fprintd-1.94.2-bp155.2.3.1

- add all supported USB devices as Supplements

- Do not recommend lang package: the lang package has smarter
  supplements in place.

- Update to version 1.94.2
  * EnrollStart will throw an error if the finger was enrolled already
  * Interactive DBus authentication will only happen when requested
  * Add PAM module options to ignore timeout/retry limits
  * A lot of translation updates after the POT file was fixed
  * Improve meson build file and fix building with meson 0.61.0
    So patches can be dropped
    f4256533d1ffdc203c3f8c6ee42e8dcde470a93f.patch
    2c34cef5ef2004d8479475db5523c572eb409a6b.patch

- Add upstream bug fix patches, fix build with meson 0.60.x and
  newer:
  + f4256533d1ffdc203c3f8c6ee42e8dcde470a93f.patch
  + 2c34cef5ef2004d8479475db5523c572eb409a6b.patch

- Fix for openSUSE Leap 15.3, makro %{_pam_moduledir} is unknown in
  openSUSE Leap 15.3

- Few minor spec-cleaner tweaks

- Fix the download url

- Update to version 1.94.1
  * Highlights:
    + Fix systemd unit so that udev hotplug events are processed
    + Report back the selected finger if there is only one
    + Change PolicyKit strings for clarity
    + Various fixes to the testsuite
    + Plenty of translation updates
- Changes from 1.94.0
  * Highlights:
    + Implement suspend/resume handling.
    + This requires writing "power/persist" and "power/wakeup" in sysfs.
    + Support libfprint overheat protections
    + Delete host prints when device prints disappeared
    + pam: Immediately return success information
    + Plenty of updated translations thanks to move to Fedora Weblate
    + Fix possible race when retrieving session information
    + Fix possible race when a client disconnects
    + GLib 2.56 compatibility fixes
- Changes from 1.92.0
  * Highlights:
    + fprintd now prevents the same finger to be enrolled twice
    + Support clearing storage of match-on-chip devices
    + pam: Cancel authentication on SIGINT (e.g. ctrl+c with sudo)
    + pam: Always return PAM_AUTHINFO_UNAVAIL for devices without prints
    + Expose finger status on DBus
    + Add method to delete only a specific print of a user
    + Improved error reporting for deletion
    + Wait for finger removal before cancelling operations
    + Prefer older prints when garbage collecting
    + Major improvements to test coverage
- Remove README.SUSE because rh#1693356 and upstream classified it as not a problem

- fix pyton dbus-python build dependency for Leap 15.3 boo#1183818

- Update to version 1.90.9
  * Fix multiple daemon lockup issues (#97)
  * Fix print garbage collection to not delete used prints
  * pam: Use the device with the most prints

- Update to version 1.90.8
  It seems that we are finally reaching the end of the tunnel with
  regard to regressions. One more issue that cropped up was that a
  pam_fprintd fix to avoid a possible authentication bypass caused
  issues when fprintd was just started on demand.
  Highlights:
  * pam: Only listen to NameOwnerChanged after fprintd is known to
    run.
  * Place new ObjectManager DBus API at /net/reactivated/Fprint

- Update to version 1.90.7
  While 1.90.6 fixed a number of issues, we did have a bad
  regression due causing pam_fprintd to crash when there are no
  fingerprint devices installed.
  Highlights:
  * pam: Guard strdup calls against NULL pointers

- Update to version 1.90.6
  The 1.90.5 release was unusable due to a number of inter-related
  issues with the DBus interface and authorization. We also found
  a number of problems with possible security implications.
  Currently fprintd will do interactive authorization even if this
  was not requested using the correct DBus method call flag. All
  API users MUST be updated to set the flag as it will be enabled
  in the future!
  Highlights:
  * Fix fprintd DBus configuration
  * Change details of what requires authorization
  * Fix various race conditions in pam_fprintd
  * Permit interactive authorization from fprintd utilities
  * Do not allow deletion while another operation is ongoing
- Drop patch:
  * 0001-tests-Fix-test-not-failing-on-error.patch

- Update to version 1.90.4
  The 1.90.4 release caused a major regression, as it included a
  USB hub in UDEV the autosupend rule list.
  Highlights:
  * Remove USB hub from udev autosupend rules
  * synaptics: Add PID 0x00c9 which is used in some HP laptops

- Update to version 1.90.4
  * Authentication is now required to enroll a new print.
  * Add support for the libfprint early reporting mechanism
  * Proper hotplug support together with libfprint 1.90.4
  * Handle STATE_DIRECTORY containing multiple paths
- Add patch:
  * 0001-tests-Fix-test-not-failing-on-error.patch
    https://gitlab.freedesktop.org/libfprint/fprintd/-/merge_requests/70
    Unittest test_manager_get_devices_on_name_appeared is broken
    with this patch applied - so revert it for now.

