perl-AnyEvent-7.17-bp155.2.10

- updated to 7.17
  see /usr/share/doc/packages/perl-AnyEvent/Changes
  TODO: document TCP_*** constants
  TODO: add debug/trace logging to some modules
  TODO: use the eval-with-cb-call trick also to speed up JSON?
  TODO: FAQ: common pitfalls? invoke-before-return
  TODO: FAQ: scope-ids? hosts file order?
  TODO: AnyEvent::Handle with AnyEvent::IO?
  TODO: invalid. and localhost. specialcasing inside AEDNS and not AESocket (rfc6761)
  TODO: maybe implement env variable to give hosts precedence
  TODO: more formats for parse_ipv6 (single ipv6 address without port, ...p80, ...#80)
  TODO: inet_aton maybe pack C4? no, add a comment why not
  TODO: socket prepare callbacks, can they easily signal failure as well?
  TODO: Олег Г <verdrehung@gmail.com>, empty A record response causes
  AnyEvent::resolve_sockaddr to eventually call pack_sockaddr with undef -
  broken dns server, but maybe improve the response.
  7.17 Wed Sep 18 03:04:49 CEST 2019
  - work around antique openssl version in RHEL 7  by formatting
    dh parameters differently (reported by several people).
  - add t/13_weaken.t.

- updated to 7.16
  see /usr/share/doc/packages/perl-AnyEvent/Changes

- updated to 7.15
  see /usr/share/doc/packages/perl-AnyEvent/Changes
  7.15 Tue Feb 26 03:07:42 CET 2019
  - INCOMPATIBLE CHANGE: AnyEvent::Handle's tls_detect documentation gave
    separate major and minor versions, while code passed only a single
    value. This version follows the documentation and now passes separate
    major and minor values.
  - work around Net::SSLeay not having been ported to openssl 1.1, but many
    distributions compiling it against openssl 1.1, which unfortunately
    succeeds and results in a very broken module.
  - AnyEvent::DNS::dns_unpack now stores the original DNS packet
    in the __ member, to allow decoding of undecodable resouce records
    containing compressed domian names.
  - AnyEvent::Socket::parse_ipv6 would NOT, as advertised, accept ipv4
    addresses. It now does and converts them to ipv4 mapped addresses.
  - support CAA records, based on patch by Steve Atkins.
  - add freenom and cloudflare nameservers as dns fallback.
  - AnyEvent::Strict would not properly ward against io watchers
    on files when the handle passed was a file descriptor.
  - document "internal" variables used by the dns en-/decoder to allow
    enterprising users to extend them in a semi-official way.

- updated to 7.14
  see /usr/share/doc/packages/perl-AnyEvent/Changes

- updated to 7.13
  see /usr/share/doc/packages/perl-AnyEvent/Changes

- updated to 7.13
  see /usr/share/doc/packages/perl-AnyEvent/Changes
  7.13 Sat Sep 17 04:31:49 CEST 2016
  - Only call tlsext_host_name for non-empty common names (reported
    by Maxime Soulé).
  - log a (single) notice message if SNI is not supported.
  - upgrade to UTS-46:9.0.0 draft and switch to non-transitional
    behaviour, beating thunderbird, ie, edge, chrome and safari to it :)
    (see also https://bugzilla.mozilla.org/show_bug.cgi?id=1218179)
  - turns out the UTS-46 IDNA testcase failures were indeed bugs in the
    testcases and the specification and not in the code - the post-9.0.0
    unicode files have all known problems fixed, so finally the AnyEvent
    IDNA implementation can pass the full IDNA testsuite - without needing
    a single fix :)
  - guarantee (and document) that condvar callbacks will be removed
    on invocation - important to avoid circular references.

- updated to 7.12
  see /usr/share/doc/packages/perl-AnyEvent/Changes

- updated to 7.11
  see /usr/share/doc/packages/perl-AnyEvent/Changes
  TODO: more formats for parse_ipv6 (single ipv6 address without port, ...p80, ...#80)
  7.11 Thu Jul 16 14:36:00 CEST 2015
  - AnyEvent::Socket::parse_ipv6 could accept malformed ipv6
    addresses (extra "::" at end and similar cases).
  - add a more explicit warning to AnyEvent::Handle that it doesn't
    work on files, people keep getting confused.
  - new function AnyEvent::Socket::tcp_bind.
  - new functions AnyEvent::fh_block and AnyEvent::fh_unblock.
  - aligned ipv6 address formatting with RFC 5952 (by not shortening
    a single :0: to ::).
  - added stability canary support.

