SUSE Package Hub 15 one-click install Install perl-Math-ConvexHull NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-Standard-Pool Package Hub 15 Dummy repo - this will fail perl-Math-ConvexHull Calculate convex hulls using Graham's scan (n*log(n)) 'Math::ConvexHull' is a simple module that calculates convex hulls from a set of points in 2D space. It is a straightforward implementation of the algorithm known as Graham's scan which, with complexity of O(n*log(n)), is the fastest known method of finding the convex hull of an arbitrary set of points. There are some methods of eliminating points that cannot be part of the convex hull. These may or may not be implemented in a future version. The implementation cannot deal with duplicate points. Therefore, points which are very, very close (think floating point close) to the previous point are dropped since version 1.02 of the module. However, if you pass in randomly ordered data which contains duplicate points, this safety measure might not help you. In that case, you will have to remove duplicates yourself. SUSE Package Hub 15 one-click install Install perl-Math-ConvexHull NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-Standard-Pool Package Hub 15 Dummy repo - this will fail perl-Math-ConvexHull Calculate convex hulls using Graham's scan (n*log(n)) 'Math::ConvexHull' is a simple module that calculates convex hulls from a set of points in 2D space. It is a straightforward implementation of the algorithm known as Graham's scan which, with complexity of O(n*log(n)), is the fastest known method of finding the convex hull of an arbitrary set of points. There are some methods of eliminating points that cannot be part of the convex hull. These may or may not be implemented in a future version. The implementation cannot deal with duplicate points. Therefore, points which are very, very close (think floating point close) to the previous point are dropped since version 1.02 of the module. However, if you pass in randomly ordered data which contains duplicate points, this safety measure might not help you. In that case, you will have to remove duplicates yourself. SUSE Package Hub 15 SP1 one-click install Install perl-Math-ConvexHull NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP1-Backports-Pool Package Hub 15 SP1 Dummy repo - this will fail perl-Math-ConvexHull Calculate convex hulls using Graham's scan (n*log(n)) 'Math::ConvexHull' is a simple module that calculates convex hulls from a set of points in 2D space. It is a straightforward implementation of the algorithm known as Graham's scan which, with complexity of O(n*log(n)), is the fastest known method of finding the convex hull of an arbitrary set of points. There are some methods of eliminating points that cannot be part of the convex hull. These may or may not be implemented in a future version. The implementation cannot deal with duplicate points. Therefore, points which are very, very close (think floating point close) to the previous point are dropped since version 1.02 of the module. However, if you pass in randomly ordered data which contains duplicate points, this safety measure might not help you. In that case, you will have to remove duplicates yourself. SUSE Package Hub 15 SP1 one-click install Install perl-Math-ConvexHull NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP1-Backports-Pool Package Hub 15 SP1 Dummy repo - this will fail perl-Math-ConvexHull Calculate convex hulls using Graham's scan (n*log(n)) 'Math::ConvexHull' is a simple module that calculates convex hulls from a set of points in 2D space. It is a straightforward implementation of the algorithm known as Graham's scan which, with complexity of O(n*log(n)), is the fastest known method of finding the convex hull of an arbitrary set of points. There are some methods of eliminating points that cannot be part of the convex hull. These may or may not be implemented in a future version. The implementation cannot deal with duplicate points. Therefore, points which are very, very close (think floating point close) to the previous point are dropped since version 1.02 of the module. However, if you pass in randomly ordered data which contains duplicate points, this safety measure might not help you. In that case, you will have to remove duplicates yourself. SUSE Package Hub 15 SP2 one-click install Install perl-Math-ConvexHull NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP2-Backports-Pool Package Hub 15 SP2 Dummy repo - this will fail perl-Math-ConvexHull Calculate convex hulls using Graham's scan (n*log(n)) 'Math::ConvexHull' is a simple module that calculates convex hulls from a set of points in 2D space. It is a straightforward implementation of the algorithm known as Graham's scan which, with complexity of O(n*log(n)), is the fastest known method of finding the convex hull of an arbitrary set of points. There are some methods of eliminating points that cannot be part of the convex hull. These may or may not be implemented in a future version. The implementation cannot deal with duplicate points. Therefore, points which are very, very close (think floating point close) to the previous point are dropped since version 1.02 of the module. However, if you pass in randomly ordered data which contains duplicate points, this safety measure might not help you. In that case, you will have to remove duplicates yourself. SUSE Package Hub 15 SP2 one-click install Install perl-Math-ConvexHull NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP2-Backports-Pool Package Hub 15 SP2 Dummy repo - this will fail perl-Math-ConvexHull Calculate convex hulls using Graham's scan (n*log(n)) 'Math::ConvexHull' is a simple module that calculates convex hulls from a set of points in 2D space. It is a straightforward implementation of the algorithm known as Graham's scan which, with complexity of O(n*log(n)), is the fastest known method of finding the convex hull of an arbitrary set of points. There are some methods of eliminating points that cannot be part of the convex hull. These may or may not be implemented in a future version. The implementation cannot deal with duplicate points. Therefore, points which are very, very close (think floating point close) to the previous point are dropped since version 1.02 of the module. However, if you pass in randomly ordered data which contains duplicate points, this safety measure might not help you. In that case, you will have to remove duplicates yourself. SUSE Package