keepalived-2.0.10-6.1

- update to 2.0.10
  - Fix compiling on Alpine Linux.
  - Stop printf compiler warning on Alpine Linux due to rlim_t.
  - manpage cosmetic.
  - Fix removing snmpd read threads when snmpd becomes unavailable.
  - Update to support libipset version 7.
  - Use ipset_printf for ipset messages so can go to log.
  - When opening files for write, ensure files can only be read by
    root.  Issue #1048 referred to CVE-2018-19046 regarding files
    used for debugging purposes could potentially be read by non
    root users.  This commit ensures that such log files cannot be
    opened by non root users.
  - Disable fopen_safe() append mode by default If a non privileged
    user creates /tmp/keepalived.log and has it open for read (e.g.
    tail -f), then even though keepalived will change the owner to
    root and remove all read/write permissions from non owners, the
    application which already has the file open will be able to
    read the added log entries.  Accordingly, opening a file in
    append mode is disabled by default, and only enabled if
  - -enable-smtp-alert-debug or --enable-log-file (which are
    debugging options and unset by default) are enabled.  This
    should further alleviate security concerns related to
    CVE-2018-19046.
  - vrrp: add support to constant time memcmp.  Just an update to
    use best practise security design pattern. While comparing
    password or hmac you need to ensure comparison function is time
    constant in order to figth against any timing attacks. We turn
    off potential compiler optimizations for this particular
    function to avoid any short circuit.
  - Make sure a non privileged user cannot read keepalived file
    output Ensure that when a file such as /tmp/keepalived.data is
    written, no non privileged can have a previous version of that
    file already open, thereby allowing them to read the data.
    This should fully resolve CVE-2018-19046.
- drop b7a98f9265ffb5927c4d54c9a30726c76e65bb52.patch: included in
  update

- added b7a98f9265ffb5927c4d54c9a30726c76e65bb52.patch to fix
  building with libipset >= 7

