SUSE Package Hub 15 one-click install
Install git-sync
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-Standard-Pool
Package Hub 15
Dummy repo - this will fail
-
git-sync
Safe and simple one-script git synchronization
Suppose you have a set of text files you care about, multiple machines
to work on, and a central git repository (a.k.a. bare reporitory) at
your disposal. You do not care about atomic commits, but coarse
versioning and backup is grave. For example, server configuration or
org-mode files.
In that case, git-sync will help you keep things in sync.
Unlike the myriad of scripts to do just that already available,
it follows the KISS principle: It is safe, small, requires nothing but
git and bash, but does not even try to shield you from git. It is
non-interactive, but will cautiously exit with a useful hint or error
if there is any kind of problem.
It is ultimately intended for git-savy people. As a rule of thumb, if
you know how to complete a failed rebase, you're fine.
Tested on msysgit and a real bash. In case you know bash scripting, it
will probably make your eyes bleed, but for some reason it works.
SUSE Package Hub 15 one-click install
Install git-sync
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-Standard-Pool
Package Hub 15
Dummy repo - this will fail
-
git-sync
Safe and simple one-script git synchronization
Suppose you have a set of text files you care about, multiple machines
to work on, and a central git repository (a.k.a. bare reporitory) at
your disposal. You do not care about atomic commits, but coarse
versioning and backup is grave. For example, server configuration or
org-mode files.
In that case, git-sync will help you keep things in sync.
Unlike the myriad of scripts to do just that already available,
it follows the KISS principle: It is safe, small, requires nothing but
git and bash, but does not even try to shield you from git. It is
non-interactive, but will cautiously exit with a useful hint or error
if there is any kind of problem.
It is ultimately intended for git-savy people. As a rule of thumb, if
you know how to complete a failed rebase, you're fine.
Tested on msysgit and a real bash. In case you know bash scripting, it
will probably make your eyes bleed, but for some reason it works.
SUSE Package Hub 15 SP1 one-click install
Install git-sync
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP1-Backports-Pool
Package Hub 15 SP1
Dummy repo - this will fail
-
git-sync
Safe and simple one-script git synchronization
Suppose you have a set of text files you care about, multiple machines
to work on, and a central git repository (a.k.a. bare reporitory) at
your disposal. You do not care about atomic commits, but coarse
versioning and backup is grave. For example, server configuration or
org-mode files.
In that case, git-sync will help you keep things in sync.
Unlike the myriad of scripts to do just that already available,
it follows the KISS principle: It is safe, small, requires nothing but
git and bash, but does not even try to shield you from git. It is
non-interactive, but will cautiously exit with a useful hint or error
if there is any kind of problem.
It is ultimately intended for git-savy people. As a rule of thumb, if
you know how to complete a failed rebase, you're fine.
Tested on msysgit and a real bash. In case you know bash scripting, it
will probably make your eyes bleed, but for some reason it works.
SUSE Package Hub 15 SP1 one-click install
Install git-sync
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP1-Backports-Pool
Package Hub 15 SP1
Dummy repo - this will fail
-
git-sync
Safe and simple one-script git synchronization
Suppose you have a set of text files you care about, multiple machines
to work on, and a central git repository (a.k.a. bare reporitory) at
your disposal. You do not care about atomic commits, but coarse
versioning and backup is grave. For example, server configuration or
org-mode files.
In that case, git-sync will help you keep things in sync.
Unlike the myriad of scripts to do just that already available,
it follows the KISS principle: It is safe, small, requires nothing but
git and bash, but does not even try to shield you from git. It is
non-interactive, but will cautiously exit with a useful hint or error
if there is any kind of problem.
It is ultimately intended for git-savy people. As a rule of thumb, if
you know how to complete a failed rebase, you're fine.
Tested on msysgit and a real bash. In case you know bash scripting, it
will probably make your eyes bleed, but for some reason it works.