Hub 15 SP3 one-click install Install perl-Math-ConvexHull NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP3-Backports-Pool Package Hub 15 SP3 Dummy repo - this will fail perl-Math-ConvexHull Calculate convex hulls using Graham's scan (n*log(n)) 'Math::ConvexHull' is a simple module that calculates convex hulls from a set of points in 2D space. It is a straightforward implementation of the algorithm known as Graham's scan which, with complexity of O(n*log(n)), is the fastest known method of finding the convex hull of an arbitrary set of points. There are some methods of eliminating points that cannot be part of the convex hull. These may or may not be implemented in a future version. The implementation cannot deal with duplicate points. Therefore, points which are very, very close (think floating point close) to the previous point are dropped since version 1.02 of the module. However, if you pass in randomly ordered data which contains duplicate points, this safety measure might not help you. In that case, you will have to remove duplicates yourself. SUSE Package Hub 15 SP3 one-click install Install perl-Math-ConvexHull NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP3-Backports-Pool Package Hub 15 SP3 Dummy repo - this will fail perl-Math-ConvexHull Calculate convex hulls using Graham's scan (n*log(n)) 'Math::ConvexHull' is a simple module that calculates convex hulls from a set of points in 2D space. It is a straightforward implementation of the algorithm known as Graham's scan which, with complexity of O(n*log(n)), is the fastest known method of finding the convex hull of an arbitrary set of points. There are some methods of eliminating points that cannot be part of the convex hull. These may or may not be implemented in a future version. The implementation cannot deal with duplicate points. Therefore, points which are very, very close (think floating point close) to the previous point are dropped since version 1.02 of the module. However, if you pass in randomly ordered data which contains duplicate points, this safety measure might not help you. In that case, you will have to remove duplicates yourself. SUSE Package Hub 15 SP4 one-click install Install perl-Math-ConvexHull NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP4-Backports-Pool Package Hub 15 SP4 Dummy repo - this will fail perl-Math-ConvexHull Calculate convex hulls using Graham's scan (n*log(n)) 'Math::ConvexHull' is a simple module that calculates convex hulls from a set of points in 2D space. It is a straightforward implementation of the algorithm known as Graham's scan which, with complexity of O(n*log(n)), is the fastest known method of finding the convex hull of an arbitrary set of points. There are some methods of eliminating points that cannot be part of the convex hull. These may or may not be implemented in a future version. The implementation cannot deal with duplicate points. Therefore, points which are very, very close (think floating point close) to the previous point are dropped since version 1.02 of the module. However, if you pass in randomly ordered data which contains duplicate points, this safety measure might not help you. In that case, you will have to remove duplicates yourself. SUSE Package Hub 15 SP4 one-click install Install perl-Math-ConvexHull NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP4-Backports-Pool Package Hub 15 SP4 Dummy repo - this will fail perl-Math-ConvexHull Calculate convex hulls using Graham's scan (n*log(n)) 'Math::ConvexHull' is a simple module that calculates convex hulls from a set of points in 2D space. It is a straightforward implementation of the algorithm known as Graham's scan which, with complexity of O(n*log(n)), is the fastest known method of finding the convex hull of an arbitrary set of points. There are some methods of eliminating points that cannot be part of the convex hull. These may or may not be implemented in a future version. The implementation cannot deal with duplicate points. Therefore, points which are very, very close (think floating point close) to the previous point are dropped since version 1.02 of the module. However, if you pass in randomly ordered data which contains duplicate points, this safety measure might not help you. In that case, you will have to remove duplicates yourself. SUSE Package Hub 15 SP5 one-click install Install perl-Math-ConvexHull NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP5-Standard-Pool Package Hub 15 SP5 Dummy repo - this will fail perl-Math-ConvexHull Calculate convex hulls using Graham's scan (n*log(n)) 'Math::ConvexHull' is a simple module that calculates convex hulls from a set of points in 2D space. It is a straightforward implementation of the algorithm known as Graham's scan which, with complexity of O(n*log(n)), is the fastest known method of finding the convex hull of an arbitrary set of points. There are some methods of eliminating points that cannot be part of the convex hull. These may or may not be implemented in a future version. The implementation cannot deal with duplicate points. Therefore, points which are very, very close (think floating point close) to the previous point are dropped since version 1.02 of the module. However, if you pass in randomly ordered data which contains duplicate points, this safety measure might not help you. In that case, you will have to remove duplicates yourself. SUSE Package Hub 15 SP5 one-click install Install perl-Math-ConvexHull NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP5-Standard-Pool Package Hub 15 SP5 Dummy repo - this will fail perl-Math-ConvexHull Calculate convex hulls using Graham's scan (n*log(n)) 'Math::ConvexHull' is a simple module that calculates convex hulls from a set of points in 2D space. It is a straightforward implementation of the algorithm known as Graham's scan which, with complexity of O(n*log(n)), is the fastest known method of finding the convex hull of an arbitrary set of points. There are some methods of eliminating points that cannot be part of the convex hull. These may or may not be implemented in a future version. The implementation cannot deal with duplicate points. Therefore, points which are very, very close (think floating point close) to the previous point are dropped since version 1.02 of the module. However, if you pass in randomly ordered data which contains duplicate points, this safety measure might not help you. In that case, you will have to remove duplicates yourself.