paraview-5.6.0-bp152.3.8

- Fixes issue that protobuf demands the use of -std=c++17.
  This was done by building ParaView with -std=c++17.

- Update to version 5.11.1:
  * Many changes, see
    <https://www.kitware.com/paraview-5-11-1-release-notes/>.

- Build with system verdict for openSUSE > 1500.

- Update to version 5.11.0:
  * Many changes, see
    <https://www.kitware.com/paraview-5-11-0-release-notes/>.
- Drop paraview-include-sstream.patch: incorporated upstream.
- New BuildRequires: sqlite3, pkgconfig(liblzma),
  pkgconfig(nlohmann_json), pkgconfig(proj), pkgconfig(sqlite3).
- Build without system nlohmann_json for Leap 15.3 and older.
- Update rpmlintrc file to suppress false positives.

- Pass CMAKE_SKIP_INSTALL_RPATH=ON for openSUSE > 1500 as well
  to enure no left-over rpaths in binaries; this fixes build
  failures in Factory.

- Trim redundancies from description.
- Add ldconfig dependency. Avoid xargs use where possible.

- Update to version 5.6.0
  https://blog.kitware.com/paraview-5-6-0-release-notes/
- add devel package
- remove Tk build requirement and adjust description since ParaView
  hasn't used Tcl/Tk for quite a few years.
- ParaViewTutorial file not updated and not available on upstream
- drop patches already applied upstream
  * paraview-pythonqt-build-fix.patch
  * fix-hdf5-gcc8.patch
  * fix-qt-5.11-931c779.patch
  * fix-no-plugin-doc-dir.patch
- modify partially applied patches
  * paraview-find-qhelpgenerator-qt5.patch

- Update to version 5.5.2
  see full changelog at
  https://blog.kitware.com/paraview-5-5-0-release-notes/
- Disable build of examples
- Don't use VTKm as it cause CMake configure problems
- drop patch paraview-default-qtstyle.patch as plastic style is
  no longer set by upstream
- drop patch Fix-ParaViewDetermineVersion.patch as a similar
  change is included upstream
- update patch paraview-fix-file-contains-date-time.patch
- add patches fix-libhdf5-missing-m.patch and
  fix-libharu-missing-m.patch to add missing libraries to
  third-party dependencies included in ParaView
- add patch fix-qt-5.11-931c779.patch to fix issue with Qt 5.11
- add patch fix-no-plugin-doc-dir.patch to remove reference to
  non-existant directory below a plug-in
- add patch fix-hdf5-gcc8.patch to fix issue with GCC 8 taken
  from upstream

- Trim goals from description, only the now counts.
  Trim marketing speech from description.

- Update to version 5.4.1:
  * The black render window observed on some systems when FXAA was
    enabled or an object's opacity was less than 1 has been fixed.
  * Field output for cells with non-straight edges has been
    corrected.
  * Derivatives for quadratic triangles are now computed
    correctly.
  * A bug that occurred when generating a Catalyst script with no
    images output has been fixed.
  * A problem with writing animations as AVIs was fixed.
  * Logic in the CGNS reader was updated to correctly read all
    solution nodes for each centering type when
    FlowSolutionPointers are missing.
  * Fixed crash in CGNS reader when moving forward in time.
  * Fixed problem with long-running animations not advancing past
    a certain number of time steps.
  * Resolved issue where changing one file path in the state file
    loader "Choose File Names" dialog also changed the file paths
    of other files with the same type.
  * Addressed problem with enumerated property dependencies in
    ParaViewWeb.
  * Added ability to change the font size in the ParaView user
    interface.
  * Fixed BoxLib3D file reader.
  * State files now properly support files with relative paths.
  * Removed inappropriate scalar bar scaling when saving large
    screen shots.
  * A bug in the color mapping that in some cases incorrectly
    mapped some data values to the above-range color was fixed.
  * OSPRay can now be compiled in Cray programming environments
    and for the first time has support for Intel Skylake
    processors.
  * Added lower limit to how small the GUI font size can be.
  * Addressed issue affecting layouts when loading a state file
    from the Python console.

- Update to version 5.4.0:
  * See https://blog.kitware.com/paraview-5-4-0-release-notes/ for
    a full list of updates.
- Use the %%cmake macro instead of using cmake manually.
- Minor rebase of existing patches for version update.
- ExcludeArch for ix86 processors until 32 bit builds can be
  sorted out; issue reported upstream.

