avrdude-6.3-bp151.3.2

- marked avrdude.keyring and debian.avrdude.udev as sources in
  specfile

- add USB IDs for Arduino Micro
- add download URL and keyring

- remove incorrect provides in library subpackage
- remove not needed obsoletes in library subpackage
- make libftdi1 build dependency only for openSUSE
- spec file cleaned by spec-cleaner

- drop parport from 50-avrdude.rules for udev (bsc#994883)
  limit to USB

- Update to 6.3
  * New devices supported:
  - ATmega48PB, ATmega88PB, ATmega168PB
  - ATtiny28 (HVPP-only device)
  - AT90PWM216 (bug #42310: New part description for AT90PWM216)
  - ATmega32M1 (patch #7694 Add support for the atmega32m1)
  * New programmers supported:
  - Atmel mEDBG: xplainedmini, xplainedmini_dw
  - ftdi_syncbb
  - uncompatino, ttl232r (FTDI TTL232R-5V with ICSP adapter)
    (patch #8529 2 more ftdi_syncbb devices)
  - Atmel DFU, using FLIP protocol version 1 (AT90USB and ATmegaU
    devices), or version 2 (Xmega devices)
  - Atmel-ICE (ARM/AVR), JTAG, PDI, debugWIRE, ISP modi
  * Major changes compared to the previous version:
  - The stk500v2 implementation now uses its own higher-level
    command implementation for byte-wide access, rather than the
    historic SPI_MULTI command where all the low-level ISP
    implementation had to be assembled manually inside AVRDUDE. In
    addition to the traditional STK500, this implementation is also
    used by all the more modern Atmel tools (AVRISPmkII, JTAGICEmkII
    in ISP mode, STK600 in ISP mode).
  - The -B option can be suffixed with "Hz", "kHz", or "MHz", in
    order to specify a bitclock frequency rather than period.
  - Print part id after signature (patch #8440 )
  - buspirate: Also support "cpufreq" extended parameter
    in binary mode (patch #8504 )
  - The "-P net:" syntax (forwarding of serial data over TCP) is now
    also implemented for Win32 systems.
  - Atmel EDBG protocol support added (JTAGICE3, XplainedPro, Atmel-ICE)
- disable IPv6 temporarily

- include released tarball from upstream
- disable source service
- refresh patch avrdude-5.11-no-builddate.diff

- Bump version number to 6.1 in _service to reflect upstream.
- Generate udev rules from avrdude-usbdevices, which has a simpler
  and easier to maintain format. This also simplifies following
  further upstream changes in udev rules syntax.
- IPv6-enable the "-P net:host:port" option (avrdude-ipv6.patch).

- no longer use an URL for the source, since the tarball is generated

- set the _service to localonly

- work around systemd-udev warnings, by moving comments in the
  udev rules file to the beginning of a line.

- Build the info file only, no PS/PDF documentation.
- Don't require libftdi for older SUSE versions.

- Build from svn snapshot (last official release is too old).
- avrdude-use-serial-device-for-serbb.patch is no longer needed.
- Add UDB IDs for Arduino Leonardo and LUFA ACM bootloaders.
- Give access to programmer devices only to local users.
- Build documentation from source instead of importing pre-built
  html and pdf documentation.
- Disable documentation building on releases older than 12.3 due
  to texinfo problems.

- Did not build.
- 5.11 tar balls are now missing again. retrying with 5.11.1
- typo in spec file fixed.

- All this should have been part of my earlier submit sr#142228:
  * obsoleted upstreamed patches: tn4313.diff, avrdude_butterfly_mk.patch
  * pulled patch from o:F: avrdude-use-serial-device-for-serbb.patch
  * dropped dubious patch: avrdude-5.5.usbtiny.64bit.patch

- retrying sr#110452, sr#141518, so that we can finally close bnc#736064
- merged a commit that was only made to o:F

- Reverted to version 5.11 -- the 5.11.1 tarball was missing.

- Version 5.11.1 from savannah
- Add libftdi1-devel to BuildRequires to support additional
  programmers.

- don't use download_files service - it breaks all the time
- remove builddate from binary to avoid unnecessary republising

- Remove redundant tags/sections from specfile
- Use %_smp_mflags for parallel build

- Version 5.11 from savannah