debhelper-9.20150101-bp153.1.16

- fix perl compatibility for Leap (bsc#1228955)

- fix initialization of state variables problem (bsc#1215078)
  added debhelper-fix-perl-version-requirement.patch

- update to 13.11.5:
  * Update Portuguese translation (Américo Monteiro)
    (Closes: #1028159)
  * Update on German translation of pages (Closes: #1028564)
  * Fix minor typo in DEB_BUILD_OPTIONS warning ("and but not" -> "but not")
  * AddonAPI.pm: Correct method name in error message.
    Thanks to wferi@Github
  * dh_missing: Update link to PROGRAMMING.md.gz
  * cmake.pm: set -DBUILD_TESTING=OFF for nocheck builds
  * autoscripts/postinst-init-tmpfiles: do not output to /dev/null to not hide error messages
  * cmake.pm, meson.pm: Set DEB_PYTHON_INSTALL_LAYOUT=deb if not already set
    (Closes: #1043136)
  * buildsystems: Give XDG_RUNTIME_DIR spec-compliant u=rwx,og-rwx permissions
  * meson.pm: Disable Python byte-compilation if the Meson version is new enough
    (Closes: #1042398)

- update to 13.11.4:
  * meson.pm: Pass --destdir to `meson install`.  (Closes: #1027014)
  * Dh_Lib.pm: Have addsubstvars check the value for newlines (Closes: #1026014)
  * Stop using (fake)root for mkdirs again.
    Should have been removed as a part of the clean up in the previous
    upload but was overlooked causing breakage in packages still having
    `Rules-Requires-Root: binary-targets`. (Closes: #1026125)
  * PROGRAMMING.md: Fix typos
  * Dh_Lib.pm: Remove unused third parameter from install_dh_config_file
  * makefile.pm: Provide hook for subclasses to reuse cross-build support
  * Dh_Lib.pm: Revert change where `install_{file,prog,lib}` would use chown.
    The problem that prompted this change was not caused by debhelper but
    by fakeroot (#1024544) and the change in debhelper would not even
    function as a work around in this case.  Accordingly, the extra
    complexity is not worth it and has been reverted.
  * Dh_Lib.pm: Fix typo in warning message about dherroron

