ngspice-shared-30-bp155.2.11

- Update to version 30
  * Bug fixes: 15 bugs that users have reported on the ngspice bug
    tracker have been fixed. Other bugs and some memory leaks have
    been removed as well.
  * New features: The VDMOS model has been overhauled and updated.
    A new variable 'controlswait' allows shifting the command
    sequence in shared ngspice to after the simulation.
  * Documentation: The manual making procedure has been setup anew.
    A html manual may be generated in addition to the pdf version.
- Update to version 29
  * Bug fixes: Small bugs fixed, lots of memory leaks removed.
  * New features: Enhanced compatibility modes with PSPICE (.include
    files or the complete netlist), LTSPICE compatibility started,
    not yet complete. New 'sidiode' simple diode model, new command
    'setseed', new internal variables 'no_auto_gnd' and 'inputdir'.
    Environmental variable SOURCE_DATE_EPOCH is supported.
  * Documentation: Updated pdf manual and other documentation.
- Update to version 28
  * License: All licenses involved are DFSG compatible.
  * Bug fixes: Small bugs fixed, memory leaks removed, code
    reorganized to improve its readability and safety.
  * New features: new VDMOS power MOS model, ngspice reads device
    libs with PSPICE syntax, old apps like ngnutmeg are made only
    upon user reqest, new commands 'mc_source' and 'alterparam',
    instance parameters may be added to the .model line, new
    variable 'sim_status', ngspice shared library supports XSPICE
    digital event data over its interface, pkg-config added .
  * Documentation: Updated pdf manual and other documentation.
- set -fPIE/-pie also on Leap 42.x/SLE12, use LDFLAGS for -pie

- Removed shared library header from non-shared devel package

- Build shared library version of ngspice using the multibuild
  feature.
  Building the shared library version of ngspice requires a separate
  build which doesn't build the binaries and doesn't allow to build
  with the X Window System UI.
  Also it requires the package to be split in several sub-packages:
  * a package containing most of the ngspice binaries.
  * a package containing the shared library and a development
    package for applications using the ngspice API.
  * a code model package for Xspice and a development package
    for code models.
  * a scripts package
- Added -fpie and -pie to CFLAGS to ensure position independent
  executables.

- Update to version 27
  * check for correct inductor coefficients
  * add variable 'win_console'
  * --enable-relpath configure flag to set preprocessor flag HAS_RELPATH
  * sets search path for spinit relativ to current directory
  * The search path for .spiceinit is: current dir, HOME dir, USERPROFILE dir
  * new function stddev to calculate the standard deviation of all elements
    of a vector
  * xspice digital n-input x m-output look-up table gate
  * xspice digital model d_lut (digital n-input look-up table gate)
  * add variable $sharedmode (if shared ngspice is running), to be used in
    scripts
  * enable msys2 for mingw compilation
  * OMP support for bsim3v3.24 model
  * bsim3v3.24: add model parameter lmlt (Channel length scaling)
  * OMP support for BSIM4.5 model
  * update and extension of command 'wrdata'
  * option xmu to set damping in trapezoid integration
  * command 'linearize' will take time data from transient analysis vector if
    no circuit is loaded
  * two new commands: edisplay and eprvcd
  * 'edisplay' will show a list of all event nodes
  * 'eprvcd' will print all event nodes in vcd format
  * XSPICE 2D and 3D table models
  * add variable 'batchmode' which is set when command line option `-b' is
    active
  * enable backquote substitution for Visual Studio console apps
  * update how-to-ngspice-vstudio.txt
  * update visualc directory and project files, add XSPICE code model
    generation by VS2015
  * allow access to 4 GB memory of 32 bit ngspice on 64 bit Windows, 8 TB for
    64 bit ngspice
  * new variable `interactive'
  * xspice, introduce cm_message_printf()
  * add variable `width' to command "print line ..."
  * support msys2
  * favor exponential temperatur equation if all parameters tc1, tc2 and tce
    are given for R
  * move libfftw3 sideways out of the ngspice tree
  * remove visual studio 2008 .vcproj files
  * visualc/sharedspice.vcxproj, updated and migrated with visual studio 2015
  * `E..table {expr} {pairs}', `G..', allow an optional `=' after `table'
  * `E..value=', `G..value=', allow `=' being optional
  * introduce TCE, exponential temperature coefficient for R
  * allow `temper' to be recognised when preceded by '='
  * allow cross-compilation, especially for MinGW-w64
  * allow "plot xlog ylog" (equiv to "plot loglog")
  * extend qa test to hisimhv version 2
  * update hisimhv model to version 2.2.0
  * update hisim model to version 2.8.0
  * .control variable "sqrnoise" to deliver noise data in squared
    representation
  * noise analysis, deliver results in V/sqrt(Hz) and A/sqrt(Hz)
  * add delvt0 for bsim4 models
  * bug fixes for diode model
  * allow a xspice circuit with exclusively xspice event nodes
  * man pages for cmpp ngmakeidx and ngproc2mod
  * implement `nint()'
  * everywhere: ln to the base e, log to the base e, log10 to the base 10
  * allow an optional '=' in ".func foo() = {expr}"
  * bsim4, update to version 4.8
  * update hisimhv to version 1.2.4
  * cmc quality check for bsim3 model
  * nested indexing for vectors
  * option savecurrents to save current through all devices
  * option interp to plot interpolated raw file data
  * MS VS 2010 project file added for compatibility
  * XSPICE: new callback function cm_get_path
- ngspice-fix-warning.patch: Removed - obsolete.
- ngspice-gnuplot-terminal.patch replaced by
  ngspice-Use-gnuplot-terminal-auto-detection.patch

- Revert previous changes as this builds a shared engine only not
  executable binaries.
- Clean up spec file, fix license naming and update copyright year.
- Add verbose building with V=1.
- Add -fPIC and -fopenmp flags to Tumbleweed builds.

- enable shared lib build
- added sub package for shared lib and devel

- Update to version 26
  * fft command may use fftw3 library
  * add nint() rounding function
  * usage of 'temper' in behavioral devices
  * check for soa (safe operating area) in several device models
  * library processing rewritten completely to enhance ngspice
    compatibility (.lib)
  * include file processing rewritten to allow nesting and various
    absolute and relative path names (.inc)
  * asinh, acosh, atanh functions
  * shared ngspice option added: ngspice optionally compiles as
    a shared object or dynamic link library
  * use a hash table to massively speed up parsing the netlist
  * implement a very basic .if/.else block
  * implement a signed power function `pwr' for controlled sources
  * implement multiplier `m' in F, G source
  * apply Area Calculation Method (ACM) to the bsim3v3.3 model
  * implement `tc1', `tc2' instance parameters
- Split documentation to separate package
- Build with cider and openmp support
- Don't set gnuplot terminal, use autodetection
  * ngspice-gnuplot-terminal.patch

- new version ngspice 25

- fix build for i586
- spec file reformating

- new version ngspice 24

- new version 23

- new version 22

- new version 21
- removed info pages, added pdf manual

- new version 20

- packaging fix

- new version 18
- removed build options for older distributions

- added setlibpath_spinit.in.patch for x86_64
  that fixes the load of xspice codemodels

- enabled xspice extentions

- added %%{FORTRAN_GCC} decision

- first spec file