brickv-2.4.25-bp156.1.1

- Update to new upstream version 2.4.25
  - Fix Python dev-mode default handling
  - Do not touch /usr/lib/python3/dist-packages on Debian Linux
  - Convert Debian Linux package build to debhelper
  - Disable ADC calibration for 7p Bricks
  - Add missing pkg_resources dependency on Linux
  - Update all temperature readings with 10 Hz
  - Stop callback emulator from delivering results to destroyed plugins
  - Avoid crash while loading the 3D model in all IMU plugins
  - Avoid PyQt5 import problem with the Qt module
  - Fix accidental dependency on newer PyQt5 version on Linux

- Update to new upstream version 2.4.23
  - Allow saving config when Modbus master timeout is changed for RS485 Bricklet
  - Enable Python development mode when running from source
  - Fix socket leak on connect error
  - Add manual y-axis scaling for plot widget
  - Remove all driver files for Windows 7 and earlier
  - Fix calibration dialog title for Compass Bricklet plugin
  - Fix Galileo satellite numbers for GPS Bricklet 3.0
  - Add support for IPv6 connections
  - Add commandline options to specify host, port and secret
  - Add tab select menu that stays in the top left corner
  - Fix corner cases in IMU Brick(let) plugin untab handling
  - Add manual firmware list update button if auto-search for updates is disabled
  - remove upstream patch 0001-red-Handle-service-provider-country-codes-missing-in.patch

- Update to new upstream version 2.4.22
  - Add support for GPS Bricklet 3.0 and ESP32 (Ethernet) Brick
  - Add Data Logger support for GPS Bricklet 3.0
  - Improve plot color palette for dark themes
  - Rework plot timing logic to greatly reduce jitter
  - Draw a vertical line to indicate time jumps in plots
  - Fix driver installation on Windows
  - Upgrade bundled Python to 3.9 on Windows (Windows 8.1 required)
  - added 0001-red-Handle-service-provider-country-codes-missing-in.patch to fix build

- Update to new upstream version 2.4.21
  - Fix serial port listing on Apple M1 Macs
  - Truncate RED Brick log file view to 10MB
  - Improve hex input mode for RS232 Bricklet 2.0
  - Improve compatibility with Python 3.10
  - Fix OpenGL problems on macOS 12

- Update to new upstream version 2.4.20
  - Hide unused custom line ending controls in hex mode in RS485 Bricklet plugin
  - Reuse thread in Data Logger timer to avoid slow memory leak
  - Fix Data Logger device list clearing on config loading
  - Fix slow memory leak in Data Logger data tab
  - Add firmware version column to Health Monitor dialog
  - Improve udev rule compatibility on Linux
  - Add support for RTC driver config to HAT Brick plugin
  - Add support for simple mode to NFC Bricklet plugin
  - Increase required PySerial version to 3.0
  - Add support for flashing ESP32 (Ethernet) Bricks
- remove upstream patch 0001-udev-rules-Fix-ATTR-assignment.patch

- Fix shebang
- Add patch to fix udev rule warning
  0001-udev-rules-Fix-ATTR-assignment.patch

- Update to new upstream version 2.4.19:
  - Add support for DC 2.0, Industrial PTC and Silent Stepper Bricklet 2.0
  - Add Data Logger support for DC 2.0, Industrial PTC and Silent Stepper Bricklet 2.0
  - Fix Healthmonitor error handling
  - Filter Updates/Flashing and RED Brick Console serial port selection based on
    USB product- and vendor-ID
  version 2.4.18:
  - Add minimal health monitor dialog
  - Fix state handling for untabbed plugins
  - Force correct UI state after aborting autoreconnect on error
  - Handle errors while opening Data Logger debug log file
  - Update download.tinkerforge.com certificate chain to fix update autodetection
  - Autoselect download directory for Brick Viewer downloads
  - Check if NFC Bricklet is in correct state to start cardemu discovery

- Adapt build recipe to python 3 parallel installation support
- Update to new upstream version 2.4.17:
  - Add support for Performance DC Bricklet and Servo Bricklet 2.0

- Update to new upstream version 2.4.16:
  - Add support for IMU Bricklet 3.0 and Industrial Dual AC Relay Bricklet
  - Improve error handling and reporting
  - Support running on integrated GPU on macOS
  - Reduce Qt requirement to 5.11 to fix crash on macOS

- Update to new upstream version 2.4.14:
  - Fix monoflop handling to cover full uint32 duration range
  - Better indicate disconnected state
  - Highlight timeout error counter > 0 in bold red
  - Fix slider/spinbox mismatch on auto-reconnect in DC Brick plugin
  - Avoid UI jumps on value changes in Energy Monitor Bricklet plugin
  - Add extra checkbox to avoid accidental port number changes
  - Handle all errors while downloading firmware updates
  version 2.4.13:
  - Fix race condition in RED Brick program state tracking
  - Report actual cause for connection errors
  - Don't reset RED Brick tab on every enumerate callback (fixes tab reset on
    selecting the Server Monitoring tab)
  - Ensure that all dialogs have proper close buttons
  - Fix close buttons for for detached tabs
  - Fix race condition in RED Brick overview sorting

- Use proper %{_udevrulesdir} instead of (wrong)
  %{_libexecdir}/udev/rules.d.

- Update to new upstream version 2.4.12:
  - make build reproducible (boo#1041090)
  - Fix Server Monitoring support for Ambient Light 3.0 and IO-4 Bricklet 2.0
  - Fix WIFI Extension 2.0 no-encryption configuration
  - Add checkbox for setting the WIFI Extension 2.0 mesh password, old password is
    not shown anymore
  - Improve firmware update error handling
  - Fix RS485 Bricklet Modbus slave logic for write-multiple-registers function
  - Improve RS485 Bricklet input field history handling
  - Fix Data Logger support for Color Bricklet 2.0
  - Improve corner case handling in enumerate callback logic
  - Fix error handling for RED Brick file upload
  - Fix maximum number of LEDs for LED Strip Bricklet 2.0
  - Show milliseconds in GPS Bricklet 2.0 timestamp

- Update to new upstream version 2.4.11:
- Make Thermal Imaging Bricklet image view detachable
- Fix firmware auto-update for Co-MCU Bricklets
- Avoid potential config file writing collision between two Brick Viewer
  instances on Linux and macOS
- Notarize Brick Viewer app to make it ready for macOS 10.15
- Fix potential crash in WIFI Extension 2.0 firmware update detection logic
- Fix exception hook for Python 3.8
- Prefer hPa over mbar and Tesla over Gauss
- Add Data Logger support for RS232 Bricklet 2.0 data reading
- Add Server Monitoring support for Humidity Bricklet 2.0 temperature value
- Lower Hardened Runtime restrictions to make ctypes work again on macOS
- Fix encoding issues in Server Monitoring script
- remove integrated upstream patches
  0001-Support-to-use-local-iso-codes-and-mobile-providers-.patch
  0002-Fix-shebang.patch

- fix review comment to use full path for source location
- fix review comment to remove buildroot and defattr

- added doc files

- Remove shebang from files where not needed
  (0002-Fix-shebang.patch)
- Add support to overwrite iso codes and local providers
  (0001-Support-to-use-local-iso-codes-and-mobile-providers-.patch)
- Force UTF-8 for build scripts
- Switch off source service

- install udev rule
- install desktop file

- fix install command

- use mobile providers list and iso codes provided by the distribution
  (0001-SUSE-Use-local-providers-and-iso-codes.patch)
- add requied python packages dependencies
- use fdupes macro for cleanup duplicated files

- intial version 2.4.9