- Update to version 5.3.0
  * VTK-m Plugin for many-core systems
  * Reader and Writer Improvements and Additions
  * Fast approximate anti-aliasing (FXAA) is now on by default
  * new StreamLinesRepresentation plugin
  * Added LagrangianParticleTracker plugin
  * Python Enhancements
  * See a summary of changes at
    https://blog.kitware.com/paraview-5-3-0-release-notes/
- drop package paraview-plugin-SciberQuestToolKit as SQTK is no longer
  part of ParaView (see commit c2bc94c2efb66c4bb525383176688ddfd430ca26)
- drop paraview-build-sciberquesttoolkit-with-opengl2.patch as SQTK is
  no longer build
- add paraview-do-not-install-missing-vtk-doxygen-dir.patch to remove
  non-existing doxygen/doc/html folder from VTK.
- modified paraview-find-qhelpgenerator-qt5.patch to adapt to partial
  inclusion of original patch to upstream

- Replicate the %cmake macro manually, stripping out the
  problematic and unused options. In particular, this restores
  passing rpm_opt_flags to C/C++ during compilation.
- Update paraview-fix-file-contains-date-time.patch to remove
  references to __DATE__ and __TIME__ also from
  Plugins/CDIReader/cdilib.c; suppresses an rpmlint warning.
- Update %{name}-rpmlintrc file to also suppress warnings about:
  * no-manual-page-for-binary: upstream doesn't supply manpages
    and we don't care.
  * hidden-file-or-dir: this hidden file is really used as a
    catalogue of available plugins by paraview.

- Update to version 5.2.0: See a summary of changes at:
  https://blog.kitware.com/paraview-5-2-0-release-notes/ .
- Use cmake macros (except for %cmake) for %build and %install
  actions; drop the paraview_cmake_options and send the options
  directly to cmake. We do not use the %cmake macro because
  it passes the RPM optflags to cmake, and with paraview 5.2 these
  flags cause compilation errors; see
  https://gitlab.kitware.com/paraview/paraview/issues/17049.
- Turn off system GL2PS and DIY for bundled VTK.
- Switch to using Qt5 for openSUSE > 13.2 and Leap 42.2 and
  higher (Qt5 >= 5.6.0 is required).
- Add BuildRequires on python-Sphinx, python-qt*-devel; new
  requirements.
- Add BuildRequires on pkgconfig(libpng), pkgconfig(freetype2) and
  pkgconfig(xt); these are all required and being implicitly
  pulled in by libqt4-devel.
- Add paraview-find-qhelpgenerator-qt5.patch: Help find
  qhelpgenerator-qt5 instead of qhelpgenerator when Qt5 is used.
- Add paraview-pythonqt-build-fix.patch to fix build issues with
  PythonQtPlugin; patch taken from upstream.
- Add paraview-build-sciberquesttoolkit-with-opengl2.patch to
  enable building of SciberQuestToolKit even when OpenGL2 is used
  as the default VTK rendering (needs testing).
- Drop require-only-cmake-3_0.patch, cmake >= 3.3 is now required.
- Add documentation linked to from the Help menu in main
  application as additional sources and install them where it
  looks for them (ParaViewGettingStarted-5.2.0.pdf,
  ParaViewGuide-5.2.0.pdf, ParaViewTutorial.pdf).
- Send other docs to %{_docdir} by explicitly passing the cmake
  option VTK_INSTALL_DOC_DIR.

- update to version 5.1.2
  * Rendering translucent geometries: fixed client-server configurations
    when rendering remotely and resolved issues with multiple windows/views
    were present.
  * Exodus reader: Fixed bug in Exodus reader which was causing the reader to
    improperly read files with no timesteps.
  * Fixed the ??? button to show filter documentation.
  * Add option to Ghost Cells Generator filter to specify the number of ghost
    levels to generate.
  * Cinema Fixed SpecB was not revolving the camera around the data centroid.
- adjust require-only-cmake-3_0.patch

- update to version 5.1.0
  + add OSPRay ray tracing renderer
  + interpolating point clouds
  + generic arrays
  + x-ray view
  + resampling to image
  + List of changes at
    http://www.paraview.org/Bug/changelog_page.php?version_id=122
- adjust patch paraview-default-qtstyle.patch
- add require-only-cmake-3_0.patch to lower required CMake version
  to 3.0

