PrusaSlicer-2.4.2-bp155.1.41

- Quoting Lucas Matena (see gh#prusa3d/PrusaSlicer#8299, issue 2):
  if you link PrusaSlicer 2.5.x with wxWidgets 3.2, you will most
  likely break it: link against wxWidgets 3.0.5

- Add PrusaSlicer-cereal.patch -- gh#prusa3d/PrusaSlicer#7809

- Disable test_voronoi -- rh#2059646

- Update to version 2.4.2
  * SLA mode incorrectly handled 3MFs from 3rd party software,
    resulting in misplaced SLA support points and holes in some
    cases (#6100, #7359, #7189, #7826, #7659). This is very old
    issue.
  * Vase mode preview did not show in cases when Custom Start
    G-Code lacked moves in Z #8032
  * When loading a 3rd party 3MF using drag and drop. PrusaSlicer
    no longer asks if the 3MF shall be loaded as a project (which
    makes no sense since it contains no config) and loads the
    geometry only
  * Using the Layer Height Modifier with the wipe tower was
    impossible with multiple objects. The wipe tower reported that
    the layer height profile is different, even though it was in
    fact set the same on all objects (#7711, #7903, #8044)
  * Fixed a crash on "Convert from/to units" when several objects
    were selected
  * Automatic color change for logo crashed PrusaSlicer in certain
    cases (when a one-layer object was present) #8156
  * Linux specific: Fixed a crash on opening projects in some cases
    (#8078, #8097)
  * Added Snapmaker bundle (Snapmaker A250, Snapmaker A350). Based
    on https://github.com/nivekmai/snapmaker-prusa by @nivekmai,
    @WilliamBosacker, @mrworf
  * Added profiles for Zonestar printers (Z5, Z6, Z5X, Z8, Z9),
    based on slic3r/slic3r-profiles#19 by @ZONESTAR3D
  * Fixed a crash when Unsaved Changes dialog attempted to show a
    modified config option which is not available in current mode
    (e.g. Start G-Code in Simple mode). #7905
  * Fixed a bug that when the user was closing the application and
    replied 'Yes' in the dialog asking about unsaved project while
    also checking 'Remember my choice', it made it impossible to
    close PrusaSlicer in the next runs when there were no objects
    in the plater #8076, #8122
  * Loading of a G-Code in G-Code Viewer or loading config from
    G-Code file sometimes failed because of a bug in parsing of the
    configuration block at the end.
  * Fixed incorrect rendering of some characters used in the
    recently updated Simplified Chinese translation #8171
  * Fixed incorrect number of toolchanges reported in "Sliced Info"
    box when wipe tower was used. The annotations of toolchanges in
    G-Code were also numbered wrong #8186
  * Fixed a crash when using the "Import SL1 Archive" function and
    either cancelling the dialog or confirming a non-existing file
    [#8175]
  * Recycling symbols in Shape Gallery were mirrored so the user
    does not have to flip them when using them as negative volumes
    at the base of the print (which is the usual use case). Also,
    PLA recycling symbol was added #7800

- Refresh PrusaSlicer-boost1.79.patch with upstream's fix
  * gh#prusa3d/PrusaSlicer#8238

- Add PrusaSlicer-boost1.79.patch avoiding the deprecation
  of boost::filesystem::ofstream in Boost 1.79
  * gh#prusa3d/PrusaSlicer#8238

- Use gcc version 10 for anything but Tumbleweed

- Use gcc version 10
  This allows the build on Leap 15.3/15.4 and in Factory using the same
  compiler.
- Add buildignore to libglfw3-wayland to fix building for 15.3

- Update to 2.4.1
  * Big changelog since v2.4.0, most changes decribed in alpha and
    beta release notes:
    https://github.com/prusa3d/PrusaSlicer/releases
  * introducing G-Code Substitutions
  * fixing bugs found in 2.4.0 release

- Update to 2.4.0
  * Big changelog since v2.3.3, most changes decribed in alpha and
    beta release notes:
    https://github.com/prusa3d/PrusaSlicer/releases
  * Send system info: new dialog for telemetry. Opt-in.
- Drop patches
  * PrusaSlicer-catch2upd.patch
  * PrusaSlicer-issue6681-openvdb.patch
  * PrusaSlicer-pr6590-updateTBB.patch