- updated to 7.09
  see /usr/share/doc/packages/perl-AnyEvent/Changes
  TODO: hosts always read? that's not expected
  7.09 Sat May  2 16:38:53 CEST 2015
  - AnyEvent::Debug called an internal function (AnyEvent::Log::ft)
    that was renamed to AnyEvent::Log:format_time. uinder its old name
    (analyzed by Michael Stovenour).
  - update AnyEvent::DNS fallback resolver addresses:
    seems google effectively killed most other free dns resolvers,
    so remove them, but add cable and wireless (ecrc) since it was
    stable for 20 years or so, official or not, and there should be
    an alternative to google.
  - perl5porters broke windows error codes in 5.20, and mapped
    WSAEWOULDBLOCK on the (different) EWOULDBLOCK error code, and
    WSAEINPROGRESS into the incompatible ERINPROGRESS code, probably
    because they were so cool. They probably broke other error codes
    for no reason, too, but I didn't care for checking, it's too
    depressing. This version only works around the WSAEWOULDBLOCK
    issue, because I don't have a nice way to work around the
    WSAEINPROGRESS bug.

- updated to 7.08
  see /usr/share/doc/packages/perl-AnyEvent/Changes
  7.08 Wed Dec 10 05:27:17 CET 2014
  - work around a newly introduced bug in Socket 2.011 (an
    errornous sun_length check) (analyzed by Maxime Soulé).
  - AnyEvent::TLS didn't load (but refer to) AnyEvent::Socket
    (analyzed by Ben Magistro).
  - AnyEvent::Strict will now confess, not croak. This is in line with
    it being a development/debugging tool.
  - work around a number of libglib bugs (debug builds of libglib enforce
    certain undocumented behaviour patterns such as not being able to
    remove a child watch source after it has fired, which we will try
    to emulate to avoid "criticals". what where they thinking...).
  - mention json security issues in AnyEvent::Handle, now that Douglas
    Crockford has foolishly and incompatibly changed JSON.
  - changed default dns resolver "max_outstanding" value from 1 to 10,
    the latter beinfg the intended value all along
    (reported by Ilya Chesnokov).
  - added new "AnyEvent::Impl::UV" interface module to the UV event lib
    (written by Mike Lowell).

- updated to 7.07
  - the documentation for custom tls verify schemes was wrong. make it agree
    with the code (reported by Maxime Soulé).
  - added cbor read and write types to AnyEvent::Handle (using CBOR::XS).
  - work around an API change in openssl that could cause wrong tls connection
    aborts, likely on windows only (analyzed by sten).
  - calling AnyEvent->now_update with AnyEvent::Impl::Perl caused an
    endless loop (reported by Dietrich Rebmann).
  - add tlsv1_1 and tlsv1_2 protocols to AnyEvent::TLS
    (patch by Maxime Soulé).
  - document AnyEvent::Impl::IOAsync::set_loop and
    $AnyEvent::Impl::IOAsync::LOOP. Though only documented now, this
    functionality has _always_ been available.
  - force a toplevel domain name in t/81_hosts.t (analyzed by
    David Jack Wange Olrik).
  - document that AnyEvent::Log uses AnyEvent::IO.
  - warn about AnyEvent::Filesys::Notify performance.
  - praise the joys of AnyEvent::Fork::*.
  - time for an =encoding directive.
  - do no longer use JSON to create a default json coder, use
    JSON::XS or JSON::PP directly.

