phonon4qt5-4.9.0-2.1

- Drop BuildRequires on obsolete QtQuick1 module

- Update to 4.9.0
  * Changes
  * Builsystem helpers are now installed to CMAKE_INSTALL_DATAROOTDIR
  * CMake 2.8.9 is required to use GNUInstallDirs and for the Qt5
    code branches
  * automoc4 support was removed. Building always use the cmake
    built-in solution now.
  * Qt5 and Qt4 builds use different CMake configurations now
    Qt4 is as it always has been
  * Qt5 moved away from crudely ported Qt4 configurations to using
    extra-cmake-modules' KDE compiler and cmake flags.
  * Installation paths and so forth are still jointly configured as
    to retain backwards compatibility (i.e. Qt5 build does not
    follow ECM's KDEInstallationPaths)
  * Bug Fixes
  * VolumeSlider has seen async behavior improvements making the
    slider not hop around when changing the volume rapidly and
    the backend is lagging a bit behind.
  * The volume change now occurs upon slider release rather
    than instantly.
  * Fixed a duble encoding issue with local paths that contain
    percent encoded characters being double-encoded [kde#356218]
  * New API
  * New AudioOutputInterface49 for backends to implement. This
    interface implements long-existing frontend interfaces for
    muting, giving the backend easier access and control.
  * setMuted(bool) mutes an AudioOuput (without the 4.9
    interface this is done via setVolume(0.0) on the backend)
  * mutedChanged(bool) signal emitted by the backend to
    asyncronuously notify of the mute application
  * The interface is only used if PulseSupport is not
    intercepting calls
  * New methods to differntiate states of PulseSupport
  * request(bool) is used by backends to request PulseAudio
    usage but no interception, this essentially enables device
    listing but lets everything else fall through to the backend
    (the existing isActive() method will not return true after
    request(true), which makes it different from enable(true))
  * isRequested() is a getter for request()'s state
  * isUsable() is part of the previouys isActive() behavior,
    it is true iff pulseaudio can be used
    (daemon running, connected etc)
  * isUsed() is a combination of isRequested() and isUsable()
    (i.e. active but not intercepting)
  * The existing isActive() communicates the same state as
    before (active and intercepting) but now also takes
    requested into consideration
  * Enabling always implies requsting automatically, so
    request(false) and enable(true) will ultimately still
    restul in isRequested==true
- Drop upstreamed 0001-tear-cmake-logic-for-qt4-and-qt5-apart.patch

- Add phonon4qt5-rpmlintrc to work around future build checks (boo#1191779)

- Drop the unneeded baselibs.conf.

- Added 0001-tear-cmake-logic-for-qt4-and-qt5-apart.patch from
  upstream, to handle better -fPIC flag in Qt 5 builds
- Drop pic.patch
- Added extra-cmake-modules >= 1.7.0 (Build)Requires, needed with
  the added patch

- Added pic.patch, fix build with latest Qt5 - it now requires -fPIC
  flag instead of -fPIE when Qt is built with reduced-relocations
  option

- Update to 4.8.3:
  * Set target interface include install dir
  * Do not assume we have a backend when setting an output device,
    kde#341296

- Update to 4.8.2:
  * Revised the logic used by PulseSupport to come up with an icon
    name for PulseAudio. If the application has
    QApplication::windowIcon set with an QIcon constructed through
    QIcon::fromTheme(string) the actual icon name will be used.
    Otherwise the lower-case version of
    QCoreApplication::applicationName is used.
  * Fixed building with the compiler clang by reverting
    a previously introduced workaround.
- Fix Requires of devel package, there was a wrong "BuildRequires",
  and they shall be found by pkg-config detection

- Update to 4.8.1:
  * Version bump
  * Prevent a crash when failing to create the preferred backend

- Update to 4.7.80
  * 4.8 beta: PA interaction improvements, documentation fixes and
    standard bugfixes

- Update to 4.7.2
  * Bugfix release, no changelog provided

- Add baselibs.conf

- Adjust filelists to kf5-filesystem changes

- Remove baselibs.conf, until baselibs for libqt5-qttools are
  provided

- Move to kf5-filesystem, instead of kde4 one
- Only BuildRequire those libraries which are needed
- Adjust baselibs.conf to reality

- Update to 4.7.1
  * Fixed compatibility issues with older backend versions
- Move away from pkgconfig(...) BuildRequires and just use
  libqt5-$upstreammodulename-(devel|private-headers-devel)

- Build phonon4qt5 package
- Remove obsolete, and not needed 'ready' file
- Remove not needed automoc4 BuildRequires

- Update to official 4.7.0 release
  * Minor documentation fixes since last update
- Add Source URL

- Update to 4.7.0~git20131104
  * Buildsystem fixes since previous snapshot
  * Version bump to 4.7.0

- Update to 4.6.80~git20130930
  * Add preference system ontop of Qt5 backend loading
  * Unbreak documentation of AO47
  * Don't crash when trying to create the singleton out of a
    qapp parented AO (kde#293004)

