Package Release Info

collectl-4.1.3-bp150.3.3.1

Update Info: openSUSE-2019-590
Available in Package Hub : 15 Update

platforms

AArch64
ppc64le
s390x
x86-64

subpackages

collectl

Change Logs

Version: 4.1.3-2.1
* Tue Apr 11 2017 tabraham@suse.com
- include colmux
- Update to 4.1.3
  + correct use of uninitialized variable on output of distro info
    on openSUSE
* Fri Mar 03 2017 tabraham@suse.com
- Update to 4.1.2
  + incorrectly requiring a + with --rawdskfilt to be at beginning
  + when added support for 64bit IB counters it looks like I was only
    saving 3 of the 4 values (loop only went to 3 instead of 4)
    around line 4403. [thanks seb]
- Changes from 4.1.1
  + added packet loss and fast restransmissions to TCP Extended versbose
    output and renamed AkNoPy and PreAck to PurAck and HPAcks to be
    consistent with earlier versions [thanks Sophie]
  + add support for nvme disks [thanks fred]
  + it turns out some people re-enable lustre support for the sake of
    monitoring clients and to support that I had to add a check for
    the lustre-client module which is now in a differetn location than
    others [thanks fred]
* Tue Oct 11 2016 tabraham@suse.com
- Update to 4.1.0
  + allow lexpr to pass formatting information for strings and numbers
    [thanks Guy]
  + modify the way misc.ph reports uptime to thousandths of a day [thanks, seb]
  + added OPA interface support for -sx reporting and cleaned up some very
    old code, like quadrics support! [thanks fred]
* Thu Jul 14 2016 tabraham@suse.com
- Update to 4.0.5
  + rawdskfilt has been enhanced to allow a preceding + which will
    cause the following string to be appended to the default filter
  + needed to initialized anonH for numa stats [thanks andy]
  + added 'hed' to known ethernet devices, used by HP Helion
* Wed May 04 2016 tabraham@suse.com
- Update to 4.0.4
  + if you try to playback a file with --stats and it has recorded
    processes or slabs, ignore them be removing from $subsys
  + playback of process data with -P was not skipping first interval and so
    stats for first entry we not rates but rather raw numbers
  + change 'yikes' message to something more meaningful
  + fixed problem with -sZ -P printing all 0s for thread count
  + added /usr/lib/systemd/system/collectl.service, per sourceforge help
    discussion on 2015-12-28
  + added disk read/write wait timing for disk detail in terminal, plot
    and lexpr format
  + new switch dskremap allows one to change disk names on the fly because
    in some cases such as etherd disks, the names are messy for use with
    other tools like ganlia
  + removed access to disk name remapping file
  + the rawdskfilt has been enhanced to allow a preceding + which will
    cause the following string to be appended to the default filter
- Changes from 4.0.3
  + add AnonHuge memory to memory stats, both verbose and detailed as
    well as lexpr
  + if lexpr called with --import, throw an error
  + tighten divide-by-zero test for -sM because it looks like in some cases
    when misses >0 we're getting occasional errors.  could hits be somehow
    negative?
* Thu May 28 2015 tabraham@suse.com
- Update to 4.0.2
  * add /bin/bash to list of 'known shells' excluded from output with
  - -procopt k
  * generalize ethernet network device name to include ALL names
    matching type 'p\dp' so we pick up p2p, p3p, p4p... [thanks Matt]
  * collect nr_shmem so we can track shared memory, apparently something
    I thought of but never acted on [thanks Christian]
  * do not include guest cpu metrics in totals since already accounted
    for in user time
* Mon Apr 20 2015 mpluskal@suse.com
- Update to 4.0.0
  * for a complete list of changes see RELEASE-collectl
- Cleanup spec-file with spec-cleaner
- Use url for source
- Fix broken rcservice symlink
- Add ommited systemd service pre macro
* Wed Sep 24 2014 tabraham@suse.com
- Update to version 3.7.4
  See RELEASE-collectl for changes
* Thu Dec 12 2013 p.drouand@gmail.com
- Update to version 3.6.9
  + Typo in network plot header loop resulted in infinite loop
  + remove $int/secs from numa hit rate calc AND add more precision
    to its output
- Changes from 3.6.8
  + new flag $exportComm must be set in gexpr/ganglia so that they won't
    generate an error if run without -f or -A
  + new switch: --intfilt allows filtering of interrupts
  + always log messages of type F/E to syslog in daemon mode even if
  - m is not set
  + wasn't dealing correctly with missing whitespace after network name in
    /proc/dev/net in initRecord()
  + updated init.d script for suse per the maintainer's instructions
  + extra spaces were being printed in plot mode for tpc stats
  + added entry to envrules.std to deal with intel Phi Co-Processor
  + debian init.d script now does 'exit 1' if status reports 'not running'
  + rawnetignore switch wasn't working correctly
  + found/fixed some subtle problems with --procanalyze as well as some cleanup
