SUSE Package Hub 15 one-click install
Install perl-Apache-Filter
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-Standard-Pool
Package Hub 15
Dummy repo - this will fail
-
perl-Apache-Filter
Alter the output of previous handlers
In basic operation, each of the handlers Filter1, Filter2, and Filter3
will make a call to $r->filter_input(), which will return a filehandle.
For Filter1, the filehandle points to the requested file. For Filter2,
the filehandle contains whatever Filter1 wrote to STDOUT. For Filter3,
it contains whatever Filter3 wrote to STDOUT. The output of Filter3
goes directly to the browser.
Note that the modules Filter1, Filter2, and Filter3 are listed in
forward order, in contrast to the reverse-order listing of
Apache::OutputChain.
When you've got this module, you can use the same handler both as a
stand-alone handler, and as an element in a chain. Just make sure that
whenever you're chaining, all the handlers in the chain are "Filter-
aware," i.e. they each call $r->filter_register() exactly once, before
they start printing to STDOUT. There should be almost no overhead for
doing this when there's only one element in the chain.
SUSE Package Hub 15 one-click install
Install perl-Apache-Filter
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-Standard-Pool
Package Hub 15
Dummy repo - this will fail
-
perl-Apache-Filter
Alter the output of previous handlers
In basic operation, each of the handlers Filter1, Filter2, and Filter3
will make a call to $r->filter_input(), which will return a filehandle.
For Filter1, the filehandle points to the requested file. For Filter2,
the filehandle contains whatever Filter1 wrote to STDOUT. For Filter3,
it contains whatever Filter3 wrote to STDOUT. The output of Filter3
goes directly to the browser.
Note that the modules Filter1, Filter2, and Filter3 are listed in
forward order, in contrast to the reverse-order listing of
Apache::OutputChain.
When you've got this module, you can use the same handler both as a
stand-alone handler, and as an element in a chain. Just make sure that
whenever you're chaining, all the handlers in the chain are "Filter-
aware," i.e. they each call $r->filter_register() exactly once, before
they start printing to STDOUT. There should be almost no overhead for
doing this when there's only one element in the chain.
SUSE Package Hub 15 SP1 one-click install
Install perl-Apache-Filter
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP1-Backports-Pool
Package Hub 15 SP1
Dummy repo - this will fail
-
perl-Apache-Filter
Alter the output of previous handlers
In basic operation, each of the handlers Filter1, Filter2, and Filter3
will make a call to $r->filter_input(), which will return a filehandle.
For Filter1, the filehandle points to the requested file. For Filter2,
the filehandle contains whatever Filter1 wrote to STDOUT. For Filter3,
it contains whatever Filter3 wrote to STDOUT. The output of Filter3
goes directly to the browser.
Note that the modules Filter1, Filter2, and Filter3 are listed in
forward order, in contrast to the reverse-order listing of
Apache::OutputChain.
When you've got this module, you can use the same handler both as a
stand-alone handler, and as an element in a chain. Just make sure that
whenever you're chaining, all the handlers in the chain are "Filter-
aware," i.e. they each call $r->filter_register() exactly once, before
they start printing to STDOUT. There should be almost no overhead for
doing this when there's only one element in the chain.
SUSE Package Hub 15 SP1 one-click install
Install perl-Apache-Filter
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP1-Backports-Pool
Package Hub 15 SP1
Dummy repo - this will fail
-
perl-Apache-Filter
Alter the output of previous handlers
In basic operation, each of the handlers Filter1, Filter2, and Filter3
will make a call to $r->filter_input(), which will return a filehandle.
For Filter1, the filehandle points to the requested file. For Filter2,
the filehandle contains whatever Filter1 wrote to STDOUT. For Filter3,
it contains whatever Filter3 wrote to STDOUT. The output of Filter3
goes directly to the browser.
Note that the modules Filter1, Filter2, and Filter3 are listed in
forward order, in contrast to the reverse-order listing of
Apache::OutputChain.
When you've got this module, you can use the same handler both as a
stand-alone handler, and as an element in a chain. Just make sure that
whenever you're chaining, all the handlers in the chain are "Filter-
aware," i.e. they each call $r->filter_register() exactly once, before
they start printing to STDOUT. There should be almost no overhead for
doing this when there's only one element in the chain.