- Drop 0001-Revert-cache-volume-inside-PAStreams-when-trying-to-.patch
  better solution is done in kdebase4-runtime package

- Added 0001-Revert-cache-volume-inside-PAStreams-when-trying-to-.patch,
  which resolves a regression in volume getting restored after each
  knotify event (kde#324975)

- Update to 4.6.80~git20130915
  * Snapshot of soon to be released 4.7 version
  * Various improvements, bugfixes, API aditions, documentation fixes
  * Qt5 support
- Drop phonon-4.6.0-find-backends-outside-of-kde-session.diff

- Add phonon-4.6.0-find-backends-outside-of-kde-session.diff:
  Fixes loading of plugins outside of KDE sessions although the
  plugins are installed in the KDE dir

- Update to 4.11.1:
  * ECMGeneratePriFile now correctly uses KDE_USE_QT_SYS_PATHS
  * Include directory in the pri file is now using the correct path
- Drop 0001-Remove-phonon-from-the-include-directory.patch, merged
  upstream
- Use %lang_package macro and provide phonon4qt5 to fulfill its
  dependencies

- Add 0001-Remove-phonon-from-the-include-directory.patch

- Add designer plugin directory to directories owned by the devel
  package, as libqt5-qttools is no longer pulled in.

- Update to 4.11.0:
  * Features
    + New phononsettings application for advanced users to control
    PulseAudio device preference by-category and Phonon backend
    selection. This application is an advanced utility and you
    shouldn't need to visit it if you aren't very certain that
    something needs changing. This replaces the previously
    available System Settings module for Phonon.
  * Changes
    + The backends Phonon VLC 0.11+ or Phonon GStreamer 4.10+ are
    required to build with this version of libphonon! Older
    versions will no longer build because of aggressive clean up
    of legacy compatibility code in the build system.
    + Qt4 support has been removed. Qt5 is now the default. If you
    still need the Qt4 version for whatever reason it's
    recommended that you port to Qt5 quickly seeing as Qt4 is
    getting really long in the tooth. Since the Qt4 and Qt5
    version are fully co-installable you can continue to use
    4.10 for Qt4 while using 4.11 for Qt5 should it be necessary.
    + CMake 3.5 is now required for building
    + Installation paths are now controlled by the KDEInstallDirs
    CMake include instead of the GNUInstallDirs one
    + CCFlag and CMake settings are now shared with other KDE
    software as per the extra-cmake-modules framework
    + PHONON_BUILD_DESCRIPTOR option no longer supported.
    + PHONON_BUILD_DECLARATIVE_PLUGIN option no longer supported.
    It made little to no sense on Qt5.
    + PHONON_INSTALL_QT_COMPAT_HEADERS option no longer supported.
    It made no sense on Qt5.
    + PHONON_NO_DBUS option no longer supported. The DBus interface
    was only used to communicate with the settings interface in
    Plasma, but hasn't been used in many years. This effectively
    removes QtDBus as dependency.
    + PHONON_ASSERT_STATES option no longer supported. The state
    machine is now always enabled unless Q_ASSERTs as a whole are
    disabled (i.e. the build is not a Debug-ish build).
    + PHONON_INSTALL_QT_EXTENSIONS_INTO_SYSTEM_QT option no longer
    supported. Replaced by ECM's KDE_USE_QT_SYS_PATHS.
  * Bug Fixes
    + The default preference of backends is now properly
    implemented. This was previously reversed.

- Fix the -lang package dependency.

- Update to 4.10.3:
  * QFOREACH use was removed in headers when building for Qt 5.
  * Localization has been fixed for the Qt 5 build.
- Add lang subpackage containing the translations

- Update to 4.10.2:
  * PulseAudio support is no longer incorrectly disabled with Qt
    5.12
- Drop 0001-Fix-PulseAudio-support-with-Qt-5.12.patch, merged
  upstream

- Add upstream patch 0001-Fix-PulseAudio-support-with-Qt-5.12.patch
  to fix PulseAudio detection with Qt 5.12
- Run spec-cleaner
- Add %license

- Update to 4.10.1:
  * CMake files are now compatible with Qt 5.11. Note that the
    relevant CMake code is shared with the backends, and thus also
    fixes the compatibility issue there.

- Update to 4.10.0:
  * Changes
    + PulseSupport is more robustly handling device list iteration.
  * New API
    + New backend API AudioOutputInterface410. This interface
    implements a long-existing frontend interface for category
    configuration. Usually, this is managed by the builtin
    PulseSupport to force the category on a PulseAudio level,
    sometimes this may not be possible because of how the backend
    subsystem works and the backend needs to manage this directly.
    + setCategory(Category) is called on the interface when the
    synonymous frontend function is called.

- Update to 4.9.1
  * Changes
  * use cmake variables to check if QtDbus is enabled
  * change eol handling to not trigger static warnings