafka is expected.
All knobs whose values are string, integer, boolean are supported.
+ AMQP, Kafka plugins: introduced new directives kafka_avro_schema_topic,
amqp_avro_schema_routing_key to transmit Apache Avro schemas at regular
time intervals. The routing key/topic can overlap with the one used to
send actual data.
+ AMQP, Kafka plugins: introduced support for start/stop markers when
encoding is set to Avro (ie. 'kafka_output: avro'); also Avro schema
is now embedded in a JSON envelope when sending it via a topic/routing
key (ie. kafka_avro_schema_topic).
+ print plugin: introduced new config directive avro_schema_output_file
to save the Apache Avro schema in a separate file (it was only possible
to have it combined at the beginning of the data file).
+ BGP daemon: introduced a new bgp_daemon_as config directive to set a
LocalAS which could be different from the remote peer one. This is to
establish an eBGP session instead of a iBGP one (default).
+ flow_to_rd_map: introduced support for mpls_vpn_id. In NetFlow/IPFIX
this is compared against Field Types #234 and #235.
+ sfacctd: introduced support for sFlow v2/v4 counter samples (generic,
ethernet, vlan). This is in addition to existing support for sFlow v5
counters.
+ BGP, BMP and Streming Telemetry daemons: added writer_id field when
writing to Kafka and/or RabbitMQ. The field reports the configured
core_proc_name and the actual PID of the writer process (so, while
being able to correlate writes to the same daemon, it's also possible
to distinguish among overlapping writes).
+ amqp, kafka, print plugins: harmonized JSON output to the above: added
event_type field, writer_id field with plugin name and PID.
+ BGP, BMP daemons: added AFI, SAFI information to log and dump outputs;
also show VPN Label if SAFI is MPLS VPN.
+ pmbgpd, pmbmpd: added logics to bypass building RIBs if only logging
BGP/BMP data real-time.
+ BMP daemon: added BMP peer TCP port to log and dump outputs (for NAT
traversal scenarios). Contextually, multiple TCP sessions per IP are
now supported for the same reason.
+ SQL plugins: ported (from print, etc. plugins) the 1.6.1 re-working of
the max_writers feature.
+ uacctd: use current time when we don't have a timestamp from netlink.
We only get a timestamp when there is a timestamp in the skb. Notably,
locally generated packets don't get a timestamp. The patch is courtesy
by Vincent Bernat ( @vincentbernat ).
+ build system: added configure options for partial linking of binaries
with any selection/combination of IPv4/IPv6 accounting daemons, BGP
daemon, BMP daemon and Streaming Telemetry daemon possible. By default
all are compiled in.
+ BMP daemon: internal code changes to pass additional info from BMP
per-peer header to bgp_parse_update_msg(). Goal is to expose further
info, ie. pre- vs post- policy, when logging or dumping BMP info.
! fix, BGP daemon: introduced parsing of IPv6 MPLS VPN (vpnv6) NLRIs.
Thanks to Alberto Santos ( @m4ccbr ) for reporting the issue.
! fix, BGP daemon: upon doing routes lookup, now correctly honouring
the case of BGP-LU (SAFI_MPLS_LABEL).
! fix, BGP daemon: send BGP NOTIFICATION out in case of known failures
in bgp_parse_msg().
! fix, kafka_partition, *_kafka_partition: default value changed from 0
(partition zero) to -1 (RD_KAFKA_PARTITION_UA, partition unassigned).
Thanks to Johan van den Dorpe ( @johanek ) for his support.
! fix, pre_tag_map: removed constraint for 'ip' keyword for nfacctd and
sfacctd maps. While this is equivalent syntax to specifying rules with
'ip=0.0.0.0/0', it allows for map indexing (maps_index: true).
! fix, bgp_agent_map: improved sanity check against bgp_ip for IPv6
addresses (ie. an issue appeared for the case of '::1' where the first
64 bits are zeroed out). Thanks to Charlie Smurthwaite ( @catphish )
for reporting the issue.
! fix, maps_index: indexing now correctly works for IPv6 pre_tag_map
entries. That is, those where 'ip', the IP address of the NetFlow/
IPFIX/sFlow exporter, is an IPv6 address.