- update to 2.0.9
  - Fix updating a timer thread's timeout.  Issue #1042 identified
    that the BFD process could segfault. This was tracked down to a
    timer thread which had already expired having its timeout
    updated by timer_thread_update_timeout().  The sands timer
    should only be updated if the thread is on a waiting queue, and
    not if it has already timed out or it is unused.
  - Don't requeue read thread if it is not waiting.  This update
    matches commit 09a2a37 - Fix updating a timer thread's timeout
    should.
  - Allow BFD instance to recover after send error.  If sendto
    failed in bfd_send_packet(), the bfd instance was put into
    admin down state, but there was no means for the bfd instance
    to transition out of admin down state.  This commit makes
    keepalived log the first instance of a sequence of failures to
    send a bfd packet, but does not bring the bfd instance down in
    case the error is a transient error. If the error is longer
    lasting, the remote system will timeout, transition to down
    state, and send a message saying it is down.  Once the bfd
    instance can start sending again the bfd instance can now
    transition again to up state.
  - Make DGB definition use log_message() rather than syslog().
  - Fix building with --enable-debug configure option.
  - Start list of required kernel features in INSTALL file.  Issue
    [#1024] asked what kernel features are needed to support
    keepalived.  The simple answer was that it isn't recorded
    anywhere, so this is a start of making a list of the features
    required.
  - Make list_remove() call list free function and add
    list_transfer().  If an element is being removed from a list,
    the free function should be called.  list_transfer() allows a
    list element to be moved from one list to another without
    freeing and reallocating the list element control information.
  - Add mem_check diagnostics re calling functions of list
    functions.  When using mem_check, mallocs and frees were
    recorded against the list functions, and the originating
    functions weren't identified.  This patch adds recording of the
    functions calling the list functions so that the originating
    function is identified.
  - Simplify the processing of comments in configuration files.
    This commit moves the handling (and removal) of comments to a
    single function (called from read_line()) which simplifies the
    processing of config files.
  - Add ~SEQ(start, step, end) config functionality Where a
    configuration has repeated blocks of configuration where the
    only thing that changes is a numeric value (e.g. for VRIDs from
    1 to 255) this allows the block to be defined once, and a
    single line using ~SEQ can then generate all the blocks.
  - Use REALLOC when building a multiline definition.  The code
    used to use MALLOC, strcpy() and FREE, but REALLOC can do all
    this for us.
  - Improve mem-check diagnostics.  When using an allocation list
    of over 50,000 entries, it was quite slow searching thtough all
    the entries to find the matching memory allocation, and to find
    free entries. This commit changes to using malloc() to create
    entries, and a red-black tree to hold the entries. It also has
    a separate list of free entries.  This commit also adds 4 more
    types of memory allocation error, and improves the consistency
    of the entries in the log files.
  - Don't attempt to delete VMAC when underlying interface is
    deleted.  If the underlying interface of one of our vmacs is
    deleted, and we know the vmac has been deleted, don't attempt
    to delete it again.
  - Include master state in determining if vmacs are up or down
    Netlink doesn't send messages for a state change of a macvlan
    when the master device changes state, so we have to track that
    for ourselves.
  - Turn off parser debugging.
  - Make test/mk_if create iptables chains.
  - Handle interfaces not existing when keepalived terminates.  If
    the underlying interface of a vmac we created has been deleted,
    the vmac will not exist so don't attempt to delete it again.
    Also, don't attempt to reset the configuration of the
    underlying interface.
  - Handle the underlying interface of a macvlan interface going
    up/down.  The kernel doesn't send netlink messages for macvlans
    going up or down when the underlying interface transitions (it
    doesn't even update their status to say they are up/down), but
    the interfaces don't work. We need to track the state of the
    underlying interfaces and propagate that to the macvlan
    interfaces.
  - Fix duplicate value in track_t enum.
  - Fix check for matching track types.
  - Treat macvtap interfaces in the same way as macvlan interfaces.
  - Improve handling of interfaces not existing when keepalived
    starts.
  - Fix handling interface deletion and creation of vmacs on
    macvlan i/fs.
  - When interface created, open sockets on it if used by VRRP
    directly If an interface is created that has vrrp instances
    configured on it that don't use VMACs, or use vmac_xmit_base,
    then the raw sockets must be opened.
  - Force seeing a transition to up state when an interface is
    created.
  - Fix netlink remnant data error.
  - Add command line and configuration option to set umask.  Issue
    [#1048] identified that files created by keepalived are created
    with mode 0666. This commit changes the default to 0644, and
    also allows the umask to be specified in the configuration or
    as a command line option.
