pcsc-acsccid-1.1.6-bp152.3.18

- Updated to version 1.1.10.
  * Add the following readers support:
    ACR40U ICC Reader
    SCR FW_Upgrade
    ACR1552 1S CL Reader
    ACR1552 CL Reader
    ACR1552 USB FW_Upgrade
  * Enable ACR1552U-M1 (composite device) as multi-slot reader.
  * Enable the 2nd interface of ACR1552U-M1 as SAM slot.
  * Fix missing initialization in get_end_points().
  * Update _usbDevice.has_interrupt in get_end_points().
  * Initialize multislot for interrupt endpoint only in OpenUSBByName().
  * Simplify the code for delaying the write operation.
  * Allow ACR38 or the reader which needs write delay in WriteUSB().
  * Check the packet size to avoid infinite loop in WriteUSB().
  * Use #pragma pack(1) for all platforms in src/ifdhandler.c.
- Replaced acsccid-1.1.9-libhal.patch with acsccid-1.1.10-libhal.patch.
- Replaced acsccid-1.1.9-polling-thread.patch with
  acsccid-1.1.10-polling-thread.patch.
- Replaced acsccid-1.1.9-polling-unplug.patch with
  acsccid-1.1.10-polling-unplug.patch.
- Replaced acsccid-1.1.9-libusb-1.0.8.patch with
  acsccid-1.1.10-libusb-1.0.8.patch.

- Updated to version 1.1.9.
  * Add the following readers support:
    APG8201-B2RO
    ACR39U-W1 Top Reader
    ACR39U-W1 Edge Reader
    WalletMate 1S CL Reader
    WalletMate USB FW_Upgrade
    ACR1581 1S Dual Reader
    ACR1581 USB FW_Upgrade
    ACR40T ICC Reader
    ACR40 FW_Upgrade
    ACR39 FW_Upgrade
  * Fix misleading read length in CCID_Receive().
  * Fix ACR1281U-C1 communication issue with NXP SAM AV3.
- Replaced acsccid-1.1.5-libhal.patch with acsccid-1.1.9-libhal.patch.
- Replaced acsccid-1.1.5-polling-thread.patch with
  acsccid-1.1.9-polling-thread.patch.
- Replaced acsccid-1.1.6-polling-unplug.patch with
  acsccid-1.1.9-polling-unplug.patch.
- Replaced acsccid-1.1.5-libusb-1.0.8.patch with
  acsccid-1.1.9-libusb-1.0.8.patch.
- Enabled paralled make.
- Replaced makeinstall macro with the expanded version.
- Removed clean section.
- Marked license files.
- Replaced RPM_BUILD_ROOT with buildroot.

- Added missing devices to Enhances:.
  * ACM1252U-Z2ACE    (VID: 072F, PID: 225B)
  * ACM1252U-Z2ACE BL (VID: 072F, PID: 225C)

- Updated to version 1.1.6.
  * Add the following readers support:
    ACR1252 CL Reader           (ACM1252U-Z2ACE)
    ACR1252 USB FW_Upgrade v100 (ACM1252U-Z2ACE BL)
  * Enable TLV properties for APG8201-B2 in IFDHControl().
  * Enable TLV properties for APG8201-B2 in process_spe_ppdu().
  * Fix ACR39U T=0 APDU problem in CmdXfrBlockTPDU_T0().
  * Return 6B 80 for supported readers in CCID_Receive().
  * Remove extra_egt() causing problems.
  * Fix undefined symbol yylex.
  * Set the status to absent if SAM reset failed in IFDHPowerICC().
  * Fix libusb config descriptor leak.
  * Fix leaking an allocated bundle in case no matching reader was found.
  * Enable ICC extended APDU for ACR1281U-C1 >= v526.
  * Add IOCTL_SMARTCARD_TOGGLE_CARD_STATE for SAM slot.
- Replaced acsccid-1.1.5-polling-unplug.patch with
  acsccid-1.1.6-polling-unplug.patch.

- Backported to SLE 11.
  * Set libusb version to 1.0.8.
  * Set pcsc-lite version to 1.4.102.
  * Added acsccid-1.1.5-libhal.patch: Fix the compatibility with libhal.
  * Added acsccid-1.1.5-polling-thread.patch: Add polling thread support for
    slot status.
  * Added acsccid-1.1.5-polling-unplug.patch: Let pcsc-lite delay the polling if
    the reader is unplugged.
  * Added acsccid-1.1.5-libusb-1.0.8.patch: Fix the compatibility with libusb
    1.0.8.

- Updated to version 1.1.5.
  * Add the following readers support:
    ACR1252IMP 1S CL Reader
    AMR220 Reader
    APG8201-B2
  * Fix ACR39U memory card problem.
  * Rename ACR3901U ICC Reader to ACR3901 ICC Reader.
  * PowerOn: use automatic voltage selection when needed.
  * PowerOn: move from 1.8V to 5V if 1.8V is not supported.
  * PowerOn: always try every possible voltage values.
  * udev rule: allow rule overwrite.

- Updated to version 1.1.4.

- Updated to version 1.1.3.

- Updated to version 1.1.2.

- Updated to version 1.1.1.

- Updated to version 1.1.0.

- Updated to version 1.0.8.

- Updated to version 1.0.7.

- Updated to version 1.0.6.

- Updated to version 1.0.5.

- Fix build with new udev rules.d directory location.

- Updated to version 1.0.4.

- Updated to version 1.0.3.
- Updated copyright.
- Added USB IDs of readers.
- Removed acsccid-1.0.2-pcscd-autostart.patch.
- Removed pcsc-lite-1_7_3.patch.
- Included ChangeLog from upstream.

- fix compatibility with pcsc-lite >= 1.7.3

- Updated to version 1.0.2 (22/6/2011):
  * Fix non-redistributable reference manual problem.
- Updated Url and Source.

- Created package.
- Based on pcsc-ccid.spec.