calamares-3.2.36-bp153.1.11

- Update to version 3.2.36.
  * It is now possible to hide the *next* and *back* buttons during
    the "exec" phase of installation. Thanks Anubhav.
  * The Calamares CI has migrated to GitHub actions. Thanks Jonas.
  * *bootloader* now uses the current file names for the UEFI Secure
    Boot shim instead of obsolete ones.
  * The *mount* module creates swap in its own subvolume, if btrfs
    is used.
  * *partition* includes more information about what it will do,
    including GPT partition types (in human-readable format, if
    possible).
  * Some edge-cases with overlay filesystems have been resolved in
    the *partition* module.
  * During the creation of filesystems and partitions, automounting
    is turned off (if DBus is available, and the host system supports
    KDE Solid automount control). This should reduce the number of
    failed installations if automount grabs partitions while they
    are being created. The code is prepared to handle other ways
    to control automount-behavior as well.

- Update to version 3.2.35.1:
  * The partition module now supports a not-full-disk-encryption setup,
    where /boot is not encrypted, but the rest of the system is.
  * Fixed issue then the initcpiocfg module would sometimes configure
    the system to ask for a passphrase, when none is needed.
  * The plasmalnf module has been substantially rewritten, so that
    it can support a QML version of the module in future. The UI has
    changed a little, and now displays more themes than before.
- Add patch 3.2-networkcfg.patch to prevent writing
    /etc/resolv.conf as a regular file – let openSUSE to create it as
    a symlink automatically.
- Set default source directory to "/run/overlay/rootfsbase" as
    it is with Kiwi from 9.21.18 (in older Kiwi was "/run/rootfsbase").
    See https://github.com/OSInside/kiwi/issues/1558

- Add compatibility with qml-autoreqprov

- Update to version 3.2.34.
  * Modules
  * The *keyboard* module had a regression in which it no-longer
    painted the keycaps in the keyboard preview.
  * The *plasmalnf* module did not set all of the look-and-feel
    values in the target system. (reported by Bluestar Linux)
  * In the *users* module, warnings about the strength of the
    password are now correctly pluralized when possible.
  * In the *users* module, if ICU is installed, the user's full
    name is automatically transliterated to US-ASCII
    (for some locales; this will need tweaking) so that the login
    name is acceptable.
- Rebase 3.2.15-unpackfs.conf_Leap15.patch
- Fix spec file, license file move to LICENSES/GPL-3.0-or-later.txt

- Split -lang package

- calamares.keyring updated (gh#calamares/calamares#1450)
- Changed 3.2-packages.conf.patch: updated for new version
- Update to version 3.2.27:
  - locale put some more places into the correct timezone visually;
  for instance Norfolk Island gave up UTC+11.5 in 2015 and is now
  UTC+11, but Calamares still showed it in a zone separate from UTC+11.
  - localeq can now properly switch between on & offline mode,
  it detects internet status through js.
  - tracking now supports kuserfeedback configuration.
  - welcomeq added the GEOIP configuration option, so locale can be
  initially set according to IP address.
  - Welcome to Azerbaijani translations. These are available
  in two variations, Azerbaijani and Azerbaijani (Azerbaijan).
  - Warnings while building with Qt 5.15 have been much reduced.
  - partitioning has one case of undefined behavior (UB) due
  to a missing integer-initialization.
  - keyboardq QML module now works correctly.
  - QML modules with no surrounding navigation -- this is basically a
  special case for full-screen Calamares -- now have margins suitable
  for full-screen use.
  - PythonQt modules are increasingly on the way out.
  - The netinstall module has had some minor UI tweaks.
  - Partitioning now tries harder to avoid floppy drives.

- Update to version 3.2.25:
  - Slideshow improvements
  - Welcome QML module is now pretty much complete.
- Removed Qt515_QPainterPath.patch: contained in upstream

- Add patch Qt515_QPainterPath.patch to add missing includes
  (QPainterPath) for Qt 5.15 compatibility.

- Correct license

- Update generic branding.

