SUSE Package Hub 15 one-click install
Install perl-Test-InDistDir
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-Standard-Pool
Package Hub 15
Dummy repo - this will fail
-
perl-Test-InDistDir
test environment setup for development with IDE
This module helps run test scripts in IDEs like Komodo.
When running test scripts in an IDE i have to set up a project file
defining the dist dir to run tests in and a lib dir to load additional
modules from. Often I didn't feel like doing that, especially when i only
wanted to do a small patch to a dist. In those cases i added a BEGIN block
to mangle the environment for me.
This module basically is that BEGIN block. It automatically moves up one
directory when it cannot see the test script in "t/$scriptname" and
includes 'lib' in @INC when there's no blib present. That way the test ends
up with almost the same environment it'd get from EUMM/prove/etc., even
when it's actually run inside the t/ directory.
At the same time it will still function correctly when called by
EUMM/prove/etc., since it does not change the environment in those cases.
SUSE Package Hub 15 one-click install
Install perl-Test-InDistDir
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-Standard-Pool
Package Hub 15
Dummy repo - this will fail
-
perl-Test-InDistDir
test environment setup for development with IDE
This module helps run test scripts in IDEs like Komodo.
When running test scripts in an IDE i have to set up a project file
defining the dist dir to run tests in and a lib dir to load additional
modules from. Often I didn't feel like doing that, especially when i only
wanted to do a small patch to a dist. In those cases i added a BEGIN block
to mangle the environment for me.
This module basically is that BEGIN block. It automatically moves up one
directory when it cannot see the test script in "t/$scriptname" and
includes 'lib' in @INC when there's no blib present. That way the test ends
up with almost the same environment it'd get from EUMM/prove/etc., even
when it's actually run inside the t/ directory.
At the same time it will still function correctly when called by
EUMM/prove/etc., since it does not change the environment in those cases.
SUSE Package Hub 15 SP1 one-click install
Install perl-Test-InDistDir
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP1-Backports-Pool
Package Hub 15 SP1
Dummy repo - this will fail
-
perl-Test-InDistDir
test environment setup for development with IDE
This module helps run test scripts in IDEs like Komodo.
When running test scripts in an IDE i have to set up a project file
defining the dist dir to run tests in and a lib dir to load additional
modules from. Often I didn't feel like doing that, especially when i only
wanted to do a small patch to a dist. In those cases i added a BEGIN block
to mangle the environment for me.
This module basically is that BEGIN block. It automatically moves up one
directory when it cannot see the test script in "t/$scriptname" and
includes 'lib' in @INC when there's no blib present. That way the test ends
up with almost the same environment it'd get from EUMM/prove/etc., even
when it's actually run inside the t/ directory.
At the same time it will still function correctly when called by
EUMM/prove/etc., since it does not change the environment in those cases.
SUSE Package Hub 15 SP1 one-click install
Install perl-Test-InDistDir
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP1-Backports-Pool
Package Hub 15 SP1
Dummy repo - this will fail
-
perl-Test-InDistDir
test environment setup for development with IDE
This module helps run test scripts in IDEs like Komodo.
When running test scripts in an IDE i have to set up a project file
defining the dist dir to run tests in and a lib dir to load additional
modules from. Often I didn't feel like doing that, especially when i only
wanted to do a small patch to a dist. In those cases i added a BEGIN block
to mangle the environment for me.
This module basically is that BEGIN block. It automatically moves up one
directory when it cannot see the test script in "t/$scriptname" and
includes 'lib' in @INC when there's no blib present. That way the test ends
up with almost the same environment it'd get from EUMM/prove/etc., even
when it's actually run inside the t/ directory.
At the same time it will still function correctly when called by
EUMM/prove/etc., since it does not change the environment in those cases.
SUSE Package Hub 15 SP2 one-click install
Install perl-Test-InDistDir
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP2-Backports-Pool
Package Hub 15 SP2
Dummy repo - this will fail
-
perl-Test-InDistDir
test environment setup for development with IDE
This module helps run test scripts in IDEs like Komodo.
When running test scripts in an IDE i have to set up a project file
defining the dist dir to run tests in and a lib dir to load additional
modules from. Often I didn't feel like doing that, especially when i only
wanted to do a small patch to a dist. In those cases i added a BEGIN block
to mangle the environment for me.
This module basically is that BEGIN block. It automatically moves up one
directory when it cannot see the test script in "t/$scriptname" and
includes 'lib' in @INC when there's no blib present. That way the test ends
up with almost the same environment it'd get from EUMM/prove/etc., even
when it's actually run inside the t/ directory.
At the same time it will still function correctly when called by
EUMM/prove/etc., since it does not change the environment in those cases.
SUSE Package Hub 15 SP2 one-click install
Install perl-Test-InDistDir
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP2-Backports-Pool
Package Hub 15 SP2
Dummy repo - this will fail
-
perl-Test-InDistDir
test environment setup for development with IDE
This module helps run test scripts in IDEs like Komodo.
When running test scripts in an IDE i have to set up a project file
defining the dist dir to run tests in and a lib dir to load additional
modules from. Often I didn't feel like doing that, especially when i only
wanted to do a small patch to a dist. In those cases i added a BEGIN block
to mangle the environment for me.
This module basically is that BEGIN block. It automatically moves up one
directory when it cannot see the test script in "t/$scriptname" and
includes 'lib' in @INC when there's no blib present. That way the test ends
up with almost the same environment it'd get from EUMM/prove/etc., even
when it's actually run inside the t/ directory.
At the same time it will still function correctly when called by
EUMM/prove/etc., since it does not change the environment in those cases.
