SUSE Package Hub 15 one-click install
Install plplot
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-Standard-Pool
Package Hub 15
Dummy repo - this will fail
-
plplot
Software package for creating scientific plots
PLplot is a library of functions that are useful for making scientific
plots.
PLplot can be used from within compiled languages such as C, C++,
FORTRAN and Java, and interactively from interpreted languages such as
Octave, Python, Perl and Tcl.
The PLplot library can be used to create standard x-y plots, semilog
plots, log-log plots, contour plots, 3D surface plots, mesh plots, bar
charts and pie charts. Multiple graphs (of the same or different sizes)
may be placed on a single page with multiple lines in each graph.
A variety of output file devices such as Postscript, png, jpeg, LaTeX
and others, as well as interactive devices such as xwin, tk, xterm and
Tektronics devices are supported. New devices can be easily added by
writing a small number of device dependent routines.
There are almost 2000 characters in the extended character set. This
includes four different fonts, the Greek alphabet and a host of
mathematical, musical, and other symbols. Some devices supports its own
way of dealing with text, such as the Postscript and LaTeX drivers, or
the png and jpeg drivers that uses the Freetype library.
This package provides the shared libraries for PLplot.
SUSE Package Hub 15 one-click install
Install plplot
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-Standard-Pool
Package Hub 15
Dummy repo - this will fail
-
plplot
Software package for creating scientific plots
PLplot is a library of functions that are useful for making scientific
plots.
PLplot can be used from within compiled languages such as C, C++,
FORTRAN and Java, and interactively from interpreted languages such as
Octave, Python, Perl and Tcl.
The PLplot library can be used to create standard x-y plots, semilog
plots, log-log plots, contour plots, 3D surface plots, mesh plots, bar
charts and pie charts. Multiple graphs (of the same or different sizes)
may be placed on a single page with multiple lines in each graph.
A variety of output file devices such as Postscript, png, jpeg, LaTeX
and others, as well as interactive devices such as xwin, tk, xterm and
Tektronics devices are supported. New devices can be easily added by
writing a small number of device dependent routines.
There are almost 2000 characters in the extended character set. This
includes four different fonts, the Greek alphabet and a host of
mathematical, musical, and other symbols. Some devices supports its own
way of dealing with text, such as the Postscript and LaTeX drivers, or
the png and jpeg drivers that uses the Freetype library.
This package provides the shared libraries for PLplot.
SUSE Package Hub 15 SP1 one-click install
Install plplot
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP1-Backports-Pool
Package Hub 15 SP1
Dummy repo - this will fail
-
plplot
Software package for creating scientific plots
PLplot is a library of functions that are useful for making scientific
plots.
PLplot can be used from within compiled languages such as C, C++,
FORTRAN and Java, and interactively from interpreted languages such as
Octave, Python, Perl and Tcl.
The PLplot library can be used to create standard x-y plots, semilog
plots, log-log plots, contour plots, 3D surface plots, mesh plots, bar
charts and pie charts. Multiple graphs (of the same or different sizes)
may be placed on a single page with multiple lines in each graph.
A variety of output file devices such as Postscript, png, jpeg, LaTeX
and others, as well as interactive devices such as xwin, tk, xterm and
Tektronics devices are supported. New devices can be easily added by
writing a small number of device dependent routines.
There are almost 2000 characters in the extended character set. This
includes four different fonts, the Greek alphabet and a host of
mathematical, musical, and other symbols. Some devices supports its own
way of dealing with text, such as the Postscript and LaTeX drivers, or
the png and jpeg drivers that uses the Freetype library.
This package provides the shared libraries for PLplot.
SUSE Package Hub 15 SP1 one-click install
Install plplot
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP1-Backports-Pool
Package Hub 15 SP1
Dummy repo - this will fail
-
plplot
Software package for creating scientific plots
PLplot is a library of functions that are useful for making scientific
plots.
PLplot can be used from within compiled languages such as C, C++,
FORTRAN and Java, and interactively from interpreted languages such as
Octave, Python, Perl and Tcl.
The PLplot library can be used to create standard x-y plots, semilog
plots, log-log plots, contour plots, 3D surface plots, mesh plots, bar
charts and pie charts. Multiple graphs (of the same or different sizes)
may be placed on a single page with multiple lines in each graph.
A variety of output file devices such as Postscript, png, jpeg, LaTeX
and others, as well as interactive devices such as xwin, tk, xterm and
Tektronics devices are supported. New devices can be easily added by
writing a small number of device dependent routines.
There are almost 2000 characters in the extended character set. This
includes four different fonts, the Greek alphabet and a host of
mathematical, musical, and other symbols. Some devices supports its own
way of dealing with text, such as the Postscript and LaTeX drivers, or
the png and jpeg drivers that uses the Freetype library.
This package provides the shared libraries for PLplot.