- Added keyring and added SOURCE.asc
- Patch updates
- Update to version 3.2.24:
  - Lots of fixes and additions since 3.2.15:
  - https://calamares.io/calamares-3.2.16-is-out/
  - https://calamares.io/calamares-3.2.17-is-out/
  - https://calamares.io/calamares-3.2.18-is-out/
  - https://calamares.io/calamares-3.2.19-is-out/
  - https://calamares.io/calamares-3.2.20-is-out/
  - https://calamares.io/calamares-3.2.21-is-out/
  - https://calamares.io/calamares-3.2.22-is-out/
  - https://calamares.io/calamares-3.2.23-is-out/
  - https://calamares.io/calamares-3.2.24-is-out/

- Requires kde-cli-tools5 instead of /usr/bin/kdesu,
  because OBS KIWI solver does not understand file requirements.

- Fix spec file license year string

- Use kdesu to start Calamares:
  - xdg-su may autoselect gnomesu which fails (boo#1164072);
  - pkexec may have theme issues.

- Exclude /etc/dracut.conf.d/02-livecd.conf from copying into
  filesystem, otherwise installation may fail with with
  "Failed to run dracut on the target" error (boo#1159739)

- Launch with "pkexec calamares" in openSUSE Tumbleweed, but
  launch with "xdg-su -c calamares" in openSUSE Leap 15.

- Update 3.2-packages.conf.patch to try remove "dracut-kiwi-live"
  package after installation.

- Update to Calamares 3.2.15:
  - "displaymanager" module now treats "sysconfig" as a regular
    entry in the "displaymanagers" list, and the "sysconfigSetup"
    key is used as a shorthand to force only that entry in the
    list.
  - "machineid" module has been re-written in C++ and extended
    with a new configuration key to generate urandom pool data.
  - "unpackfs" now supports a special "sourcefs" value of file
    for copying single files (optionally with renaming) or
    directory trees to the target system.
  - "unpackfs" now support an "exclude" and "excludeFile" setting
    for excluding particular files or patters from unpacking.
- Remove patch 3.2-fix-autologin-config-via-sysconfig.patch
  that included in Calamares 3.2.15 upstream.
- Update 3.2.14-unpackfs.conf_Leap15.patch and rename it to
  3.2.15-unpackfs.conf_Leap15.patch
- Update 3.2.14-configuring_autologin_in_sysconfig.patch and
  rename it to 3.2.15-configuring_autologin_in_sysconfig.patch

- Add upstream patch 3.2-fix-autologin-config-via-sysconfig.patch
  to fix regression while configuring autologin in openSUSE
  (see https://github.com/calamares/calamares/issues/1253).

- Update to Calamares 3.2.14:
  - "locale" module no longer recognizes the legacy GeoIP
    configuration. This has been deprecated since Calamares 3.2.8
    and is now removed.
  - "packagechooser" module can now be custom-labeled in the overall
    progress (left-hand column).
  - "displaymanager" module now recognizes KDE Plasma 5.17.
  - "displaymanager" module now can handle Wayland sessions and can
    detect sessions from their .desktop files.
  - "unpackfs" now has special handling for sourcefs setting “file”.
- Add "-DBoost_NO_BOOST_CMAKE=ON" option to workaround bug in
  Cmake compatibility with boost >= 1.70 (see bnc#1152377
  https://github.com/calamares/calamares/issues/1242
  https://github.com/calamares/calamares/issues/1251 and
  https://gitlab.kitware.com/cmake/cmake/issues/18865)
- Update 3.1.4-unpackfs.conf_Leap15.patch and rename it to
  3.2.14-unpackfs.conf_Leap15.patch
- Update 3.1.2-configuring_autologin_in_sysconfig.patch and
  rename it to 3.2.14-configuring_autologin_in_sysconfig.patch

- Update to Calamares 3.2.13. More about upstream changes:
  https://calamares.io/calamares-3.2.13-is-out/ and
  https://calamares.io/calamares-3.2.12-is-out/

