| AArch64 | |
| ppc64le | |
| s390x | |
| x86-64 |
- Update to version 1.8.2: * fix non zero return code on successful retried tests * avoid kernel warning flood/hang with CTRL+C on Bash 5.2 RC * Fix infinite wait with (invalid) -j<n> (without space) * using external formatters via --formatter <absolute path> (also works for --report-formatter) * running only tests that failed in the last run via --filter-status failed * variable BATS_TEST_RETRIES that specifies how often a test should be reattempted before it is considered failed * BATS_TEST_TIMEOUT variable to force a timeout on test (including setup()) * test_tags=<tag list>/# bats file_tags=<tag list> and --filter-tags <tag list> for tagging tests * add documentation for bats_require_minimum_version, setup_suite, fix typos * improve documentation about setup_suite * allow --gather-test-outputs-in <directory> to work with existing, empty directories * fix load in teardown marking failed tests as not run * add /usr/lib/bats as default value for BATS_LIB_PATH * fix unset variable in bats-formatter-junit when setup_file fails * unify error behavior of teardown/teardown_file/teardown_suite functions: only fail via return code, not via ERREXIT * only print setup_suite's stderr on errors
- Update to version 1.7.0:
* Pretty formatter print filename when entering file (#561)
* BATS_TEST_NAME_PREFIX allows prefixing test names on stdout and in reports (#561)
* setup_suite and teardown_suite (#571, #585)
* out-of-band warning infrastructure, with following warnings:
* BW01: run command not found (exit code 127) (#586)
* BW02: run uses flags without proper `bats_require_minimum_version` guard (#587)
* `bats_require_minimum_version` to guard code that would not run on older
versions (#587)
* unbound variable errors in formatters when using `SHELLOPTS=nounset` (`-u`) (#558)
* don't require `flock` *and* `shlock` for parallel mode test (#554)
* print name of failing test when using TAP13 with timing information (#559, #555)
* removed broken symlink, added regression test (#560)
* don't show empty lines as `#` with pretty formatter (#561)
* prevent `teardown`, `teardown_file`, and `teardown_suite` from overriding bats'
exit code by setting `$status` (e.g. via calling `run`) (#581, #575)
* **CRITICAL**: this can return exit code 0 despite failed tests, thus preventing
your CI from reporting test failures! The regression happened in version 1.6.0.
* `run --keep-empty-lines` now reports 0 lines on empty `$output` (#583)
- Update to version 1.6.1:
* prevent teardown, teardown_file, and teardown_suite from overriding bats'
exit code by setting $status (e.g. via calling run) (#581, #575)
- CRITICAL: this can return exit code 0 despite failed tests, thus
preventing your CI from reporting test failures! The regression happened
in version 1.6.0.
* corrected invalid documentation of run -N (had =N instead) (#579)
- CRITICAL: using the incorrect form can lead to silent errors. See issue
[#578] for more details and how to find out if your tests are affected.
- Update to version 1.6.0
* Added: New flag --code-quote-style (and $BATS_CODE_QUOTE_STYLE)
to customize quotes around code blocks in error output
* Added: bats_load_library for loading libraries from the search
path $BATS_LIB_PATH
* Improved error trace for some broken cases
* Fixed leaking of local variables from debug trap
* Don't mark FD3 output from teardown_file as <failure> in junit
output
* Fix unbound variable error with Bash pre 4.4
- update to 1.1.0 - drop build-term.patch package-json.patch - new upstream, see changes on https://github.com/bats-core/bats-core/releases
- update to 1.10.0:
* add `${BATS_TEST_TAGS[@]}` for querying the tags during a
test
* print tags on failing tests
* test for negative arguments to `--jobs`
* add tests for `--formatter cat`
* test coverage in CI
* Support for rush as alternative to GNU parallel
* add `bats_pipe` helper function for `run` that executes `\|`
as pipes
* publish docker images to ghcr.io (additionally to Dockerhub)
* clarify use cases of `--formatter cat`
* fix `run` with options overwriting the value of `i`
* fix `${BATS_TEST_NAMES[@]}` containing only `--tags` instead
of test name since Bats v1.8.0
* fix `run --keep-empty-lines` counting trailing ` ` as
(empty) new line
* fix short flag unpacker creating bogus command lines with
valued flags
* fix formatter becoming confused with retries
* fix `--gather-test-outputs-in` fails on tests with `/`
* fix overriding `date` breaks `--timing`
- Update to version 1.9.0:
* add installation instructions for Debian, Fedora, Gentoo, and OpenSUSE (#659)
* add `--line-reference-format` to switch file/line references in stack traces (#665)
* add `bats:focus` tag to run only focused tests (#679)
* add bats-support, bats-assert, bats-file and bats-detik to Dockerfile (#674)
* add `--help` text and `man` page content for `--filter-tags` (#679)
* explicitly check for GNU parallel (#691)
* wait for report-formatter to finish before ending `bats`' execution,
to fix empty files with `--report-fomatter junit` under Docker (#692)
