keepalived-1.4.1-bp150.2.3

- Only Require insserv on distributions without systemd.
- Fix systemd related requires/buildRequires
- Do not run scriptlets that use insserv when using systemd

- add linux-4.15.patch

- update to 1.4.1:
  * Improve and fix use of getopt_long().
    We musn't use a long option val of 1, since getopt_long() can return
    that value.
    getopt_long() also returns longindex == 0 when there is no matching
    long option, and there needs to be careful checking if there is an
    error to work out whether a long or short option was used, which is
    needed for meaningful error messages.
  * Write assert() messages to syslog.
    assert()s are nasty things, but at least let's get the benefit of
    them, and write the messages to syslog, rather than losing them down
    stderr.
  * Enable sorry server at startup if quorum down due to alpha mode
    If alpha mode is configured on sufficient checkers so that a
    virtual server doesn't have a quorum, we need to add the sorry
    server at startup, otherwise it won't be added until a quorum has
    been achieved and subsequently lost again. In the case where some
    of the checkers remain in the down state at startup, this would have
    meant that the sorry server never got added.
  * For virtual servers, ensure quorum <= number of real servers
    If the quorum were gigher than the number of real servers, the
    quorum for the real server to come up could never be achieved, so
    if the quorum is greater than the number of real servers, reduce it
    to the number of real servers.
  * Fix some SNMP keepalived checker integer types and default values.
    Some virtual server and real server values were being sent to SNMP
    with a signed type whereas the value is unsigned, so set the type
    field correctly.
    Some virtual server and real server values that apply to checkers
    are set to nonsense default values in order to determine if a
    value has been specified. Handle these values when reporting them
    to SNMP replying with 0 rather than a nonsense value.
  * Fix some MALLOC/FREE issues with notify FIFOs.
  * Add instance_name/config_id to alert emails' subjects if configured.
    If multiple instances of keepalived are running, either different
    instance_names and/or config_ids, it is useful to know which
    keepalived instance the email relates to.
  * Ensure that email body string isn't unterminated.
    Using strncpy() needs to ensure that there is a nul termination byte,
    so this commits adds always writing a nul byte to the end of the buffer.
  * Remove duplicate fault notification.
  * Fix problem with scripts found via PATH with a '/' in parameters.
    Recent discussions on issue #101 led to discovering that if an
    executable without a fully qualified name was specified as a script
    and there was a '/' character in the parameters, then the path
    resolution would not work.
  * Send SNMP traps when go from backup to fault due to sync group.
    Commit 020a9ab added executing notify_fault for vrrp instances
    transitioning from backup to fault state due to another instance
    in the sync group going to fault state. This commit adds sending
    SNMP traps in the same circumstance.
  * Revert "Add instance_name/config_id to alert emails' subjects if
    configured". This should be handled by setting router_id
  * Add config option to send smtp-alerts to file rather than send emails
    This is useful for debugging purposes.
  * Add additional entry to Travis-CI build matrix.
  * Fix segfault if no sorry server configured for a virtual server.

- enable json stats and config dump support
  new BR: pkgconfig(json-c)
- disable dynamic loading of libipset and link it instead
- enable stacktrace support
- turn on snmp-rfcv2 and snmp-rfcv3 support
- do not reference the keepalived.socket in the rpm scriptlets

- update to 1.4.0
  * Add Linux build and runtime versions to -v output.
  * Log kernel version and build kernel version to log at startup.
  * Don't sleep for 1 send when exiting vrrp process if no vrrp instances.
  * With large configurations the syslog can get flooded and drop output.
    This commit adds options to not log to syslog, and also to log all
    output to files.
  * Add option to only flush log files before forking.
  * Don't poll netlink for all interfaces each time add a VMAC.
    We can poll for the individual interface details which significantly
    reduces what we have to process.
  * Print interface details in keepalived.data output.
  * Add high performace child finder code.
    The code to find the relevant thread to execute afer a child process
    (either a vrrp track script or a misc_check healthchecker) was doing
    a linear search for the matching pid, which if there are a large number
    of child processes running could become time consuming.
    The code now will enable high performance child finding, based on using
    mlists hashed by the pid, if there are 32 or more vrrp track scripts or
    misc check healthcheckers. The size of the mlist is based on the number
    of scripts, with a limit of 256.
  * Improve high performance child termination timeout code.
  * Preserve filename in script path name resolution.
    Some executables change their behaviour depending on the name by
    which they are invoked (e.g. /usr/sbin/pidof when it is a link to
    /usr/sbin/killall5). Using realpath() changes the file name part
    if it is a symbolic link. This commit resolves all symbolic links
    to directories, but leaves the file name part unaltered. It then
    checks the security of both the path to the link and the path to
    the real file.
  * Handle scripts names that are symbolic links properly.
  * Fix some RFC SNMP issues.
  * Fix removing left-over addresses if keepalived aborts.
  * Update openssl use to stop using deprecated functions
    openssl from version 1.1 deprecated certain functions that keepalived
    was using. This commit ceases using those functions if the version
    of openssl is >= 1.1.
  * Allow sync groups with only 1 member, but issue a warning.
  * Add replaceable parameters in configuration files.
  * Add multiline configuration definitions.
  * Fix keepalived.conf(5) man page.
  * Suppress error message when removing leftover addresses at startup.
  => find more changes at /usr/share/doc/packages/keepalived/
- rebase keepalive-init.patch
- use upstream systemd service file instead providing an own one
  => removed keepalived.service
- remove executable bit from samples in docdir
- check that LVS support is enabled
- optionally enable dump configuration and stats as JSON (via bcond)
  => BuildRequire libjson-c-devel
- restrict /etc/keepalived permissions to root

- Do not suppress errors from useradd.
- Ensure neutrality of description.