- update to version 5.0.1
  + Trace recorder fails for CTH data
  + improvements to cinema
  + Move Show Axis functionality into Edit Axes Grid
  + hover points on is deathly slow remote server
  + CGNS reader not available in non-MPI windows binaries
  + update pvospray
  + Keyboard shortcut Alt+A is assigned twice
  + Rubber band selection is broken
  + List of changes at
    http://www.paraview.org/Bug/changelog_page.php?version_id=126

- Add disk constraint 8GB

- Update to version 5.0.0
  + New Rendering Engine
  + OpenSWR and Mesa support
  + Include OSPray
  + Off-screen rendering with EGL
  + Community Atmosphere Model (Cam5) Catalyst Adaptor
  + Accelerated Algorithms plug-in
  + List of changes at
    http://www.paraview.org/Bug/changelog_page.php?version_id=121

- Update to version 4.4.0:
  + List of changes at
    http://www.paraview.org/Bug/changelog_page.php?version_id=114.
- Drop paraview-freetype-2.5.4.patch: incorporated upstream.

- Update to version 4.3.1:
  + See list of changes at
    http://www.paraview.org/Bug/changelog_page.php
- Packaging changes:
  + Install new file /usr/share/cmake/hdf5/libhdf5.settings

- Add paraview-freetype-2.5.4.patch: Fix build with FreeType 2.5.4
  API changes.

- Update to version 4.2.0:
  + See list of changes at
    http://vtk.org/Bug/changelog_page.php?version_id=108
- Packaging changes:
  + Drop paraview-Mesa10.3-build-failures.patch as this patch has
    been included upstream

- Update to version 4.2.0-RC1:
  + See list of changes at
    http://vtk.org/Bug/changelog_page.php?version_id=108
- Packaging changes:
  + Add paraview-desktop-entry-fix.patch to fix paraview's desktop
    menu entry by properly inserting required key-value pairs
  + Drop paraview-SciberQuestToolKit-install-path.patch; no longer
    needed as properly implemented upstream
  + Rebase carried-over patches to apply cleanly against present
    version
  + Add paraview-Mesa10.3-build-failures.patch to workaround
    build failures when compiling against Mesa >= 10.3; patch
    taken from upstream git and rebased; applied only for
    openSUSE >= 13.2
  + Specfile changes:
  - Prepare for gcc 4.9.0 by working around a compiler
    issue
  - Package .desktop entry and icon files; post(un) scriptlets
    for updating hicolor icon theme and updating desktop menu
    are used
  - Package appdata file
  - Fix python-bytecode-inconsistent-mtime rpmlint warnings by
    recompiling all relevant .py files.

- Build with system zope (python-zope.interface) and twisted
  (python-twisted); introduces BuildRequires and Requires on the
  two packages
- Remove unnecessary Requires on python-matplotlib.

- Update to version 4.1.0:
  + See list of changes at
    http://vtk.org/Bug/changelog_page.php?version_id=102
- Packaging changes:
  + Use full URL for source tarball
  + Drop patches:
  - paraview-fix-vtkpython-modules-install-dir.patch: corrected
    upstream
  - paraview-no-return-in-nonvoid-function.patch: corrected
    upstream
  + Rebase existing patches
  + Also fix a new occurrance of __DATE__ in a source file
    within paraview-fix-file-contains-date-time.patch
  + Change build type to RelWithDebInfo from Release
    (DCMAKE_BUILD_TYPE=RelWithDebInfo).

- Update to version 4.0.1:
  + Undocumented upstream changes
- Changes from version 4.0:
  + Too many to list, see
    http://paraview.org/Bug/changelog_page.php?version_id=52
    for a complete list
- Drop paraview-fix-build-with-system-jpeg.patch; implemented
  upstream
- Use matplotlib during building to enable MathText rendering;
  introduces build time and runtime requirement on
  python-matplotlib
- Add patches:
  + paraview-fix-vtkpython-modules-install-dir.patch: Workaround
    vtk's python modules getting installed in the wrong location;
    upstream bug report at
    http://paraview.org/Bug/view.php?id=14168
  + paraview-fix-file-contains-date-time.patch: Remove reference
    to __DATE__ and __TIME__ from source files
- Use fdupes to link duplicated files.