- Make compatible with TBB 2021
  * add FindTBB.cmake -- gh#prusa3d/PrusaSlicer#7332
  * add PrusaSlicer-pr6590-updateTBB.patch
    gh#prusa3d/PrusaSlicer#6590

- Add PrusaSlicer-catch2upd.patch
  * gh#prusa3d/PrusaSlicer#6518
  * Update of Catch2 test framework from v2.13.3 to v2.13.6
  * Fixes build failure due to change of MINSIGSTKSZ in glibc 2.34

- Add PrusaSlicer-issue6681-openvdb.patch
  * gh#prusa3d/PrusaSlicer#6681
  * ilmbase-devel is now provided by openexr-devel
  * OpenVDB's FindOpenVDB.cmake requires blosc-devel

- Update to v2.3.3
  * fix a bug in handling FDM multi-material project and
    configuration files.

- Update to v2.3.2
  * Introducing support for the new Prusa SL1S SPEED masked
    SLA printer, Prusa CW1S firmware updater, PrusaLink
    host type for Prusa i3 MK3 printers, Monotonic infill
    for all solid layers, better support for reading
    configurations of newer PrusaSlicer releases, new 3rd
    party printer profiles and a handful of bug fixes.
- Switch to bundled GLEW -- gh#prusa3d/PrusaSlicer#6396

- Update to v2.3.1
  New 3rd party printer profiles
  * Multiple Creality printers profiles were added (Ender-3 Max,
    Ender-4, Ender-6, CR-5 Pro, CR-5 Pro H, CR-6 SE, CR-6 Max,
    CR-10 Max, CR-200B, CR-8), thanks @pmjdebruijn.
  * Added Artillery printer profiles (Sidewinder X1, Genius),
    thanks @SzabolcsHornyak.
  * Added INAT printer profiles, thanks @MarkINAT.
  * Updated Anycubic Kossel bed texture (thanks @brunosso) and
    Anycubic Kossel bed STL.
  Vulnerability issues fixed
  * The Talos Cisco Intelligence Group did a great job identifying
    potential security issues in loading invalid and potentially
    malicious AMF and 3MF files, see their vulnerability reports
    TALOS-2020-1222 and TALOS-2020-1218. We fixed these two
    potential security issues with this release of PrusaSlicer.
  Bugs fixed with respect to PrusaSlicer 2.3.0
  * Reduced number of hits shown by the "Find config option"
    dialog, fixed case insensitive search for non-Latin1 languages
    [#5202].
  * Fixed G-code preview with coloring by a tool and visualization
    of travels enabled #6095.
  * Fixed opening of drop down menus at the bottom of the screen
    on multi-monitor setups #2999 #5911 #5957. This issue has been
    fixed by us in wxWidgets and accepted by the upstream.

- Update to v2.3.0
  * Introducing paint-on supports, ironing, monotonic
    infill, seam painting, adaptive and support cubic
    infill, print time per feature analysis, standalone
    G-code viewer application, better auto-arrange with a
    customizable gap and rotation, search function for the
    settings, reworked "Avoid crossing perimeters" function,
    physical printers (network settings), many new 3rd party
    printer profiles and much, much more.
- Full Changelog entries for betas and release candidates:
  https://github.com/prusa3d/PrusaSlicer/releases
- Drop PrusaSlicer-pr4340-boost-1-73.patch merged upstream

- Remove extra PrusaSlicer.desktop. Use upstream's desktop files.
  Graphics;3DGraphics seems to be the consensus now.
- Remove wrapper gh#prusa3d/PrusaSlicer#4691

- support boost >= 1.73
  * PrusaSlicer-pr4340-boost-1-73.patch gh#prusa3d/PrusaSlicer#4340
  * fixes gh#prusa3d/PrusaSlicer#4264

- enforce GDK_BACKEND=x11 by indroducing the same wrapper as Fedora
  gh#prusa3d/PrusaSlicer#4691