SUSE Package Hub 15 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-Standard-Pool Package Hub 15 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 15 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-Standard-Pool Package Hub 15 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 15 SP1 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP1-Backports-Pool Package Hub 15 SP1 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 15 SP1 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP1-Backports-Pool Package Hub 15 SP1 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 15 SP2 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP2-Backports-Pool Package Hub 15 SP2 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 15 SP2 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP2-Backports-Pool Package Hub 15 SP2 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 15 SP3 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP3-Backports-Pool Package Hub 15 SP3 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 15 SP3 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP3-Backports-Pool Package Hub 15 SP3 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 15 SP4 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP4-Backports-Pool Package Hub 15 SP4 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 15 SP4 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP4-Backports-Pool Package Hub 15 SP4 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 15 SP5 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP5-Standard-Pool Package Hub 15 SP5 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 15 SP5 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP5-Standard-Pool Package Hub 15 SP5 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 15 SP6 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP6-Standard-Pool Package Hub 15 SP6 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 15 SP6 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP6-Standard-Pool Package Hub 15 SP6 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 15 SP7 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP7-Standard-Pool Package Hub 15 SP7 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 15 SP7 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-15-SP7-Standard-Pool Package Hub 15 SP7 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 16.0 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-16.0-Standard-Pool Package Hub 16.0 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse SUSE Package Hub 16.0 one-click install Install lomoco NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled. See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension If the extension is not enabled, this installation will fail while trying to enable an invalid repo. This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered. SUSE-PackageHub-16.0-Standard-Pool Package Hub 16.0 Dummy repo - this will fail lomoco Tool for setting the special features of some Logitech mice lomoco can configure vendor-specific options on Logitech USB mice (or dual-personality mice plugged into the USB port). A number of recent devices are supported. The program is mostly useful in setting the resolution to 800 cpi on mice that boot at 400 cpi (such as the MX-500), and disabling SmartScroll or Cruise Control for those who would rather use the two extra buttons as ordinary mouse buttons. You can configure which features should be enabled in /etc/sysconfig/logitech_mouse