SUSE Package Hub 15 SP2 one-click install
Install perl-Apache-Filter
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP2-Backports-Pool
Package Hub 15 SP2
Dummy repo - this will fail
-
perl-Apache-Filter
Alter the output of previous handlers
In basic operation, each of the handlers Filter1, Filter2, and Filter3
will make a call to $r->filter_input(), which will return a filehandle.
For Filter1, the filehandle points to the requested file. For Filter2,
the filehandle contains whatever Filter1 wrote to STDOUT. For Filter3,
it contains whatever Filter3 wrote to STDOUT. The output of Filter3
goes directly to the browser.
Note that the modules Filter1, Filter2, and Filter3 are listed in
forward order, in contrast to the reverse-order listing of
Apache::OutputChain.
When you've got this module, you can use the same handler both as a
stand-alone handler, and as an element in a chain. Just make sure that
whenever you're chaining, all the handlers in the chain are "Filter-
aware," i.e. they each call $r->filter_register() exactly once, before
they start printing to STDOUT. There should be almost no overhead for
doing this when there's only one element in the chain.
SUSE Package Hub 15 SP2 one-click install
Install perl-Apache-Filter
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP2-Backports-Pool
Package Hub 15 SP2
Dummy repo - this will fail
-
perl-Apache-Filter
Alter the output of previous handlers
In basic operation, each of the handlers Filter1, Filter2, and Filter3
will make a call to $r->filter_input(), which will return a filehandle.
For Filter1, the filehandle points to the requested file. For Filter2,
the filehandle contains whatever Filter1 wrote to STDOUT. For Filter3,
it contains whatever Filter3 wrote to STDOUT. The output of Filter3
goes directly to the browser.
Note that the modules Filter1, Filter2, and Filter3 are listed in
forward order, in contrast to the reverse-order listing of
Apache::OutputChain.
When you've got this module, you can use the same handler both as a
stand-alone handler, and as an element in a chain. Just make sure that
whenever you're chaining, all the handlers in the chain are "Filter-
aware," i.e. they each call $r->filter_register() exactly once, before
they start printing to STDOUT. There should be almost no overhead for
doing this when there's only one element in the chain.
SUSE Package Hub 15 SP3 one-click install
Install perl-Apache-Filter
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP3-Backports-Pool
Package Hub 15 SP3
Dummy repo - this will fail
-
perl-Apache-Filter
Alter the output of previous handlers
In basic operation, each of the handlers Filter1, Filter2, and Filter3
will make a call to $r->filter_input(), which will return a filehandle.
For Filter1, the filehandle points to the requested file. For Filter2,
the filehandle contains whatever Filter1 wrote to STDOUT. For Filter3,
it contains whatever Filter3 wrote to STDOUT. The output of Filter3
goes directly to the browser.
Note that the modules Filter1, Filter2, and Filter3 are listed in
forward order, in contrast to the reverse-order listing of
Apache::OutputChain.
When you've got this module, you can use the same handler both as a
stand-alone handler, and as an element in a chain. Just make sure that
whenever you're chaining, all the handlers in the chain are "Filter-
aware," i.e. they each call $r->filter_register() exactly once, before
they start printing to STDOUT. There should be almost no overhead for
doing this when there's only one element in the chain.
SUSE Package Hub 15 SP3 one-click install
Install perl-Apache-Filter
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP3-Backports-Pool
Package Hub 15 SP3
Dummy repo - this will fail
-
perl-Apache-Filter
Alter the output of previous handlers
In basic operation, each of the handlers Filter1, Filter2, and Filter3
will make a call to $r->filter_input(), which will return a filehandle.
For Filter1, the filehandle points to the requested file. For Filter2,
the filehandle contains whatever Filter1 wrote to STDOUT. For Filter3,
it contains whatever Filter3 wrote to STDOUT. The output of Filter3
goes directly to the browser.
Note that the modules Filter1, Filter2, and Filter3 are listed in
forward order, in contrast to the reverse-order listing of
Apache::OutputChain.
When you've got this module, you can use the same handler both as a
stand-alone handler, and as an element in a chain. Just make sure that
whenever you're chaining, all the handlers in the chain are "Filter-
aware," i.e. they each call $r->filter_register() exactly once, before
they start printing to STDOUT. There should be almost no overhead for
doing this when there's only one element in the chain.