- Update to version 13.11.1
  * dh_installchangelogs: Ensure that at least four old entries are preserved
    (Closes: #1021467)
  * meson.pm: Use `meson setup` in the configure step rather than just `meson`.
  * Put newest compat level first in documentation
  * Rename debhelper config files to include package name
  * dh_installdebconf: Fix typo in manual page
  * Dh_Lib.pm: `qx_cmd` support env/chdir changes like `doit` (Closes: #1016354)
  * Remove obsolete compat checks in the code
  * dh_dwz: Ensure dwz multifile is owned by root:root when root should be used
  * dh_builddeb: Always pass `--root-owner-group` to `dpkg-deb` for dbgsym packages.
  * Dh_Lib.pm: Provide `mkdirs` to create (non-package) directories.
  * Dh_Lib.pm: Make `install_dir` chown created directories when root should be
    used for debhelper's own commands.  This fixes #1024261 for packages that only
    use debhelper itself. However, third-party debhelper tools may still cause
    packages with incorrect ownership for now if they are run after `dh_fixperms`
    (or `dh_fixperms` is omitted).
  * Dh_Lib.pm: Ensure `install_{file,prog,lib}` uses chown when root should be used.
    Previously, they would skip the `chown` call and rely on `dh_fixperms`
    or `dpkg-deb` to fix the ownership.  However, that could cause issues
    when the helper was run after `dh_fixperms` and install files that
    `dpkg-deb` would not reset ownership of.
  * Install `installsysusers` sequence (to match the provide).
  * dh_installchangelogs: Trim old Debian changelog entries
    automatically.  Distributions can disable this by using
    `DEB_BUILD_OPTIONS=notrimdch`.
  * dh_installchangelogs.t: Force locale to be `C.UTF-8` to
    avoid generating invalid changelog entries under
    non-default locales.
  * meson.pm: Stop providing `MESON_TESTTHREADS` environment
    variable for the install target.  Said variable only
    applies for testing.
  * cmake.pm: Use `cmake --install` in compat 14.
    (Closes: #1020732)
  * docs/PROGRAMMING{,.md}: Rewrite PROGRAMMING into markdown.
  * dh_installsystemduser: Stop masking user units on package
    removal.  They should never have been masked in the first
    place.  See #1021027.
  * dh_installinit: Remove executable bit of init scripts on
    package removal (via preinst).  Related to #1021027.
  * dh_installsystemd: Stop masking system units on package
    removal.  This is no longer necessary with the init scripts
    getting their exec bit cleared on package removal.
    (Closes: #1021027)
  * Dh_Lib.pm: Add `package_type` as a function (extracted
    from `is_udeb`).
  * Dh_Getopt.pm: Fix duplicated `warning` in output for a
    particular warning.
  * dh_assistant: Provide a new `detect-hook-targets` command.
  * dh: Recommend using `dh_assistant detect-hook-targets` for
    checking whether hook targets are correct.
  * dh: Hoist `nodoc` and `nocheck` from `DEB_BUILD_PROFILES`
    into `DEB_BUILD_OPTIONS` when they are present in the former
    and absent in the latter.  Emit a warning when doing so to
    aid the user, so they know why this does not work when they
    are later building a package that does not use dh.
    (Closes: #979401)
  * dh: Provide a warning when cross building an `nocheck` is
    absent from `DEB_BUILD_OPTIONS` to cross builders, who are
    not experienced with Debian's requirements for
    cross-building.  The warning also recommends activating the
    `cross` build profile and provides a way to disable the
    warning without using `nocheck` (for the special case, where
    people have a system that can run host binaries).
  * Dh_Lib.pm: Fix bug where `addsubstvars` would not respect
    the `--no-act` parameter.
  * dh_perl: For scripts that are detected as perl scripts
    that would trigger a dependency, normalize the shebang line to
    use the same perl as debhelper is run under (/usr/bin/perl
    in Debian, YMMV in derivatives).  (Closes: #904409)
  * dh_assistant: Provide new `log-installed-files` command to
    help users and third-party tools record which files they have
    installed.  Third-party tools should use the
    `--on-behalf-of-cmd` to have their tool name recorded.
    (Closes: #972724)
  * dh_installexamples: Explicitly recommend `examples/*` over
    `examples` as content for the `debian/<pkg>.examples` file
    to avoid the triggering `.../examples/examples` case.
    (Closes: #1000384)
  * debhelper.pod: Clarify the documentation around `-v` +
    `--verbose` vs. `DH_VERBOSE` vs. `DH_QUIET` and `terse`
    from `DEB_BUILD_OPTIONS`.  Notably, clarify that `-v`
    and `DH_VERBOSE` provides the same functionality and
    that they do not cause *all* commands to be shown.
    (Closes: #1002464)
  * Update Portuguese translation (Américo Monteiro)
    (Closes: #1019231)
  * autoscripts/postinst-init-tmpfiles: Re-instate runtime check
    before running `systemd-tmpfiles`. However, explicitly check
    for `systemd-tmpfiles` rather than asserting the system was
    booted by systemd. This resolves #1013969 without requiring
    a strict dependency as originally suggested by Guilhem Moulin
    in #1013969.
  * dh_installtmpfiles: Remove the `systemd | systemd-tmpfiles`
    dependency as it is no longer required.  (Closes: #1017441)
  * dh_installsystemd: Ditto.
  * dh_installinit: Ditto.
  * autoscripts/postinst-init-tmpfiles: Only pass `--root` to systemd
    when `DPKG_ROOT` is present (as `--root=/` is different from
    omitting `--root` entirely).
  * autoscripts/postinst-sysusers: Ditto

- Update to version 13.9
  * d/control: Provide dh-sequence-installsysusers.
  * debhelper.pod: Add missing word "variables".
  * Dh_Lib.pm: Fix in addsubstvar where a value was added when
    it should not have been.  (Closes: #1015263)