! fix, pre_tag_map: if mpls_vpn_rd matching condition is specified and
maps_index is enabled, PT_map_index_fdata_mpls_vpn_rd_handler() now
picks the right (and expected) info.
! fix, pkt_handlers.c: improved definition and condition to free() in
bgp_ext_handler() in order to prevent SEGVs. Thanks to Paul Mabey for
his support.
! fix, kafka_common.c: removed waiting time from p_kafka_set_topic().
Added docs advicing to create in advance Kafka topics.
! fix, sfacctd, sfprobe: tag and tag2 are now correctly re-defined as
64 bits long.
! fix, sfprobe plugin, sfacctd: tags and class primitives are now being
encoded/decoded using enterprise #43874, legit, instead of #8800, that
was squatted back in the times. See issue #71 on GiHub for more info.
! fix, sfacctd: lengthCheck() + skipBytes() were producing an incorrect
jump in case of unknown flow samples. Replaced by skipBytesAndCheck().
Thanks to Elisa Jasinska ( @fooelisa ) for her support.
! fix, pretag_handlers.c: in bgp_agent_map added case for 'vlan and ...'
filter values.
! fix, BGP daemon: multiple issues of partial visibility of the stored
RIBs and SEGVs when bgp_table_per_peer_buckets was not left default:
don't mess with bms->table_per_peer_buckets given the multi-threaded
scenario. Thanks to Dan Berger ( @dfberger ) for his support.
! fix, BGP, BMP daemons: bgp_process_withdraw() function init aligned to
bgp_process_update() in order to prevent SEGVs. Thanks to Yuri Lachin
for his support.
! fix, bgp_msg.c: Route Distinguisher was stored and printed incorrectly
when of type RD_TYPE_IP. Thanks to Alberto Santos ( @m4ccbr ) for
reporting the issue.
! fix, bgp_logdump.c: p_kafka_set_topic() was being wrongly applied to
an amqp_host structure (instead of a kafka_host structure). Thanks to
Corentin Neau ( @weyfonk ) for reporting the issue.
! fix, BGP daemon: improved BGP next-hop setting and comparison in cases
of MP_REACH_NLRI and MPLS VPNs. Many thanks to both Catalin Petrescu
( @cpmarvin ) and Alberto Santos ( @m4ccbr ) for their support.
! fix, pmbgpd, pmbmpd: pidfile was not written even if configured. Thanks
to Aaron Glenn ( @aaglenn ) for reporting the issue.
! fix, tee plugin: tee_max_receiver_pools is now correctly honoured and
debug message shows the replicatd protocol, ie. NetFlow/IPFIX vs sFlow.
! AMQP, Kafka plugins: separate JSON objects, newline separated, are
preferred to JSON arrays when buffering of output is enabled (ie.
kafka_multi_values) and output is set to JSON. This is due to quicker
serialisation performance shown by the Jansson library.
! build system: switched to enable IPv6 support by default (while the
- -disable-ipv6 knob can be used to reverse the behaviour). Patch is
courtesy by Elisa Jasinska ( @fooelisa ).
! build system: given visibility, ie. via -V CL option, into compile
options enabled by default (ie. IPv6, threads, 64bit counters, etc.).
! fix, nfprobe: free expired records when exporting to an unavailable
collector in order to prevent a memory leak. Patch is courtersy by
Vladimir Kunschikov ( @kunschikov ).
! fix, AMQP plugin: set content type to binary in case of Apache Avro
output.
! fix, AMQP, Kafka plugins: optimized amqp_avro_schema_routing_key and
kafka_avro_schema_topic. Avro schema is built only once at startup.
! fix, cfg.c: improved parsing of config key-values where squared brakets
appear in the value part. Thanks to Brad Hein ( @regulatre ) for
reporting the issue. Also, detection of duplicates among plugin and
core process names was improved.
! fix, misc: compiler warnings: fix up missing includes and prototypes;
the patch is courtesy by Tim LaBerge ( @tlaberge ).