  - Fix compile warning introduced in commit c6247a9.  Commit
    c6247a9 - "Add command line and configuration option to set
    umask" introduced a compile warning, although the code would
    have worked OK.
  - When opening files for write, ensure they aren't symbolic
    links.  Issue #1048 identified that if, for example, a non
    privileged user created a symbolic link from
    /etc/keepalvied.data to /etc/passwd, writing to
    /etc/keepalived.data (which could be invoked via DBus) would
    cause /etc/passwd to be overwritten.  This commit stops
    keepalived writing to pathnames where the ultimate component is
    a symbolic link, by setting O_NOFOLLOW whenever opening a file
    for writing.  This might break some setups, where, for example,
    /etc/keepalived.data was a symbolic link to
    /home/fred/keepalived.data. If this was the case, instead
    create a symbolic link from /home/fred/keepalived.data to
    /tmp/keepalived.data, so that the file is still accessible
    via /home/fred/keepalived.data.  There doesn't appear to be a
    way around this backward incompatibility, since even checking
    if the pathname is a symbolic link prior to opening for
    writing would create a race condition.
  - Make netlink error messages more meaningful.
  - Fix compiling without support for macvlans.
  - fix uninitialized structure.  The linkinfo and linkattr
    structures were not initialized, so we should not expect that
    unexistant attributes are set to NULL. Add the missing
    memset().
  - fix socket allocation with dynamic interfaces.  When there are
    several vrrp instance binding different interfaces that don't
    exist at startup, their ifindex is set to 0 in the sock. The
    function already_exist_sock() that lookup for an existing
    socket will always return the first sock because the ifindex is
    the same.  Later, when an interface appears, the fd will be
    created for one instance, and all instances will wrongly use
    this fd to send the advertisments.  Fix this by using the
    interface structure pointer instead of the ifindex as the key
    for sock lookup.  The problem was identified by Olivier Matz
    who also provided a patch fixing the problem. This patch is a
    slight rework of Olivier's patch, better using the existing
    data structures that keepalived already holds.
  - When creating a macvlan interface, use AF_UNSPEC rather than
    AF_INET.
  - Stop using libnl for configuring interfaces.  Since there is
    code to configure the interfaces using netlink without using
    libnl, there is no point in having code to do it using libnl.
  - Fix building on Centos 6.5.
  - Stop including some files not needed after libnl removal for
    i/fs.
  - Fix some compilation issues when building without vrrp support.
  - Stop using linbl for mcast group membership and setting rx buf
    sizes.  Since there is code to handle multicast group
    membership and setting kernel netlink receive buffer sizes
    without using libnl, there is no point in having code to do it
    using libnl.  This now means that the vrrp functionality no
    longer uses libnl.
  - Add some sanity checking of configure options.  Certain invalid
    combinations of configure options could cause compile errors,
    e.g. --disable-vrrp --enable-vrrp-fd-debug. This commit ensures
    that invalid combinations aren't allowed, in order to stop the
    compile errors.
  - Fix invalid configuration combination caught by previous
    commit.
  - Use netlink to set/clear rp_filter on interfaces.
  - Fix configure for building without vrrp.
  - Actually update the .travis.yml file to fix the problem.
  - Fix conditional compilation re epoll-thread-dump debugging.
  - Update INSTALL file now no longer use libnl-route-3.
  - Stop cast to incompatible function type warnings from gcc 8.1.
  - Update snapcraft.yaml not to include libnl-route-3.
  - keepalived exit with non-zero exit code if config file not
    readable.
  - Allow specifying default config file at configure time.
  - Use keepalived define for exit code when malloc failure.
  - Fix configuring fixed interface type.
  - Add configuring keepalived default configuration file.
  - Fix return value in get_time_rtt() error path.
  - Update generation of git-commit.h.
  - snapcraft.yaml: Enable all sensible build options. Preserve
    build time version in the snap version. Expose genhash.
  - snapcraft.yaml: Build keepalived with Linux 3.13 headers.
  - snap: Add an install hook to make sure a keepalived
    configuration exists.
  - snap: Move the hooks to the correct location.
  - snap: Make sure /etc/keepalived exists.
  - Fix building with IP_MULTICAST_ALL in linux/in.h but not
    netinet/in.h Issue #1054 identified that configure was checking
    the definition of IP_MULTICAST_ALL in linux/in.h but including
    netinet/in.h, which also has the definition, but only from
    glibc 2.17.  This commit creates a local definition (in
    lib/config.h) of IP_MULTICAST_ALL if it is defined in
    linux/in.h but not in netinet/in.h. The reason for this is that
    compiles using linux/in.h fail due to conflicting definitions.
  - Fix creating iptables tables in mk_if.
  - Update .travis.yml to use xenial.
  - Update .travis.yml to add --enable-regex option.
  - Tidy up .travis.yml file.
  - snap: Build multiple keepalived binaries.
  - Updated snapcraft builds to support multiple kernel versions.
- drop patches:
  - 5241e4d7b177d0b6f073cfc9ed5444bf51ec89d6.patch
  - c6247a9ef2c7b33244ab1d3aa5d629ec49f0a067.patch
  - 04f2d32871bb3b11d7dc024039952f2fe2750306.patch
- refreshed patch: linux-4.15.patch