- Update to Calamares 3.2.11:
  - Fix race condition in modules/luksbootkeyfile/main.py
    (bnc#1140256, CVE-2019-13178)
  - more about upstream changes in 3.2 versions can be found in
    https://calamares.io/ and
    https://github.com/calamares/calamares/releases
  - drop 2.4-services.conf.patch
  - update 2.4-bootloader.conf.patch and rename it to
    3.2-bootloader.conf.patch
  - update 3.1.11-packages.conf.patch and rename it to
    3.2-packages.conf.patch
  - update 3.0-settings.conf.patch and rename it to
    3.2-settings.conf.patch
  - update 2.4-removeuser.conf.patch and rename it to
    3.2-removeuser.conf.patch
  - update 3.1.1-welcome.conf.patch and rename it to
    3.2-welcome.conf.patch
  - update 3.1-show.qml.patch and rename it to
    3.2-show.qml.patch
  - Minimum Qt version is Qt 5.7, thus removed support for
    openSUSE Leap 42.x
  - drop 3.1.4-unpackfs.conf.patch that used for openSUSE Leap 42.x

- use suse_version macro instead of sle_version to make effects
  on openSUSE Tumbleweed.

- Add patch 3.1.4-unpackfs.conf_Leap15.patch to reflect changed
  path to LiveOS read-only filesystem in KIWI-ng (KIWI 9)
  (bnc#1124451).
- BuildRequires libboost_python3-devel for Leap 15.0 and newer
  instead of boost-devel (bnc#1124423, upstream issue 817).

- Fix building for openSUSE Leap 42.3 by switching to GCC7.

- Update to Calamares 3.1.11:
  - fix bug then some poorly-configured systems cannot reliably set
    the hardware clock (RTC). Previously this was an error which
    would abort the entire installation. Calamares now ignores the
    error.
  - 3.1.4-packages.conf.patch updated and renamed as
    3.1.11-packages.conf.patch

- Update to Calamares 3.1.10:
  - fix bug then Python job-modules could not use pretty_name() for
    reporting the module status when the job was started.
  - The packages module can now be enabled, but then skipped if
    no internet is available (this is a preferred configuration for
    distro's which would like to install packages, but which are
    optional when there is no connection).

- Update to Calamares 3.1.9:
  - Fix bug in Netinstall corner cases: a hidden subgroup would be
    installed even when its parent was not selected, and a hidden
    subgroup could cause its parent to default to unselected.
  - The branding element ProductLogo is used as the logo, instead
    of the product icon.

- Update to Calamares 3.1.8:
  - Fix Netinstall crash if the returned netinstall-groups
    data was empty.
  - Fix regression were GeoIP data had been read twice.
  - Use more support code from KPMCore, instead of doing it
    ourselves.

- Update to Calamares 3.1.7 fixes two regressions introduced
  earlier in the 3.1 series (3.1.5 or before):
  - Netinstall was no longer compatible with the packages module,
    which prevented any users of netinstall from installing
    packages from online repositories.
  - The bootloader installation for EFI systems used the wrong
    name for the bootx64.efi (or bootia32.efi) files.

- Update to Calamares 3.1.6:
  - fixes two regressions introduced in 3.1.5
  - improving timezone selection in northern locations.

- Remove -devel subpackage: libraries are not intended to be used
  by other programs.
- Fix Python shebang in main.py files.

- Merge calamares and calamares-libs3 into one RPM package:
  Calamares' developers don't guarantee stable API or ABI,
  libraries are not intended to be used by other programs.

- Update to Calamares 3.1.5:
  - Python 3.4 is once again supported.
  - Improved reporting of dependencies in CMake.
  - Dozens of compilation warnings fixed up.

- Update to Calamares 3.1.4:
  - A race condition leading to crashes when starting Calamares
    has been resolved.
  - Packages module has been seriously revamped; it is now also
    translatable.
  - Translations in the partitioning module have been improved.
  - Encrypted swap is now correctly configured.
  - Minor visual improvements.

- Updated to Calamares 3.1.4 pre-release git version b22bd67:
  - Fix partitioning regressions in Calamares 3.1.2/3.1.3.
  - Drop calamares_crash_reporter.

- Drop 2.4-QT5.5-compat.patch: openSUSE Leap 42.1 no longer supported.
- Drop 3.1-users.conf.patch: no longer need to dissable autologin.