! kafka_consumer.py, amqp_receiver.py: Kafka, RabbitMQ consumer example
scripts have been greatly expanded to support posting to a REST API or
to a new Kafka topic, including some stats. Also conversion of multiple
newline-separated JSON objects to a JSON array has been added. Misc
bugs were fixed.
- remove patcch: pmacct-fix-implicit-pointer-decl.diff
* Wed Jul 13 2016 mardnh@gmx.de
- add systemd scripts
- add manpage for pmacct
- remove not longer supported build options
- enable-v4-mapped
- with-pgsql-includes
- fix build for older SUSE versions (SLES11SP4, SLES12, OpenSUSE 13.1)
- add patch for psql-header detection on SLES11SP4 and openSUSE 13.1
- pmacct-pgsql-fix-header-detection-without-autoreconf.diff
* Sat Jun 11 2016 mardnh@gmx.de
- update to version 1.6.0
+ Streamed telemetry daemon: quoting Cisco IOS-XR Telemetry Configuration
Guide at the time of this writing: "Streaming telemetry [ .. ] data
can be used for analysis and troubleshooting purposes to maintain the
health of the network. This is achieved by leveraging the capabilities of
machine-to-machine communication. [ .. ]" Streamed telemetry support comes
in two flavours: 1) a telemetry thread can be started in existing daemons,
ie. sFlow, NetFlow/IPFIX, etc. for the purpose of data correlation and 2)
a new daemon pmtelemetryd for standalone consumpton of data. Streamed
telemetry data can be logged real-time and/or dumped at regular time
intervals to flat-files, RabbitMQ or Kafka brokers.
+ BMP daemon: introduced support for Route Monitoring messages. RM messages
"provide an initial dump of all routes received from a peer as well as an
ongoing mechanism that sends the incremental routes advertised and
withdrawn by a peer to the monitoring station". Like for BMP events, RM
messages can be logged real-time and/or dumped at regular time intervals
to flat-files, RabbiMQ and Kafka brokers. RM messages are also saved in a
RIB structure for IP prefix lookup.
+ uacctd: ULOG support switched to NFLOG, the newer and L3 independent Linux
packet logging framework. One of the key advantages of NFLOG is support for
IPv4 and IPv6 (whereas ULOG was restricted to IPv4 only). The code has been
contributed by Vincent Bernat ( @vincentbernat ).
+ build system: it was modernized so not to rely on specific and old versions
of automake and autoconf, as it was the case until 1.5. Among the things,
pkg-config and libtool are leveraged and an autogen.sh script is generated.
The code has been contributed by Vincent Bernat ( @vincentbernat ).
+ sfacctd: RabbitMQ and Kafka support was introduced to real-time log and/
or dump at regular time intervals of sFlow counters. This is in addition
to existing support for flat-files.
+ maps_index: several improvements were carried out in the area of indexing
of maps: optimizations to pretag_index_fill() and pretag_index_lookup() to
improve lookup speeds; optimized id_entry structure, ie. by splitting key
and non-key parts, and hashing key in order to consume less memory; added
duplicate entry detection (cause of sudden index destruction);
pretag_index_destroy() destroys hash keys for each index entry, solving a
memory leak issue. Thanks to Job Snijders ( @job ) for his support.
+ Introduced 'export_proto_seqno' aggregation primitive to report on
sequence number of the export protocol (ie. NetFlow, sFlow, IPFIX). This
feature may enable more advanced offline analysis of packet loss, out of
orders, etc. over time windows than basic online analytics provided by the
daemons.
+ log.c: logging moved from standard output (stdout) to standard error
(stderr) so to not conflict with stdout printing of statistics (print
plugin). Thanks to Jim Westfall ( @jwestfall69 ) for his support.
+ print plugin: introduced a new print_output_lock_file config directive
to lock standard output (stdout) output so to prevent multiple processes
(instances of the same print plugin or different instances of print plugin)
overlap output. Thanks to Jim Westfall ( @jwestfall69 ) for his support.
+ pkt_handlers.c: euristics in NetFlow v9/IPFIX VLAN handler were improved
for the case of flows in egress direction. Also IP protocol checks were
removed for UDP/TCP ports and TCP flags in case the export protocol is
NetFlow v9/IPFIX. Thanks to Alexander Ponamarchuk for his support.