- update to 2.0.8
  - Improve identifing interface as macvlan when reading interface
    details
  - Enslave a VMAC to the VRF master of the underlying interface.
  - Use addattr32 rather than addattr_l for if_index.
  - Only include VRF support if kernel headers support it.
  - Fix --enable-timer-debug configure option.
  - Fix some configure.ac enable option tests.
  - Include stdbool.h in process.c.
  - Fix diagnostic message re ignoring weight of tracked interface.
  - Fix track_bfds with weights.
  - Correct conditional compilation definition name.
  - Fix memory leak in HTTP_GET/SSL_GET.
  - Fix two memory leaks in DNS_CHECK.
  - Don't consider retries for BFD_CHECK. The BFD_CHECKer doesn't
    support retries, and the check was causing the checker not to
    transition to down state.
  - Fix memory leak with BFD_CHECK.
  - Restart global notify FIFO handler after reload.
  - modify @WITH_REGEX@ to @WITH_REGEX_TRUE@
  - Fix compiling without BFD support.
  - Stop bfd process sending double the number of packets.  If a
    bfd process received an initial bfd packet, it scheduled a
    second bfd_sender_thread thereby causing two packets to be sent
    in every interval.
  - Use timerfd for select timeouts rather than select timeout
    parameter This is a precursor to moving to using epoll.
  - Use epoll rather than select.  epoll is both more efficient
    than select and also doesn't have a file descriptor limit of
    1024, which limited the number of vrrp instances that could be
    managed.  This commit also introduces read-black trees and the
    list_head list type.
  - Add --enable-timer-check option for logging calls for getting
    time Calls to update the current time from the kernel are made
    too frequently, and this patch logs when the calls are made,
    and how long since the previous call, so unnecessary calls can
    be removed.
  - Add debug option for monitoring epoll queues.  This is enabled
    by --enable-epoll-debug and replaces --enable-timer-debug.
  - Use system monotonic clock to generate a monotonic clock.
    Rather than have our own code for creating a monotonic clock,
    use the kernel's monotonic clock.
  - Make some functions in timer.c inline.  The functions had one
    line of code so inlining them is more efficient.
  - Fix requeueing read and write threads after read/write
    timeouts.
  - Fix initial allocating and final freeing of thread_master
    epoll_events.
  - When cleaning up threads, also clean up their thread_events.
  - Add thread_close_fd() function to release thread_event_t on
    close When a file descriptor that has been monitored by epoll
    is closed the thread_event_t structure used for managing epoll
    for that fd has to be release. Therefore calls to close() and
    replace by calls to thread_close_fd().
  - Make parent process write log entry when it is reloading.
  - Move checking for thread timeouts to timerfd_handler There is
    no point in checking for thread timeouts if the timerfd isn't
    readable; in other words only check for thread timeouts if the
    timer has expired.
  - Make bfd reschuling timer threads more efficient.
  - Streamline DNS_CHECK code.
  - Fix buffer overrun with track file path names.
  - Add timestamp when writing mem_check entries to file.
  - Ensure thread_event_t released for ready threads at
    termination.
  - Increase open file limit if large number of VRRP instances.
    Each VRRP instance can use up to 2 file descriptors, and so if
    there are more than 500 ish VRRP instances the number of open
    files can exceed the default per process limit (1024 on my
    system).  The commit allows 2 file descriptors per vrrp
    instance plus a few more, and if the RLIMIT_NOFILE value
    returned by getrlimit isn't high enough, keepalived will
    increase the limit.
  - Ensure that child processes run with standard
    priorities/limits.  When child processes such as notify
    scripts, track_scripts and MISC_CHECK scripts are run, they
    should not inherit any elevated priorities, system limits etc
    from the parent keepalived process.
  - Change multiple spaces to tabs in scheduler.h.
  - Add family to sockpool listing.
  - Fix a multiline definition expansion issue.
  - Free allocated cache when closing/freeing netlink socket.  When
    running on a system with 500+ interfaces configured and adding
    1000 VMAC interfaces, the heap was growing by 340Mb due the
    netlink cahce not being freed after creating each VMAC
    interface. With this patch the heap only grow by 3.7Mb (if
    creating 1000 VMAC interfaces the heap grep by 905Mb now
    reduced to 6.1Mb).
  - Stop using netlink cache when adding and configuring VMAC
    interfaces.  When running on a system with 500+ interfaces
    configured and adding 1000 VMAC interfaces, it was taking 2.3
    seconds to add the interfaces.  Without populating a netlink
    cache each time a VMAC interface is created it now takes 0.38
    seconds to add the interfaces (if creating 1000 VMAC interfaces
    it was taking 6.1 seconds, now reduced to 0.89 seconds, and the
    heap growth is reduced from 6.1Mb to 3.9Mb).
  - Add function rtnk_link_get_kernel for dynamic linking.
  - Fix compiling without JSON support.
  - Add support for recording perf profiling data for vrrp process.
  - Add comment re usage of MAX_ALLOC_LIST.
  - Some streamlining of scheduler.c.
  - Merge --enable-epoll-debug and --enable-dump-threads
    functionality.
  - Let thread_add_unuse() set thread type, and use
    thread_add_unuse() more.
  - Use break rather than return in process_threads().
  - Fix segfault when reloading with HTTP_GET and no regex
    configured.
  - Merge the next-generation scheduler.
  - Make all debug options need enabling at runtime.  Previously if
    configure enabled a debug option its output was always
    recorded, which meant that if one didn't want the output,
    configure/ compile was needed. This commit adds command line
    options that need to be set in order to turn the debugging on.
  - Remove unwanted debug message.
  - Fix parsing --debug options.
  - Fix rb tree insertion with timers.
  - Add missing functions for thread debugging.
  - Add vrrp instance VMAC flags when dumping configuration.
  - Ensure parent thread terminates if child has permanant config
    error.
  - Ensure don't delete VMAC interface if keepalived didn't create
    it.  and sundry fixes.