- updated to 7.05
  - uts46data.pl couldn't be found due to wrong naming of the file
    (reported by Fulko Hew).
  - handle lone \015's properly in AE::Handle's default line read
    (reported by various people).
  - untaint ip addresses found in /etc/hosts (patch by José Micó).
  - the memleak fix in 7.03 caused resolving via /etc/hosts to always
    fail on first use (reported and testcase by Andrew Whatson).
  - expose AnyEvent::Log::format_time, and allow users to redefine it.
  - expose AnyEvent::Log::default_format, and allow redefinition.
  - expose AnyEvent::Log::fatal_exit, to allow redefinition.
  - AnyEvent::Debug shell can now run coro shell commands, if available.
  - t/63* tests were wrongly in MANIFEST.
  - kernel.org's finger server went MIA, switch to freebsd.org and
    icculus.org.
  - clarify that IO::AIO and AnyEvent::AIO are needed for AnyEvent::IO
    to function asynchronously (reported by Daniel Carosone).
  - hard-disable $^W in most tests, it generates too much garbage output.
  - use a (hopefully) more future-proof method to emulate common::sense.
  - upgrade to UTS-46:6.2.0.
  - switch to INSTLIB from INSTLIBDIR, as INSTLIBDIR was wrongly
    documented. should not affect anything.

- updated to 7.04
  - debugging code left in.
  - AnyEvent::Socket::inet_aton did not work when dns resolution was
    used to find the addresses (analyzed and patch by Maxime Soulé).
  - fix a memory leak in the /etc/hosts lookup code when hosts don't
    resolve and are not in hosts (analyzed by sten).

- updated to 7.02
  - AnyEvent::Util::run_cmd could block indefinitely (analyzed and test
    program by Yorhel).
  - verified that AnyEvent::Socket follows RFC5952.
  - try to parse "ADDR#PORT" in addition to "ADDR PORT".

- it's not noarch

- updated to 7.01
  - fail with EPROTO in AnyEvent::Handle wqhen TLS is requested but
    not available, instead of throwing an exception.
  - use File::Spec to get the tmpdir in t/*, to avoid needless
    failures on (most, not mine :) windows boxes.
  - new handle read types: tls_detect and tls_autostart.
  - child watchers are broken in POE 1.352 (also many earlier
    versions) and there seems to be no way to work around it, as POE
    itself is inherently racy. Document this regression and add a delay
    in t/68_poe_03_child.t for the time being.
  - new module AnyEvent::IO, that is a frontend to either a pure-perl
    synchronous I/O implementation (AnyEvent::IO::Perl), or to the
    asynchronous I/O extension IO::AIO (AnyEvent::IO::IOAIO).
  - load /etc/hosts only when DNS has no answer.
  - stat /etc/hosts on every access and reload it if it changed.
  - load /etc/hosts via AnyEvent::IO - potentially asynchronous.
  - fix a buggy croak in the dh parameter reading in AnyEvent::TLS.
  - AnyEvent::Log log_to_file and log_to_path now use AnyEvent::IO. As
    a side effect, they now use true appending as opposed to libc
    appending, and the file might not have been opened when the function
    returns.
  - the default logging level was not properly documented in a variety of
    places, this has hopefully been rectified.
  - updated uts46data.pl for unicode 6.1.0.
  - made log messages generated by AnyEvent submodules not
    include the package name anymore, as it will be logged
    by default already.
  - upgrade to the trick used by common-sense 3.5 to work
    around extra warning torture/breakage under perl 5.15.x.
  - log messages by anyevent are now ucfirst, are usually full
    sentences and do no longer include the package name.
  - the storable read type would sometimes throw an exception instead
    of causing EBADMSG (analyzed by Maxime Soulé).
  - work around a bug in openssl 1.0.1 which enforces a minimum rsa
    keysize (reported by Paul Howarth).
  - documented Rocco fabricating statements about AnyEvent and me.

- updated to 6.14
  - AnyEvent::Impl::Tk was broken due to a mysterious "die" inside,
    probably an editing mistake (reported by Darin McBride).
  - AnyEvent::Util::fork_call checked for POSIX availability in the wrong way,
    causing it to fail if POSIX wasn't loaded already (analysed by Rock Power).
  - AnyEvent::Handle::push_read (line => did pass $1 directly, so
    regex-matching inside the callback would change the parameter, despite
    $1 being dynamically scoped per-block. this perl bug is now being
    worked around (testcase by Cindy Wang).
  - $! was clobbered by subsequent calls in tcp_connect, due to
    the postpone not saving/restoring it (analyzed by Richard Garnish).
  - Tk cannot create windows when tainted unless you set a title, so
    set a dummy title for AnyEvent's dummy mainwindow. How dummy.
  - escape any nonprintable/nonascii characters when stringifying
    backtraces.
  - log the reason loading an interface module fails to load at level debug.