- update to 1.3.9:
  Revert using github tarball and use original source again.
  Too many fixes and features to list, refer to
  /usr/share/doc/packages/keepalived/ChangeLog for a detailed list.

- Replace references to /var/adm/fillup-templates with new
  %_fillupdir macro (boo#1069468)

- use tarball from https://github.com/acassen/keepalived/issues/524
  the original tarball did not build. This has the necessary fix
  applied. for the 1.3.4 update see the TODO entry in the preamble.

- update to 1.3.3
  Some minor fix, extensions and updates. snapcraft support. Refer
  to /usr/share/doc/packages/keepalived/ChangeLog for more infos.

- fix building with libnfnetlink. the additional include path needs
  to be in CPPFLAGS instead of CFLAGS now.
- enabled a few more features:
  - enhanced snmp support (V2/V3 RFC)
  - make sure we build with ipset/libiptc and routes support
- prepared dbus support: waiting for boo#1015141

- update 1.3.2
  - Security focused on notify heplers. Some minor fix and
    extensions.
  - changes from 1.3.1
  - Quick script fix for regression brought by last release.
  - changes from 1.3.0
  - New MAJOR release with stabilization fixes. Support to DBus.
    Conf extensions. Parser error log. Security extensions to run
    scripts more secure.
  - changes from 1.2.24
  - MAJOR release with stabilization fixes and new features like
    support to network namespace.
  Refer to /usr/share/doc/packages/keepalived/ChangeLog
  for more infos.

- update to 1.2.23
  Some VRRP fixes. Some Healthcheckers fixes.
  Refer to ChangeLog for more infos.

- update to 1.2.22
  Some VRRP fixes. Refer to ChangeLog for more infos.
- update to 1.2.21
  Some fixes for last major release 1.2.20. Extensions on vrrp
  framework. Refer to ChangeLog for more infos.
- update to 1.2.20
  BUNCH of extensions, fixes, cleanup & production considerations.
  Distro packages maintainers are strongly encouraged to upgrade.
- new BR libnfnetlink-devel
- we no longer ship the VRRP-MIB

- enhanced keepalive-init.patch :
  + replace tabs with spaces
  + read /etc/sysconfig/keepalived, if exists and use the settings
    there instead of the default KEEPALIVED_OPTIONS in case the
    user changed them

- use package name buildrequires on sle11 to fix building

- enable snmp for better monitoring
- enable sha1 support

- Update to version 1.2.19:
  + vrrp: fix checksum computation in vrrp v2 for socket family
    AF_INET.
  + Some cosmetics at Makefile stuff.
- Changes from version 1.2.18:
  + some cosmetics changes (in memory and parser).
  + remove dead/not used code.
  + revert notify script brought by last release.
  + revert VRRP preemption speed up extension.
  + vrrp: ix vrrp removes incorrect IPv4 address when VIPs are
    removed.
  + vrrp: Re-enable VRRPv2 checksum on inbound pkts.
- Changes from version 1.2.17:
  + zalloc use xalloc for consistency.
  + memory: fix wrong size calculation in zfree.
  + Fix keepalived snmp configuration.
  + Change comments to match kernel style.
  + smtp: Fix wrong algorithm in RCPT-TO building.
  + Lots of vrrp fixes.
- Changes from version 1.2.16:
  + Properly close netlink channel to avoid fd leak.
  + Use getaddrinfo instead of gethostbyname to workaround glibc
    gethostbyname function buffer overflow (boo#949238).
  + Lots of ipvs fixes.

- no longer install the init script on systemd systems

- Update to version 1.2.15:
  + Bugfixes.
- Changes from version 1.2.14:
  + VRRP bugfixes and extensions. IPVS bugfixes and code code
    cleanup.
- Changes from version 1.2.13:
  + VRRP fixes and extensions. Extrend and unify checker
    framework.

- Build with -DOPENSSL_NO_SSL_INTERN, if package starts accessing
  the SSL library internals it must fail to build now, in upcoming
  openSSL versions structures are opaque.
- BuildRequire libnl3
- Do not strip binaries, fix -debuginfo packages.

- fix bashisms in pre script

- Rename rpmlintrc to %{name}-rpmlintrc.
  Follow the packaging guidelines.

- updated to latest upstream version 1.2.12
  + Fix reallocation issue introduced in last merge.
  + Fix some minor memory leaks.
  + Better libnl support and selection.
  + VRRP unicast TTL fix.
  + Support to newer libnl.
  + More IPv6 support.
  + Fix/extend VRRP gratuitous ARP handling.
  + Support xmit VRRP packets from base VMAC interface.
  + VRRP multicast group tweaking.
  + Fixed VRRP socket sync while leaving FAULT state.
  + Code cleanup and cosmetics.

- Add cyrus-sasl for old distros

- Update to version 1.2.9:
  + Extended VRRP code for faster sync and transition.
  + Fixed VRRP unicast code to support routed packet.
  + Fixed VRRP checksum computation.
  + Extended VRRP code tweaking IPv6 VIP install by disabling DAD algo and setting deprecated flag.
  + Fixed some issues in checker framework while processing hysteresis.
  + Extended checker framework to support use of status_code and digest at a time.
- Changes from version 1.2.8:
  + Add support for VRRP unicast.
  + Add support for VRRP IPv6 routes.
  + Add support to LVS One-Packet Scheduling.
  + Add CLI core framework.
  + Misc bugfixes, typo and cosmetics.
- Drop keepalived_man_fix.patch: merged upstream

- initial package of 1.2.7