  - If receive lower priority advert, send GARP messages for sync
    group.  A recent update to issue #542 identified that following
    recovery from a split brain situation, GARP messages weren't
    being sent. It transpired that, if a member of a sync group in
    master state received a lower priority advert and
    vrrp_higher_prio_send_advert is set, a further (lower priority)
    advert is sent, and the instance and all the members of the
    sync group transition to backup (the other members of the sync
    group don't send a further advert since they haven't received a
    higher priority advert). This meant that the other members of
    the sync group on the keepalived instance that remained master
    didn't receive a lower priority advert, and so didn't send
    further GARP messages.  This commit changes keepalived's
    behaviour, so that if a vrrp instance is sending GARP messages
    due to receiving a lower priority advert and it is a member of
    a sync group, keepalived will also send GARP messages for any
    other member of the sync group that have garp_lower_prio_rep
    set.
  - Allow 0.0.0.0 and default/default6 for rule/route to/from
    addresses.
  - Check return value of SSL_CTX_new().
  - Check return values of SSL_new() and BIO_new_socket().
  - Only allow subnet masks with routes or virtual IP addresses.
    For example, if specifying a via address or preferred source
    address for a route, it isn't valid to specify a subnet mask.
  - Add inet/inet6 to specify ip route/rule family if ambiguous.
  - Remove superfluous parameter from parse_route().
  - Add "any" and "all" as synonyms for "default".
  - Fix memory leak if route destination address is wrong address
    family.
  - Add ttl-propagate route option.
  - Fix checking return status of kill().
  - Fix building with --enable-debug configure option.
  - Stop delay in reload when using network namespaces.  If running
    in a network namespace, getaddrinfo() could take over 30
    seconds before timing out while trying to contact a name
    server. To alleviate this, the hostname is remembered from when
    keepalived started.
  - Fix spelling of propagate in propagate_signal().
  - Fix effective_priority after reload if tracked interface down.
  - Cosmetic grammatical changes.
  - Add debug option for dumping vrrp fd lists.
  - Fix calculation for vrrp fd timers.  Starting or reloading
    keepalived when an interface that was tracked interface was
    failed was stopping other vrrp instances that were on the same
    interface but not using VMACs coming up.
  - Move code for initialising tracking priorities to vrrp_track.c.
  - Don't overwrite track file on reload.
  - Don't attempt to write track file if path not specified.
  - Fix compiling when not using --enable-vrrp-fd-debug.
  - Fix compiling with configure --enable-vrrp-fd-debug.
  - Add sync group track_bfds and track file status to config dump.
  - Move initialisation of track_files.
  - Don't alter effective_priority if track_file take vrrp instance
    down.
  - Don't log vrrp instance in fault state at reload if already
    fault.
  - Fix calculating fd timer if all vrrp sands are set to
    TIMER_DISABLED.
  - Don't make all sync groups transition to backup on reload If a
    sync group was in master state, and can still be after a reload
    then allow it to stay in master state.
  - Don't have track_bfd list in vrrp_sgroup_t in BFD not enabled.
  - Fix memory leak re vrrp_sgroup_t track lists.
  - Tidy up some freeing of MALLOC'd memory.  Use FREE_PTR if it is
    not known if the pointer is valid, and don't clear the pointer
    afterr FREE/FREE_PTR since FREE does it anyway.
  - Add memory.c list size definition and move definition from
    memory.h.
  - Increase size of checksum value for MEM_CHECK.
  - Don't store checksum of memory allocation block. It can be
    calculated from the size, so do so.
  - Make the checksum for memory allocation blocks unsigned.
  - Use an enum for memory allocation block types.
  - Update comment re debug bit for memory detect error.
  - In memory alloc debug code report free or realloc for not
    alloc'd.
  - Allow for PIDs up to 2^22 (7 decimal digits).
  - Add function for dumping memory allocation while running.
  - Fix max memory allocation size calculations.
  - Fix reporting original and new file/line/func for realloc.
  - Check matching block for realloc is allocated.  The same memory
    block may have been previously allocated and freed, so we need
    to make sure that the block we find is currently marked as
    allocated.
  - Use a new MEMCHECK struct for realloc overrun detected It was
    marking the allocated block as an overrun block, whereas it
    needs to be an allocated block, so use a new block to mark the
    overrun.
  - Tidy up working of a couple of memory allocation messages.
  - Use for loops rather than while blocks in memory allocation
    code.
  - Report number of mallocs and reallocs with MEMCHECK.
  - Attempt to log first free after double free in MEMCHECK.
  - Streamline use of buf/buffer in memory.c.
  - Always use first free entry in alloc_list for MEMCHECK.
  - Define MEMCHECK alloc_list size via configure.
  - Align keepalived_free() and keepalived_realloc().
  - Make char * const where possible for MEMCHECK.
  - Merge MEMCHECK keepalived_free() and keepalived_realloc().
    Most of the code was common between the two (or should have
    been), so it makes sense for them to use common code.
  - Ensure only relevant thread types run during shutdown.
  - Fix building without --enable-mem-check.
  - Use rbtree search for finding child thread on child
    termination.  It was doing a linear search of the rbtree in
    timeout order. This commit adds another rbtree for child
    processes (vrrp track scripts and check_misc scripts), sorted
    by PID, to make the search by PID more efficient.
  - Make rbtree compare function thread_timer_cmp() more efficient.
  - Remove child_remover functionality - it was superfluous.
  - Fix checking that there are no duplicate vrrp instances
    configured The tuple {interface, family, vrid} must be unique.
    The check for this was being made completely incorrectly.
  - Delay creating vrrp notify FIFO.
  - Remove struct sockaddr_storage saddr from sock_t.
  - Use an rbtree for finding vrrp instance for received advert.
    Previously the code search a list of pointers to vrrp instances