SUSE Package Hub 15 SP3 one-click install
Install perl-Test-InDistDir
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP3-Backports-Pool
Package Hub 15 SP3
Dummy repo - this will fail
-
perl-Test-InDistDir
test environment setup for development with IDE
This module helps run test scripts in IDEs like Komodo.
When running test scripts in an IDE i have to set up a project file
defining the dist dir to run tests in and a lib dir to load additional
modules from. Often I didn't feel like doing that, especially when i only
wanted to do a small patch to a dist. In those cases i added a BEGIN block
to mangle the environment for me.
This module basically is that BEGIN block. It automatically moves up one
directory when it cannot see the test script in "t/$scriptname" and
includes 'lib' in @INC when there's no blib present. That way the test ends
up with almost the same environment it'd get from EUMM/prove/etc., even
when it's actually run inside the t/ directory.
At the same time it will still function correctly when called by
EUMM/prove/etc., since it does not change the environment in those cases.
SUSE Package Hub 15 SP3 one-click install
Install perl-Test-InDistDir
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP3-Backports-Pool
Package Hub 15 SP3
Dummy repo - this will fail
-
perl-Test-InDistDir
test environment setup for development with IDE
This module helps run test scripts in IDEs like Komodo.
When running test scripts in an IDE i have to set up a project file
defining the dist dir to run tests in and a lib dir to load additional
modules from. Often I didn't feel like doing that, especially when i only
wanted to do a small patch to a dist. In those cases i added a BEGIN block
to mangle the environment for me.
This module basically is that BEGIN block. It automatically moves up one
directory when it cannot see the test script in "t/$scriptname" and
includes 'lib' in @INC when there's no blib present. That way the test ends
up with almost the same environment it'd get from EUMM/prove/etc., even
when it's actually run inside the t/ directory.
At the same time it will still function correctly when called by
EUMM/prove/etc., since it does not change the environment in those cases.
SUSE Package Hub 15 SP4 one-click install
Install perl-Test-InDistDir
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP4-Backports-Pool
Package Hub 15 SP4
Dummy repo - this will fail
-
perl-Test-InDistDir
test environment setup for development with IDE
This module helps run test scripts in IDEs like Komodo.
When running test scripts in an IDE i have to set up a project file
defining the dist dir to run tests in and a lib dir to load additional
modules from. Often I didn't feel like doing that, especially when i only
wanted to do a small patch to a dist. In those cases i added a BEGIN block
to mangle the environment for me.
This module basically is that BEGIN block. It automatically moves up one
directory when it cannot see the test script in "t/$scriptname" and
includes 'lib' in @INC when there's no blib present. That way the test ends
up with almost the same environment it'd get from EUMM/prove/etc., even
when it's actually run inside the t/ directory.
At the same time it will still function correctly when called by
EUMM/prove/etc., since it does not change the environment in those cases.
SUSE Package Hub 15 SP4 one-click install
Install perl-Test-InDistDir
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP4-Backports-Pool
Package Hub 15 SP4
Dummy repo - this will fail
-
perl-Test-InDistDir
test environment setup for development with IDE
This module helps run test scripts in IDEs like Komodo.
When running test scripts in an IDE i have to set up a project file
defining the dist dir to run tests in and a lib dir to load additional
modules from. Often I didn't feel like doing that, especially when i only
wanted to do a small patch to a dist. In those cases i added a BEGIN block
to mangle the environment for me.
This module basically is that BEGIN block. It automatically moves up one
directory when it cannot see the test script in "t/$scriptname" and
includes 'lib' in @INC when there's no blib present. That way the test ends
up with almost the same environment it'd get from EUMM/prove/etc., even
when it's actually run inside the t/ directory.
At the same time it will still function correctly when called by
EUMM/prove/etc., since it does not change the environment in those cases.
SUSE Package Hub 15 SP5 one-click install
Install perl-Test-InDistDir
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP5-Standard-Pool
Package Hub 15 SP5
Dummy repo - this will fail
-
perl-Test-InDistDir
test environment setup for development with IDE
This module helps run test scripts in IDEs like Komodo.
When running test scripts in an IDE i have to set up a project file
defining the dist dir to run tests in and a lib dir to load additional
modules from. Often I didn't feel like doing that, especially when i only
wanted to do a small patch to a dist. In those cases i added a BEGIN block
to mangle the environment for me.
This module basically is that BEGIN block. It automatically moves up one
directory when it cannot see the test script in "t/$scriptname" and
includes 'lib' in @INC when there's no blib present. That way the test ends
up with almost the same environment it'd get from EUMM/prove/etc., even
when it's actually run inside the t/ directory.
At the same time it will still function correctly when called by
EUMM/prove/etc., since it does not change the environment in those cases.
SUSE Package Hub 15 SP5 one-click install
Install perl-Test-InDistDir
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP5-Standard-Pool
Package Hub 15 SP5
Dummy repo - this will fail
-
perl-Test-InDistDir
test environment setup for development with IDE
This module helps run test scripts in IDEs like Komodo.
When running test scripts in an IDE i have to set up a project file
defining the dist dir to run tests in and a lib dir to load additional
modules from. Often I didn't feel like doing that, especially when i only
wanted to do a small patch to a dist. In those cases i added a BEGIN block
to mangle the environment for me.
This module basically is that BEGIN block. It automatically moves up one
directory when it cannot see the test script in "t/$scriptname" and
includes 'lib' in @INC when there's no blib present. That way the test ends
up with almost the same environment it'd get from EUMM/prove/etc., even
when it's actually run inside the t/ directory.
At the same time it will still function correctly when called by
EUMM/prove/etc., since it does not change the environment in those cases.