SUSE Package Hub 15 SP2 one-click install
Install plplot
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP2-Backports-Pool
Package Hub 15 SP2
Dummy repo - this will fail
-
plplot
Software package for creating scientific plots
PLplot is a library of functions that are useful for making scientific
plots.
PLplot can be used from within compiled languages such as C, C++,
FORTRAN and Java, and interactively from interpreted languages such as
Octave, Python, Perl and Tcl.
The PLplot library can be used to create standard x-y plots, semilog
plots, log-log plots, contour plots, 3D surface plots, mesh plots, bar
charts and pie charts. Multiple graphs (of the same or different sizes)
may be placed on a single page with multiple lines in each graph.
A variety of output file devices such as Postscript, png, jpeg, LaTeX
and others, as well as interactive devices such as xwin, tk, xterm and
Tektronics devices are supported. New devices can be easily added by
writing a small number of device dependent routines.
There are almost 2000 characters in the extended character set. This
includes four different fonts, the Greek alphabet and a host of
mathematical, musical, and other symbols. Some devices supports its own
way of dealing with text, such as the Postscript and LaTeX drivers, or
the png and jpeg drivers that uses the Freetype library.
This package provides the shared libraries for PLplot.
SUSE Package Hub 15 SP2 one-click install
Install plplot
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP2-Backports-Pool
Package Hub 15 SP2
Dummy repo - this will fail
-
plplot
Software package for creating scientific plots
PLplot is a library of functions that are useful for making scientific
plots.
PLplot can be used from within compiled languages such as C, C++,
FORTRAN and Java, and interactively from interpreted languages such as
Octave, Python, Perl and Tcl.
The PLplot library can be used to create standard x-y plots, semilog
plots, log-log plots, contour plots, 3D surface plots, mesh plots, bar
charts and pie charts. Multiple graphs (of the same or different sizes)
may be placed on a single page with multiple lines in each graph.
A variety of output file devices such as Postscript, png, jpeg, LaTeX
and others, as well as interactive devices such as xwin, tk, xterm and
Tektronics devices are supported. New devices can be easily added by
writing a small number of device dependent routines.
There are almost 2000 characters in the extended character set. This
includes four different fonts, the Greek alphabet and a host of
mathematical, musical, and other symbols. Some devices supports its own
way of dealing with text, such as the Postscript and LaTeX drivers, or
the png and jpeg drivers that uses the Freetype library.
This package provides the shared libraries for PLplot.
SUSE Package Hub 15 SP3 one-click install
Install plplot
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP3-Backports-Pool
Package Hub 15 SP3
Dummy repo - this will fail
-
plplot
Software package for creating scientific plots
PLplot is a library of functions that are useful for making scientific
plots.
PLplot can be used from within compiled languages such as C, C++,
FORTRAN and Java, and interactively from interpreted languages such as
Octave, Python, Perl and Tcl.
The PLplot library can be used to create standard x-y plots, semilog
plots, log-log plots, contour plots, 3D surface plots, mesh plots, bar
charts and pie charts. Multiple graphs (of the same or different sizes)
may be placed on a single page with multiple lines in each graph.
A variety of output file devices such as Postscript, png, jpeg, LaTeX
and others, as well as interactive devices such as xwin, tk, xterm and
Tektronics devices are supported. New devices can be easily added by
writing a small number of device dependent routines.
There are almost 2000 characters in the extended character set. This
includes four different fonts, the Greek alphabet and a host of
mathematical, musical, and other symbols. Some devices supports its own
way of dealing with text, such as the Postscript and LaTeX drivers, or
the png and jpeg drivers that uses the Freetype library.
This package provides the shared libraries for PLplot.
SUSE Package Hub 15 SP3 one-click install
Install plplot
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP3-Backports-Pool
Package Hub 15 SP3
Dummy repo - this will fail
-
plplot
Software package for creating scientific plots
PLplot is a library of functions that are useful for making scientific
plots.
PLplot can be used from within compiled languages such as C, C++,
FORTRAN and Java, and interactively from interpreted languages such as
Octave, Python, Perl and Tcl.
The PLplot library can be used to create standard x-y plots, semilog
plots, log-log plots, contour plots, 3D surface plots, mesh plots, bar
charts and pie charts. Multiple graphs (of the same or different sizes)
may be placed on a single page with multiple lines in each graph.
A variety of output file devices such as Postscript, png, jpeg, LaTeX
and others, as well as interactive devices such as xwin, tk, xterm and
Tektronics devices are supported. New devices can be easily added by
writing a small number of device dependent routines.
There are almost 2000 characters in the extended character set. This
includes four different fonts, the Greek alphabet and a host of
mathematical, musical, and other symbols. Some devices supports its own
way of dealing with text, such as the Postscript and LaTeX drivers, or
the png and jpeg drivers that uses the Freetype library.
This package provides the shared libraries for PLplot.
