ffado-2.4.3-bp155.2.17

- Update to release 2.4.3

- Replace pkgconfig(libxml++-2.6) with pkgconfig(libxml++-3.0)
  BuildRequires.

- Update to release 2.4.1
- Removed uneeded and incorporated patches:
  libffado-SConstruct-py3.patch, ffado-gcc6.patch and byteswap.patch
- Upstream changes:
  * Fix some python syntax which was not compatible with python3.
  These were missed during the preparation of FFADO 2.4.0.
  * Modify the SCons build system to allow for scons running under
  python3.
  * Merge distribution patches provided by package maintainers.
  * Address some difficulties experienced by package maintainers
  when compiling FFADO.
  * Improve the output of ffado-diag.

- byteswap.patch: ensure byte swap macros are available for all components

- Add reproducible.patch to always build with SSE2,
  independent of build system CPU (boo#1100677)

- Update to release 2.4.0 and fix build against glibc-2.27
  see boo#1079938.
- Removed patches fixed upstream:
  ffado_SConstruct_powerpc_update.patch and sigev.patch.
- Rebased libffado-SConstruct-py3.patch partially fixed upstream.
- Added ffado-nosys.patch for missing import sys in SConstruct.
- Rebased ffado-gcc6.patch, partially fixed upstream.
- Upstream changes:
  * Numerous build system and code improvements to support
  architectures such as MIPS, x32 and various PowerPC flavours.
  * A large number of fixes for newer versions of gcc
  (particularly versions 6 and 7).
  * Initial support for the optional TCO module of the
  RME Fireface-800.
  * Expanded ffado-mixer support for the Phase88 device.
  * Initial work to make ffado-mixer compatible with
  python3/pyqt5.
  * Start work towards compatibility with scons3.

- Extend libffado-SConstruct-py3.patch: convert more of the build
  tools to python3. This allows us not to pull a different version
  of python into buildroot than is not already used by SCons.

- Added conditional for libffado-SConstruct-py3.patch to only apply
  if scons built with python 3.

- Fix building with python3 scons, add libffado-SConstruct-py3.patch

- sigev.patch: add missing header to define SIGEV_THREAD

- Modify libffado-date_time.patch to allow reproducible builds.

- Update to 2.3.0
- Fix gcc7 errors with -fpermissive see boo#1030245
- Removed obsolete udev macro definition
- Rebased ffado_SConstruct_powerpc_update.patch and
  ffado-gcc6.patch
- Duplicated %build scons statement in %install to prevent a
  complete rebuild of the package.
- Upstream changes:
  * Configuration entries added for additional devices which work
  with the generic support layer (PreSonus Studiolive 32.4.2,
  Presonus StudioLive 16.0.2, ICON FireXon, Onyx Blackbird and
  the new Onyx 1640i, among others).
  * Support added for the newer Focusrite Saffire Pro 26.
  * Improved build support for various downstream consumers.
  * Better routing for selected Saffire devices and the Firestudio
  Mobile.
  * Significant cleanup and refinement of the M-Audio and Yamaha
  driver.
  * Compilation fixes for recent versions of gcc.
  * Recover from dead streams without causing jackd to shut down.

- Use pkgconfig buildrequires where available and cleanup spec file.

- Add --std=gnu++11 to EXTRA_FLAGS.

- Replace libxmll++-devel BuildRequires with
  pkgconfig(libxml++-2.6) in order to be ready for the
  compatibility package introduction (libxml++ goes 3.0).

- Add ffado-gcc6.patch to move #include <math.h> outside of a namespace
  and to not declare errno as local variable.

- SConstruct is_powerpc and is_64bit to support ppc64le
  with new ffado_SConstruct_powerpc_update.patch

- Install udev rule to the correct directory by removing the incorrect
  redefinition of %_udevrulesdir. It is defined already in
  systemd-rpm-macros which is preinstalled in OBS. (boo#911303)

- Update to bugfix version 2.2.1
- Fixes compilation failures when DEBUG=no is specified
- Upstream changes for 2.2.0:
  * Many bugs fixed
    Mixer, router and monitor support for Saffire Pro 14
    Mixer and router support for Presonus Firestudio Tube,
    Presonus Firestudio Project, and M-Audio Profire 2626
    Support Echo Audio AudioFire12 with firmware versions 5.0 and
    later (addresses ticket 360)
    Echo Audio device mixer additions:
    hide SPDIF mode switch on AudioFire12
    digital interface switch on AudioFire8 and Pre8
    phantom power switch for AudioFire4 (addresses ticket 364)
    playback routing for AudioFire2/4 (addresses ticket 335)
  * Presonus device mixer additions:
    better support the FP10 (formerly known as the Firepod)
    implement support for the Firebox and Inspire1394
  * M-Audio mixer additions:
    improve support for the Ozonic
    add support for Firewire Solo (ticket 336), Audiophile, 410, 1814
    and ProjectMix I/O
  * Device-specific mixer for Yamaha GO44 and GO46 interfaces added
  * RME Fireface 400/800 improvements:
    mixer and device settings can now be saved to and restored from
    device flash clock source selection made more consistent
  * DICE EAP / RME Matrix mixer enhancements:
    "per output" view with mono/stereo control saving of mixer
    settings to file
    more consistent cooperation with jackd when sample rate is changed
  * Audio streaming support added or refined for additional MOTU
  interfaces:
    Traveller mk 3
    Ultralite mk 3
    Ultralite hybrid (using firewire interface only)
    4pre
- Known issues:
  * Saffire Pro 40 at 96 kHz fails to start most of the time
  (ticket 326)
  * Saffire Pro 24 and Pro 40 MIDI problems (tickets 372 and 375)
  * Saffire Pro 24 and Pro 40 lack an ADAT/SPDIF switch
  * Only mixer control is supported on M-Audio 1814 and M-Audio,
  ProjectMix
  * M-Audio Audiophile, 410 and 1814 require startup workaround.
  See http://sourceforge.net/p/ffado/mailman/message/30807938
  * M-Audio Audiophile, 410 and 1814 will only work with FFADO when
  loaded with the latest firmware

- own /usr/lib/udev directory to avoid buildrequiring udev

- Move udev rules to /usr/lib/udev for openSUSE 12.3 or later.

- Update to 2.1.0 version:
  * Significantly improved support for the new "juju" firewire stack
    found in newer kernels
  * Support for JACK freewheeling mode and set-buffer-size operation
  * Lower CPU usage
  * udev rules included in FFADO to give user access to audio device files
  * More stable streaming
  * Fix crash when realtime system clock was set
  * Fix race conditions and invalid memory accesses on shutdown
  * Fixes for clean compilation on recent gcc versions (up to 4.7)
  * ffado-diag enhanced to aid debugging efforts
  * Many bugs fixed
- Remove patchs merged on upstream release:
  * ffado-gcc47.patch
  * libffado-bswap.patch
- Do not use and include ChangeLog in the package because the svn repo is down
  and this file could not be update
- Remove useless conditional macros

- fix ppc64 build

- Add ffado-gcc47.patch: Fix build with gcc 4.7.

- Added "Recommends: ffado-mixer" to the ffado rpm.

- Update to ffado-svn revision 2040 to fix bnc#747391 & bnc#736115
- Upstream changes, see /usr/share/doc/packages/ffado/ChangeLog