! Code refactoring: improved re-usability of much of the BGP code (so to
make it possible to use it as a library for some BMP daemon features, ie.
Route Monitoring messages support); consolidated functions to handle log
and print plugin output files; improved log messages to always include
process name and type.
! fix, bpf_filter.c: issue compiling against libpcap 1.7.x; introduced a
check for existing bpf_filter() in libpcap in order to prevent namespace
conflicts.
! fix, tmp_net_own_field default value changed to true. This knob can be
still switched to false for this release but is going to be removed soon.
! fix, cfg.c, cfg_handlers.c, pmacct.c: some configuration directives and
pmacct CL parameters requiring string parsing, ie. -T -O -c, are now
passed through tolower().
! fix, MongoDB plugin: removed version check around mongo_create_index()
and now defaulting to latest MongoDB C legacy driver API. This is due to
some versioning issue in the driver.
! fix, timestamp_arrival: primitive was reporting incorrect results (ie.
always zero) if timestamp_start or timestamp_end were not also specified
as part of the same aggregation method. Many thanks to Vincent Morel for
reporting the issue.
! fix, thread stack: a value of 0, default, leaves the stack size to the
system default or pmacct minimum (8192000) if system default is too low.
Some systems may throw an error if the defined size is not a multiple of
the system page size.
! fix, nfacctd: improved NetFlow v9/IPFIX parsing. Added new length checks
and fixed some existing checks. Thanks to Robert Wuttke ( @Benocs ) for his
support.
! fix, pretag_handlers.c: BPAS_map_bgp_nexthop_handler() and BPAS_map_bgp_
peer_dst_as_handler() were not setting a func_type.
! fix, JSON support: Jansson 2.2 does not have json_object_update_missing()
function which was introduced in 2.3. This is not provided as part of a
jansson.c file and compiled in conditionally, if needed. Jansson 2.2 is
still shipped along by some recent OS releases. Thanks to Vincent Bernat
( @vincentbernat ) for contributing the patch.
! fix, log.c: use a format string when calling syslog(). Passing directly a
potentially uncontrolled string could crash the program if the string
contains formatting parameters. Thanks to Vincent Bernat ( @vincentbernat )
for contributing the patch.
! fix, sfacctd.c: default value for config.sfacctd_counter_max_nodes was set
after sf_cnt_link_misc_structs(). Thanks to Robin Douine for his support
resolving the issue.
! fix, sfacctd.c: timestamp was consistently being reported as null in sFlow
counters output. Thanks to Robin Douine for his support resolving the issue.
! fix, SQL plugins: $SQL_HISTORY_BASETIME environment variable was reporting a
wrong value (next basetime) in the sql_trigger_exec script. Thanks to Rain
Nõmm for reporting the issue.
! fix, pretag.c: in pretag_index_fill(), replaced memcpy() with hash_dup_key()
also a missing res_fdata initialization in pretag_index_lookup() was solved;
these issues were originating false negatives upon lookup. Thanks to Rain
Nõmm fo his suppor.
! fix, ISIS daemon: hash_* functions renamed into isis_hash_* to avoid name
space clashes with their BGP daemon counter-parts.
! fix, kafka_common.c: rd_kafka_conf_set_log_cb moved to p_kafka_init_host()
due to crashes seen in p_kafka_connect_to_produce(). Thanks to Paul Mabey
for his support resolving the issue.
! fix, bgp_lookup.c: bgp_node_match_* were not returning any match in
bgp_follow_nexthop_lookup(). Thanks to Tim Jackson ( @jackson-tim ) for his
support resolving the issue.
! fix, sql_common.c: crashes observed when nfacctd_stitching was set to true
and nfacctd_time_new was set to false. Thanks to Jaroslav Jiráse
( @jjirasek ) for his support solving the issue.
- SQL plugins: sql_recovery_logfile feature was removed from the code due
to lack of support and interest. Along with it, also pmmyplay and pmpgplay
tools have been removed.
- pre_tag_map: removed support for mpls_pw_id due to lack of interest.