- Don't build calamares_crash_reporter for openSUSE Tumbleweed,
  otherwise entire building fails.

- Updated to Calamares 3.1.3:
  - Python jobs without a pretty_name() function ? and that is the
    majority of them ? could no longer be run.
  - The installation-is-done notification could hang Calamares when
    the installation failed.
- Update 2.4-unpackfs.conf.patch and rename it to
  3.1.3-unpackfs.conf.patch

- Updated to Calamares 3.1.2:
  - Translation updates.
  - Summary page now shows language and number-formats information.
  - The Quit and Done buttons now have a tooltip explaining what
    they will do.
  - At the end of the install process, a notification appears in
    the system notification area (generally a pop-up in the lower
    right-hand corner of the screen).
  - If installation fails, the system won?t reboot automatically on
    the last Calamares page.
  - Fat32 filesystems are now handled correctly even when misspelled.
  - Filesystem sizes are now shown with an MB suffix.
- Modify 3.1.2-SUSE_DM_-_add_special_case_configuring_autologin_in_sysconfig.patch
  and rename it to 3.1.2-configuring_autologin_in_sysconfig.patch

- Backport upstream patch to enable autologin configurations
  3.1.2-SUSE_DM_-_add_special_case_configuring_autologin_in_sysconfig.patch

- Updated to Calamares 3.1.1:
  - Improved salting for user passwords.
  - Crash on startup when no installation-devices are found has
    been fixed.
  - Support for very small screens (800x600) is improved.
  - Hostnames may be up to 63 characters in length, conforming to
    RFC1123 and various LDAP schemas.
  - System language, locale settings and keyboard are now guessed
    based on installer language and location.
  - Crashreporter added to release tarball.

- Provide branding package separately.

- Updated to Calamares 3.1.0.
  Upstream changes between Calamares 3.0.1 and 3.1.0:
  - improved package selection user interface;
  - support for disabling swap partition creation in automated
    partitioning;
  - double-click as a way to edit a partition in the manual
    partitioning view;
  - improved check for internet connection availability;
  - improved package manager handling, so a package operation which
    fails for a single package won?t block other packages;
  - various minor fixes.
  Upstream changes between Calamares 3.0.0 and 3.0.1:
  - fix for an issue in the users module, which could break login
    if the chosen password had non-Latin1 characters;
  - proper exception handling in the networkcfg module;
  - improved autologin configuration handling for sddm.
  Upstream changes between Calamares 2.4.6 and 3.0.0:
  - new optional PythonQt-based module interface.
  - dropped support for KPMcore 2;
  - countless fixes and improvements.

- Updated to Calamares 2.4.6:
  - fixed autologin handling for sddm in the displaymanager module;
  - improved build system files so module linkage defaults to
    private;
  - fixed an issue which caused the internet connection status to
    not be written to GlobalStorage;
  - added support for building the partition module with both
    KPMcore 2.2 and 3.0;
  - fixed a crash on startup in the webview module (if built with
    QtWebEngine);
  - fixed an issue in the partition module which could sometimes
    cause the legacy bootloader to be installed on the wrong disk;
  - fixed an issue in the users module to correctly disable the
    root password if configured to do so;
  - fixed an issue in the partition module to always set the
    correct flags for an EFI system partition.

- Updated to Calamares 2.4.5:
  - fixed a path handling issue which could sometimes occur when
    reusing an existing EFI system partition;
  - fixes and reliability improvements for the internet connection
    check in the welcome module;
  - fixed GRUB deployment with 32-bit UEFI firmware (note: this
    also affects some 64-bit systems which ship a 32-bit UEFI
    firmware);
  - fixed operating system detection for automatic dual boot setup
    in GRUB;
  - added Btrfs subvolumes setup for @ and @home in automated
    install modes (note: manual partitioning still doesn?t support
    Btrfs subvolumes, as this requires further work in both KPMcore
    and Calamares);
  - fixed a security issue which could happen when using manual
    partitioning to set up a system with an encrypted root
    partition, but with an unencrypted separate /boot partition.