    and looked for a matching fd and vrid. In order to optimise
    this, it was implemented using an mlist whose index was a hash
    of the fd and vrid.  This commit changes the approach and uses
    an rbtree for each sock_t.  Since the sock_t that the advert
    was received on is known, the rbtree search is only searching
    for a match on the vrid.  Not only is this more efficient, but
    it is simpler, uses standard code, and reduces the code by
    over 60 lines.
  - Use an rbtree for finding vrrp instance for socket timeout.
    Previously the code search a list of pointers to vrrp instances
    and looked for matching file descriptor and sands < time_now.
    In order to optimise this, it was implemented using an mlist
    whose index was a hash of the fd.  This commit changes the
    approach and uses a second rbtree for each sock_t.  Since the
    sock_t that the timeout occurred on is known, the rbtree search
    is only searching for a match of the sands.  Not only is this
    more efficient, but it is simpler, uses standard code, and
    reduces the code by over 220 lines.
  - Remove superfluous checks of rbtree node != NULL in rb_move().
  - Remove superfluous check of node != NULL in rb_next().
  - Update rbtree code to Linux 4.18.10.
  - Fix debug logging of sands timers before time_now.
  - Update rb_for_each_entry etc and rb_move to use rb_entry_safe.
    With the added definition of rb_entry_safe in the rbtree code
    updated to Linux 4.18.10, the refinition of rb_entry was
    reverted to the kernel definition. That meant that
    rb_for_each_entry, rb_for_eacn_entry_safe and rb_move neded to
    be updated to use rb_entry_safe rather than rb_entry.
  - Add support functions for rbtree rb_root_cached.  This is in
    preparation for the use of rb_root_cached in the next patch.
  - Use cached rbtrees where the key is a timeval_t sands When the
    key of an rbtree is a timeval_t sands keepalived will
    frequently need to access the first node of the tree in order
    to calculate the next timeout. This applies to the read, write,
    child and timer threads queues, and also the vrrp queues on a
    sock_t.  The use of cached rbtrees for these is ideal since it
    gives direct access to the first node of the queue.
  - Add thread_add_read_sands to avoid introducing timer errors.
    When using thread_add_read and the timeout was held as
    timeval_t, it was converted to and offset from time_now, and
    then converted back to a timeval_t, but time_now was updated,
    resulting in a slightly different value being used as the
    timeout. Using thread_add_read_sands() avoids the double
    conversion and results in the timeout being more accurate.
  - Replace NETLINK_TIMER with TIMER_NEVER.  It makes the code
    easier to read, and since NETLINK_TIMER was defined to be
    TIMER_NEVER it doesn't change the functionality.
  - Handle preempt delays not expiring at same time on sync group
    If different vrrp instances in a sync group had preempt delays
    that expired at different times keepalived looped with very
    small to epoll_wait() until all preempt delays had expired,
    causing high CPU utilisation.  Keepalived now reschedules vrrp
    instances with a delay of 3 * advert_int + skew time while
    waiting for all vrrp instances in the sync group to expire
    their preempt delays.
  - Fix segfault when receive netlink message for default route
    added.
  - Move vrf_master_index into conditional compilation block.
  - Store interface macvlan type.
  - Make vrp_master_ifp point to self for VRF master interfaces.
  - Log if cannot create a VMAC due to existing interface with same
    name.
  - Handle delete/create of macvlan i/fs which aren't keepalived's.
  - Tidying up keepalived_netlink.c.
  - Handle VRFs changing on macvlan i/fs which have VMACs
    configured on them.
  - Fix recreating our VMACs if they are deleted.
  - Fix detecting address add/deletion from underlying i/f of our
    vmacs.
  - Don't use configured_ifp or base_ifp if not _HAVE_VRRP_VMAC_.
  - Distinguish between VMAC on real i/f and no VMAC on macvlan i/f
    If keepalived is configured to have a non VMAC interface on a
    macvlan interface, we want to use the macvlan interface rather
    than the underlying interface, whereas if we have a VMAC
    interface on a macvlan interface, we create the VMAC on the
    underlying interface of the macvlan.
  - Update duplicate VRID check where vrrp instance configured on
    macvlan.  If a VRRP instance is configured on a macvlan
    interface, the duplicate VRID check needs to be done on the
    underlying interface.
  - Check for VRID conflicts when changeable interfaces are added
    For example, a vrrp instance could be configured on a macvlan,
    and that macvlan could be deleted and recreated with another
    base interface.  The VRIDs in this case need to be checked for
    duplicates against the base interface, and so the VRID check
    needs to be done dynamically.  In order to allow VRID conflicts
    to produce config errors at startup, by default keepalived
    assumes that there won't be interface movements as described
    above, and will only handle it if the global_defs option
    'dynamic_interfaces' is used along with the option
    'allow_if_changes'.
  - Remove some comments inserted for tracking changes to code.
  - Fix building with --enable-debug configure option.
  - Check that '{'s and '}'s are balanced in the configuration
    file.
  - Allow more flexibility re placing of { and }.
  - Improve reporting additional '}'s in configuration.
  - Minor improvements re thread handling and cancellation.
  - Remove unused THREAD_IF_UP and THREAD_IF_DOWN.
  - Replace getpagesize() with sysconf(_SC_PAGESIZE).
  - Increase netlink receive buffer for dumps to 16KiB.
  - Dynamically set the netlink receive buffer size.
  - Sort out setting netlink receive buffer size.
- added patches for changes found during the review of the dbus
  code: (boo#1015141)
  CVE-2018-19044 for
  https://github.com/acassen/keepalived/commit/04f2d32871bb3b11d7dc024039952f2fe2750306.patch
  CVE-2018-19045 for
  https://github.com/acassen/keepalived/commit/c6247a9ef2c7b33244ab1d3aa5d629ec49f0a067.patch
  https://github.com/acassen/keepalived/commit/5241e4d7b177d0b6f073cfc9ed5444bf51ec89d6.patch
- enable dbus support on TW by default (boo#1015141)
- enable json stats dump support