- Update to version 13.8
  * dh_perl: Fix incorrect binary versioning caused by a regression
    in 13.3.  Thanks to Niko Tyni for reporting the issue.
    (Closes: #997961)
  * d/control: Bump Standards-Version to 4.6.1 - no changes required.
  * root_sequence.pm: Run `dh_installsysusers` before
    `dh_installtmpfiles` (only affects compat 14 or later).  Thanks
    to Nicholas Brown for the suggestion.  (Closes: #1011099)
  * autoscripts/postinst-init-tmpfiles: Remove runtime check on the
    system having systemd as init system.
  * dh_installtmpfiles: Replace runtime check on the system running
    under systemd in generated `postinst` script with a dependency
    on `systemd | systemd-tmpfiles` added to `${misc:Depends}`.
    Thanks to Guilhem Moulin for the suggestion.  (Closes: #1013969)
  * dh_installsystemd: Ditto.
  * dh_installinit: Ditto.
  * debhelper-compat-upgrade-checklist.pod: Correct description for
    the addition of dh_installsysusers in compat 14.
  * meson.pm: Use `meson install` instead of `ninja install` for
    dh_auto_install in compat 14.  Thanks to Andrea Pappacoda for
    the suggestion.  (Closes: #1006805)
  * Dh_Lib.pm: Remove double semi-colon.  (Closes: #1010591)
  * Dh_Lib.pm: _strip_spaces now explicitly returns undef on undef
    argument.
    (Closes: #1010594)
  * cmake.pm: Set FETCHCONTENT_FULLY_DISCONNECTED to true.  This
    ensures that the `FetchContent` module does not attempt to
    use internet connection.
  * debhelper-compat-upgrade-checklist.pod: Update documentation
    for compat 14 change.  (Closes: #1011404)
  * debhelper.pod: Correct link to the new upgrade checklist.
    (Closes: #1012777)
  * dh_installman: Avoid false positive language detection on
    shared libs.
  * Update Portuguese translation (Américo Monteiro)
    (Closes: #1011256)

- Update to version 13.7.1
  * debhelper.pod: Fix several typos.  Thanks to Guillem Jover
    for pointing them out and proposing corrections.
  * dh_installalternatives: Correct a file check that caused
    false-positive rejections of valid alternatives files.  Thanks to
    Hiroyuki YAMAMORI for reporting the bug and providing an initial
    patch.  (Closes: #1009844)

- Update to version 13.7
  * dh_installalternatives: Improve validation of alternative files to
    catch some "obvious" copy-waste mistakes.
  * dh: Invoke dh_installalternatives after dh_link in compat 14 or
    later. Thanks to Colin Watson for the suggestion.
    (Closes: #1002800)
  * cmake.pm: Drop -DCMAKE_SKIP_RPATH=on in compat v14.  Thanks to
    Vagrant Cascadian for the suggestion and the investigative work on
    this topic.  (Closes: #1004939)
  * debhelper-compat-upgrade-checklist.pod: New file.
  * debhelper.pod: Move list of supported compat levels and the related
    upgrade checklist into debhelper-compat-upgrade-checklist.pod.
    This means you now need `man 7 debhelper-compat-upgrade-checklist`
    to see the upgrade checklist.
  * dh_installdebconf: Support -D/--define command line parameters
    (mirroring those from dh_installdeb).
  * Dh_Lib.pm: Cope with "?=" as assignment operator in substvars files
    to be future proof with (possible) planned addition of "optional
    substvars.  At the moment, debhelper will still always use "=" when
    adding a substvar but it will now preserve "?=" operator if an
    existing substvar is modified.
  * autoconf.pm: Add support for autotest test suites by passing the
    TESTSUITEFLAGS environment variable to `make test`.
  * Rewrite handling of stop services to use the `preinst` when using
  - -no-restart-after-upgrade.  This fixes a regression caused by
    the fix for #989155.  (Closes: #994204)
  * dh_installmenu: Respect DPKG_ROOT when checking for update-menus.
    Note this implementation assumes update-menus is present both
    inside and outside the chroot to activate.  If it is absent on
    either side, the update-menus call is skipped.
  * dh_installsysusers: Invoke systemd-sysusers even when DPKG_ROOT
    is set (relying on `--root`).
  * dh_installpam: In compat 14, install pam snippets into
    `/usr/lib/pam.d` instead of `/etc/pam.d`.  Remember to remove
    (now) obsolete conffiles when you bump to compat 14.
  * debhelper.pod: Correct spelling of DEB_BUILD_MAINT_OPTIONS.