- Enable python scripting with paraview
  (cmake variable DPARAVIEW_ENABLE_PYTHON:BOOL=ON); had been
  turned off because earlier versions of paraview had some
  building issues with this enabled.

- Revert gl2ps change. TW and 15.4 have a recent gl2ps, and the
  15.3 package will not be upgraded (but is available in science).

- Fixes cli11 dependency for 15.3.
- Drops system gl2ps on Leap 15.x since a higher version of gl2ps
  is needed than the system provided version on Leap 15.x.

- Update to version 5.10.1:
  * User interface:
  - State files appear as datasets.
  - File dialog issues in client/server mode.
  - Stride in Animation View is too restricted.
  - Context menu in file dialog doesn't work on macOS with Qt
    5.15.1.
  - Python tracing fails when a custom source exists.
  - Python Shell broken by any custom filter.
  - Stereo broken in CAVE environments.
  - Parallel Coordinates segfault.
  - Can't set frame rate when saving MP4 animation.
  - command_button widget is not visible anymore.
  - Client information does not show VTK version.
  - Only fetch favorites from server on creation.
  * Filters:
  - Ghost cell generator crash.
  - Redistribute dataset on Image Data then generate Ghost cells
    seems to give the wrong result.
  - TemporalParticlesToPathlines fails with AMReX particle data:
    "The input dataset did not have a valid DATA_TIME_STEPS
    information key".
  * Readers:
  - Sideset error with IOSS reader.
  - IOSS reader is slow with small, parallel dataset.
  - IOSS reader and set variables don't work.
  - Restart file fails with IOSS reader.
  - PIO reader seg faults on warnings for client-server.
  - PIO reader fails on extra file in directory.
  - PIO reader access to restart block and even/odd checkpoints.
  - openPMD: Fix Particle Time Series.
  * Catalyst:
  - Multiple grids with multiple pipelines produces failure in
    coprocessing.py.
  - SaveExtract volumetric cinema database crash.
  * Build:
  - Guard the list of required vtk components for paraview
    package.
  - pqPythonUtils.h not installed.
- Update guide books:
  * ParaViewGettingStarted-5.10.1.pdf.
  * ParaViewTutorial-5.10.1.pdf.
- Adapt defined macros for versioning to be more recyclable.
- Drop some zero-length cmake files from %{_libdir}/cmake/ which
  are useless anyway.

- Drop unused exodusII-devel build dependency (used vendored
  version and defaults to IOSS based exodus reader since PV 5.10).
- Use system gl2ps also on Leap 15.x

- Update to version 5.10.0:
  * Long list of changes, see
    https://gitlab.kitware.com/paraview/paraview/-/blob/master/Documentation/release/ParaView-5.10.0.md
- Drop patches incorporated upstream:
  * paraview-gcc11-limits.patch.
  * paraview-vtkioss-link-pthread.patch.
- Update guides and tutorials.
- Update _constraits to require 22 GiB for build to prevent
  out-of-disk-space build failures.
- Add arguments to cmake command to turn off system installed
  libraries individually where these are not available;
  specifically turn off system vtkcatalyst, exprtk, fmt, and ioss.
- Add paraview-include-sstream.patch -- Add patch from upstream to
  include missing headers and adapt to apply with p1
  (https://gitlab.kitware.com/vtk/vtk/-/merge_requests/8597).
- Add rpmlintrc snippet to suppress warnings about shared lib
  versioning: we use a versioning consistent with package
  major.minor version which is needed due to upstream's otherwise
  inconsistent so versions, but rpmlint does not like this.

- Update constraints for riscv64

- Drop useless ldconfig dependencies for the paraview.rpm
  main package, there are no standard location shared libs in it.

- Add paraview-gcc11-limits.patch: Include limits header wherever
  needed to fix compilation with GCC 11
  [https://gitlab.kitware.com/vtk/vtk/-/issues/18194].

- Update to vetsion 5.9.1:
  * See
    https://gitlab.kitware.com/paraview/paraview/-/blob/master/Documentation/release/ParaView-5.9.1.md.
- Drop paraview-Adaptors-include-txx-file.patch: incorporated
  upstream.