- use %license

- update to 2.0.7
  see /usr/share/doc/packages/keepalived/ChangeLog
- refreshed keepalive-init.patch:
  - reduced patch to minimal changes
  - made sure it actually reads our sysconfig file
- refreshed linux-4.15.patch
- enable http regexp support: new BR pcre2-devel
- update rpmlintrc to actually match the error message: glob vs
  regexp

- Only Require insserv on distributions without systemd.
- Fix systemd related requires/buildRequires
- Do not run scriptlets that use insserv when using systemd

- add linux-4.15.patch

- update to 1.4.1:
  * Improve and fix use of getopt_long().
    We musn't use a long option val of 1, since getopt_long() can return
    that value.
    getopt_long() also returns longindex == 0 when there is no matching
    long option, and there needs to be careful checking if there is an
    error to work out whether a long or short option was used, which is
    needed for meaningful error messages.
  * Write assert() messages to syslog.
    assert()s are nasty things, but at least let's get the benefit of
    them, and write the messages to syslog, rather than losing them down
    stderr.
  * Enable sorry server at startup if quorum down due to alpha mode
    If alpha mode is configured on sufficient checkers so that a
    virtual server doesn't have a quorum, we need to add the sorry
    server at startup, otherwise it won't be added until a quorum has
    been achieved and subsequently lost again. In the case where some
    of the checkers remain in the down state at startup, this would have
    meant that the sorry server never got added.
  * For virtual servers, ensure quorum <= number of real servers
    If the quorum were gigher than the number of real servers, the
    quorum for the real server to come up could never be achieved, so
    if the quorum is greater than the number of real servers, reduce it
    to the number of real servers.
  * Fix some SNMP keepalived checker integer types and default values.
    Some virtual server and real server values were being sent to SNMP
    with a signed type whereas the value is unsigned, so set the type
    field correctly.
    Some virtual server and real server values that apply to checkers
    are set to nonsense default values in order to determine if a
    value has been specified. Handle these values when reporting them
    to SNMP replying with 0 rather than a nonsense value.
  * Fix some MALLOC/FREE issues with notify FIFOs.
  * Add instance_name/config_id to alert emails' subjects if configured.
    If multiple instances of keepalived are running, either different
    instance_names and/or config_ids, it is useful to know which
    keepalived instance the email relates to.
  * Ensure that email body string isn't unterminated.
    Using strncpy() needs to ensure that there is a nul termination byte,
    so this commits adds always writing a nul byte to the end of the buffer.
  * Remove duplicate fault notification.
  * Fix problem with scripts found via PATH with a '/' in parameters.
    Recent discussions on issue #101 led to discovering that if an
    executable without a fully qualified name was specified as a script
    and there was a '/' character in the parameters, then the path
    resolution would not work.
  * Send SNMP traps when go from backup to fault due to sync group.
    Commit 020a9ab added executing notify_fault for vrrp instances
    transitioning from backup to fault state due to another instance
    in the sync group going to fault state. This commit adds sending
    SNMP traps in the same circumstance.
  * Revert "Add instance_name/config_id to alert emails' subjects if
    configured". This should be handled by setting router_id
  * Add config option to send smtp-alerts to file rather than send emails
    This is useful for debugging purposes.
  * Add additional entry to Travis-CI build matrix.
  * Fix segfault if no sorry server configured for a virtual server.

- enable json stats and config dump support
  new BR: pkgconfig(json-c)
- disable dynamic loading of libipset and link it instead
- enable stacktrace support
- turn on snmp-rfcv2 and snmp-rfcv3 support
- do not reference the keepalived.socket in the rpm scriptlets

- update to 1.4.0
  * Add Linux build and runtime versions to -v output.
  * Log kernel version and build kernel version to log at startup.
  * Don't sleep for 1 send when exiting vrrp process if no vrrp instances.
  * With large configurations the syslog can get flooded and drop output.
    This commit adds options to not log to syslog, and also to log all
    output to files.
  * Add option to only flush log files before forking.
  * Don't poll netlink for all interfaces each time add a VMAC.
    We can poll for the individual interface details which significantly
    reduces what we have to process.
  * Print interface details in keepalived.data output.
  * Add high performace child finder code.
    The code to find the relevant thread to execute afer a child process
    (either a vrrp track script or a misc_check healthchecker) was doing
    a linear search for the matching pid, which if there are a large number
    of child processes running could become time consuming.
    The code now will enable high performance child finding, based on using
    mlists hashed by the pid, if there are 32 or more vrrp track scripts or
    misc check healthcheckers. The size of the mlist is based on the number
    of scripts, with a limit of 256.
  * Improve high performance child termination timeout code.
  * Preserve filename in script path name resolution.
    Some executables change their behaviour depending on the name by
    which they are invoked (e.g. /usr/sbin/pidof when it is a link to
    /usr/sbin/killall5). Using realpath() changes the file name part
    if it is a symbolic link. This commit resolves all symbolic links
    to directories, but leaves the file name part unaltered. It then
    checks the security of both the path to the link and the path to
    the real file.
  * Handle scripts names that are symbolic links properly.
  * Fix some RFC SNMP issues.
  * Fix removing left-over addresses if keepalived aborts.
  * Update openssl use to stop using deprecated functions
    openssl from version 1.1 deprecated certain functions that keepalived
    was using. This commit ceases using those functions if the version
    of openssl is >= 1.1.
  * Allow sync groups with only 1 member, but issue a warning.
  * Add replaceable parameters in configuration files.
  * Add multiline configuration definitions.
  * Fix keepalived.conf(5) man page.
  * Suppress error message when removing leftover addresses at startup.
  => find more changes at /usr/share/doc/packages/keepalived/
- rebase keepalive-init.patch
- use upstream systemd service file instead providing an own one
  => removed keepalived.service
- remove executable bit from samples in docdir
- check that LVS support is enabled
- optionally enable dump configuration and stats as JSON (via bcond)
  => BuildRequire libjson-c-devel
- restrict /etc/keepalived permissions to root

- Do not suppress errors from useradd.
- Ensure neutrality of description.

- update to 1.3.9:
  Revert using github tarball and use original source again.
  Too many fixes and features to list, refer to
  /usr/share/doc/packages/keepalived/ChangeLog for a detailed list.

- Replace references to /var/adm/fillup-templates with new
  %_fillupdir macro (boo#1069468)

- use tarball from https://github.com/acassen/keepalived/issues/524
  the original tarball did not build. This has the necessary fix
  applied. for the 1.3.4 update see the TODO entry in the preamble.