- Update to version 13.6
  * dh_assistant: Avoid creating `debian/.debhelper` when the
    which-build-system sub command is invoked.  Thanks to
    Jelmer Vernooij for spotting that bug.
  * dh_assistant: Add new active-compat-level command, which
    outputs information about which compat level is declared
    and active.  It also tells how the compat level was
    declared.
  * Dh_Lib.pm: Add new function, get_non_binnmu_date_epoch,
    only needed for dh_strip_nondeterminism.
  * dh_installcron: Add support for `cron.yearly` packaging
    file.  Thanks to Martin-Éric Racine for the suggestion.
    (Closes: #1000363)
  * Dh_Lib.pm: Remove support for compat 5 and 6.
  * debhelper.pod,debhelper-obsolete-compat.pod: Update to
    reflect the new status for compat 5 and 6.
  * dh: Add missing _ in execute_after example in POD.
  * dh_compress: Exclude .woff and .woff2 by default.
  * Update Portuguese translation (Américo Monteiro)
    (Closes: #1000719)

- Update to version 9.20150101
- Adapt debhelper-no-localized-manpages.patch to upstream changes
  * debhelper-9.20150101-no-localized-manpages.patch
- Remove upstreamed debhelper-findutils.patch

- import upstream patch debhelper-findutils.patch from Git
  * Avoid find -perm +mode breakage caused by findutils 4.5.11,
  by instead using -perm /mode (deb#700200)

- update to debhelper-9.20120830
  * dh_installcatalogs: Turn /etc/sgml/$package.cat into conffiles
  and introduce dependency on trigger-based sgml-base. Closes: #477751
  * dh: When there's an -indep override target without -arch, or vice versa,
  avoid acting on packages covered by the override target when running
  the command for packages not covered by it. Closes: #676462

- fix Provides for package split, there is no /usr/bin/debhelper
- fix wrong perl require on Fedora

- refresh debhelper-pod2man-no-utf8.patch to allow build
  on SLE 11 SP2

- package debhelper separately

- update to dpkg-1.16.3
  * see http://packages.debian.org/changelogs/pool/main/d/dpkg/dpkg_1.16.3/changelog
- update to debhelper 9.20120518
  * Fix versioned dependency on dpkg for xz options. Closes: #672895
  * dh_link: Doc improvement. Closes: #672988
- update to devscripts-2.11.7
  * see http://packages.debian.org/changelogs/pool/main/d/devscripts/devscripts_2.11.7/changelog
- reworked patch. remove version for archtable. for it's universal.
- add dh_make 0.60
  * see http://packages.debian.org/changelogs/pool/main/d/dh-make/dh-make_0.60/changelog
- add dh_autoreconf 6
  * see http://packages.debian.org/changelogs/pool/main/d/dh-autoreconf/dh-autoreconf_6/changelog

- install missing parts of devscripts
  * install man pages installed by debian/manpages
  * install symlinks installed by debian/links

- update to dpkg-1.15.8.12
  * Do not fail to unpack shared directories missing on the file system
  from packages being replaced by other packages. Debian Bug #631808
  * Defer hardlink renames so that there's never a point were the new
  file contents are accessible from the final path before they have
  been fsync()ed and cannot be executed causing ETXTBSY when trying
  to open the to be installed paths for writing. Debian Bug #635683
  * Add armhf support to ostable and triplettable.
  Debian Bugs #594179, #639674

- remove call to suse_update_config (very old work around)

- update to dpkg-1.15.8.11
  * Do not segfault on "dpkg -i --no-act".
  * Fix typo in "dpkg-name --overwrite" argument parsing so that it actually
  works at all. Ubuntu Bug #728708
  * Fix dpkg-split to not corrupt binary part metadata when generating the
  split packages on 32-bit systems.
  * Fix a regression in dpkg-divert where using --rename led to a failure when
  the rename implies crossing file systems.