- update to 6.1
  - INCOMPATIBLE CHANGE: the default log level is now "4" (error
    and above), and some messages inside AnyEvent have been elevated
    to higher log levels to print by default.
  ... see Changes

- updated to 6.02
  - log_to_syslog now accepts facility strings.
  - log_to_syslog would not allow facilities - "$facility|$level"
  * literally* means that string. sheesh.
  - the CPAN parser got confused and thought we provide Sys::Syslog, try
    to work around.
  - renamed AnyEvent::Impl::FLTK2 to FLTK.
  ... for more see Changes

- fix deps
  o build for RHEL, CentoS, SLE_10 (Unknown tag: Recommends)
- cpanspec

- switch to bm.pl, as cpanspec created an RPM that didn't provide
  perl(AnyEvent)

- update to 5.34:
  * AE::TLS didn't support both cert_file and key at the same time, due to some
    copy&paste bug
  * improve AE::Handle timeout documentation slightly
- changes from 5.33:
  * AnyEvent::Handle on_connect_error - do not try to destroy a handle object
    when it's already gone
  * update idna algorithm(s) to UTS#46 version 6.0.0
  * preserve trailing dot in idn_to_ascii - testsuite says to preserve, uts46
    says it's an error, and testsuite makes more sense
  * remove leading dots in idn_to_ascii - testsuite says to remove, uts46 says
    it's an error, and testsuite makes more sense
  * fixed a bug in idn ignored character processing
- changes from 5.31:
  * work around a POE bug where POE would first poll for new events and invoke
    handlers BEFORE handling the message queue
  * fix parsing of "domain" statement in resolv.conf
  * stop_read now does just that in TLS mode; see its documentation for caveats
  * update to common::sense 3.4 warning set (some warnings in perl impose an
    arbitrary 32kb limit on regex matches, which affects AnyEvent::Handle)
  * AE::Handle had a broken rbuf_max method and missing wbuf_max method
  * new experimental AE::Handle::resettls method
- changes from 5.3:
  * major IOAsync patch by Paul Evans - 0.33 is required, as the major issues
    with IO::Async have been solved in that version, including the availabilty
    of a default loop!
  * implement new wbuf_max parameter for AnyEvent::Handle
  * added Cocoa::EventLoop backend
  * set CLOEXEC flag on parent-side fd's in AnyEvent::Util::run_cmd, to avoid
    leaking them to any child processes
  * try to force files into the arch-dependend lib directory, for the
    half-"turly obsessive compulsive person"(s) that depend on it
- changes from 5.29:
  * convert EV backend to EV 4.00 API (so better upgrade EV too)
  * AE::Handle: implement dynamic read_size adjustment, add max_read_size
    parameter, reduce default read_size to 2048
  * add some FAQ entries for servers and/or on_eof vs. on_error
  * reduce memory usage slightly when connect was used in AE::Handle
  * work around more segfaults in Tk
  * document tls_ctx => undef as valid
  * detect WNOHANG value at compiletime
  * include some probably linux-only support for building AnyEvent as part of
    the perl core
  * make AnyEvent::Strict truly optional (in case somebody builds a minimal perl...)
- changes from 5.28:
  * due to a glitch, AnyEvent's internal getprotobyname wasn't actually used in
    tcp_server
  * implement AnyEvent::CondVar->new method, which was documented but missing
  * support autoloading of read types in unshift_read
  * AnyEvent::Strict: do the test for invalid fh arguments differently,
    resulting in more informative error messages
  * new AnyEvent::FAQ manpage
  * clarify that you can actually call push_read etc. in on_read
  * put keys and certs in /tmp, not into the current directory and document
    this in the SECURITY CONSIDERATIONS sections of AnyEvent::TLS
  * support ";" as resolv.conf comment character in AnyEvent::DNS
  * AnyEvent::Handle now croaks when negative timeouts are passed
  * add a shitload of TCP_xxx sockopt name constants to AnyEvent::Util,
    undocumented, but who knows when they might come in handy

- switch to perl_requires macro