* Thu Jan 14 2016 mardnh@gmx.de
- update to version 1.5.3
+ Introduced the Kafka plugin: Apache Kafka is publish-subscribe messaging
rethought as a distributed commit log. Its qualities being: fast, scalable,
durable and distributed by design. pmacct Kafka plugin is designed to
send aggregated network traffic data, in JSON format, through a Kafka
broker to 3rd party applications.
+ Introduced Kafka support to BGP and BMP daemons, in both their msglog
and dump flavors (ie. see [bgp|bmp]_daemon_msglog_kafka_broker_host and
[bgp_table|bmp]_dump_kafka_broker_host and companion config directives).
+ Introduced support for a Kafka broker to be used for queueing and data
exchange between Core Process and plugins. plugin_pipe_kafka directive,
along with all other plugin_pipe_kafka_* directives, can be set globally
or apply on a per plugin basis - similarly to what was done for RabbitMQ
(ie. plugin_pipe_amqp). Support is currently restricted only to print
plugin.
+ Added a new timestamp_arrival primitive to expose NetFlow/IPFIX records
observation time (ie. arrival at the collector), in addition to flows
start and end times (timestamp_start and timestamp_end respectively).
+ plugin_pipe_amqp: feature extended to the plugins missing it: nfprobe,
sfprobe and tee.
+ Introduced bgp_table_dump_latest_file: defines the full pathname to
pointer(s) to latest file(s). Update of the latest pointer is done
evaluating files modification time. Many thanks to Juan Camilo Cardona
( @jccardonar ) for proposing the feature.
+ Introduced pmacctd_nonroot config directive to allow to run pmacctd
from a user with non root privileges. This can be desirable on systems
supporting a tool like setcap, ie. 'setcap "cap_net_raw,cap_net_admin=ep"
/path/to/pmacctd', to assign specific system capabilities to unprivileged
users. Patch is courtesy by Laurent Oudot ( @loudot-tehtris ).
+ Introduced plugin_pipe_check_core_pid: when enabled (default), validates
the sender of data at the plugin side. Useful when plugin_pipe_amqp or
plugin_pipe_kafka are enabled and hence a broker sits between the daemon
Core Process and the Plugins.
+ A new debug_internal_msg config directive to specifically enable debug
of internal messaging between Core process and plugins.
! bgp_table_dump_refresh_time, bmp_dump_refresh_time: max allowed value
raised to 86400 from 3600.
! [n|s]facctd_as_new renamed [n|s]facctd_as; improved input checks to all
* _as (ie. nfacctd_as) and *_net (ie. nfacctd_net) config directives.
! pkt_handlers.c: NF_sampling_rate_handler(), SF_sampling_rate_handler()
now perform a renormalization check at last (instead of at first) so to
report the case of unknown (0) sampling rate.
! plugin_pipe_amqp_routing_key: default value changed to '$core_proc_name-
$plugin_name-$plugin_type'. Also, increased flexibility for customizing
the key with the use of variables (values computed at startup).
! Improved amqp_receiver.py example with CL arguments and better exception
handling. Also removed file amqp_receiver_trace.py, example is now merged
in amqp_receiver.py.
! fix, BMP daemon: greatly improved message parsing and segment reassembly;
RabbitMQ broker support found broken; several code optimizations are also
included.
! fix, plugin_pipe_amqp_routing_key: check introduced to prevent multiple
plugins to bind to the same RabbitMQ exchange, routing key combination.
Thanks to Jerred Horsman for reporting the issue.
! fix, MongoDB plugin: added a custom oid fuzz generator to prevent
concurrent inserts to fail; switched from deprecated mongo_connect() to
mongo_client(); added MONGO_CONTINUE_ON_ERROR flag to mongo_insert_batch
along with more verbose error reporting. Patches are all courtesy by
Russell Heilling ( @xchewtoyx ).
! fix, nl.c: increments made too early after introduction of MAX_GTP_TRIALS
Affected: pmacctd processing of GTP in releases 1.5.x. Patch is courtesy
by TANAKA Masayuki ( @tanakamasayuki ).
