SUSE Package Hub 15 one-click install
Install driverctl
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-Standard-Pool
Package Hub 15
Dummy repo - this will fail
-
driverctl
Device driver control utility
driverctl is a tool for manipulating and inspecting the system
device driver choices.
Devices are normally assigned to their sole designated kernel driver
by default. However in some situations it may be desireable to
override that default, for example to try an older driver to
work around a regression in a driver or to try an experimental alternative
driver. Another common use-case is pass-through drivers and driver
stubs to allow userspace to drive the device, such as in case of
virtualization.
driverctl integrates with udev to support overriding
driver selection for both cold- and hotplugged devices from the
moment of discovery, but can also change already assigned drivers,
assuming they are not in use by the system. The driver overrides
created by driverctl are persistent across system reboots
by default.
SUSE Package Hub 15 one-click install
Install driverctl
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-Standard-Pool
Package Hub 15
Dummy repo - this will fail
-
driverctl
Device driver control utility
driverctl is a tool for manipulating and inspecting the system
device driver choices.
Devices are normally assigned to their sole designated kernel driver
by default. However in some situations it may be desireable to
override that default, for example to try an older driver to
work around a regression in a driver or to try an experimental alternative
driver. Another common use-case is pass-through drivers and driver
stubs to allow userspace to drive the device, such as in case of
virtualization.
driverctl integrates with udev to support overriding
driver selection for both cold- and hotplugged devices from the
moment of discovery, but can also change already assigned drivers,
assuming they are not in use by the system. The driver overrides
created by driverctl are persistent across system reboots
by default.
SUSE Package Hub 15 SP1 one-click install
Install driverctl
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP1-Backports-Pool
Package Hub 15 SP1
Dummy repo - this will fail
-
driverctl
Device driver control utility
driverctl is a tool for manipulating and inspecting the system
device driver choices.
Devices are normally assigned to their sole designated kernel driver
by default. However in some situations it may be desireable to
override that default, for example to try an older driver to
work around a regression in a driver or to try an experimental alternative
driver. Another common use-case is pass-through drivers and driver
stubs to allow userspace to drive the device, such as in case of
virtualization.
driverctl integrates with udev to support overriding
driver selection for both cold- and hotplugged devices from the
moment of discovery, but can also change already assigned drivers,
assuming they are not in use by the system. The driver overrides
created by driverctl are persistent across system reboots
by default.
SUSE Package Hub 15 SP1 one-click install
Install driverctl
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP1-Backports-Pool
Package Hub 15 SP1
Dummy repo - this will fail
-
driverctl
Device driver control utility
driverctl is a tool for manipulating and inspecting the system
device driver choices.
Devices are normally assigned to their sole designated kernel driver
by default. However in some situations it may be desireable to
override that default, for example to try an older driver to
work around a regression in a driver or to try an experimental alternative
driver. Another common use-case is pass-through drivers and driver
stubs to allow userspace to drive the device, such as in case of
virtualization.
driverctl integrates with udev to support overriding
driver selection for both cold- and hotplugged devices from the
moment of discovery, but can also change already assigned drivers,
assuming they are not in use by the system. The driver overrides
created by driverctl are persistent across system reboots
by default.
SUSE Package Hub 15 SP2 one-click install
Install driverctl
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP2-Backports-Pool
Package Hub 15 SP2
Dummy repo - this will fail
-
driverctl
Device driver control utility
driverctl is a tool for manipulating and inspecting the system
device driver choices.
Devices are normally assigned to their sole designated kernel driver
by default. However in some situations it may be desireable to
override that default, for example to try an older driver to
work around a regression in a driver or to try an experimental alternative
driver. Another common use-case is pass-through drivers and driver
stubs to allow userspace to drive the device, such as in case of
virtualization.
driverctl integrates with udev to support overriding
driver selection for both cold- and hotplugged devices from the
moment of discovery, but can also change already assigned drivers,
assuming they are not in use by the system. The driver overrides
created by driverctl are persistent across system reboots
by default.
SUSE Package Hub 15 SP2 one-click install
Install driverctl
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP2-Backports-Pool
Package Hub 15 SP2
Dummy repo - this will fail
-
driverctl
Device driver control utility
driverctl is a tool for manipulating and inspecting the system
device driver choices.
Devices are normally assigned to their sole designated kernel driver
by default. However in some situations it may be desireable to
override that default, for example to try an older driver to
work around a regression in a driver or to try an experimental alternative
driver. Another common use-case is pass-through drivers and driver
stubs to allow userspace to drive the device, such as in case of
virtualization.
driverctl integrates with udev to support overriding
driver selection for both cold- and hotplugged devices from the
moment of discovery, but can also change already assigned drivers,
assuming they are not in use by the system. The driver overrides
created by driverctl are persistent across system reboots
by default.
SUSE Package Hub 15 SP3 one-click install
Install driverctl
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP3-Backports-Pool
Package Hub 15 SP3
Dummy repo - this will fail
-
driverctl
Device driver control utility
driverctl is a tool for manipulating and inspecting the system
device driver choices.
Devices are normally assigned to their sole designated kernel driver
by default. However in some situations it may be desireable to
override that default, for example to try an older driver to
work around a regression in a driver or to try an experimental alternative
driver. Another common use-case is pass-through drivers and driver
stubs to allow userspace to drive the device, such as in case of
virtualization.
driverctl integrates with udev to support overriding
driver selection for both cold- and hotplugged devices from the
moment of discovery, but can also change already assigned drivers,
assuming they are not in use by the system. The driver overrides
created by driverctl are persistent across system reboots
by default.
SUSE Package Hub 15 SP3 one-click install
Install driverctl
NOTE: This one-click installation requires that the SUSE Package Hub extension to already be enabled.
See http://packagehub.suse.com/how-to-use/ for information on enabling the Package Hub extension
If the extension is not enabled, this installation will fail while trying to enable an invalid repo.
This package might depend on packages from SUSE Linux Enterprise modules. If those modules are not enabled, a package dependency error will be encountered.
SUSE-PackageHub-15-SP3-Backports-Pool
Package Hub 15 SP3
Dummy repo - this will fail
-
driverctl
Device driver control utility
driverctl is a tool for manipulating and inspecting the system
device driver choices.
Devices are normally assigned to their sole designated kernel driver
by default. However in some situations it may be desireable to
override that default, for example to try an older driver to
work around a regression in a driver or to try an experimental alternative
driver. Another common use-case is pass-through drivers and driver
stubs to allow userspace to drive the device, such as in case of
virtualization.
driverctl integrates with udev to support overriding
driver selection for both cold- and hotplugged devices from the
moment of discovery, but can also change already assigned drivers,
assuming they are not in use by the system. The driver overrides
created by driverctl are persistent across system reboots
by default.