SUSE Package Hub 15 SP4 one-click install
Install perl-Apache-Filter
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP4-Backports-Pool
Package Hub 15 SP4
Dummy repo - this will fail
-
perl-Apache-Filter
Alter the output of previous handlers
In basic operation, each of the handlers Filter1, Filter2, and Filter3
will make a call to $r->filter_input(), which will return a filehandle.
For Filter1, the filehandle points to the requested file. For Filter2,
the filehandle contains whatever Filter1 wrote to STDOUT. For Filter3,
it contains whatever Filter3 wrote to STDOUT. The output of Filter3
goes directly to the browser.
Note that the modules Filter1, Filter2, and Filter3 are listed in
forward order, in contrast to the reverse-order listing of
Apache::OutputChain.
When you've got this module, you can use the same handler both as a
stand-alone handler, and as an element in a chain. Just make sure that
whenever you're chaining, all the handlers in the chain are "Filter-
aware," i.e. they each call $r->filter_register() exactly once, before
they start printing to STDOUT. There should be almost no overhead for
doing this when there's only one element in the chain.
SUSE Package Hub 15 SP4 one-click install
Install perl-Apache-Filter
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP4-Backports-Pool
Package Hub 15 SP4
Dummy repo - this will fail
-
perl-Apache-Filter
Alter the output of previous handlers
In basic operation, each of the handlers Filter1, Filter2, and Filter3
will make a call to $r->filter_input(), which will return a filehandle.
For Filter1, the filehandle points to the requested file. For Filter2,
the filehandle contains whatever Filter1 wrote to STDOUT. For Filter3,
it contains whatever Filter3 wrote to STDOUT. The output of Filter3
goes directly to the browser.
Note that the modules Filter1, Filter2, and Filter3 are listed in
forward order, in contrast to the reverse-order listing of
Apache::OutputChain.
When you've got this module, you can use the same handler both as a
stand-alone handler, and as an element in a chain. Just make sure that
whenever you're chaining, all the handlers in the chain are "Filter-
aware," i.e. they each call $r->filter_register() exactly once, before
they start printing to STDOUT. There should be almost no overhead for
doing this when there's only one element in the chain.
SUSE Package Hub 15 SP5 one-click install
Install perl-Apache-Filter
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP5-Standard-Pool
Package Hub 15 SP5
Dummy repo - this will fail
-
perl-Apache-Filter
Alter the output of previous handlers
In basic operation, each of the handlers Filter1, Filter2, and Filter3
will make a call to $r->filter_input(), which will return a filehandle.
For Filter1, the filehandle points to the requested file. For Filter2,
the filehandle contains whatever Filter1 wrote to STDOUT. For Filter3,
it contains whatever Filter3 wrote to STDOUT. The output of Filter3
goes directly to the browser.
Note that the modules Filter1, Filter2, and Filter3 are listed in
forward order, in contrast to the reverse-order listing of
Apache::OutputChain.
When you've got this module, you can use the same handler both as a
stand-alone handler, and as an element in a chain. Just make sure that
whenever you're chaining, all the handlers in the chain are "Filter-
aware," i.e. they each call $r->filter_register() exactly once, before
they start printing to STDOUT. There should be almost no overhead for
doing this when there's only one element in the chain.
SUSE Package Hub 15 SP5 one-click install
Install perl-Apache-Filter
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP5-Standard-Pool
Package Hub 15 SP5
Dummy repo - this will fail
-
perl-Apache-Filter
Alter the output of previous handlers
In basic operation, each of the handlers Filter1, Filter2, and Filter3
will make a call to $r->filter_input(), which will return a filehandle.
For Filter1, the filehandle points to the requested file. For Filter2,
the filehandle contains whatever Filter1 wrote to STDOUT. For Filter3,
it contains whatever Filter3 wrote to STDOUT. The output of Filter3
goes directly to the browser.
Note that the modules Filter1, Filter2, and Filter3 are listed in
forward order, in contrast to the reverse-order listing of
Apache::OutputChain.
When you've got this module, you can use the same handler both as a
stand-alone handler, and as an element in a chain. Just make sure that
whenever you're chaining, all the handlers in the chain are "Filter-
aware," i.e. they each call $r->filter_register() exactly once, before
they start printing to STDOUT. There should be almost no overhead for
doing this when there's only one element in the chain.