! fix, pkt_handlers.c: improved case for no SAMPLER_ID, ALU & IPFIX in
NF_sampling_rate_handler() on par with NF_counters_renormalize_handler().
! fix, SQL scripts: always use "DROP TABLE IF EXISTS" for both PostgreSQL
and SQLite. Pathes are courtesy by Vincent Bernat ( @vincentbernat ).
! fix, plugin_hooks.c: if p_amqp_publish_binary() calls were done while a
sleeper thread was launched, a memory corruption was observed.
! fix, util.c: mkdir() calls in mkdir_multilevel() now default to mode 777
instead of 700; this allows more play with files_umask (by default 077).
Thanks to Ruben Laban for reporting the issue.
! fix, BMP daemon: solved a build issue under MacOS X. Path is courtesy by
Junpei YOSHINO ( @junpei-yoshino ).
! fix, util.c: self-defined Malloc() can allocate more than 4GB of memory;
function is also now renamed pm_malloc().
! fix, PostgreSQL plugin: upon purge, call sql_query() only if status of
the entry is SQL_CACHE_COMMITTED. Thanks to Harry Foster ( @harryfoster )
for his support resolving the issue.
! fix, building system: link pfring before pcap to prevend failures when
linking. Patch is courtesy by @matthewsf .
! fix, plugin_common.c: memory leak discovered when pending queries queue
was involved (ie. cases where print_refresh_time > print_history). Thanks
to Edward Henigin for reporting the issue.
* Tue Sep 08 2015 mardnh@gmx.de
- update to version 1.5.2
- add patch: pmacct-fix-implicit-pointer-decl.diff
* Sun Jul 26 2015 mardnh@gmx.de
- do not build with ULOG on newer versions > 13.2 since it got removed
from mainstream linux kernel >= 3.17
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=7200135bc1e61f1437dc326ae2ef2f310c50b4eb
* Sat Feb 21 2015 mardnh@gmx.de
- update to version 1.5.1
+ BMP daemon: BMP, BGP Monitoring Protocol, can be used to monitor BGP
sessions. The current implementation is base on the draft-ietf-grow-bmp-07
IETF draft. The daemon currently supports BMP events and stats only, ie.
initiation, termination, peer up, peer down and stats reports messages.
Route Monitoring is future (upcoming) work but routes can be currently
sourced via the BGP daemon thread (best path only or ADD-PATH), making
the two daemons complementary. The daemon enables to write BMP messages
to files or AMQP queues, real-time (msglog) or at regular time intervals
(dump) and is a separate thread in the NetFlow (nfacctd) or sFlow (sfacctd)
collectors.
+ tmp_net_own_field directive is introduced to record both individual source
and destination IP addresses and their IP prefix (nets) as part of the same
aggregation method. While this should become default behaviour, a knob for
backward-compatibility is made available for all 1.5 until the next major
release.
+ Introduced nfacctd_stitching and equivalents (ie. sfacctd_stitching):
when set to true, given an aggregation method, two new non-key fields are
added to the aggregate upon purging data to the backend: timestamp_min is
the timestamp of the first element contributing to a certain aggregate
and timestamp_max is the timestamp of the last element. In case the export
protocol provides time references, ie. NetFlow/IPFIX, these are used; if not
the current time (hence time of arrival to the collector) is used instead.
+ Introduced amqp_routing_key_rr feature to perform round-robin load-
balancing over a set of routing keys. This is in addition to existing,
and more involved, functionality of tag-based load-balancing.
+ Introduced amqp_multi_values feature: this is same feature in concept as
sql_multi_values (see docs). The value is the amount of elements to pack
in each JSON array.
+ Introduced amqp_vhost and companion (ie. bgp_daemon_msglog_amqp_vhost)
configuration directives to define the AMQP/RabbitMQ server virtual host.
+ BGP daemon: bgp_daemon_id now allows to define the BGP Router-ID disjoint
from the bgp_daemon_ip definition. Thanks to Bela Toros for his patch.
+ tee plugin: introduced tee_ipprec feature to color replicated packets,
both in transparent and non-transparent modes. Useful, especially when
in transparent mode and replicating to hosts in different subnets, to
verify which packets are coming from the replicator.