SUSE Package Hub 15 SP4 one-click install
Install plplot
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP4-Backports-Pool
Package Hub 15 SP4
Dummy repo - this will fail
-
plplot
Software package for creating scientific plots
PLplot is a library of functions that are useful for making scientific
plots.
PLplot can be used from within compiled languages such as C, C++,
FORTRAN and Java, and interactively from interpreted languages such as
Octave, Python, Perl and Tcl.
The PLplot library can be used to create standard x-y plots, semilog
plots, log-log plots, contour plots, 3D surface plots, mesh plots, bar
charts and pie charts. Multiple graphs (of the same or different sizes)
may be placed on a single page with multiple lines in each graph.
A variety of output file devices such as Postscript, png, jpeg, LaTeX
and others, as well as interactive devices such as xwin, tk, xterm and
Tektronics devices are supported. New devices can be easily added by
writing a small number of device dependent routines.
There are almost 2000 characters in the extended character set. This
includes four different fonts, the Greek alphabet and a host of
mathematical, musical, and other symbols. Some devices supports its own
way of dealing with text, such as the Postscript and LaTeX drivers, or
the png and jpeg drivers that uses the Freetype library.
This package provides the shared libraries for PLplot.
SUSE Package Hub 15 SP4 one-click install
Install plplot
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP4-Backports-Pool
Package Hub 15 SP4
Dummy repo - this will fail
-
plplot
Software package for creating scientific plots
PLplot is a library of functions that are useful for making scientific
plots.
PLplot can be used from within compiled languages such as C, C++,
FORTRAN and Java, and interactively from interpreted languages such as
Octave, Python, Perl and Tcl.
The PLplot library can be used to create standard x-y plots, semilog
plots, log-log plots, contour plots, 3D surface plots, mesh plots, bar
charts and pie charts. Multiple graphs (of the same or different sizes)
may be placed on a single page with multiple lines in each graph.
A variety of output file devices such as Postscript, png, jpeg, LaTeX
and others, as well as interactive devices such as xwin, tk, xterm and
Tektronics devices are supported. New devices can be easily added by
writing a small number of device dependent routines.
There are almost 2000 characters in the extended character set. This
includes four different fonts, the Greek alphabet and a host of
mathematical, musical, and other symbols. Some devices supports its own
way of dealing with text, such as the Postscript and LaTeX drivers, or
the png and jpeg drivers that uses the Freetype library.
This package provides the shared libraries for PLplot.
SUSE Package Hub 15 SP5 one-click install
Install plplot
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP5-Standard-Pool
Package Hub 15 SP5
Dummy repo - this will fail
-
plplot
Software package for creating scientific plots
PLplot is a library of functions that are useful for making scientific
plots.
PLplot can be used from within compiled languages such as C, C++,
FORTRAN and Java, and interactively from interpreted languages such as
Octave, Python, Perl and Tcl.
The PLplot library can be used to create standard x-y plots, semilog
plots, log-log plots, contour plots, 3D surface plots, mesh plots, bar
charts and pie charts. Multiple graphs (of the same or different sizes)
may be placed on a single page with multiple lines in each graph.
A variety of output file devices such as Postscript, png, jpeg, LaTeX
and others, as well as interactive devices such as xwin, tk, xterm and
Tektronics devices are supported. New devices can be easily added by
writing a small number of device dependent routines.
There are almost 2000 characters in the extended character set. This
includes four different fonts, the Greek alphabet and a host of
mathematical, musical, and other symbols. Some devices supports its own
way of dealing with text, such as the Postscript and LaTeX drivers, or
the png and jpeg drivers that uses the Freetype library.
This package provides the shared libraries for PLplot.
SUSE Package Hub 15 SP5 one-click install
Install plplot
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP5-Standard-Pool
Package Hub 15 SP5
Dummy repo - this will fail
-
plplot
Software package for creating scientific plots
PLplot is a library of functions that are useful for making scientific
plots.
PLplot can be used from within compiled languages such as C, C++,
FORTRAN and Java, and interactively from interpreted languages such as
Octave, Python, Perl and Tcl.
The PLplot library can be used to create standard x-y plots, semilog
plots, log-log plots, contour plots, 3D surface plots, mesh plots, bar
charts and pie charts. Multiple graphs (of the same or different sizes)
may be placed on a single page with multiple lines in each graph.
A variety of output file devices such as Postscript, png, jpeg, LaTeX
and others, as well as interactive devices such as xwin, tk, xterm and
Tektronics devices are supported. New devices can be easily added by
writing a small number of device dependent routines.
There are almost 2000 characters in the extended character set. This
includes four different fonts, the Greek alphabet and a host of
mathematical, musical, and other symbols. Some devices supports its own
way of dealing with text, such as the Postscript and LaTeX drivers, or
the png and jpeg drivers that uses the Freetype library.
This package provides the shared libraries for PLplot.