- Few minor spec-cleaner tweaks

- Update version to 1.90.1
  * Add support for prints saved on the fingerprint device itself
  * Add integration tests using the virtual image driver, and further tests for the utilities
  * Port build system to meson
  * Loads of build warnings and memory leak fixes
  * PAM module:
    Port PAM module to sd-bus from dbus-glib
    Use systemd to not ask for a fingerprint scan on remote logins
    Add man page for PAM module
    Add tests
- Split doc package

- Fix the download url

- update to 0.9.0:
  * Fix hangs when there the verification error was "retry"
  * Update for fp_get_pollfds() changes
  * Fix "client_username" memory leak, fix memory leak when saving a file
  * Create the fingerprint storage directory at install time, the storage path is now hard-coded as /var/lib/fprint and created by systemd when the service is started

- Add README.SUSE to warn users of the potential risk in storing
  fingerprint data on their systems

- Update to version 0.8.1:
  + Fix build when builddir != srcdir.
  + Fix possible crash on exit.
  + Avoid warnings in copy/paste header.
  + Sandbox fprintd daemon more.
  + Update website address.
  + Minimise debug output.
  + Updated translations.
- Run spec-cleaner, modernize spec.
- Drop _service file, upstream have moved to gitlab and are using
  a unique Url for tarball source so service no longer makes sense.

- Update to version 0.8.0
  * Lockdown the daemon to minimise potential security issues
  * Don't wake up readers when there's no enrolled fingerprints

- Update to version 0.7.0
  * Fix crash in the daemon when cancelling PAM conversation
  * Fix build warnings and update translations

- Update to version 0.6.0:
  + Fix warning in fprintd.pod file.
  + Reduce logging during normal operation.
  + Fix eventfd leak in PAM module.
  + List possible values for finger when enrolling.
  + Fix possible crash in fprintd-verify.
  + Fix listing and deleting fingerprints when there's more than
    one reader available.
- Drop fprintd.pod-syntax.patch: fixed upstream.

- fix bashism in postun script

- added baselibs.conf as source to specfile

- drop rpmlintrc

- added baselibs.conf

- activate obsoletes for pam_fprint as yast2-fingerprint-reader
  (which this was waiting for) has been dropped half a year ago

- Change systemd BuildRequires to pkgconfig(systemd) so that
  configure actually finds the dependency. This fixes an issue on
  systemd-based systems where the fprintd dbus service is not
  starting because it's referencing the non-existing fprintd
  systemd service. Fix bnc#850807.
- Add %pre/%post/%preun/%postun sections to register systemd
  service.
- Add %{?systemd_requires} to the dependencies.

- Update to version 0.5.1
  + Add support for 147e:2020 to upeke2 driver
  + Fix possible race condition, and cancellation in uru4000 driver
  + Add Microsoft keyboard to the suspend blacklist
  + Plenty of build fixes
- Changes from version 0.5.0:
  + New VFS300/VFS301 driver
  + New AES2550/AES2810 drivers
  + New AES1660 driver
  + New AES2660 driver
  + New DigitalPersona URU4500 driver
  + Avoid empty capture and improve image contrast in the AES2501 and AES2550 drivers
  + Update upektc driver, add support for Eikon Touch 300
  + Fix UrU4000 image capture on ARM
  + Fix power control path for newer kernels
  + Move udev rules to the correct directory
  + Don't print duplicated udev rules
  + Include udev rules in the tarball
  + Allow disabling of udev rules for cross-compiling
  + Add driver names in the generated rules
- Adhere to http://spdx.org/licenses/ guidelines
- Fixed self-obsoletion RPMlint warnings
- Added openSUSE license reminder to spec file
- Added fprintd.pod-syntax.patch to fix a syntax error during build.

- Update to version 0.4.1:
  + Enable gtk-doc by default so that file aren't missing in the
    tarball
- Changes from version 0.4.0:
  + Loads of new translations
  + Fix crasher when PAM module gets unloaded
  + Use GIO to monitor D-Bus clients instead of custom code
- Add lang_package
- Obsolete pam_fprint <= 0.2 (not provided, it's not a pure
  drop-in replacement).
- Rework the BuildRequires to reflect as closely as possible what
  configure looks for.

- initial package for openSUSE, based on Fedora package

- Update to 0.2.0

- Remove use of g_error(), or people think that it crashes when we actually

- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild

- Make the -devel package noarch (#507698)

- Merge polkit patch and fix for polkit patch

- Fix the pam module (#510152)

- Remove obsolete patch

- Port to PolicyKit 1