  - need to ignore first sample after initializing summary arrays
  - need to init summary hashes for thrutime and accumT because get uninit var
    in print routine is only a single process entry
  - found a typo in procAnalyze() to a $usecs which wasn't being used!
  - added error check to make sure --procanalyze with -P requires -s
  + added a little more debugging output for -d128
  + discovered dynamic disk/network detail names for interactive mode were not
    being reported correctly.  sounds a lot worse than it is because this is
    typically not done very often nor are disks/networks very dynamic except in
    large, virtualized environments such as clouds
  + add to list of devices to exlude from network summary data: tap, dp and nl,
    which are associated with openstack cinder.  remember you can always add
    more to that list with --netfilt
  + $lastHour was never referenced and dayInit() called every time a log was
    created so fix logic to update $lastHour correctly AND call initDay() one
    time and do it before newLog() called.
  + closed a couple of file handles that were left open and reportedly
    causing some defunct processes with -sx.
  + fixed bug in lustre stats recording
  + clarified --showsubopts text about disk and network filters in that they
    apply to both summary and detail data output
  + fixed problem with --import and --stats
  + --statsopt a didn't work because when changed some internal logic missed
    changing a test of $timestampFlag to $timestampCounter[$rawPFlag] and so
    now $timestampCount can be removed entirely
  + clear $firstpass after 1st pass during playback
  + make sure filename initialized before calling loadConfig so if there is
    an error logsys() doesn't get an undefined var warning
  + to be safe, remove any quotes on net/dsk filters in case included by
    mistake in DaemonCommands string
  + tightened up tests to see if daemonized collectl already running
  + if no hiRes::Time, fudge the value of $microInterval based on -i
  + new --procOpt k, removes known shells from process listing with -sZ,
    currently set to /bin.sh, /usr/bin/perl, /usr/bin/python and python
  + fixed varname in lexpr: $debug should have been $lexDebug
- Remove init-cleanup.patch; merged on upstream release
* Sat Oct 26 2013 p.drouand@gmail.com
- Drop sysvinit support; none of target distributions use sysvinit
  anymore
- Add systemd support
- Install collectl in /usr/bin to get it launchable with systemd and
  link it in /usr/sbin
- Add a sysconfig file
* Thu Jun 06 2013 tabraham@suse.com
- deleted bug-793027.patch : deprecated
- init-cleanup.patch : init script cleanup
- see RELEASE-collectl for list of changes between 3.4.3 and 3.6.7
* Tue Mar 05 2013 coolo@suse.com
- update license to new format
* Wed Dec 05 2012 tabraham@suse.com
- bug-793027.patch: fix for collectl init script (bnc #793027)
* Sun Sep 18 2011 jengelh@medozas.de
- Remove redundant tags/sections from specfile
* Fri Nov 05 2010 hvogel@novell.com
- Update to version 3.4.3
  * when errors detected during initialization not skipping subsequent checks
  * added --dskfilt
  * added check for client-side OST uuid status 'DEACTIVATED'
  * support for CPUs dynamically changing stats and going off/on-line
  * new feature: select process by UID range
  * do not issue 'stty' if !PC, running on terminal and !background.
  * added --netfilt
  * changed disk details to use 'cvt()' for reporting number of I/Os since DM
    numbers
  * 2 new process sort fields: pid and cpu
  * only look at $cpuDisabledFlag when processing CPU data
* Tue Apr 06 2010 hvogel@novell.com
- Update to version 3.4.1
  * new switch --umask for setting mode to files collectl creates
  * support for Fusion-IO disks
  * Support for OFED 1.5
  * Improved performance of playback
  * Added LSB headers to all start scripts
  * New data collection/reporting API
  * New export: gexpr, for exporting data to ganglia
  * Added NFS V4 support and collection
  * Expanded contents of verbose memory output
  * Added Power to environmental monitoring
  * Allow multiple clients to connect when is server mode
  * Added fields to --top for monitoring slabs
  * Expanded --top functionality.
  * Enhanced MDS stats to support lustre 1.6.5
  * Added --grep switch to allow searching/reporting data in raw files
  * A couple of switch names changed to be more consistent
  * Improved help
* Thu Jul 03 2008 hvogel@suse.de
- Initial package, Version 2.6.4
Version: 4.1.3-6.1
* Wed Aug 29 2018 glin@suse.com
- Specify the type of service as "forking" (boo#1106366)
- Remove the execution bit from collectl.service
- Create the collectl directory in /var/log
Version: 4.1.3-bp150.2.3
* Wed Apr 11 2018 mpluskal@suse.com
- Cleanup spec file with spec-cleaner
- Use correct systemd build dependency
- Reduce duplicities in package via fdupes
* Thu Nov 23 2017 rbrown@suse.com
- Replace references to /var/adm/fillup-templates with new
  %_fillupdir macro (boo#1069468)