SUSE Package Hub 15 SP2 one-click install
Install git-sync
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP2-Backports-Pool
Package Hub 15 SP2
Dummy repo - this will fail
-
git-sync
Safe and simple one-script git synchronization
Suppose you have a set of text files you care about, multiple machines
to work on, and a central git repository (a.k.a. bare reporitory) at
your disposal. You do not care about atomic commits, but coarse
versioning and backup is grave. For example, server configuration or
org-mode files.
In that case, git-sync will help you keep things in sync.
Unlike the myriad of scripts to do just that already available,
it follows the KISS principle: It is safe, small, requires nothing but
git and bash, but does not even try to shield you from git. It is
non-interactive, but will cautiously exit with a useful hint or error
if there is any kind of problem.
It is ultimately intended for git-savy people. As a rule of thumb, if
you know how to complete a failed rebase, you're fine.
Tested on msysgit and a real bash. In case you know bash scripting, it
will probably make your eyes bleed, but for some reason it works.
SUSE Package Hub 15 SP2 one-click install
Install git-sync
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP2-Backports-Pool
Package Hub 15 SP2
Dummy repo - this will fail
-
git-sync
Safe and simple one-script git synchronization
Suppose you have a set of text files you care about, multiple machines
to work on, and a central git repository (a.k.a. bare reporitory) at
your disposal. You do not care about atomic commits, but coarse
versioning and backup is grave. For example, server configuration or
org-mode files.
In that case, git-sync will help you keep things in sync.
Unlike the myriad of scripts to do just that already available,
it follows the KISS principle: It is safe, small, requires nothing but
git and bash, but does not even try to shield you from git. It is
non-interactive, but will cautiously exit with a useful hint or error
if there is any kind of problem.
It is ultimately intended for git-savy people. As a rule of thumb, if
you know how to complete a failed rebase, you're fine.
Tested on msysgit and a real bash. In case you know bash scripting, it
will probably make your eyes bleed, but for some reason it works.
SUSE Package Hub 15 SP3 one-click install
Install git-sync
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP3-Backports-Pool
Package Hub 15 SP3
Dummy repo - this will fail
-
git-sync
Safe and simple one-script git synchronization
Suppose you have a set of text files you care about, multiple machines
to work on, and a central git repository (a.k.a. bare reporitory) at
your disposal. You do not care about atomic commits, but coarse
versioning and backup is grave. For example, server configuration or
org-mode files.
In that case, git-sync will help you keep things in sync.
Unlike the myriad of scripts to do just that already available,
it follows the KISS principle: It is safe, small, requires nothing but
git and bash, but does not even try to shield you from git. It is
non-interactive, but will cautiously exit with a useful hint or error
if there is any kind of problem.
It is ultimately intended for git-savy people. As a rule of thumb, if
you know how to complete a failed rebase, you're fine.
Tested on msysgit and a real bash. In case you know bash scripting, it
will probably make your eyes bleed, but for some reason it works.
SUSE Package Hub 15 SP3 one-click install
Install git-sync
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP3-Backports-Pool
Package Hub 15 SP3
Dummy repo - this will fail
-
git-sync
Safe and simple one-script git synchronization
Suppose you have a set of text files you care about, multiple machines
to work on, and a central git repository (a.k.a. bare reporitory) at
your disposal. You do not care about atomic commits, but coarse
versioning and backup is grave. For example, server configuration or
org-mode files.
In that case, git-sync will help you keep things in sync.
Unlike the myriad of scripts to do just that already available,
it follows the KISS principle: It is safe, small, requires nothing but
git and bash, but does not even try to shield you from git. It is
non-interactive, but will cautiously exit with a useful hint or error
if there is any kind of problem.
It is ultimately intended for git-savy people. As a rule of thumb, if
you know how to complete a failed rebase, you're fine.
Tested on msysgit and a real bash. In case you know bash scripting, it
will probably make your eyes bleed, but for some reason it works.