- update to 1.3.3
  Some minor fix, extensions and updates. snapcraft support. Refer
  to /usr/share/doc/packages/keepalived/ChangeLog for more infos.

- fix building with libnfnetlink. the additional include path needs
  to be in CPPFLAGS instead of CFLAGS now.
- enabled a few more features:
  - enhanced snmp support (V2/V3 RFC)
  - make sure we build with ipset/libiptc and routes support
- prepared dbus support: waiting for boo#1015141

- update 1.3.2
  - Security focused on notify heplers. Some minor fix and
    extensions.
  - changes from 1.3.1
  - Quick script fix for regression brought by last release.
  - changes from 1.3.0
  - New MAJOR release with stabilization fixes. Support to DBus.
    Conf extensions. Parser error log. Security extensions to run
    scripts more secure.
  - changes from 1.2.24
  - MAJOR release with stabilization fixes and new features like
    support to network namespace.
  Refer to /usr/share/doc/packages/keepalived/ChangeLog
  for more infos.

- update to 1.2.23
  Some VRRP fixes. Some Healthcheckers fixes.
  Refer to ChangeLog for more infos.

- update to 1.2.22
  Some VRRP fixes. Refer to ChangeLog for more infos.
- update to 1.2.21
  Some fixes for last major release 1.2.20. Extensions on vrrp
  framework. Refer to ChangeLog for more infos.
- update to 1.2.20
  BUNCH of extensions, fixes, cleanup & production considerations.
  Distro packages maintainers are strongly encouraged to upgrade.
- new BR libnfnetlink-devel
- we no longer ship the VRRP-MIB

- enhanced keepalive-init.patch :
  + replace tabs with spaces
  + read /etc/sysconfig/keepalived, if exists and use the settings
    there instead of the default KEEPALIVED_OPTIONS in case the
    user changed them

- use package name buildrequires on sle11 to fix building

- enable snmp for better monitoring
- enable sha1 support

- Update to version 1.2.19:
  + vrrp: fix checksum computation in vrrp v2 for socket family
    AF_INET.
  + Some cosmetics at Makefile stuff.
- Changes from version 1.2.18:
  + some cosmetics changes (in memory and parser).
  + remove dead/not used code.
  + revert notify script brought by last release.
  + revert VRRP preemption speed up extension.
  + vrrp: ix vrrp removes incorrect IPv4 address when VIPs are
    removed.
  + vrrp: Re-enable VRRPv2 checksum on inbound pkts.
- Changes from version 1.2.17:
  + zalloc use xalloc for consistency.
  + memory: fix wrong size calculation in zfree.
  + Fix keepalived snmp configuration.
  + Change comments to match kernel style.
  + smtp: Fix wrong algorithm in RCPT-TO building.
  + Lots of vrrp fixes.
- Changes from version 1.2.16:
  + Properly close netlink channel to avoid fd leak.
  + Use getaddrinfo instead of gethostbyname to workaround glibc
    gethostbyname function buffer overflow (boo#949238).
  + Lots of ipvs fixes.

- no longer install the init script on systemd systems

- Update to version 1.2.15:
  + Bugfixes.
- Changes from version 1.2.14:
  + VRRP bugfixes and extensions. IPVS bugfixes and code code
    cleanup.
- Changes from version 1.2.13:
  + VRRP fixes and extensions. Extrend and unify checker
    framework.

- Build with -DOPENSSL_NO_SSL_INTERN, if package starts accessing
  the SSL library internals it must fail to build now, in upcoming
  openSSL versions structures are opaque.
- BuildRequire libnl3
- Do not strip binaries, fix -debuginfo packages.

- fix bashisms in pre script

- Rename rpmlintrc to %{name}-rpmlintrc.
  Follow the packaging guidelines.

- updated to latest upstream version 1.2.12
  + Fix reallocation issue introduced in last merge.
  + Fix some minor memory leaks.
  + Better libnl support and selection.
  + VRRP unicast TTL fix.
  + Support to newer libnl.
  + More IPv6 support.
  + Fix/extend VRRP gratuitous ARP handling.
  + Support xmit VRRP packets from base VMAC interface.
  + VRRP multicast group tweaking.
  + Fixed VRRP socket sync while leaving FAULT state.
  + Code cleanup and cosmetics.

- Add cyrus-sasl for old distros

- Update to version 1.2.9:
  + Extended VRRP code for faster sync and transition.
  + Fixed VRRP unicast code to support routed packet.
  + Fixed VRRP checksum computation.
  + Extended VRRP code tweaking IPv6 VIP install by disabling DAD algo and setting deprecated flag.
  + Fixed some issues in checker framework while processing hysteresis.
  + Extended checker framework to support use of status_code and digest at a time.
- Changes from version 1.2.8:
  + Add support for VRRP unicast.
  + Add support for VRRP IPv6 routes.
  + Add support to LVS One-Packet Scheduling.
  + Add CLI core framework.
  + Misc bugfixes, typo and cosmetics.
- Drop keepalived_man_fix.patch: merged upstream

- initial package of 1.2.7