- Remove redundant tags/sections from specfile
  (cf. packaging guidelines)
- Use %_smp_mflags for parallel build

- Merge openSUSE:Tools changes with system:packagemanager changes

- split the u-a to separate spec file to reduce a build cycle

- update to dpkg-1.15.8.10
- update to debhelper-7.5.17
- update to devscripts-2.10.71
- see /usr/share/doc/packages/deb/*/changelog for details
- build and install update-alternatives as separate subpackage
- add download urls to source tags
- remove pushd/popd madness in %prep, use only one cd ..
- convert sed archtable hackery to patch and refresh patches
- rewrite a architecture mugging in config.h to be more readable

- fix build on old distros

- install missing debhelper files
  - install dh
  - install Debian/Debhelper/Buildsystem/*.pm

- make 'debcommit -r' work with mercurial 1.6

- update to dpkg-1.15.6.1
- update to debhelper-7.4.17
- update to devscripts-2.10.62
  - see /usr/share/doc/packages/deb/*/changelog for details
- split deb-devel subpackage

- update to dpkg-1.15.5.6
- update to debhelper-7.4.15
- update to devscripts-2.10.61
  - see /usr/share/doc/packages/deb/*/changelog for details

- Update to version 13.5.2
  * dh_installsystemd: Revert change to deploy systemd files into
    usr/lib/systemd.  (Closes: #993316, #993759)
  * dh_installinit: Ditto.
  * dh_systemd_enable: Ditto.
  * dh_systemd_start: Ditto.
  * SequencerUtil.pm: Remove duplicate "-a" option to some commands.
    Thanks to Christoph Berg for reporting the issue.
    (Closes: #971761)
  * dh_installdeb: Revert the change to rewrite `rm_conffiles` into
    `remove-on-upgrade` due to it causing bugs in non-trivial cases.
    (Closes: #994919)
  * dh_installtmpfiles: Add missing option name in POD documentation.
  * cmake.pm: make it possible to override dh provided ctest arguments
  * cmake.pm: Add missing import which broke cmake related builds.
    Thanks to Boyuan Yang for reporting the issue.
    (Closes: #993345)
  * dh_installdeb: Install debian/conffiles in compat 12+ again
    (undoing the compat 12 change saying dh_installdeb would ignore
    this file).  The file can now be using for the activating the
    `remove-on-upgrade` feature from dpkg 1.20.
  * dh_installdeb: Automatically rewrite `rm_conffiles` into the
    new `remove-on-upgrade` feature from dpkg when possible.
  * cmake.pm: Pass `ARGS+=--verbose` to make when running tests
    in the cmake+make variant except when "terse" is in
    DEB_BUILD_OPTIONS.  Thanks to Paul Wise for the suggestion.
    (Closes: #992623)
  * python_support.pm: Remove obsolete dh addon.  It did nothing
    but warn and nothing used it anymore.
  * dh: Document debhelper provided dh addon sequences.
  * single_binary.pm: New dh addon ("single-binary") that explicitly
    activates the "single binary" work flow, where dh_auto_install
    uses debian/<pkg> as default --destdir when there is only a
    single binary package.  It will error out if used in a
    source package building multiple binary packages.
  * dh: Activate "single-binary" addon by default in compat levels
    up to and including compat 14 when the source package only lists
    one binary package in debian/control.  In compat 14, emit a warning
    when this happens implicitly requesting users to explicitly enable
    or disable the addon for single binary source packages to avoid
    surprises in compat 15.
  * dh_auto_install: In compat 15, remove special-case default for
  - -destdir for single binary source packages.  If the previous
    default is desired, please use the "single-binary" dh addon or
    explicitly pass --destdir to dh_auto_install.
    (Closes: #971432)
  * debian/control: Provide dh-sequence-single-binary.
  * debhelper.pod: Document the dh_auto_install will change behaviour
    in compat 15 for single binary packages and dh will warning about
    that in compat 14.
  * dh_assistant: New tool for assisting third-party tools.  At the
    moment, it primarily supports introspection related features but
    will hopefully be extended to support more use cases.
    (Closes: #984900)