SUSE Package Hub 15 SP4 one-click install
Install git-sync
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP4-Backports-Pool
Package Hub 15 SP4
Dummy repo - this will fail
-
git-sync
Safe and simple one-script git synchronization
Suppose you have a set of text files you care about, multiple machines
to work on, and a central git repository (a.k.a. bare reporitory) at
your disposal. You do not care about atomic commits, but coarse
versioning and backup is grave. For example, server configuration or
org-mode files.
In that case, git-sync will help you keep things in sync.
Unlike the myriad of scripts to do just that already available,
it follows the KISS principle: It is safe, small, requires nothing but
git and bash, but does not even try to shield you from git. It is
non-interactive, but will cautiously exit with a useful hint or error
if there is any kind of problem.
It is ultimately intended for git-savy people. As a rule of thumb, if
you know how to complete a failed rebase, you're fine.
Tested on msysgit and a real bash. In case you know bash scripting, it
will probably make your eyes bleed, but for some reason it works.
SUSE Package Hub 15 SP4 one-click install
Install git-sync
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP4-Backports-Pool
Package Hub 15 SP4
Dummy repo - this will fail
-
git-sync
Safe and simple one-script git synchronization
Suppose you have a set of text files you care about, multiple machines
to work on, and a central git repository (a.k.a. bare reporitory) at
your disposal. You do not care about atomic commits, but coarse
versioning and backup is grave. For example, server configuration or
org-mode files.
In that case, git-sync will help you keep things in sync.
Unlike the myriad of scripts to do just that already available,
it follows the KISS principle: It is safe, small, requires nothing but
git and bash, but does not even try to shield you from git. It is
non-interactive, but will cautiously exit with a useful hint or error
if there is any kind of problem.
It is ultimately intended for git-savy people. As a rule of thumb, if
you know how to complete a failed rebase, you're fine.
Tested on msysgit and a real bash. In case you know bash scripting, it
will probably make your eyes bleed, but for some reason it works.
SUSE Package Hub 15 SP5 one-click install
Install git-sync
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP5-Standard-Pool
Package Hub 15 SP5
Dummy repo - this will fail
-
git-sync
Safe and simple one-script git synchronization
Suppose you have a set of text files you care about, multiple machines
to work on, and a central git repository (a.k.a. bare reporitory) at
your disposal. You do not care about atomic commits, but coarse
versioning and backup is grave. For example, server configuration or
org-mode files.
In that case, git-sync will help you keep things in sync.
Unlike the myriad of scripts to do just that already available,
it follows the KISS principle: It is safe, small, requires nothing but
git and bash, but does not even try to shield you from git. It is
non-interactive, but will cautiously exit with a useful hint or error
if there is any kind of problem.
It is ultimately intended for git-savy people. As a rule of thumb, if
you know how to complete a failed rebase, you're fine.
Tested on msysgit and a real bash. In case you know bash scripting, it
will probably make your eyes bleed, but for some reason it works.
SUSE Package Hub 15 SP5 one-click install
Install git-sync
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP5-Standard-Pool
Package Hub 15 SP5
Dummy repo - this will fail
-
git-sync
Safe and simple one-script git synchronization
Suppose you have a set of text files you care about, multiple machines
to work on, and a central git repository (a.k.a. bare reporitory) at
your disposal. You do not care about atomic commits, but coarse
versioning and backup is grave. For example, server configuration or
org-mode files.
In that case, git-sync will help you keep things in sync.
Unlike the myriad of scripts to do just that already available,
it follows the KISS principle: It is safe, small, requires nothing but
git and bash, but does not even try to shield you from git. It is
non-interactive, but will cautiously exit with a useful hint or error
if there is any kind of problem.
It is ultimately intended for git-savy people. As a rule of thumb, if
you know how to complete a failed rebase, you're fine.
Tested on msysgit and a real bash. In case you know bash scripting, it
will probably make your eyes bleed, but for some reason it works.