* improved clarity of section about output in free code (#671)
* fixed typos (#673)
* clarify use cases of `run` (#366)
- boo#1193177: Fix build on Leap and SLE
- update to 1.5.0:
* new command line flags
* `--verbose-run`: Make `run` print `$output` by default
* `-x`, `--trace`: Print test commands as they are executed (like `set -x`)`
* `--show-output-of-passing-tests`: Print output of passing tests
* `--print-output-on-failure`: Automatically print the value of `$output` on
failed tests
* `--gather-test-outputs-in <directory>`: Gather the output of failing **and**
passing tests as files in directory
* Experimental: add return code checks to `run` via `!`/`-<N>`
* `install.sh` and `uninstall.sh` take an optional second parameter for the lib
folder name to allow for multilib install, e.g. into lib64
* add `run` flag `--keep-empty-lines` to retain empty lines in `${lines[@]}`
* add `run` flag `--separate-stderr` which also fills `$stderr` and
`$stderr_lines`
* don't glob `run`'s `$output` when splitting into `${lines[@]}`
* remove empty line after test with pretty formatter on some terminals
* don't run setup_file/teardown_file on files without tests, e.g. due to
filtering
* print final line without newline on Bash 3.2 for midtest (ERREXIT) failures
* abort with error on missing flock/shlock when running in parallel mode
* improved `set -u` test and fixed some unset variable accesses
* shorten suite/file/test temporary folder paths to leave enough space even on
restricted systems
* added BATS_TEST_TMPDIR, BATS_FILE_TMPDIR, BATS_SUITE_TMPDIR
* added checks and improved documentation for `$BATS_TMPDIR`
* the docker container now uses [tini](https://github.com/krallin/tini) as the
container entrypoint to improve signal forwarding
* script to uninstall bats from a given prefix
* replace preprocessed file path (e.g. `/tmp/bats-run-22908-NP0f9h/bats.23102.src`)
with original filename in stdout/err (but not FD3!)
* print aborted command on SIGINT/CTRL+C
* print error message when BATS_RUN_TMPDIR could not be created
- Update to 1.3.0
* Added custom test-file extension via BATS_FILE_EXTENSION when
searching for test files in a directory
* Added TAP13 formatter, including millisecond timing
* Recursive suite mode will follow symlinks now
* Split options for (file-) --report-formatter and (stdout)
- -formatter
WARNING: This changes the meaning of --formatter junit.
stdout will now show unified xml instead of TAP. From now on,
please use --report-formatter junit to obtain the .xml report file!
* Removed --parallel-preserve-environment flag, as this is the default
* Preprocessed files are no longer removed if --no-tempdir-cleanup
is specified
* Fix internal failures due to unbound variables when test files
use set -u
* Fix internal failures due to changes to $PATH in test files
* Fix hangs on CTRL+C
* Make BATS_TEST_NUMBER count per file again
* Performance improvements
* Improved documentation
- Dropped upstream merged
bsc1180135-0001-fix-dont-use-unbound-variables-in-setup-methods.patch
- Backport <https://github.com/bats-core/bats-core/pull/344>. bsc#1180135 + bsc1180135-0001-fix-dont-use-unbound-variables-in-setup-methods.patch
- update to 1.2.1: * added: - JUnit output and extensible formatter rewrite (#246) - load function now reads from absolute and relative paths, and $PATH (#282) - Beginner-friendly examples in /docs/examples (#243) - @peshay's bats-file fork contributed to bats-core/bats-file (#276) * changed: - Duplicate test names now error (previous behaviour was to issue a warning) (#286) - Changed default formatter in Docker to pretty by adding ncurses to Dockerfile, override with --tap (#239) - Replace "readlink -f" dependency with Bash solution (#217)
- Install to /usr/libexec on Tumbleweed
- Require gnu_parallel so that 'bats --jobs' works out of the box and is tested as part of the integration tests of the package.
- update to 1.2.0: * Added: - docs/CHANGELOG.md and docs/releasing.md (#122) - The -f, --filter flag to run only the tests matching a regular expression (#126) - Optimize stack trace capture (#138) - --jobs n flag to support parallel execution of tests with GNU parallel (#172) * Changed: - AppVeyor builds are now semver-compliant (#123) - Add Bash 5 as test target (#181) - Always use upper case signal names to avoid locale dependent err… (#215) - Fix for tests reading from stdin (#227) - Fix wrong line numbers of errors in bash < 4.4 (#229) - Remove preprocessed source after test run (#232)
- Reinstate prematurely removed Group tag
- Remove obsolete Groups tag (fate#326485)
- update to 1.1.0 - drop build-term.patch package-json.patch - new upstream, see changes on https://github.com/bats-core/bats-core/releases
- Added build-term.patch: work-around for bnc#1026350
- Fix RPM group
- Spec file improvements: * Run tests in %check section * Correct project URL
- Spec file improvements: * /usr/bin/tput is optional at runtime * Reference to meaning of TAP-compliant * Simplify launch of tests
- Initial version: bats 0.4.0