- Update to version 13.4.1
  * autoscripts/*: Replace `which` with `command -v`.
  * dh_installsystemd: Only merge /lib/systemd/system into /usr
    for now.  (Closes: #992554)
  * dh_systemd_enable: Ditto.
  * autoscripts/postinst-init-nostart: Call invoke-rc.d when
    a non-empty DPKG_ROOT is used.  (Closes: #992556)
  * Replace "use v5.28" with "use v5.24" in Dh_Lib.pm.
    The change to "use v5.28" in 13.4 broke the test to distinguish 0755
    from "0755" in the reset_perm_and_owner function, breaking builds.
    Thanks Adrian Bunk and Ansgar for help isolating the problem.
  * debian/changelog: Correct bug number in the 13.4 entry.
  * dh_dwz: run in parallel across packages.  (Closes: !47)
  * Dh_Buildsystems.pm: Add bmake and mkcmake as third-party
    build systems.  (Closes: !46)
  * Dh_Buildsystems.pm: Add golang as a third-party build
    system.  (Closes: #981106)
  * autoscripts/*: Add support for DPKG_ROOT in systemd, tmpusers,
    sysusers and init related snippets.  Based on an initial patch
    from Helmut Grohne.  (Closes: #983566)
  * autoscripts/*: Reorder conditions in some scripts to avoid
    doing a redundant stat call when a script parameter can decide
    to skip it.
  * dh_gconf: Remove the command as it does nothing.
    (Closes: #908845)
  * doc/TODO: Remove reference to dh_gconf.
  * root_sequence.pm: Remove dh_gconf from root sequence and declare
    it as obsolete (causing errors from compat 14 if still referenced
    in hook targets).
  * man/po4a/po4a.cfg: Remove dh_gconf from translations.
  * AddonAPI.pm: The declare_command_obsolete command now accepts an
    "$error_compat" parameter to enable addons to choose which compat
    level that will trigger an error (though it must be minimum 13).
  * doc/PROGRAMMING: Update docs to reflect API change.
  * debhelper.pod: Document that referencing dh_gconf in hook targets
    will cause an error in compat 14.
  * dh_fixperms: Correct permissions of files beneath usr/libexec to
    be executable.  (Closes: #979401)
  * dh_installtmpfiles: Only register tmpfiles ending with ".conf" as
    tmpfiles in /usr/lib/tmpfiles.d and /etc/tmpfiles.d.  This ensures
    that dh_installtmpfiles gracefully copes with e.g. README files
    provided by systemd upstream.  (Closes: #986329)
  * dh_installsystemd: Ditto (but only relevant in compat 12 or
    earlier)
  * cmake.pm: Pass -DCMAKE_FIND_USE_PACKAGE_REGISTRY=OFF to cmake in
    addition to -DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON as the
    former is intended to replace the latter.  Thanks to Raul Tambre
    for reporting the issue.  (Closes: #988973)
  * Dh_Lib.pm: Bump version requirement to v5.28 to reflect the actual
    requirements (the code was using v5.28 features).  Thanks to
    Sérgio Basto for reporting the issue.
  * dh_missing: Ditto.
  * autoscripts/postinst-init,autoscripts/postinst-systemd-start: Use
    "restart" instead of "start" when starting the services.  This
    ensures a smooth transition from --restart-after-upgrade to
  - -no-restart-after-upgrade in dh_installinit and dh_installsystemd.
    Thanks to Ryan Tandy for reporting the issue.
    (Closes: #989155)
  * dh_installsystemd: Remove usage of autoscripts/postinst-systemd-restart
  * dh_installinit: Remove usage of autoscripts/postinst-init-restart
  * autoscripts/autoscripts/postinst-systemd-restart: Removed.
  * autoscripts/postinst-init-restart: Removed
  * dh_installsystemd: Prefer /usr/lib/systemd/ to /lib/systemd.
    (Closes: #987989)
  * dh_systemd_enable: Ditto.
  * dh_systemd_start: Ditto.
  * dh_installinit: Ditto.
  * dh_installsystemd: Merge /lib/systemd into /usr/lib/systemd if both
    are present in the package staging directory (prefering the latter
    in case of conflicts).  (Closes: #987989)
  * dh_systemd_enable: Ditto.
  * perl_build.pm,perl_makemaker.pm: Make debhelper use the same perl
    as it runs under (via Perl's $^X variable) when invoking the
    upstream build system.  (Closes: !40, #966396)
  * Always generate unique doc-base file names based on package name and
    document ID. (Closes: #980903)

- Update to version 13.3.4
- Adapt patches to new upstream version:
  * remove debhelper-9.20150101-no-localized-manpages.patch
  * add debhelper-no-localized-manpages.patch

- Update to version 9.20160709

- fix build on old distros