+ tee plugin: plugin-kernel send buffer size is now configurable via a new
config directive tee_pipe_size. Improved logging of send() failures.
+ nfacctd: introduced support for IPFIX sampling/renormalization using
element IDs: #302 (selectorId), #305 (samplingPacketInterval) and #306
(samplingPacketSpace). Many thanks to Rene Stoutjesdijk for his support.
+ nfacctd: added also support for VLAN ID for NetFlow v9/IPFIX via element
type #243 (it was already supported via elements #58 and #59). Support was
also added for 802.1p/CoS via element #244.
+ nfacctd: added native support for NetFlow v9/IPFIX IE #252 and #253 as
part of existing primitives in_iface and out_iface (additional check).
+ pre_tag_map: introduced 'cvlan primitive. In NetFlow v9 and IPFIX this is
compared against IE #245. The primitive also supports map indexing.
+ Introduced pre_tag_label_filter to filter on the 'label' primitive in a
similar way how the existing pre_tag_filter feature works against the
'tag' primitive. Null label values (ie. unlabelled data) can be matched
using the 'null' keyword. Negations are allowed by pre-pending a minus
sign to the label value.
+ IMT plugin: introduced '-i' command-line option to pmacct client tool: it
shows last time (in seconds) statistis were cleared via 'pmacct -e'.
+ print, MongoDB & AMQP plugins: sql_startup_delay feature ported to these
plugins.
! sql_num_hosts: the feature has been improved to support IPv6 addresses.
Pre-requisite is definition of INET6_ATON() function in the RDBMS, which
is the case for MySQL >= 5.6.3. In SQLite such function has to be defined
manually.
! nfacctd: improved NF_evaluate_flow_type() euristics to reckon NetFlow/
IPFIX event (NAT, Firewall, etc.) vs traffic (flows) records.
! fix, GeoIP: spit log notification (warning) in case GeoIP_open() returns
null pointer.
! fix, IMT plugin: pmacct client -M and -N queries were failing to report
results on exact matches. Affected: 1.5.0. Thanks to Xavier Vitard for
reporting the issue.
! fix, pkt_handlers.c: missing else in NF_src_host_handler() was causing
IPv6 prefix being copied instead of IPv6 address against NetFlow v9 recs
containing both info.
! fix, uacctd: informational log message now shows the correct group the
daemon is bound to. Thanks to Marco Marzetti for reporting the issue.
! fix, nfv9_template.c: missing byte conversion while decoding templates
was causing SEGV under certain conditions. Thanks to Sergio Bellini for
reporting the issue.
* Thu Nov 06 2014 mardnh@gmx.de
- temporary workaround for misc compile issues
* removed post-build-checks
* Wed Sep 17 2014 mardnh@gmx.de
- update to version 1.5.0
- specfile cleanup
* Fri Jul 30 2010 pascal.bleser@opensuse.org
- update to 0.12.3:
* a 'cos' aggregation primitive has been implemented, providing support for 802.1p priority
* TCP MD5 signatures are supported as part of the BGP daemon
* in nfprobe and sfprobe, the concept of traffic direction has been introduced, and as a result [ns]fprobe_direction and [ns]fprobe_ifindex config directives have been implemented
* Switch Extension Header support and Counter Samples for multiple interface features have been added in sfprobe
* a number of bugfixes are included
* Thu May 27 2010 nix@opensuse.org
- update to 0.12.2
* Wed Feb 17 2010 pascal.bleser@opensuse.org
- update to 0.12.0:
* the "is_symmetric" aggregation primitive has been implemented
and is aimed at easing detection of asymmetric traffic
* tagging is now possible on BGP primitives
* various fixes are also included
* Mon Jul 21 2008 peter+rpmspam@suntel.com.tr
- Update to version 0.11.5
* Fri Nov 17 2006 peter+rpmspam@suntel.com.tr
- Changed the permissions of the conf files to writable
* Tue May 16 2006 peter+rpmspam@suntel.com.tr
- Cleaned up SPEC file a some more and updated to 0.10.1